#
# $Source: /cvsroot/cantera/cantera/ext/f2c_libs/Makefile.in,v $
# $Author$
# $Revision$
# $Date$
#
# Unix makefile: see README.
# For C++, first "make hadd".
# If your compiler does not recognize ANSI C, add
#	-DKR_headers
# to the CFLAGS = line below.
# On Sun and other BSD systems that do not provide an ANSI sprintf, add
#	-DUSE_STRLEN
# to the CFLAGS = line below.
# On Linux systems, add
#	-DNON_UNIX_STDIO
# to the CFLAGS = line below.  For libf2c.so under Linux, also add
#	-fPIC
# to the CFLAGS = line below.

.SUFFIXES: .c .o .d

# the C compiler
CC = @CC@
SHELL = /bin/sh
do_ranlib = @DO_RANLIB@
do_stripsymbols = @HAVE_STRIPSYMBOLS@
PIC_FLAG=@PIC@

CFLAGS = @CFLAGS@ $(CXX_OPT) $(PIC_FLAG)

# Destination f2c lib located in Cantera's build directory
# -> Calling it ctf2c
BUILDINCDIR=../../build/include/cantera
F2C_LIB = @buildlib@/libctf2c.a
F2C_H   = $(BUILDINCDIR)/f2c.h

# compile, then strip unnecessary symbols
.c.o: f2c.h
	$(CC) -c -DSkip_f2c_Undefs $(CFLAGS) $*.c
ifeq ($(do_stripsymbols),yes)
	ld @ldemulationarg@ -r -x -o $*.xxx $*.o
	mv $*.xxx $*.o
endif

## Under Solaris (and other systems that do not understand ld -x),
## omit -x in the ld line above.
## If your system does not have the ld command, comment out
## or remove both the ld and mv lines above.

MISC =	f77vers.o i77vers.o main.o s_rnge.o abort_.o exit_.o getarg_.o iargc_.o\
	getenv_.o signal_.o s_stop.o s_paus.o system_.o cabs.o\
	derf_.o derfc_.o erf_.o erfc_.o sig_die.o uninit.o
POW =	pow_ci.o pow_dd.o pow_di.o pow_hh.o pow_ii.o pow_ri.o pow_zi.o pow_zz.o
CX =	c_abs.o c_cos.o c_div.o c_exp.o c_log.o c_sin.o c_sqrt.o
DCX =	z_abs.o z_cos.o z_div.o z_exp.o z_log.o z_sin.o z_sqrt.o
REAL =	r_abs.o r_acos.o r_asin.o r_atan.o r_atn2.o r_cnjg.o r_cos.o\
	r_cosh.o r_dim.o r_exp.o r_imag.o r_int.o\
	r_lg10.o r_log.o r_mod.o r_nint.o r_sign.o\
	r_sin.o r_sinh.o r_sqrt.o r_tan.o r_tanh.o
DBL =	d_abs.o d_acos.o d_asin.o d_atan.o d_atn2.o\
	d_cnjg.o d_cos.o d_cosh.o d_dim.o d_exp.o\
	d_imag.o d_int.o d_lg10.o d_log.o d_mod.o\
	d_nint.o d_prod.o d_sign.o d_sin.o d_sinh.o\
	d_sqrt.o d_tan.o d_tanh.o
INT =	i_abs.o i_dim.o i_dnnt.o i_indx.o i_len.o i_mod.o i_nint.o i_sign.o\
	lbitbits.o lbitshft.o
HALF =	h_abs.o h_dim.o h_dnnt.o h_indx.o h_len.o h_mod.o h_nint.o h_sign.o
CMP =	l_ge.o l_gt.o l_le.o l_lt.o hl_ge.o hl_gt.o hl_le.o hl_lt.o
EFL =	ef1asc_.o ef1cmc_.o
CHAR =	f77_aloc.o s_cat.o s_cmp.o s_copy.o
I77 =	backspac.o close.o dfe.o dolio.o due.o endfile.o err.o\
	fmt.o fmtlib.o ftell_.o iio.o ilnw.o inquire.o lread.o lwrite.o\
	open.o rdfmt.o rewind.o rsfe.o rsli.o rsne.o sfe.o sue.o\
	typesize.o uio.o util.o wref.o wrtfmt.o wsfe.o wsle.o wsne.o xwsne.o
QINT =	pow_qq.o qbitbits.o qbitshft.o ftell64_.o
TIME =	dtime_.o etime_.o

# If you get an error compiling dtime_.c or etime_.c, try adding
# -DUSE_CLOCK to the CFLAGS assignment above; if that does not work,
# omit $(TIME) from OFILES = assignment below.

# To get signed zeros in write statements on IEEE-arithmetic systems,
# add -DSIGNED_ZEROS to the CFLAGS assignment below and add signbit.o
# to the end of the OFILES = assignment below.

# For INTEGER*8 support (which requires system-dependent adjustments to
# f2c.h), add $(QINT) to the OFILES = assignment below...

OFILES = $(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) \
	$(HALF) $(CMP) $(EFL) $(CHAR) $(I77) $(TIME)

all: f2c.h signal1.h sysdep1.h $(F2C_LIB) $(F2C_H)

$(F2C_LIB): $(OFILES)
	@ARCHIVE@ $(F2C_LIB) $?
ifeq ($(do_ranlib),1)
	@RANLIB@ $(F2C_LIB)
endif

$(F2C_H): f2c.h
	@INSTALL@ -d $(BUILDINCDIR)
	@INSTALL@ -c f2c.h $(F2C_H)

### If your system lacks ranlib, you don't need it; see README.

f77vers.o: f77vers.c
	$(CC) $(CFLAGS) -c f77vers.c

i77vers.o: i77vers.c
	$(CC) $(CFLAGS) -c i77vers.c

# To get an "f2c.h" for use with "f2c -C++", first "make hadd"
hadd: f2c.h0 f2ch.add
	cat f2c.h0 f2ch.add >f2c.h

# For use with "f2c" and "f2c -A":
f2c.h: f2c.h0
	cp f2c.h0 f2c.h

# You may need to adjust signal1.h and sysdep1.h suitably for your system...
signal1.h: signal1.h0
	cp signal1.h0 signal1.h

sysdep1.h: sysdep1.h0
	cp sysdep1.h0 sysdep1.h

# If your system lacks onexit() and you are not using an
# ANSI C compiler, then you should uncomment the following
# two lines (for compiling main.o):
#main.o: main.c
#	$(CC) -c -DNO_ONEXIT -DSkip_f2c_Undefs main.c
# On at least some Sun systems, it is more appropriate to
# uncomment the following two lines:
#main.o: main.c
#	$(CC) -c -Donexit=on_exit -DSkip_f2c_Undefs main.c

clean:
	$(RM) $(F2C_LIB) *.o *.d arith.h signal1.h sysdep1.h $(F2C_H)

$(OFILES):      f2c.h
backspac.o:	fio.h
close.o:	fio.h
dfe.o:		fio.h
dfe.o:		fmt.h
due.o:		fio.h
endfile.o:	fio.h rawio.h
err.o:		fio.h rawio.h
fmt.o:		fio.h
fmt.o:		fmt.h
iio.o:		fio.h
iio.o:		fmt.h
ilnw.o:		fio.h
ilnw.o:		lio.h
inquire.o:	fio.h
lread.o:	fio.h
lread.o:	fmt.h
lread.o:	lio.h
lread.o:	fp.h
lwrite.o:	fio.h
lwrite.o:	fmt.h
lwrite.o:	lio.h
open.o:		fio.h rawio.h
rdfmt.o:	fio.h
rdfmt.o:	fmt.h
rdfmt.o:	fp.h
rewind.o:	fio.h
rsfe.o:		fio.h
rsfe.o:		fmt.h
rsli.o:		fio.h
rsli.o:		lio.h
rsne.o:		fio.h
rsne.o:		lio.h
sfe.o:		fio.h
signbit.o:	arith.h
sue.o:		fio.h
uio.o:		fio.h
uninit.o:	arith.h
util.o:		fio.h
wref.o:		fio.h
wref.o:		fmt.h
wref.o:		fp.h
 wrtfmt.o:	fio.h
wrtfmt.o:	fmt.h
wsfe.o:		fio.h
wsfe.o:		fmt.h
wsle.o:		fio.h
wsle.o:		fmt.h
wsle.o:		lio.h
wsne.o:		fio.h
wsne.o:		lio.h
xwsne.o:	fio.h
xwsne.o:	lio.h
xwsne.o:	fmt.h

arith.h: arithchk.c
	$(CC) $(CFLAGS) -o chkll -DNO_FPINIT arithchk.c -lm ||\
	 $(CC) -DNO_LONG_LONG $(CFLAGS) -o chkll -DNO_FPINIT arithchk.c -lm
	./chkll >arith.h
	rm -f chkll* arithchk.o

$(OFILES): Makefile

# depends target -> already in the Makefile
depends: