From e1e538d697cd458a9997677c24fb7ce38159bd78 Mon Sep 17 00:00:00 2001 From: Dave Peticolas Date: Wed, 20 Sep 2000 08:23:45 +0000 Subject: [PATCH] Remove more generated files. git-svn-id: svn+ssh://svn.gnucash.org/repo/gnucash/trunk@2905 57a11ea4-9604-0410-9ed3-97b8803252fd --- .cvsignore | 11 +- ABOUT-NLS | 226 ----------------------------------- COPYING | 339 ----------------------------------------------------- INSTALL | 182 ---------------------------- install-sh | 238 ------------------------------------- 5 files changed, 8 insertions(+), 988 deletions(-) delete mode 100644 ABOUT-NLS delete mode 100644 COPYING delete mode 100644 INSTALL delete mode 100644 install-sh diff --git a/.cvsignore b/.cvsignore index d40b353c25..f29581c585 100644 --- a/.cvsignore +++ b/.cvsignore @@ -1,3 +1,6 @@ +ABOUT-NLS +COPYING +INSTALL Makefile Makefile.in aclocal.m4 @@ -9,14 +12,16 @@ config.log config.status config.h config.h.in +install-sh +libtool ltconfig ltmain.sh +make-gnucash-patch +stamp-h +stamp-h.in *.tar.gz *.log *.patch *.diff *.diffs *.xac.*.xac -make-gnucash-patch -stamp-h -libtool diff --git a/ABOUT-NLS b/ABOUT-NLS deleted file mode 100644 index c7130f17a5..0000000000 --- a/ABOUT-NLS +++ /dev/null @@ -1,226 +0,0 @@ -Notes on the Free Translation Project -************************************* - - Free software is going international! The Free Translation Project -is a way to get maintainers of free software, translators, and users all -together, so that will gradually become able to speak many languages. -A few packages already provide translations for their messages. - - If you found this `ABOUT-NLS' file inside a distribution, you may -assume that the distributed package does use GNU `gettext' internally, -itself available at your nearest GNU archive site. But you do *not* -need to install GNU `gettext' prior to configuring, installing or using -this package with messages translated. - - Installers will find here some useful hints. These notes also -explain how users should proceed for getting the programs to use the -available translations. They tell how people wanting to contribute and -work at translations should contact the appropriate team. - - When reporting bugs in the `intl/' directory or bugs which may be -related to internationalization, you should tell about the version of -`gettext' which is used. The information can be found in the -`intl/VERSION' file, in internationalized packages. - -One advise in advance -===================== - - If you want to exploit the full power of internationalization, you -should configure it using - - ./configure --with-included-gettext - -to force usage of internationalizing routines provided within this -package, despite the existence of internationalizing capabilities in the -operating system where this package is being installed. So far, only -the `gettext' implementation in the GNU C library version 2 provides as -many features (such as locale alias or message inheritance) as the -implementation here. It is also not possible to offer this additional -functionality on top of a `catgets' implementation. Future versions of -GNU `gettext' will very likely convey even more functionality. So it -might be a good idea to change to GNU `gettext' as soon as possible. - - So you need not provide this option if you are using GNU libc 2 or -you have installed a recent copy of the GNU gettext package with the -included `libintl'. - -INSTALL Matters -=============== - - Some packages are "localizable" when properly installed; the -programs they contain can be made to speak your own native language. -Most such packages use GNU `gettext'. Other packages have their own -ways to internationalization, predating GNU `gettext'. - - By default, this package will be installed to allow translation of -messages. It will automatically detect whether the system provides -usable `catgets' (if using this is selected by the installer) or -`gettext' functions. If neither is available, the GNU `gettext' own -library will be used. This library is wholly contained within this -package, usually in the `intl/' subdirectory, so prior installation of -the GNU `gettext' package is *not* required. Installers may use -special options at configuration time for changing the default -behaviour. The commands: - - ./configure --with-included-gettext - ./configure --with-catgets - ./configure --disable-nls - -will respectively bypass any pre-existing `catgets' or `gettext' to use -the internationalizing routines provided within this package, enable -the use of the `catgets' functions (if found on the locale system), or -else, *totally* disable translation of messages. - - When you already have GNU `gettext' installed on your system and run -configure without an option for your new package, `configure' will -probably detect the previously built and installed `libintl.a' file and -will decide to use this. This might be not what is desirable. You -should use the more recent version of the GNU `gettext' library. I.e. -if the file `intl/VERSION' shows that the library which comes with this -package is more recent, you should use - - ./configure --with-included-gettext - -to prevent auto-detection. - - By default the configuration process will not test for the `catgets' -function and therefore they will not be used. The reasons are already -given above: the emulation on top of `catgets' cannot provide all the -extensions provided by the GNU `gettext' library. If you nevertheless -want to use the `catgets' functions use - - ./configure --with-catgets - -to enable the test for `catgets' (this causes no harm if `catgets' is -not available on your system). If you really select this option we -would like to hear about the reasons because we cannot think of any -good one ourself. - - Internationalized packages have usually many `po/LL.po' files, where -LL gives an ISO 639 two-letter code identifying the language. Unless -translations have been forbidden at `configure' time by using the -`--disable-nls' switch, all available translations are installed -together with the package. However, the environment variable `LINGUAs' -may be set, prior to configuration, to limit the installed set. -`LINGUAS' should then contain a space separated list of two-letter -codes, stating which languages are allowed. - -Using This Package -================== - - As a user, if your language has been installed for this package, you -only have to set the `LANG' environment variable to the appropriate -ISO 639 `LL' two-letter code prior to using the programs in the -package. For example, let's suppose that you speak German. At the -shell prompt, merely execute `setenv LANG de' (in `csh'), -`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash'). This -can be done from your `.login' or `.profile' file, once and for all. - - An operating system might already offer message localization for -many of its programs, while other programs have been installed locally -with the full capabilities of GNU `gettext'. Just using `gettext' -extended syntax for `LANG' would break proper localization of already -available operating system programs. In this case, users should set -both `LANGUAGE' and `LANG' variables in their environment, as programs -using GNU `gettext' give preference to `LANGUAGE'. For example, some -Swedish users would rather read translations in German than English for -when Swedish is not available. This is easily accomplished by setting -`LANGUAGE' to `sv:de' while leaving `LANG' to `sv'. - -Translating Teams -================= - - For the Free Translation Project to be a success, we need interested -people who like their own language and write it well, and who are also -able to synergize with other translators speaking the same language. -Each translation team has its own mailing list, courtesy of Linux -International. You may reach your translation team at the address -`LL@li.org', replacing LL by the two-letter ISO 639 code for your -language. Language codes are *not* the same as the country codes given -in ISO 3166. The following translation teams exist, as of December -1997: - - Chinese `zh', Czech `cs', Danish `da', Dutch `nl', English `en', - Esperanto `eo', Finnish `fi', French `fr', German `de', Hungarian - `hu', Irish `ga', Italian `it', Indonesian `id', Japanese `ja', - Korean `ko', Latin `la', Norwegian `no', Persian `fa', Polish - `pl', Portuguese `pt', Russian `ru', Slovenian `sl', Spanish `es', - Swedish `sv', and Turkish `tr'. - -For example, you may reach the Chinese translation team by writing to -`zh@li.org'. - - If you'd like to volunteer to *work* at translating messages, you -should become a member of the translating team for your own language. -The subscribing address is *not* the same as the list itself, it has -`-request' appended. For example, speakers of Swedish can send a -message to `sv-request@li.org', having this message body: - - subscribe - - Keep in mind that team members are expected to participate -*actively* in translations, or at solving translational difficulties, -rather than merely lurking around. If your team does not exist yet and -you want to start one, or if you are unsure about what to do or how to -get started, please write to `translation@iro.umontreal.ca' to reach the -coordinator for all translator teams. - - The English team is special. It works at improving and uniformizing -the terminology in use. Proven linguistic skill are praised more than -programming skill, here. - -Available Packages -================== - - Languages are not equally supported in all packages. The following -matrix shows the current state of internationalization, as of December -1997. The matrix shows, in regard of each package, for which languages -PO files have been submitted to translation coordination. - - Ready PO files cs da de en es fi fr it ja ko nl no pl pt ru sl sv - .----------------------------------------------------. - bash | [] [] [] | 3 - bison | [] [] [] | 3 - clisp | [] [] [] [] | 4 - cpio | [] [] [] [] [] [] | 6 - diffutils | [] [] [] [] [] | 5 - enscript | [] [] [] [] [] [] | 6 - fileutils | [] [] [] [] [] [] [] [] [] [] | 10 - findutils | [] [] [] [] [] [] [] [] [] | 9 - flex | [] [] [] [] | 4 - gcal | [] [] [] [] [] | 5 - gettext | [] [] [] [] [] [] [] [] [] [] [] | 12 - grep | [] [] [] [] [] [] [] [] [] [] | 10 - hello | [] [] [] [] [] [] [] [] [] [] [] | 11 - id-utils | [] [] [] | 3 - indent | [] [] [] [] [] | 5 - libc | [] [] [] [] [] [] [] | 7 - m4 | [] [] [] [] [] [] | 6 - make | [] [] [] [] [] [] | 6 - music | [] [] | 2 - ptx | [] [] [] [] [] [] [] [] | 8 - recode | [] [] [] [] [] [] [] [] [] | 9 - sh-utils | [] [] [] [] [] [] [] [] | 8 - sharutils | [] [] [] [] [] [] | 6 - tar | [] [] [] [] [] [] [] [] [] [] [] | 11 - texinfo | [] [] [] | 3 - textutils | [] [] [] [] [] [] [] [] [] | 9 - wdiff | [] [] [] [] [] [] [] [] | 8 - `----------------------------------------------------' - 17 languages cs da de en es fi fr it ja ko nl no pl pt ru sl sv - 27 packages 6 4 25 1 18 1 26 2 1 12 20 9 19 7 4 7 17 179 - - Some counters in the preceding matrix are higher than the number of -visible blocks let us expect. This is because a few extra PO files are -used for implementing regional variants of languages, or language -dialects. - - For a PO file in the matrix above to be effective, the package to -which it applies should also have been internationalized and -distributed as such by its maintainer. There might be an observable -lag between the mere existence a PO file and its wide availability in a -distribution. - - If December 1997 seems to be old, you may fetch a more recent copy -of this `ABOUT-NLS' file on most GNU archive sites. - diff --git a/COPYING b/COPYING deleted file mode 100644 index a43ea2126f..0000000000 --- a/COPYING +++ /dev/null @@ -1,339 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 675 Mass Ave, Cambridge, MA 02139, USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - Appendix: How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) 19yy - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) 19yy name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - , 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/INSTALL b/INSTALL deleted file mode 100644 index b42a17ac46..0000000000 --- a/INSTALL +++ /dev/null @@ -1,182 +0,0 @@ -Basic Installation -================== - - These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure - -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. - -Installation Names -================== - - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: - CPU-COMPANY-SYSTEM - -See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the host type. - - If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Operation Controls -================== - - `configure' recognizes the following options to control how it -operates. - -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. - -`--help' - Print a summary of the options to `configure', and exit. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`configure' also accepts some other, not widely useful, options. diff --git a/install-sh b/install-sh deleted file mode 100644 index 89fc9b098b..0000000000 --- a/install-sh +++ /dev/null @@ -1,238 +0,0 @@ -#! /bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -tranformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0