vim-patch:036986f1507d

Update runtime files.

036986f150

runtime/doc/editing.txt

@@ -236,7 +236,7 @@ If you want to keep the changed buffer without saving it, switch on the
 
 							*:vie* *:view*
 :vie[w][!] [++opt] [+cmd] file
-			When used in Ex mode: Leave |Ex mode|, go back to
+			When used in Ex mode: Leave |Ex-mode|, go back to
 			Normal mode.  Otherwise same as |:edit|, but set
 			'readonly' option for this buffer.
 

runtime/doc/eval.txt

@@ -1870,6 +1870,8 @@ v:termresponse	The escape sequence returned by the terminal for the DA
 
 					*v:testing* *testing-variable*
 v:testing	Must be set before using `test_garbagecollect_now()`.
+		Also, when set certain error messages won't be shown for 2
+		seconds. (e.g. "'dictionary' option is empty") 
 
 				*v:this_session* *this_session-variable*
 v:this_session	Full filename of the last loaded or saved session file.  See

runtime/doc/map.txt

@@ -556,7 +556,8 @@ Upper and lowercase differences are ignored.
 
 							*map-comments*
 It is not possible to put a comment after these commands, because the '"'
-character is considered to be part of the {lhs} or {rhs}.
+character is considered to be part of the {lhs} or {rhs}. However, one can
+use |", since this starts a new, empty command with a comment.
 
 							*map_bar* *map-bar*
 Since the '|' character is used to separate a map command from the next

runtime/doc/motion.txt

@@ -184,7 +184,7 @@ l		or					*l*
 
 							*$* *<End>* *<kEnd>*
 $  or <End>		To the end of the line.  When a count is given also go
-			[count - 1] lines downward |inclusive|.
+			[count - 1] lines downward. |inclusive| motion.
 			In Visual mode the cursor goes to just after the last
 			character in the line.
 			When 'virtualedit' is active, "$" may move the cursor

runtime/doc/options.txt

@@ -959,8 +959,8 @@ A jump table for the options with a short description can be found at |Q_op|.
 	wildmode    More matches in |cmdline-completion| available
 		    (depends on the 'wildmode' setting).
 
-	This is most useful, to fine tune when in insert mode the bell should
+	This is most useful to fine tune when in Insert mode the bell should
-	be rung. For normal mode and ex commands, the bell is often rung to
+	be rung. For Normal mode and Ex commands, the bell is often rung to
 	indicate that an error occurred. It can be silenced by adding the
 	"error" keyword.
 
@@ -3099,6 +3099,28 @@ A jump table for the options with a short description can be found at |Q_op|.
 			global
 	The builtin |highlight-groups| cannot be changed.
 
+						*'history'* *'hi'*
+'history' 'hi'		number	(Vim default: 10000, Vi default: 0)
+			global
+	A history of ":" commands, and a history of previous search patterns
+	is remembered.  This option decides how many entries may be stored in
+	each of these histories (see |cmdline-editing|).
+	The maximum value is 10000.
+
+					 *'hkmap'* *'hk'* *'nohkmap'* *'nohk'*
+'hkmap' 'hk'		boolean (default off)
+			global
+	When on, the keyboard is mapped for the Hebrew character set.
+	Normally you would set 'allowrevins' and use CTRL-_ in insert mode to
+	toggle this option.  See |rileft.txt|.
+
+				 *'hkmapp'* *'hkp'* *'nohkmapp'* *'nohkp'*
+'hkmapp' 'hkp'		boolean (default off)
+			global
+	When on, phonetic keyboard mapping is used.  'hkmap' must also be on.
+	This is useful if you have a non-Hebrew keyboard.
+	See |rileft.txt|.
+
 				 *'hlsearch'* *'hls'* *'nohlsearch'* *'nohls'*
 'hlsearch' 'hls'	boolean	(default on)
 			global
@@ -3122,28 +3144,6 @@ A jump table for the options with a short description can be found at |Q_op|.
 	You can specify whether the highlight status is restored on startup
 	with the 'h' flag in 'shada' |shada-h|.
 
-						*'history'* *'hi'*
-'history' 'hi'		number	(Vim default: 10000, Vi default: 0)
-			global
-	A history of ":" commands, and a history of previous search patterns
-	is remembered.  This option decides how many entries may be stored in
-	each of these histories (see |cmdline-editing|).
-	The maximum value is 10000.
-
-					 *'hkmap'* *'hk'* *'nohkmap'* *'nohk'*
-'hkmap' 'hk'		boolean (default off)
-			global
-	When on, the keyboard is mapped for the Hebrew character set.
-	Normally you would set 'allowrevins' and use CTRL-_ in insert mode to
-	toggle this option.  See |rileft.txt|.
-
-				 *'hkmapp'* *'hkp'* *'nohkmapp'* *'nohkp'*
-'hkmapp' 'hkp'		boolean (default off)
-			global
-	When on, phonetic keyboard mapping is used.  'hkmap' must also be on.
-	This is useful if you have a non-Hebrew keyboard.
-	See |rileft.txt|.
-
 						*'icon'* *'noicon'*
 'icon'			boolean	(default off, on when title can be restored)
 			global

runtime/doc/pattern.txt

@@ -856,8 +856,8 @@ $	At end of pattern or in front of "\|", "\)" or "\n" ('magic' on):
 	inside the Visual area put it at the start and just before the end of
 	the pattern, e.g.: >
 		/\%Vfoo.*ba\%Vr
-<	This works if "foo bar" (or more) was Visually selected. This: >
+<	This also works if only "foo bar" was Visually selected. This: >
-		/\%Vfoo.*ba\%Vr
+		/\%Vfoo.*bar\%V
 <	would match "foo bar" if the Visual selection continues after the "r".
 	Only works for the current buffer.
 

runtime/doc/quickfix.txt

@@ -32,10 +32,13 @@ The 'errorformat' option should be set to match the error messages from your
 compiler (see |errorformat| below).
 
 						*location-list* *E776*
-A location list is similar to a quickfix list and contains a list of positions
+A location list is a window-local quickfix list. You get one after commands
-in files.  A location list is associated with a window and each window can
+like `:lvimgrep`, `:lgrep`, `:lhelpgrep`, `:lmake`, etc., which create a
-have a separate location list.  A location list can be associated with only
+location list instead of a quickfix list as the corresponding `:vimgrep`,
-one window.  The location list is independent of the quickfix list.
+`:grep`, `:helpgrep`, `:make` do.
+A location list is associated with a window and each window can have a
+separate location list.  A location list can be associated with only one
+window.  The location list is independent of the quickfix list.
 
 When a window with a location list is split, the new window gets a copy of the
 location list.  When there are no longer any references to a location list,

runtime/doc/usr_02.txt

@@ -543,7 +543,7 @@ Summary: 					*help-summary*  >
 8) Ex-commands always start with ":", so to go to the :s command help: >
 	:help :s
 
-9) Commands specifically for debugging start with ">".  To go to to the help
+9) Commands specifically for debugging start with ">".  To go to the help
    for the "cont" debug command: >
 	:help >cont
 

runtime/filetype.vim

@@ -1,7 +1,7 @@
 " Vim support file to detect file types
 "
 " Maintainer:	Bram Moolenaar <Bram@vim.org>
-" Last Change:	2017 Mar 04
+" Last Change:	2017 Mar 13
 
 " Listen very carefully, I will say this only once
 if exists("did_load_filetypes")
@@ -1362,6 +1362,9 @@ endfunc
 " Not Quite C
 au BufNewFile,BufRead *.nqc			setf nqc
 
+" NSE - Nmap Script Engine - uses Lua syntax
+au BufNewFile,BufRead *.nse			setf lua
+
 " NSIS
 au BufNewFile,BufRead *.nsi,*.nsh		setf nsis
 
@@ -2277,7 +2280,7 @@ au BufNewFile,BufRead .tidyrc,tidyrc		setf tidy
 au BufNewFile,BufRead *.tf,.tfrc,tfrc		setf tf
 
 " tmux configuration
-au BufNewFile,BufRead tmux*.conf		setf tmux
+au BufNewFile,BufRead {.,}tmux*.conf		setf tmux
 
 " TPP - Text Presentation Program
 au BufNewFile,BufReadPost *.tpp			setf tpp

runtime/ftplugin/hamster.vim

@@ -1,8 +1,8 @@
 " Vim filetype plugin
 " Language:    Hamster Script
 " Version:     2.0.6.0
-" Maintainer:  David Fishburn <fishburn@ianywhere.com>
+" Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
-" Last Change: Wed Nov 08 2006 12:03:09 PM
+" Last Change: 2017 Mar 07
 
 " Only do this when not done yet for this buffer
 if exists("b:did_ftplugin")
@@ -13,6 +13,7 @@ endif
 let b:did_ftplugin = 1
 
 let s:cpo_save = &cpo
+set cpo&vim
 set cpo-=C
 
 let b:undo_ftplugin = "setl fo< com< tw< commentstring<"

runtime/ftplugin/sql.vim

@@ -1,8 +1,8 @@
 " SQL filetype plugin file
 " Language:    SQL (Common for Oracle, Microsoft SQL Server, Sybase)
-" Version:     11.0
+" Version:     12.0
 " Maintainer:  David Fishburn <dfishburn dot vim at gmail dot com>
-" Last Change: 2013 May 13
+" Last Change: 2017 Mar 07
 " Download:    http://vim.sourceforge.net/script.php?script_id=454
 
 " For more details please use:
@@ -36,6 +36,14 @@
 "
 " History
 "
+" Version 12.0 (April 2013)
+"
+" NF: Added support for "BEGIN TRY ... END TRY ... BEGIN CATCH ... END CATCH
+" BF: This plugin is designed to be used with other plugins to enable the 
+"     SQL completion with Perl, Python, Java, ...  The loading mechanism 
+"     was not checking if the SQL objects were created, which can lead to 
+"     the plugin not loading the SQL support.
+"
 " Version 11.0 (May 2013)
 "
 " NF: Updated to use SyntaxComplete's new regex support for syntax groups.
@@ -80,15 +88,17 @@
 
 
 " Only do this when not done yet for this buffer
-if exists("b:did_ftplugin")
+" This ftplugin can be used with other ftplugins.  So ensure loading
-  finish
+" happens if all elements of this plugin have not yet loaded.
+if exists("b:did_ftplugin") && exists("b:current_ftplugin") && b:current_ftplugin == 'sql'
+    finish
 endif
 
 let s:save_cpo = &cpo
 set cpo&vim
 
 " Disable autowrapping for code, but enable for comments
-" t	Auto-wrap text using textwidth
+" t     Auto-wrap text using textwidth
 " c     Auto-wrap comments using textwidth, inserting the current comment
 "       leader automatically.
 setlocal formatoptions-=t
@@ -171,6 +181,9 @@ if !exists("*SQL_SetType")
         if exists("b:current_syntax")
             " echomsg 'SQLSetType - clearing syntax'
             syntax clear
+            if exists("b:current_syntax")
+                unlet b:current_syntax
+            endif
         endif
         if exists("b:did_indent")
             " echomsg 'SQLSetType - clearing indent'
@@ -187,7 +200,7 @@ if !exists("*SQL_SetType")
         " Do not specify a buffer local variable if it is
         " the default value
         if new_sql_type == 'sql'
-          let new_sql_type = 'sqloracle'
+            let new_sql_type = 'sqloracle'
         endif
         let b:sql_type_override = new_sql_type
 
@@ -234,25 +247,26 @@ if exists("b:sql_type_override")
     " echo 'sourcing buffer ftplugin/'.b:sql_type_override.'.vim'
     if globpath(&runtimepath, 'ftplugin/'.b:sql_type_override.'.vim') != ''
         exec 'runtime ftplugin/'.b:sql_type_override.'.vim'
-    " else
+        " else
-    "     echomsg 'ftplugin/'.b:sql_type_override.' not exist, using default'
+        "     echomsg 'ftplugin/'.b:sql_type_override.' not exist, using default'
     endif
 elseif exists("g:sql_type_default")
     " echo 'sourcing global ftplugin/'.g:sql_type_default.'.vim'
     if globpath(&runtimepath, 'ftplugin/'.g:sql_type_default.'.vim') != ''
         exec 'runtime ftplugin/'.g:sql_type_default.'.vim'
-    " else
+        " else
-    "     echomsg 'ftplugin/'.g:sql_type_default.'.vim not exist, using default'
+        "     echomsg 'ftplugin/'.g:sql_type_default.'.vim not exist, using default'
     endif
 endif
 
 " If the above runtime command succeeded, do not load the default settings
-if exists("b:did_ftplugin")
+" as they should have already been loaded from a previous run.
-  finish
+if exists("b:did_ftplugin") && exists("b:current_ftplugin") && b:current_ftplugin == 'sql'
+    finish
 endif
 
 let b:undo_ftplugin = "setl comments< formatoptions< define< omnifunc<" .
-		    \ " | unlet! b:browsefilter b:match_words"
+            \ " | unlet! b:browsefilter b:match_words"
 
 " Don't load another plugin for this buffer
 let b:did_ftplugin     = 1
@@ -261,7 +275,7 @@ let b:current_ftplugin = 'sql'
 " Win32 can filter files in the browse dialog
 if has("gui_win32") && !exists("b:browsefilter")
     let b:browsefilter = "SQL Files (*.sql)\t*.sql\n" .
-	  \ "All Files (*.*)\t*.*\n"
+                \ "All Files (*.*)\t*.*\n"
 endif
 
 " Some standard expressions for use with the matchit strings
@@ -312,14 +326,24 @@ if !exists("b:match_words")
     " WHEN column_not_found THEN
     " WHEN OTHERS THEN
     "
+    " begin try
+    " end try
+    " begin catch
+    " end catch
+    "
     " create[ or replace] procedure|function|event
-                " \ '^\s*\<\%(do\|for\|while\|loop\)\>.*:'.
+    " \ '^\s*\<\%(do\|for\|while\|loop\)\>.*:'.
 
     " For ColdFusion support
     setlocal matchpairs+=<:>
     let b:match_words = &matchpairs .
-		\ ',\<begin\>:\<end\>\W*$,'.
+                \ ',\%(\<begin\)\%(\s\+\%(try\|catch\)\>\)\@!:\<end\>\W*$,'.
-		\
+                \
+                \ '\<begin\s\+try\>:'.
+                \ '\<end\s\+try\>:'.
+                \ '\<begin\s\+catch\>:'.
+                \ '\<end\s\+catch\>,'.
+                \
                 \ s:notend . '\<if\>:'.
                 \ '\<elsif\>\|\<elseif\>\|\<else\>:'.
                 \ '\<end\s\+if\>,'.
@@ -339,14 +363,14 @@ if !exists("b:match_words")
                 \ '\%(\<create\s\+' . s:or_replace . '\)\?'.
                 \ '\%(function\|procedure\|event\):'.
                 \ '\<returns\?\>'
-                " \ '\<begin\>\|\<returns\?\>:'.
+    " \ '\<begin\>\|\<returns\?\>:'.
-                " \ '\<end\>\(;\)\?\s*$'
+    " \ '\<end\>\(;\)\?\s*$'
-                " \ '\<exception\>:'.s:when_no_matched_or_others.
+    " \ '\<exception\>:'.s:when_no_matched_or_others.
-                " \ ':\<when\s\+others\>,'.
+    " \ ':\<when\s\+others\>,'.
-		"
+    "
-                " \ '\%(\<exception\>\|\%('. s:notend . '\<case\>\)\):'.
+    " \ '\%(\<exception\>\|\%('. s:notend . '\<case\>\)\):'.
-                " \ '\%(\<default\>\|'.s:when_no_matched_or_others.'\):'.
+    " \ '\%(\<default\>\|'.s:when_no_matched_or_others.'\):'.
-                " \ '\%(\%(\<when\s\+others\>\)\|\<end\s\+case\>\),' .
+    " \ '\%(\%(\<when\s\+others\>\)\|\<end\s\+case\>\),' .
 endif
 
 " Define how to find the macro definition of a variable using the various

runtime/ftplugin/tmux.vim

@@ -1,7 +1,8 @@
 " Vim filetype plugin file
-" Language:	Tmux config
+" Language: 	tmux(1) configuration file
-" Maintainer:	Eric Pruitt <eric.pruitt@gmail.com>
+" URL: 		https://github.com/ericpruitt/tmux.vim/
-" Last Change:  2017 Mar 04
+" Maintainer: 	Eric Pruitt <eric.pruitt@gmail.com>
+" Last Changed: 2017 Mar 10
 
 if exists("b:did_ftplugin")
   finish

runtime/indent/dtd.vim

@@ -84,7 +84,7 @@ function GetDTDIndent()
 
   let [declaration, end] = s:lex1(line, col)
   if declaration == ""
-    return indent + &sw
+    return indent + shiftwidth()
   elseif declaration == '--'
     " We’re looking at a comment.  Now, simply determine if the comment is
     " terminated or not.  If it isn’t, let Vim take care of that using
@@ -100,7 +100,7 @@ function GetDTDIndent()
     " Check for element name.  If none exists, indent one level.
     let [name, end] = s:lex(line, end)
     if name == ""
-      return indent + &sw
+      return indent + shiftwidth()
     endif
 
     " Check for token following element name.  This can be a specification of
@@ -113,7 +113,7 @@ function GetDTDIndent()
       let n += 1
     endwhile
     if token == ""
-      return indent + &sw
+      return indent + shiftwidth()
     endif
 
     " Next comes the content model.  If the token we’ve found isn’t a
@@ -148,7 +148,7 @@ function GetDTDIndent()
           return indent
         endif
         " TODO: Should use s:lex here on getline(v:lnum) and check for >.
-        return getline(v:lnum) =~ '^\s*>' || count(values(seen), 0) == 0 ? indent : (indent + &sw)
+        return getline(v:lnum) =~ '^\s*>' || count(values(seen), 0) == 0 ? indent : (indent + shiftwidth())
       endif
 
       " If we’ve seen an addition or exception already and this is of the same
@@ -167,7 +167,7 @@ function GetDTDIndent()
     " Check for element name.  If none exists, indent one level.
     let [name, end] = s:lex(line, end)
     if name == ""
-      return indent + &sw
+      return indent + shiftwidth()
     endif
 
     " Check for any number of attributes.
@@ -180,7 +180,7 @@ function GetDTDIndent()
       let [name, end] = s:lex(line, end)
       if name == ""
         " TODO: Should use s:lex here on getline(v:lnum) and check for >.
-        return getline(v:lnum) =~ '^\s*>' ? indent : (indent + &sw)
+        return getline(v:lnum) =~ '^\s*>' ? indent : (indent + shiftwidth())
       elseif name == ">"
         return indent
       endif
@@ -194,14 +194,14 @@ function GetDTDIndent()
       " (CDATA|NMTOKEN|NMTOKENS|ID|IDREF|IDREFS|ENTITY|ENTITIES)?
       let [value, end] = s:lex(line, end, '^\%((\|[^[:space:]]\+\)')
       if value == ""
-        return indent + &sw * 2
+        return indent + shiftwidth() * 2
       elseif value == 'NOTATION'
         " If this is a enumerated value based on notations, read another token
         " for the actual value.  If it doesn’t exist, indent three levels.
         " TODO: If validating according to above, value must be equal to '('.
         let [value, end] = s:lex(line, end, '^\%((\|[^[:space:]]\+\)')
         if value == ""
-          return indent + &sw * 3
+          return indent + shiftwidth() * 3
         endif
       endif
 
@@ -216,13 +216,13 @@ function GetDTDIndent()
       " two levels.
       let [default, end] = s:lex(line, end, '^\%("\_[^"]*"\|#\(REQUIRED\|IMPLIED\|FIXED\)\)')
       if default == ""
-        return indent + &sw * 2
+        return indent + shiftwidth() * 2
       elseif default == '#FIXED'
         " We need to look for the fixed value.  If non exists, indent three
         " levels.
         let [default, end] = s:lex(line, end, '^"\_[^"]*"')
         if default == ""
-          return indent + &sw * 3
+          return indent + shiftwidth() * 3
         endif
       endif
     endwhile
@@ -233,11 +233,11 @@ function GetDTDIndent()
     " again, if none exists, indent one level.
     let [name, end] = s:lex(line, end)
     if name == ""
-      return indent + &sw
+      return indent + shiftwidth()
     elseif name == '%'
       let [name, end] = s:lex(line, end)
       if name == ""
-        return indent + &sw
+        return indent + shiftwidth()
       endif
     endif
 
@@ -256,27 +256,27 @@ function GetDTDIndent()
     " we’re now done with this entity.
     let [value, end] = s:lex(line, end)
     if value == ""
-      return indent + &sw
+      return indent + shiftwidth()
     elseif value == 'SYSTEM' || value == 'PUBLIC'
       let [quoted_string, end] = s:lex(line, end, '\%("[^"]\+"\|''[^'']\+''\)')
       if quoted_string == ""
-        return indent + &sw * 2
+        return indent + shiftwidth() * 2
       endif
 
       if value == 'PUBLIC'
         let [quoted_string, end] = s:lex(line, end, '\%("[^"]\+"\|''[^'']\+''\)')
         if quoted_string == ""
-          return indent + &sw * 2
+          return indent + shiftwidth() * 2
         endif
       endif
 
       let [ndata, end] = s:lex(line, end)
       if ndata == ""
-        return indent + &sw
+        return indent + shiftwidth()
       endif
 
       let [name, end] = s:lex(line, end)
-      return name == "" ? (indent + &sw * 2) : indent
+      return name == "" ? (indent + shiftwidth() * 2) : indent
     else
       return indent
     endif
@@ -284,24 +284,24 @@ function GetDTDIndent()
     " Check for notation name.  If none exists, indent one level.
     let [name, end] = s:lex(line, end)
     if name == ""
-      return indent + &sw
+      return indent + shiftwidth()
     endif
 
     " Now check for the external ID.  If none exists, indent one level.
     let [id, end] = s:lex(line, end)
     if id == ""
-      return indent + &sw
+      return indent + shiftwidth()
     elseif id == 'SYSTEM' || id == 'PUBLIC'
       let [quoted_string, end] = s:lex(line, end, '\%("[^"]\+"\|''[^'']\+''\)')
       if quoted_string == ""
-        return indent + &sw * 2
+        return indent + shiftwidth() * 2
       endif
 
       if id == 'PUBLIC'
         let [quoted_string, end] = s:lex(line, end, '\%("[^"]\+"\|''[^'']\+''\|>\)')
         if quoted_string == ""
           " TODO: Should use s:lex here on getline(v:lnum) and check for >.
-          return getline(v:lnum) =~ '^\s*>' ? indent : (indent + &sw * 2)
+          return getline(v:lnum) =~ '^\s*>' ? indent : (indent + shiftwidth() * 2)
         elseif quoted_string == '>'
           return indent
         endif

runtime/indent/eiffel.vim

@@ -2,9 +2,10 @@
 " Language:	Eiffel
 " Maintainer:	Jocelyn Fiat <jfiat@eiffel.com>
 " Previous-Maintainer:	David Clarke <gadicath@dishevelled.net>
+" Contributions from: Takuya Fujiwara
 " Contributions from: Thilo Six
-" $Date: 2004/12/09 21:33:52 $
+" $Date: 2017/03/08 06:00:00 $
-" $Revision: 1.3 $
+" $Revision: 1.4 $
 " URL: https://github.com/eiffelhub/vim-eiffel
 
 " Only load this indent file when no other was loaded.
@@ -28,7 +29,7 @@ let b:undo_indent = "setl smartindent< indentkeys< indentexpr< autoindent< comme
 " Define some stuff
 " keywords grouped by indenting
 let s:trust_user_indent = '\(+\)\(\s*\(--\).*\)\=$'
-let s:relative_indent = '^\s*\(deferred\|class\|feature\|creation\|inherit\|loop\|from\|until\|if\|else\|elseif\|ensure\|require\|check\|do\|local\|invariant\|variant\|rename\|redefine\|do\|export\)\>'
+let s:relative_indent = '^\s*\(deferred\|class\|feature\|creation\|inherit\|loop\|from\|across\|until\|if\|else\|elseif\|ensure\|require\|check\|do\|local\|invariant\|variant\|rename\|redefine\|do\|export\)\>'
 let s:outdent = '^\s*\(else\|invariant\|variant\|do\|require\|until\|loop\|local\)\>'
 let s:no_indent = '^\s*\(class\|feature\|creation\|inherit\)\>'
 let s:single_dent = '^[^-]\+[[:alnum:]]\+ is\(\s*\(--\).*\)\=$'
@@ -63,23 +64,23 @@ function GetEiffelIndent()
   " Add a 'shiftwidth' after lines that start with an indent word
   let ind = indent(lnum)
   if getline(lnum) =~ s:relative_indent
-    let ind = ind + &sw
+    let ind = ind + shiftwidth()
   endif
 
   " Indent to single indent
   if getline(v:lnum) =~ s:single_dent && getline(v:lnum) !~ s:relative_indent
 	   \ && getline(v:lnum) !~ '\s*\<\(and\|or\|implies\)\>'
-     let ind = &sw
+     let ind = shiftwidth()
   endif
 
   " Indent to double indent
   if getline(v:lnum) =~ s:inheritance_dent
-     let ind = 2 * &sw
+     let ind = 2 * shiftwidth()
   endif
 
   " Indent line after the first line of the function definition
   if getline(lnum) =~ s:single_dent
-     let ind = ind + &sw
+     let ind = ind + shiftwidth()
   endif
 
   " The following should always be at the start of a line, no indenting
@@ -91,17 +92,17 @@ function GetEiffelIndent()
   " or first thing after the 'do'
   if getline(v:lnum) =~ s:outdent && getline(v:lnum - 1) !~ s:single_dent
 	\ && getline(v:lnum - 1) !~ '^\s*do\>'
-    let ind = ind - &sw
+    let ind = ind - shiftwidth()
   endif
 
   " Subtract a shiftwidth for end statements
   if getline(v:lnum) =~ '^\s*end\>'
-    let ind = ind - &sw
+    let ind = ind - shiftwidth()
   endif
 
   " set indent of zero end statements that are at an indent of 3, this should
   " only ever be the class's end.
-  if getline(v:lnum) =~ '^\s*end\>' && ind == &sw
+  if getline(v:lnum) =~ '^\s*end\>' && ind == shiftwidth()
     let ind = 0
   endif
 

runtime/indent/eterm.vim

@@ -25,11 +25,11 @@ function GetEtermIndent()
   let ind = indent(lnum)
 
   if getline(lnum) =~ '^\s*begin\>'
-    let ind = ind + &sw
+    let ind = ind + shiftwidth()
   endif
 
   if getline(v:lnum) =~ '^\s*end\>'
-    let ind = ind - &sw
+    let ind = ind - shiftwidth()
   endif
 
   return ind

runtime/indent/framescript.vim

@@ -30,11 +30,11 @@ function GetFrameScriptIndent()
   let ind = indent(lnum)
 
   if getline(lnum) =~? '^\s*\%(If\|Loop\|Sub\)'
-    let ind = ind + &sw
+    let ind = ind + shiftwidth()
   endif
 
   if getline(v:lnum) =~? '^\s*\%(Else\|End\%(If\|Loop\|Sub\)\)'
-    let ind = ind - &sw
+    let ind = ind - shiftwidth()
   endif
 
   return ind

runtime/indent/java.vim

@@ -1,12 +1,14 @@
 " Vim indent file
 " Language:	Java
 " Previous Maintainer: Toby Allsopp <toby.allsopp@peace.com>
-" Current Maintainer: Hong Xu <xuhdev@gmail.com>
+" Current Maintainer: Hong Xu <hong@topbug.net>
-" Last Change:	2012 May 18
+" Homepage: http://www.vim.org/scripts/script.php?script_id=3899
-" Version: 1.0
+"           https://github.com/xuhdev/indent-java.vim
+" Last Change:	2016 Mar 7
+" Version: 1.1
 " License: Same as Vim.
-" Copyright (c) 2012 Hong Xu
+" Copyright (c) 2012-2016 Hong Xu
-" Before 2012, this file is maintained by Toby Allsopp.
+" Before 2012, this file was maintained by Toby Allsopp.
 
 " Only load this indent file when no other was loaded.
 if exists("b:did_indent")
@@ -29,6 +31,7 @@ let b:undo_indent = "set cin< cino< indentkeys< indentexpr<"
 if exists("*GetJavaIndent")
   finish
 endif
+
 let s:keepcpo= &cpo
 set cpo&vim
 
@@ -70,7 +73,7 @@ function GetJavaIndent()
 
   " If the previous line starts with '@', we should have the same indent as
   " the previous one
-  if getline(lnum) =~ '^\s*@\S\+\s*$'
+  if getline(lnum) =~ '^\s*@.*$'
     return indent(lnum)
   endif
 
@@ -85,9 +88,9 @@ function GetJavaIndent()
 
   " Try to align "throws" lines for methods and "extends" and "implements" for
   " classes.
-  if getline(v:lnum) =~ '^\s*\(extends\|implements\)\>'
+  if getline(v:lnum) =~ '^\s*\(throws\|extends\|implements\)\>'
-        \ && getline(lnum) !~ '^\s*\(extends\|implements\)\>'
+        \ && getline(lnum) !~ '^\s*\(throws\|extends\|implements\)\>'
-    let theIndent = theIndent + &sw
+    let theIndent = theIndent + shiftwidth()
   endif
 
   " correct for continuation lines of "throws", "implements" and "extends"
@@ -96,27 +99,27 @@ function GetJavaIndent()
   if strlen(cont_kw) > 0
     let amount = strlen(cont_kw) + 1
     if getline(lnum) !~ ',\s*$'
-      let theIndent = theIndent - (amount + &sw)
+      let theIndent = theIndent - (amount + shiftwidth())
       if theIndent < 0
         let theIndent = 0
       endif
     elseif prev == lnum
       let theIndent = theIndent + amount
       if cont_kw ==# 'throws'
-        let theIndent = theIndent + &sw
+        let theIndent = theIndent + shiftwidth()
       endif
     endif
   elseif getline(prev) =~ '^\s*\(throws\|implements\|extends\)\>'
         \ && (getline(prev) =~ '{\s*$'
         \  || getline(v:lnum) =~ '^\s*{\s*$')
-    let theIndent = theIndent - &sw
+    let theIndent = theIndent - shiftwidth()
   endif
 
   " When the line starts with a }, try aligning it with the matching {,
   " skipping over "throws", "extends" and "implements" clauses.
   if getline(v:lnum) =~ '^\s*}\s*\(//.*\|/\*.*\)\=$'
     call cursor(v:lnum, 1)
-    silent normal %
+    silent normal! %
     let lnum = line('.')
     if lnum < v:lnum
       while lnum > 1

runtime/indent/ld.vim

@@ -65,7 +65,7 @@ function GetLDIndent()
   if line =~ '^\s*\*'
     return cindent(v:lnum)
   elseif line =~ '^\s*}'
-    return indent(v:lnum) - &sw
+    return indent(v:lnum) - shiftwidth()
   endif
 
   let pnum = s:prevnonblanknoncomment(v:lnum - 1)
@@ -73,11 +73,11 @@ function GetLDIndent()
     return 0
   endif
 
-  let ind = indent(pnum) + s:count_braces(pnum, 1) * &sw
+  let ind = indent(pnum) + s:count_braces(pnum, 1) * shiftwidth()
 
   let pline = getline(pnum)
   if pline =~ '}\s*$'
-    let ind -= (s:count_braces(pnum, 0) - (pline =~ '^\s*}' ? 1 : 0)) * &sw
+    let ind -= (s:count_braces(pnum, 0) - (pline =~ '^\s*}' ? 1 : 0)) * shiftwidth()
   endif
 
   return ind

runtime/indent/make.vim

@@ -48,14 +48,14 @@ function GetMakeIndent()
     if prev_prev_line =~ s:continuation_rx
       return indent(prev_lnum)
     elseif prev_line =~ s:rule_rx
-      return &sw
+      return shiftwidth()
     elseif prev_line =~ s:assignment_rx
       call cursor(prev_lnum, 1)
       if search(s:assignment_rx, 'W') != 0
         return virtcol('.') - 1
       else
         " TODO: ?
-        return &sw
+        return shiftwidth()
       endif
     else
       " TODO: OK, this might be a continued shell command, so perhaps indent
@@ -66,7 +66,7 @@ function GetMakeIndent()
       "    return indent(prev_lnum) + 2
       "  endif
       "endif
-      return indent(prev_lnum) + &sw
+      return indent(prev_lnum) + shiftwidth()
     endif
   elseif prev_prev_line =~ s:continuation_rx
     let folded_line = s:remove_continuation(prev_prev_line) . ' ' . s:remove_continuation(prev_line)
@@ -102,13 +102,13 @@ function GetMakeIndent()
       return &ts
     endif
   elseif prev_line =~ s:conditional_directive_rx
-    return &sw
+    return shiftwidth()
   else
     let line = getline(v:lnum)
     if line =~ s:just_inserted_rule_rx
       return 0
     elseif line =~ s:end_conditional_directive_rx
-      return v:lnum - 1 == 0 ? 0 : indent(v:lnum - 1) - &sw
+      return v:lnum - 1 == 0 ? 0 : indent(v:lnum - 1) - shiftwidth()
     else
       return v:lnum - 1 == 0 ? 0 : indent(v:lnum - 1)
     endif

runtime/indent/readline.vim

@@ -25,11 +25,11 @@ function GetReadlineIndent()
   let ind = indent(lnum)
 
   if getline(lnum) =~ '^\s*$\(if\|else\)\>'
-    let ind = ind + &sw
+    let ind = ind + shiftwidth()
   endif
 
   if getline(v:lnum) =~ '^\s*$\(else\|endif\)\>'
-    let ind = ind - &sw
+    let ind = ind - shiftwidth()
   endif
 
   return ind

runtime/indent/sas.vim

@@ -0,0 +1,138 @@
+" Vim indent file
+" Language:     SAS
+" Maintainer:   Zhen-Huan Hu <wildkeny@gmail.com>
+" Version:      3.0.1
+" Last Change:  Mar 13, 2017
+
+if exists("b:did_indent")
+  finish
+endif
+let b:did_indent = 1
+
+setlocal indentexpr=GetSASIndent()
+setlocal indentkeys+=;,=~data,=~proc,=~macro
+
+if exists("*GetSASIndent")
+  finish
+endif
+
+let s:cpo_save = &cpo
+set cpo&vim
+
+" Regex that captures the start of a data/proc section
+let s:section_str = '\v%(^|;)\s*%(data|proc)>'
+" Regex that captures the end of a run-processing section
+let s:section_run = '\v%(^|;)\s*run\s*;'
+" Regex that captures the end of a data/proc section
+let s:section_end = '\v%(^|;)\s*%(quit|enddata)\s*;'
+
+" Regex that captures the start of a control block (anything inside a section)
+let s:block_str = '\v<%(do>%([^;]+<%(to|over)>[^;]+)=|%(define|layout|method|select)>[^;]+|begingraph)\s*;'
+" Regex that captures the end of a control block (anything inside a section)
+let s:block_end = '\v<%(end|endlayout|endgraph)\s*;'
+
+" Regex that captures the start of a macro
+let s:macro_str = '\v%(^|;)\s*\%macro>'
+" Regex that captures the end of a macro
+let s:macro_end = '\v%(^|;)\s*\%mend\s*;'
+
+" Regex that defines the end of the program
+let s:program_end = '\v%(^|;)\s*endsas\s*;'
+
+" List of procs supporting run-processing
+let s:run_processing_procs = [
+      \ 'catalog', 'chart', 'datasets', 'document', 'ds2', 'plot', 'sql',
+      \ 'gareabar', 'gbarline', 'gchart', 'gkpi', 'gmap', 'gplot', 'gradar', 'greplay', 'gslide', 'gtile',
+      \ 'anova', 'arima', 'catmod', 'factex', 'glm', 'model', 'optex', 'plan', 'reg',
+      \ 'iml',
+      \ ]
+
+" Find the line number of previous keyword defined by the regex
+function! s:PrevMatch(lnum, regex)
+  let prev_lnum = prevnonblank(a:lnum - 1)
+  while prev_lnum > 0
+    let prev_line = getline(prev_lnum)
+    if prev_line =~ a:regex
+      break
+    else
+      let prev_lnum = prevnonblank(prev_lnum - 1)
+    endif
+  endwhile
+  return prev_lnum
+endfunction
+
+" Main function
+function! GetSASIndent()
+  let prev_lnum = prevnonblank(v:lnum - 1)
+  if prev_lnum ==# 0
+    " Leave the indentation of the first line unchanged
+    return indent(1)
+  else
+    let prev_line = getline(prev_lnum)
+    " Previous non-blank line contains the start of a macro/section/block
+    " while not the end of a macro/section/block (at the same line)
+    if (prev_line =~ s:section_str && prev_line !~ s:section_run && prev_line !~ s:section_end) ||
+          \ (prev_line =~ s:block_str && prev_line !~ s:block_end) ||
+          \ (prev_line =~ s:macro_str && prev_line !~ s:macro_end)
+      let ind = indent(prev_lnum) + &sts
+    elseif prev_line =~ s:section_run && prev_line !~ s:section_end
+      let prev_section_str_lnum = s:PrevMatch(v:lnum, s:section_str)
+      let prev_section_end_lnum = max([
+            \ s:PrevMatch(v:lnum, s:section_end),
+            \ s:PrevMatch(v:lnum, s:macro_end  ),
+            \ s:PrevMatch(v:lnum, s:program_end)])
+      " Check if the section supports run-processing
+      if prev_section_end_lnum < prev_section_str_lnum &&
+            \ getline(prev_section_str_lnum) =~ '\v%(^|;)\s*proc\s+%(' .
+            \ join(s:run_processing_procs, '|') . ')>'
+        let ind = indent(prev_lnum) + &sts
+      else
+        let ind = indent(prev_lnum)
+      endif
+    else
+      let ind = indent(prev_lnum)
+    endif
+  endif
+  " Re-adjustments based on the inputs of the current line
+  let curr_line = getline(v:lnum)
+  if curr_line =~ s:program_end
+    " End of the program
+    " Same indentation as the first non-blank line
+    return indent(nextnonblank(1))
+  elseif curr_line =~ s:macro_end
+    " Current line is the end of a macro
+    " Match the indentation of the start of the macro
+    return indent(s:PrevMatch(v:lnum, s:macro_str))
+  elseif curr_line =~ s:block_end && curr_line !~ s:block_str
+    " Re-adjust if current line is the end of a block
+    " while not the beginning of a block (at the same line)
+    " Returning the indent of previous block start directly
+    " would not work due to nesting
+    let ind = ind - &sts
+  elseif curr_line =~ s:section_str || curr_line =~ s:section_run || curr_line =~ s:section_end
+    " Re-adjust if current line is the start/end of a section
+    " since the end of a section could be inexplicit
+    let prev_section_str_lnum = s:PrevMatch(v:lnum, s:section_str)
+    " Check if the previous section supports run-processing
+    if getline(prev_section_str_lnum) =~ '\v%(^|;)\s*proc\s+%(' .
+          \ join(s:run_processing_procs, '|') . ')>'
+      let prev_section_end_lnum = max([
+            \ s:PrevMatch(v:lnum, s:section_end),
+            \ s:PrevMatch(v:lnum, s:macro_end  ),
+            \ s:PrevMatch(v:lnum, s:program_end)])
+    else
+      let prev_section_end_lnum = max([
+            \ s:PrevMatch(v:lnum, s:section_end),
+            \ s:PrevMatch(v:lnum, s:section_run),
+            \ s:PrevMatch(v:lnum, s:macro_end  ),
+            \ s:PrevMatch(v:lnum, s:program_end)])
+    endif
+    if prev_section_end_lnum < prev_section_str_lnum
+      let ind = ind - &sts
+    endif
+  endif
+  return ind
+endfunction
+
+let &cpo = s:cpo_save
+unlet s:cpo_save

runtime/indent/scala.vim

@@ -412,24 +412,24 @@ function! GetScalaIndent()
     if prevline =~ '^\s*\.'
       return ind
     else
-      return ind + &shiftwidth
+      return ind + shiftwidth()
     endif
   endif
 
   " Indent html literals
   if prevline !~ '/>\s*$' && prevline =~ '^\s*<[a-zA-Z][^>]*>\s*$'
     call scala#ConditionalConfirm("3")
-    return ind + &shiftwidth
+    return ind + shiftwidth()
   endif
 
   " assumes curly braces around try-block
   if curline =~ '^\s*}\s*\<catch\>'
-    return ind - &shiftwidth
+    return ind - shiftwidth()
   elseif curline =~ '^\s*\<catch\>'
     return ind
   endif
 
-  " Add a 'shiftwidth' after lines that start a block
+  " Add a shiftwidth()' after lines that start a block
   " If 'if', 'for' or 'while' end with ), this is a one-line block
   " If 'val', 'var', 'def' end with =, this is a one-line block
   if (prevline =~ '^\s*\<\%(\%(}\?\s*else\s\+\)\?if\|for\|while\)\>.*[)=]\s*$' && scala#NumberOfBraceGroups(prevline) <= 1)
@@ -438,7 +438,7 @@ function! GetScalaIndent()
         \ || prevline =~ '^\s*\%(}\s*\)\?\<else\>\s*$'
         \ || prevline =~ '=\s*$'
     call scala#ConditionalConfirm("4")
-    let ind = ind + &shiftwidth
+    let ind = ind + shiftwidth()
   elseif prevline =~ '^\s*\<\%(}\?\s*else\s\+\)\?if\>' && curline =~ '^\s*}\?\s*\<else\>'
     return ind
   endif
@@ -447,7 +447,7 @@ function! GetScalaIndent()
   let bracketCount = scala#CountBrackets(prevline, '{', '}')
   if bracketCount > 0 || prevline =~ '.*{\s*$'
     call scala#ConditionalConfirm("5b")
-    let ind = ind + &shiftwidth
+    let ind = ind + shiftwidth()
   elseif bracketCount < 0
     call scala#ConditionalConfirm("6b")
     " if the closing brace actually completes the braces entirely, then we
@@ -475,7 +475,7 @@ function! GetScalaIndent()
     let bracketCount = scala#CountBrackets(prevline, '(', ')')
     if bracketCount > 0 || prevline =~ '.*(\s*$'
       call scala#ConditionalConfirm("5a")
-      let ind = ind + &shiftwidth
+      let ind = ind + shiftwidth()
     elseif bracketCount < 0
       call scala#ConditionalConfirm("6a")
       " if the closing brace actually completes the braces entirely, then we
@@ -497,7 +497,7 @@ function! GetScalaIndent()
       else
         " This is the only part that's different from from the '{', '}' one below
         " Yup... some refactoring is necessary at some point.
-        let ind = ind + (bracketCount * &shiftwidth)
+        let ind = ind + (bracketCount * shiftwidth())
         let lineCompletedBrackets = 1
       endif
     endif
@@ -506,10 +506,10 @@ function! GetScalaIndent()
   if curline =~ '^\s*}\?\s*\<else\>\%(\s\+\<if\>\s*(.*)\)\?\s*{\?\s*$' &&
    \ ! scala#LineIsCompleteIf(prevline) &&
    \ prevline !~ '^.*}\s*$'
-    let ind = ind - &shiftwidth
+    let ind = ind - shiftwidth()
   endif
 
-  " Subtract a 'shiftwidth' on '}' or html
+  " Subtract a shiftwidth()' on '}' or html
   let curCurlyCount = scala#CountCurlies(curline)
   if curCurlyCount < 0
     call scala#ConditionalConfirm("14a")
@@ -517,7 +517,7 @@ function! GetScalaIndent()
     return indent(matchline)
   elseif curline =~ '^\s*</[a-zA-Z][^>]*>'
     call scala#ConditionalConfirm("14c")
-    return ind - &shiftwidth
+    return ind - shiftwidth()
   endif
 
   let prevParenCount = scala#CountParens(prevline)
@@ -529,7 +529,7 @@ function! GetScalaIndent()
   let prevCurlyCount = scala#CountCurlies(prevline)
   if prevCurlyCount == 0 && prevline =~ '^.*\%(=>\|⇒\)\s*$' && prevline !~ '^\s*this\s*:.*\%(=>\|⇒\)\s*$' && curline !~ '^\s*\<case\>'
     call scala#ConditionalConfirm("16")
-    let ind = ind + &shiftwidth
+    let ind = ind + shiftwidth()
   endif
 
   if ind == originalIndentValue && curline =~ '^\s*\<case\>'
@@ -555,7 +555,7 @@ function! GetScalaIndent()
   if scala#LineIsAClosingXML(prevline)
     if scala#LineCompletesXML(prevlnum, prevline)
       call scala#ConditionalConfirm("20a")
-      return ind - &shiftwidth
+      return ind - shiftwidth()
     else
       call scala#ConditionalConfirm("20b")
       return ind
@@ -566,7 +566,7 @@ function! GetScalaIndent()
     "let indentMultiplier = scala#LineCompletesDefValr(prevlnum, prevline)
     "if indentMultiplier != 0
     "  call scala#ConditionalConfirm("19a")
-    "  let ind = ind - (indentMultiplier * &shiftwidth)
+    "  let ind = ind - (indentMultiplier * shiftwidth())
     let defValrLine = scala#Test(prevlnum, prevline, '{', '}')
     if defValrLine != -1
       call scala#ConditionalConfirm("21a")
@@ -575,10 +575,10 @@ function! GetScalaIndent()
       call scala#ConditionalConfirm("21b")
       if scala#GetLine(prevnonblank(prevlnum - 1)) =~ '^.*\<else\>\s*\%(//.*\)\?$'
         call scala#ConditionalConfirm("21c")
-        let ind = ind - &shiftwidth
+        let ind = ind - shiftwidth()
       elseif scala#LineCompletesIfElse(prevlnum, prevline)
         call scala#ConditionalConfirm("21d")
-        let ind = ind - &shiftwidth
+        let ind = ind - shiftwidth()
       elseif scala#CountParens(curline) < 0 && curline =~ '^\s*)' && scala#GetLine(scala#GetLineThatMatchesBracket('(', ')')) =~ '.*(\s*$'
         " Handles situations that look like this:
         "
@@ -592,7 +592,7 @@ function! GetScalaIndent()
         "     10
         "   ).somethingHere()
         call scala#ConditionalConfirm("21e")
-        let ind = ind - &shiftwidth
+        let ind = ind - shiftwidth()
       endif
     endif
   endif

runtime/indent/tcl.vim

@@ -56,7 +56,7 @@ function GetTclIndent()
   if line =~ '^\s*\*'
     return cindent(v:lnum)
   elseif line =~ '^\s*}'
-    return indent(v:lnum) - &sw
+    return indent(v:lnum) - shiftwidth()
   endif
 
   let pnum = s:prevnonblanknoncomment(v:lnum - 1)
@@ -64,11 +64,11 @@ function GetTclIndent()
     return 0
   endif
 
-  let ind = indent(pnum) + s:count_braces(pnum, 1) * &sw
+  let ind = indent(pnum) + s:count_braces(pnum, 1) * shiftwidth()
 
   let pline = getline(pnum)
   if pline =~ '}\s*$'
-    let ind -= (s:count_braces(pnum, 0) - (pline =~ '^\s*}' ? 1 : 0)) * &sw
+    let ind -= (s:count_braces(pnum, 0) - (pline =~ '^\s*}' ? 1 : 0)) * shiftwidth()
   endif
 
   return ind

runtime/indent/tcsh.vim

@@ -32,17 +32,17 @@ function TcshGetIndent()
     let ind = indent(lnum)
     let line = getline(lnum)
     if line =~ '\v^\s*%(while|foreach)>|^\s*%(case\s.*:|default:|else)\s*$|%(<then|\\)$'
-	let ind = ind + &sw
+	let ind = ind + shiftwidth()
     endif
 
     if line =~ '\v^\s*breaksw>'
-	let ind = ind - &sw
+	let ind = ind - shiftwidth()
     endif
 
     " Subtract indent if current line has on end, endif, case commands
     let line = getline(v:lnum)
     if line =~ '\v^\s*%(else|end|endif)\s*$'
-	let ind = ind - &sw
+	let ind = ind - shiftwidth()
     endif
 
     return ind

runtime/indent/treetop.vim

@@ -26,12 +26,12 @@ function GetTreetopIndent()
   let line = getline(pnum)
 
   if line =~ '^\s*\%(grammar\|module\|rule\)\>'
-    let ind += &sw
+    let ind += shiftwidth()
   endif
 
   let line = getline(v:lnum)
   if line =~ '^\s*end\>'
-    let ind -= &sw
+    let ind -= shiftwidth()
   end
 
   retur ind

runtime/indent/xf86conf.vim

@@ -26,11 +26,11 @@ function GetXF86ConfIndent()
   let ind = indent(lnum)
 
   if getline(lnum) =~? '^\s*\(Sub\)\=Section\>'
-    let ind = ind + &sw
+    let ind = ind + shiftwidth()
   endif
 
   if getline(v:lnum) =~? '^\s*End\(Sub\)\=Section\>'
-    let ind = ind - &sw
+    let ind = ind - shiftwidth()
   endif
 
   return ind

runtime/indent/xinetd.vim

@@ -47,8 +47,8 @@ function GetXinetdIndent()
     return 0
   endif
 
-  return indent(pnum) + s:count_braces(pnum, 1) * &sw
+  return indent(pnum) + s:count_braces(pnum, 1) * shiftwidth()
-        \ - s:count_braces(v:lnum, 0) * &sw
+        \ - s:count_braces(v:lnum, 0) * shiftwidth()
 endfunction
 
 let &cpo = s:keepcpo

runtime/syntax/erlang.vim

@@ -1,9 +1,10 @@
 " Vim syntax file
 " Language:     Erlang (http://www.erlang.org)
 " Maintainer:   Csaba Hoch <csaba.hoch@gmail.com>
-" Last Update:  2013-Jul-25
+" Contributor:  Adam Rutkowski <hq@mtod.org>
+" Last Update:  2017-Mar-05
 " License:      Vim license
-" URL:          https://github.com/hcs42/vim-erlang
+" URL:          https://github.com/vim-erlang/vim-erlang-runtime
 
 " Acknowledgements: This script was originally created by Kresimir Marzic [1].
 " The script was then revamped by Csaba Hoch [2]. During the revamp, the new
@@ -46,7 +47,6 @@ syn match erlangComment           '%.*$' contains=erlangCommentAnnotation,erlang
 syn match erlangCommentAnnotation ' \@<=@\%(clear\|docfile\|end\|headerfile\|todo\|TODO\|type\|author\|copyright\|doc\|reference\|see\|since\|title\|version\|deprecated\|hidden\|private\|equiv\|spec\|throws\)' contained
 syn match erlangCommentAnnotation /`[^']*'/ contained
 syn keyword erlangTodo            TODO FIXME XXX contained
-syn match erlangShebang           '^#!.*'
 
 " Numbers (minimum base is 2, maximum is 36.)
 syn match erlangNumberInteger '\<\d\+\>'
@@ -56,12 +56,12 @@ syn match erlangNumberFloat   '\<\d\+\.\d\+\%([eE][+-]\=\d\+\)\=\>'
 " Strings, atoms, characters
 syn region erlangString            start=/"/ end=/"/ contains=erlangStringModifier
 syn region erlangQuotedAtom        start=/'/ end=/'/ contains=erlangQuotedAtomModifier
-syn match erlangStringModifier     '\~\a\|\\\%(\o\{1,3}\|x\x\x\|x{\x\+}\|\^.\|.\)' contained
+syn match erlangStringModifier     '\\\%(\o\{1,3}\|x\x\x\|x{\x\+}\|\^.\|.\)\|\~\%([ni~]\|\%(-\=\d\+\|\*\)\=\.\=\%(\*\|\d\+\)\=\%(\..\)\=[tl]*[cfegswpWPBX#bx+]\)' contained
-syn match erlangQuotedAtomModifier '\~\a\|\\\%(\o\{1,3}\|x\x\x\|x{\x\+}\|\^.\|.\)' contained
+syn match erlangQuotedAtomModifier '\\\%(\o\{1,3}\|x\x\x\|x{\x\+}\|\^.\|.\)' contained
 syn match erlangModifier           '\$\%([^\\]\|\\\%(\o\{1,3}\|x\x\x\|x{\x\+}\|\^.\|.\)\)'
 
 " Operators, separators
-syn match erlangOperator   '==\|=:=\|/=\|=/=\|<\|=<\|>\|>=\|++\|--\|=\|!\|<-\|+\|-\|\*\|\/'
+syn match erlangOperator   '==\|=:=\|/=\|=/=\|<\|=<\|>\|>=\|=>\|:=\|++\|--\|=\|!\|<-\|+\|-\|\*\|\/'
 syn keyword erlangOperator div rem or xor bor bxor bsl bsr and band not bnot andalso orelse
 syn match erlangBracket    '{\|}\|\[\|]\||\|||'
 syn match erlangPipe       '|'
@@ -72,14 +72,19 @@ syn match erlangAtom           '\<\l[[:alnum:]_@]*' contains=erlangBoolean
 syn keyword erlangBoolean      true false contained
 syn match erlangLocalFuncCall  '\<\a[[:alnum:]_@]*\>\%(\%(\s\|\n\|%.*\n\)*(\)\@=' contains=erlangBIF
 syn match erlangLocalFuncRef   '\<\a[[:alnum:]_@]*\>\%(\%(\s\|\n\|%.*\n\)*/\)\@='
-syn match erlangGlobalFuncCall '\<\%(\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*\.\%(\s\|\n\|%.*\n\)*\)*\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*:\%(\s\|\n\|%.*\n\)*\a[[:alnum:]_@]*\>\%(\%(\s\|\n\|%.*\n\)*(\)\@=' contains=erlangComment
+syn match erlangGlobalFuncCall '\<\%(\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*\.\%(\s\|\n\|%.*\n\)*\)*\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*:\%(\s\|\n\|%.*\n\)*\a[[:alnum:]_@]*\>\%(\%(\s\|\n\|%.*\n\)*(\)\@=' contains=erlangComment,erlangVariable
-syn match erlangGlobalFuncRef  '\<\%(\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*\.\%(\s\|\n\|%.*\n\)*\)*\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*:\%(\s\|\n\|%.*\n\)*\a[[:alnum:]_@]*\>\%(\%(\s\|\n\|%.*\n\)*/\)\@=' contains=erlangComment
+syn match erlangGlobalFuncRef  '\<\%(\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*\.\%(\s\|\n\|%.*\n\)*\)*\a[[:alnum:]_@]*\%(\s\|\n\|%.*\n\)*:\%(\s\|\n\|%.*\n\)*\a[[:alnum:]_@]*\>\%(\%(\s\|\n\|%.*\n\)*/\)\@=' contains=erlangComment,erlangVariable
 
-" Variables, macros, records
+" Variables, macros, records, maps
 syn match erlangVariable '\<[A-Z_][[:alnum:]_@]*'
 syn match erlangMacro    '??\=[[:alnum:]_@]\+'
 syn match erlangMacro    '\%(-define(\)\@<=[[:alnum:]_@]\+'
+syn match erlangMap      '#'
 syn match erlangRecord   '#\s*\l[[:alnum:]_@]*'
+syn region erlangQuotedRecord        start=/#\s*'/ end=/'/ contains=erlangQuotedAtomModifier
+
+" Shebang (this line has to be after the ErlangMap)
+syn match erlangShebang  '^#!.*'
 
 " Bitstrings
 syn match erlangBitType '\%(\/\%(\s\|\n\|%.*\n\)*\)\@<=\%(integer\|float\|binary\|bytes\|bitstring\|bits\|binary\|utf8\|utf16\|utf32\|signed\|unsigned\|big\|little\|native\|unit\)\%(\%(\s\|\n\|%.*\n\)*-\%(\s\|\n\|%.*\n\)*\%(integer\|float\|binary\|bytes\|bitstring\|bits\|binary\|utf8\|utf16\|utf32\|signed\|unsigned\|big\|little\|native\|unit\)\)*' contains=erlangComment
@@ -94,7 +99,7 @@ syn match erlangPreCondit '^\s*-\%(\s\|\n\|%.*\n\)*\%(ifdef\|ifndef\|else\|endif
 syn match erlangType      '^\s*-\%(\s\|\n\|%.*\n\)*\%(spec\|type\|opaque\|callback\)\>' contains=erlangComment
 
 " Keywords
-syn keyword erlangKeyword after begin case catch cond end fun if let of query
+syn keyword erlangKeyword after begin case catch cond end fun if let of
 syn keyword erlangKeyword receive when try
 
 " Build-in-functions (BIFs)
@@ -142,7 +147,6 @@ let b:erlang_syntax_synced = 1
 let s:old_style = (exists("g:erlang_old_style_highlight") &&
                   \g:erlang_old_style_highlight == 1)
 
-" Only when an item doesn't have highlighting yet
 
 " Comments
 hi def link erlangComment Comment
@@ -188,6 +192,8 @@ hi def link erlangGlobalFuncRef Function
 hi def link erlangVariable Normal
 hi def link erlangMacro Normal
 hi def link erlangRecord Normal
+hi def link erlangQuotedRecord Normal
+hi def link erlangMap Normal
 else
 hi def link erlangAtom String
 hi def link erlangLocalFuncCall Normal
@@ -197,6 +203,8 @@ hi def link erlangGlobalFuncRef Normal
 hi def link erlangVariable Identifier
 hi def link erlangMacro Macro
 hi def link erlangRecord Structure
+hi def link erlangQuotedRecord Structure
+hi def link erlangMap Structure
 endif
 
 " Bitstrings

runtime/syntax/scala.vim

@@ -71,6 +71,8 @@ hi link scalaUnicodeChar Special
 
 syn match scalaOperator "||"
 syn match scalaOperator "&&"
+syn match scalaOperator "|"
+syn match scalaOperator "&"
 hi link scalaOperator Special
 
 syn match scalaNameDefinition /\<[_A-Za-z0-9$]\+\>/ contained nextgroup=scalaPostNameDefinition,scalaVariableDeclarationList
@@ -142,7 +144,7 @@ hi link scalaString String
 hi link scalaStringEmbeddedQuote String
 
 syn region scalaIString matchgroup=scalaInterpolationBrackets start=/\<[a-zA-Z][a-zA-Z0-9_]*"/ skip=/\\"/ end=/"/ contains=scalaInterpolation,scalaInterpolationB,scalaEscapedChar,scalaUnicodeChar
-syn region scalaTripleIString matchgroup=scalaInterpolationBrackets start=/\<[a-zA-Z][a-zA-Z0-9_]*"""/ end=/"""\%([^"]\|$\)/ contains=scalaInterpolation,scalaInterpolationB,scalaEscapedChar,scalaUnicodeChar
+syn region scalaTripleIString matchgroup=scalaInterpolationBrackets start=/\<[a-zA-Z][a-zA-Z0-9_]*"""/ end=/"""\ze\%([^"]\|$\)/ contains=scalaInterpolation,scalaInterpolationB,scalaEscapedChar,scalaUnicodeChar
 hi link scalaIString String
 hi link scalaTripleIString String
 

runtime/syntax/tmux.vim

@@ -4,18 +4,16 @@
 " Maintainer: Eric Pruitt <eric.pruitt@gmail.com>
 " License: 2-Clause BSD (http://opensource.org/licenses/BSD-2-Clause)
 
-if version < 600
+if exists("b:current_syntax")
-    syntax clear
-elseif exists("b:current_syntax")
     finish
-else
-    let b:current_syntax = "tmux"
 endif
 
-" this file uses line continuations
+" Explicitly change compatiblity options to Vim's defaults because this file
-let s:cpo_sav = &cpo
+" uses line continuations.
+let s:original_cpo = &cpo
 set cpo&vim
 
+let b:current_syntax = "tmux"
 setlocal iskeyword+=-
 syntax case match
 
@@ -62,7 +60,6 @@ for s:i in range(0, 255)
     exec "syn match tmuxColour" . s:i . " /\\<colour" . s:i . "\\>/ display"
 \     " | highlight tmuxColour" . s:i . " ctermfg=" . s:i . " ctermbg=" . s:bg
 endfor
-unlet s:bg s:i
 
 syn keyword tmuxOptions
 \ buffer-limit command-alias default-terminal escape-time exit-unattached
@@ -123,5 +120,5 @@ syn keyword tmuxCommands
 \ swapp swap-window swapw switch-client switchc unbind-key unbind wait-for
 \ wait
 
-let &cpo = s:cpo_sav
+let &cpo = s:original_cpo
-unlet! s:cpo_sav
+unlet! s:original_cpo s:bg s:i