Problem: the previous documentation falsely states that "v" always
refers to the start of a visual area. In fact, the reference of "v" and
"." complement each other. If the cursor is at the start of
a (characterwise) visual area, then "v" refers to the end of the area.
Solution: be more verbose and explicit about the connection between "."
and "v" and also refer to |v_o| which many vim users will be familiar
with for visual areas.
210b39c2d6
Co-authored-by: Peter Aronoff <peter@aronoff.org>
Problem: Can't use a blockwise selection with a width for getregion().
Solution: Add support for blockwise selection with width like the return
value of getregtype() or the "regtype" value of TextYankPost
(zeertzjq).
closes: vim/vim#14842afc2295c22
Problem: getregionpos() can't properly indicate positions beyond eol.
Solution: Add an "eol" flag that enables handling positions beyond end
of line like getpos() does (zeertzjq).
Also fix the problem that a position still has the coladd beyond the end
of the line when its column has been clamped. In the last test case
with TABs at the end of the line the old behavior is obviously wrong.
I decided to gate this behind a flag because returning positions that
don't correspond to actual characters in the line may lead to mistakes
for callers that want to calculate the length of the selected text, so
the behavior is only enabled if the caller wants it.
closes: vim/vim#148382b09de9104
Problem: getregionpos() doesn't handle one char selection.
Solution: Handle startspaces differently when is_oneChar is set.
Also add a test for an exclusive charwise selection with
multibyte chars (zeertzjq)
closes: vim/vim#1482552a6f34887
Problem: getregionpos() wrong with blockwise mode and multibyte.
Solution: Use textcol and textlen instead of start_vcol and end_vcol.
Handle coladd properly (zeertzjq).
Also remove unnecessary buflist_findnr() in add_regionpos_range(), as
getregionpos() has already switched buffer.
closes: vim/vim#14805c95e64f41f
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: vim/vim#14609closes: vim/vim#14617b4757e627e
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
runtime(doc): Normalise builtin-function optional parameter formatting
These should generally be formatted as func([{arg}]) and referenced as
{arg} in the description.
closes: vim/vim#144389cd9e759ab
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: vim/vim#14275ad38769030
Problem: no overflow check for string formatting
Solution: Check message formatting function for overflow.
(Chris van Willegen)
closes: vim/vim#13799c35fc03dbd
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: vim/vim#14191
Nvim: don't reuse "wp" for "topleft" in winframe_remove, so the change
integrates better with the call to winframe_find_altwin before it.
5866bc3a0f
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in vim/vim#14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: vim/vim#14047closes: vim/vim#14186d64801e913
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
96cc4aef3d
Partial as WinNewPre has not been ported yet (it currently has problems anyway).
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: vim/vim#141540df8f93bda
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: vim/vim#1413184bf6e658d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
runtime(doc): some improvements to getregion() docs (vim/vim#14122)
- Mention the default selection behavior
- Remove useless sentence
- Correct description about space padding
87410ab3f5
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: vim/vim#1409019b718828d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
runtime(doc) Update help text for matchbufline() and matchstrlist()
closes: vim/vim#14080a35235e824
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: vim/vim#14076
Internal error when passing mark in another buffer to getregion()
421b597470
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: vim/vim#13998closes: vim/vim#115793f905ab3c4
Cherry-pick changes from patch 9.1.0122, with :echom instead of :echow.
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Jakub Łuczyński <doubleloop@o2.pl>
Problem: E95 is possible if a buffer called "[Command Line]" already
exists when opening the cmdwin. This can also happen if the
cmdwin's buffer could not be deleted when closing.
Solution: Un-name the cmdwin buffer, and give it a special name instead,
similar to what's done for quickfix buffers and for unnamed
prompt and scratch buffers. As a result, BufFilePre/Post are
no longer fired when opening the cmdwin. Add a "command" key
to the dictionary returned by getbufinfo() to differentiate
the cmdwin buffer instead. (Sean Dewar)
Cherry-pick test_normal changes from v9.0.0954.
1fb4103206
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: vim/vim#1269892e90a1e10
Co-authored-by: Casey Tucker <dctucker@hotmail.com>
Problem: Vim is missing a foreach() func
Solution: Implement foreach({expr1}, {expr2}) function,
which applies {expr2} for each item in {expr1}
without changing it (Ernie Rael)
closes: vim/vim#12166e79e207760
Partial port as this doesn't handle non-materialized range() lists.
vim-patch:c92b8bed1fa6
runtime(help): delete duplicate help tag E741 (vim/vim#13861)
c92b8bed1f
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Cannot easily get the list of matches
Solution: Add the matchstrlist() and matchbufline() Vim script
functions (Yegappan Lakshmanan)
closes: vim/vim#13766
Omit CHECK_LIST_MATERIALIZE(): it populates a List with numbers only,
and there is a check for strings below.
f93b1c881a
vim-patch:eb3475df0d92
runtime(doc): Replace non-breaking space with normal space (vim/vim#13868)
eb3475df0d
Co-authored-by: Yegappan Lakshmanan <4298407+yegappan@users.noreply.github.com>
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: vim/vim#1369281642d9d6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: vim/vim#13588fcaeb3d42b
runtime(doc): Fix whitespace and formatting of some help files (vim/vim#13549)
596a9f29c8
N/A patch:
vim-patch:aabca259fa48
Co-authored-by: h_east <h.east.727@gmail.com>
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem: strange error number
Solution: change error number,
add doc tag for E1507
closes: vim/vim#13270ea746f9e86
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
Problem: Vim9: error codes spread out
Solution: group them together and reserve 100
more for future use
Reserve 100 error codes for future enhancements to the Vim9 class
support
closes: vim/vim#13207413f83990f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
runtime(doc): Add a missing '<' to the help of strutf16len() (vim/vim#13168)
790f9a890c
Co-authored-by: a5ob7r <12132068+a5ob7r@users.noreply.github.com>
Problem: SafeStateAgain not triggered if callback uses feedkeys().
Solution: Check for safe state in the input loop. Make log messages easier
to find. Add 'S' flag to state().
d103ee7843
Include misc1.c change from patch 8.1.2062.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: no support for custom cmdline completion
Solution: Add new vimscript functions
Add the following two functions:
- getcmdcompltype() returns custom and customlist functions
- getcompletion() supports both custom and customlist
closes: vim/vim#1222892997dda78
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: reverse() does not work for a String.
Solution: Implement reverse() for a String. (Yegappan Lakshmanan,
closesvim/vim#12179)
03ff1c2dde
vim-patch:9.0.1738: Duplicate code to reverse a string
Problem: Duplicate code to reverse a string
Solution: Move reverse_text() to strings.c and remove string_reverse().
closes: vim/vim#128474dd266cb66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: vim/vim#12633825cf813fa
Problem: Accepting one and zero for the second sort() argument is strange.
Solution: Disallow using one and zero in Vim9 script.
2007dd49f5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Functions implementing reduce and map are too long.
Solution: Use a function for each type of value. Add a few more test cases
and add to the help. (Yegappan Lakshmanan, closesvim/vim#9370)
389b72196e
Partial port as this doesn't include handling for non-materialized List.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cannot use reduce() for a string.
Solution: Make reduce() work with a string. (Naruhiko Nishino, closesvim/vim#9366)
0ccb5842f5
Omit tv_get_first_char() as it doesn't really save much code.
Co-authored-by: rbtnn <naru123456789@gmail.com>
Problem: Cannot filter or map characters in a string.
Solution: Make filter() and map() work on a string. (Naruhiko Nishino,
closesvim/vim#9327)
c479ce032f
Co-authored-by: rbtnn <naru123456789@gmail.com>
Problem: virtcol2col returns last byte of a multi-byte char
Solution: Make it return the first byte for a multi-byte char
closes: vim/vim#12786closes: vim/vim#12799b209b86e66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cannot use positional arguments for printf()
Solution: Support positional arguments in string formatting
closes: vim/vim#121400c6181fec4
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: cannot store custom data in quickfix list
Solution: add `user_data` field for the quickfix list
closes: vim/vim#11818ca6ac99077
Co-authored-by: Tom Praschan <13141438+tom-anders@users.noreply.github.com>
Problem: undotree() only works for the current buffer
Solution: Add an optional "buffer number" parameter to undotree(). If
omitted, use the current buffer for backwards compatibility.
closes: vim/vim#4001closes: vim/vim#122925fee111149
Co-authored-by: Devin J. Pohly <djpohly@gmail.com>
