Problem: filetype: supertux2 config files detected as lisp
Solution: detect supertux2 config files as scheme instead
(Wu, Zhenyu)
References:
https://github.com/SuperTux/supertux/wiki/S-Expression
supertux uses #t and #f as bool type, which is same as scheme, not
common lisp
closes: vim/vim#16287e62d93ead1
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
vim.diagnostic.set_list() uses chistory to restore the actively selected
entry whenever necessary. This however also results in it displaying
some output in the message bar, but this output isn't useful (and can
even be distracting) when opening the quickfix window. This fixes this
by silencing the chistory command.
Problem:
Since 2a7d0ed614, build fails with glibc
version 2.28 / RHEL8 (where `termios.h` does not include unistd.h and is
therefore missing `_POSIX_VDISABLE`):
…/src/nvim/tui/termkey/termkey.c: In function 'termkey_start':
…/src/nvim/tui/termkey/termkey.c:516:31: error: '_POSIX_VDISABLE' undeclared (first use in this function)
516 | termios.c_cc[VQUIT] = _POSIX_VDISABLE;
| ^~~~~~~~~~~~~~~
…/src/nvim/tui/termkey/termkey.c:516:31: note: each undeclared identifier is reported only once for each function it appears in
Solution:
- Undo the `<termios.h>` change and mark the imports with `IWYU pragma: keep`.
Previously, `make lint` would invoke `lintcommit` which would fail if
there were fixup or other disallowed commits. This would disrupt local
development as developers would often want non-commit linting to work
early on without needing to adhere to the strict commit rules.
Regression from 2a7d0ed614, which removed
header that is only needed if wasmtime support is enabled. Prevent this
from happening again by wrapping the include in a `HAVE_WASMTIME` check.
Problem:
The :has() method of the vim.version.range() result is not documented
though it's mentioned in examples.
Solution:
Mention it in the range() result doc.
Contribute the core of my vim-graphql project (ftplugin, indent, syntax)
to the Vim project. This replaces the basic ftplugin support that was
already in the runtime with a more complete set of filetype settings. I
can assume maintainership for all of these files.
I'll continue to maintain the higher-level embedded filetype support
separately (in vim-graphql) for now, because it's fairly complex, but we
can consider integrating that code directly into vim later.
runtime files use the MIT license.
closes: vim/vim#162734ce1cb5bf1
Co-authored-by: Jon Parise <jon@indelible.org>
Problem: filetype: APKBUILD files not correctly detected
Solution: detect 'APKBUILD' files as apkbuild filetype,
include a apkbuild syntax script (which basically
just sources the sh.vim syntax file)
(Hugo Osvaldo Barrera)
Vim plugins (e.g.: ALE, nvim-lspconfig, etc) rely on filetype to
determine which integrations/helpers are applicable. They expect
filetype=apkbuild for APKBUILD files.
On the other hand, plugins also enable bash-specific linters and
functionality when filetype=bash, but APKBUILD files are POSIX sh, not
bash, so these often provide bogus results.
Change the filetype for APKBUILD to a 'apkbuild', so that tools and
ftplugin can properly target these files. This filetype will use the
existing `sh` syntax rules, since these are applicable for them.
7cb24917a1
Co-authored-by: Hugo Osvaldo Barrera' via vim_dev <vim_dev@googlegroups.com>
- Typo/bug in msg_outtrans_long passing string length as "hist" argument.
- Avoid truncating message in msg_outtrans_long with ext_messages (followup to
1097d239c3).
- Remove `_hl` from `msg_keep`, `smsg_keep` as there is no non-`_hl` variant.
- `msg_printf_hl` is removed (identical to `smsg` except it sets
`msg_scroll = true`, seemingly as a caveat to force a more prompt in
cmdline mode). Move this logic to the only the only place this was
used in ex_getln.c.
Problem: Unable to tell what highlight the prompt part of a
cmdline_show event should have, and whether cmdline_hide was
emitted after aborting.
Solution: Add additional arguments hl_id to cmdline_show, and abort to
cmdline_hide.
It's probably not worth adding the C test files to regular formatting as
they're pretty much never touched, but ensuring the files are formatted
according to our standards and getting rid of warnings is a cheap
one-time fix.
Problem: LSP configs on the runtimepath must have the same name as the
LSP server and must also explicitly set the name in vim.lsp.config. This
is redundant and creates a footgun where a user may accidentally use the
wrong name when assigning to the vim.lsp.config table.
Solution: Return a table from lsp/ runtimepath files instead
CID 516419: Integer handling issues (INTEGER_OVERFLOW)
/src/nvim/message.c: 2242 in msg_puts_display()
2236 }
2237 // Concat pieces with the same highlight
2238 size_t len = maxlen < 0 ? strlen(str) : strnlen(str, (size_t)maxlen);
2239 ga_concat_len(&msg_ext_last_chunk, str, len);
2240 msg_ext_cur_len += len;
2241 // When message ends in newline, reset variables used to format message: msg_advance().
>>> CID 516419: Integer handling issues (INTEGER_OVERFLOW)
>>> Expression "len - 1UL", which is equal to 18446744073709551615, where "len" is known to be equal to 0, underflows the type that receives it, an unsigned integer 64 bits wide.
2242 if (str[len - 1] == '\n') {
2243 msg_ext_cur_len = 0;
2244 msg_col = 0;
2245 }
2246 return;
2247 }
The maximum signed value on 32-bit systems is 2 ^ 31 - 1. When using 2 ^ 31 for
the default timeout, the value would overflow on such systems resulting in
a negative value, which caused a stack trace when calling wait() without
a timeout.
Problem:
`termopen` has long been a superficial wrapper around `jobstart`, and
has no real purpose. Also, `vim.system` and `nvim_open_term` presumably
will replace all features of `jobstart` and `termopen`, so centralizing
the logic will help with that.
Solution:
- Introduce `eval/deprecated.c`, where all deprecated eval funcs will live.
- Introduce "term" flag of `jobstart`.
- Deprecate `termopen`.
Also avoid going down message callstack with empty message, and remove expected grid for some tests where it did not change, and we are just testing for expected messages.
- Replace all uses of vim.regex with simpler Lua patterns.
- Replace all uses of vim.fn.substitute with string.gsub.
- Rework error handling so expected errors are passed back via a return.
- These get routed up an passed to `vim.notify()`
- Any other errors will cause a stack trace.
- Reworked the module initialization of `localfile_arg`
- Updated all type annotations.
- Refactored CLI completion by introduction a parse_cmdline()
function.
- Simplified `show_toc()`
- Refactor highlighting
- Inline some functions
- Fix completion on MacOS 13 and earlier.
- Prefer `manpath -q` over `man -w`
- Make completion more efficient by avoiding vim.fn.sort and vim.fn.uniq
- Reimplement using a single loop
Problem:
Language server version information missing from `:checkhealth vim.lsp`.
Solution:
Store `InitializeResult.serverInfo.version` from the `initialize`
response and display for each client in `:checkhealth vim.lsp`.
Problem: ComplMatchIns doesn't work after multibyte chars
(after v9.1.0936)
Solution: Use (ptr - line) instead of wlv.col (zeertzjq).
closes: vim/vim#16233f4ccada5c3
Problem: cannot highlight completed text
Solution: (optionally) highlight auto-completed text using the
ComplMatchIns highlight group (glepnir)
closes: vim/vim#161736a38aff218
Co-authored-by: glepnir <glephunter@gmail.com>
When a terminal application running inside the terminal emulator sets
the cursor shape or blink status of the cursor, update the cursor in the
parent terminal to match.
This removes the "virtual cursor" that has been in use by the terminal
emulator since the beginning. The original rationale for using the
virtual cursor was to avoid having to support additional UI methods to
change the cursor color for other (non-TUI) UIs, instead relying on the
TermCursor and TermCursorNC highlight groups.
The TermCursor highlight group is now used in the default 'guicursor'
value, which has a new entry for Terminal mode. However, the
TermCursorNC highlight group is no longer supported: since terminal
windows now use the real cursor, when the window is not focused there is
no cursor displayed in the window at all, so there is nothing to
highlight. Users can still use the StatusLineTermNC highlight group to
differentiate non-focused terminal windows.
BREAKING CHANGE: The TermCursorNC highlight group is no longer supported.
Problem: Two separate try/end wrappers, that only marginally differ by
restoring a few variables. Wrappers that don't restore
previous state are dangerous to use in "api-fast" functions.
Solution: Remove wrappers that don't restore the previous state.
Always use TRY_WRAP.
Problem: hard to view an existing buffer in the preview window
Solution: add the :pbuffer command (Yinzuo Jiang)
Similar as `:pedit` and `:buffer` command. `:pbuffer` edits buffer [N]
from the buffer list in the preview window.
`:pbuffer` can also open special buffer, for example terminal buffer.
closes: vim/vim#16222a2a2fe841e
Cherry-pick Test_popup_and_previewwindow_dump() changes from patch
9.0.0625.
Cherry-pick Run_noroom_for_newwindow_test() changes from patches
8.2.0432 and 9.0.0363.
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: exclusive selection not respected when re-selecting block mode
(Matt Ellis)
Solution: advance selection by another character when using
selection=exclusive and visual block mode
fixes: vim/vim#16202closes: vim/vim#16219bb95589473
Co-authored-by: Christian Brabandt <cb@256bit.org>
