Delete ispConfig.py

v1.2/ispConfig.py

@@ -1,79 +0,0 @@
-# 'fq_codel' or 'cake diffserv4'
-# 'cake diffserv4' is recommended
-
-# fqOrCAKE = 'fq_codel'
-fqOrCAKE = 'cake diffserv4'
-
-# How many Mbps are available to the edge of this network
-upstreamBandwidthCapacityDownloadMbps = 1000
-upstreamBandwidthCapacityUploadMbps = 1000
-
-# Devices in ShapedDevices.csv without a defined ParentNode will be placed under a generated
-# parent node, evenly spread out across CPU cores. Here, define the bandwidth limit for each
-# of those generated parent nodes.
-generatedPNDownloadMbps = 1000
-generatedPNUploadMbps = 1000
-
-# Traffic from devices not specified in Shaper.csv will be rate limited by an HTB of this many Mbps
-defaultClassCapacityDownloadMbps = 500
-defaultClassCapacityUploadMbps = 500
-
-# Interface connected to core router
-interfaceA = 'eth1'
-
-# Interface connected to edge router
-interfaceB = 'eth2'
-
-# Use XDP? If yes, multiple CPU cores can be used. Limits to IPv4 only. Throughput of 11 Gbps+
-# If using IPv6, choose False. False will limit throughput to 3-6 Gbps
-usingXDP = True
-
-# Allow shell commands. False causes commands print to console only without being executed.
-# MUST BE ENABLED FOR PROGRAM TO FUNCTION
-enableActualShellCommands = True
-
-# Add 'sudo' before execution of any shell commands. May be required depending on distribution and environment.
-runShellCommandsAsSudo = False
-
-# Bandwidth Graphing
-bandwidthGraphingEnabled = True
-influxDBurl = "http://localhost:8086"
-influxDBBucket = "libreqos"
-influxDBOrg = "Your ISP Name Here"
-influxDBtoken = ""
-
-# Latency Graphing
-latencyGraphingEnabled = False
-ppingLocation = "pping"
-
-# NMS/CRM Integration
-# If a device shows a WAN IP within these subnets, assume they are behind NAT / un-shapable, and ignore them
-ignoreSubnets = ['192.168.0.0/16']
-allowedSubnets = ['100.64.0.0/10']
-# Optional UISP integration
-automaticImportUISP = False
-# Everything before /nms/ on your UISP instance
-uispBaseURL = 'https://examplesite.com'
-# UISP Auth Token
-uispAuthToken = ''
-# UISP | Whether to shape router at customer premises, or instead shape the station radio. When station radio is in
-# router mode, use 'station'. Otherwise, use 'router'.
-shapeRouterOrStation = 'router'
-# List any sites that should not be included, with each site name surrounded by '' and seperated by commas
-excludeSites = []
-# If you use IPv6, this can be used to find associated IPv6 prefixes for your clients' IPv4 addresses, and match them to those devices
-findIPv6usingMikrotik = False
-# If you want to provide a safe cushion for speed test results to prevent customer complains, you can set this to 1.15 (15% above plan rate).
-# If not, you can leave as 1.0
-bandwidthOverheadFactor = 1.0
-# For edge cases, set the respective ParentNode for these CPEs
-exceptionCPEs = {}
-                #  'CPE-SomeLocation1': 'AP-SomeLocation1',
-                #  'CPE-SomeLocation2': 'AP-SomeLocation2',
-                #}
-
-# API Auth
-apiUsername = "testUser"
-apiPassword = "changeme8343486806"
-apiHostIP = "127.0.0.1"
-apiHostPost = 5000