Recipe: Switch-Centric Fabric with Maintenance Bypass (SD-WAN Variant Included)

Use this pattern when the network core is switch-centric, VLAN-driven, and you want shaped primary paths plus backup bypass paths for no-downtime LibreQoS maintenance.

Fit

Best for: fabrics where explicit L2/L3 path engineering is already in place.
Avoid when: path ownership and parent mapping are unclear across systems.

Topology Pattern

Primary (shaped) VLAN paths traversing LibreQoS:

EdgeA <-> CoreA
EdgeA <-> CoreB
EdgeB <-> CoreA
EdgeB <-> CoreB

Backup (bypass) VLAN paths should also exist, with dynamic routing policy preferring shaped paths during normal operation.

Example Topology Illustrations

Shaped VLAN Set

flowchart LR
    EA[EdgeA Router]
    EB[EdgeB Router]
    SW[SW1/SW2 Switch Pair]
    LQ[LibreQoS Bridge]
    CA[CoreA Router]
    CB[CoreB Router]

    EA --> SW
    EB --> SW
    SW -->|Shaped VLANs 110,120,210,220| LQ
    LQ --> SW
    SW --> CA
    SW --> CB

Shaped VLAN mapping:

VLAN 110: EdgeA <-> CoreA (through LibreQoS)
VLAN 120: EdgeA <-> CoreB (through LibreQoS)
VLAN 210: EdgeB <-> CoreA (through LibreQoS)
VLAN 220: EdgeB <-> CoreB (through LibreQoS)

Bypass VLAN Set

flowchart LR
    EA[EdgeA Router]
    EB[EdgeB Router]
    SW[SW1/SW2 Switch Pair]
    CA[CoreA Router]
    CB[CoreB Router]

    EA -.-> SW
    EB -.-> SW
    SW -. Bypass VLANs 310,320,410,420 .-> CA
    SW -. Bypass VLANs 310,320,410,420 .-> CB

Bypass VLAN mapping:

VLAN 310: EdgeA <-> CoreA (bypass)
VLAN 320: EdgeA <-> CoreB (bypass)
VLAN 410: EdgeB <-> CoreA (bypass)
VLAN 420: EdgeB <-> CoreB (bypass)

What this shows:

Shaped VLANs traverse the switch pair and the LibreQoS bridge path.
Bypass VLANs traverse the switch pair without traversing LibreQoS.
SW1/SW2 are shown as a single logical switch-pair node for readability.
This is a logical VLAN-path illustration, not a full physical cabling diagram.

MikroTik RouterOS v7 Example (Conceptual OSPF Preference)

Set lower OSPF cost on shaped interfaces, higher cost on bypass interfaces.

/routing ospf instance
add name=default-v2 router-id=10.255.255.1

/routing ospf area
add name=backbone-v2 area-id=0.0.0.0 instance=default-v2

/routing ospf interface-template
add interfaces=vlan-edgea-corea-lq area=backbone-v2 cost=10
add interfaces=vlan-edgea-coreb-lq area=backbone-v2 cost=10
add interfaces=vlan-edgeb-corea-lq area=backbone-v2 cost=10
add interfaces=vlan-edgeb-coreb-lq area=backbone-v2 cost=10
add interfaces=vlan-edgea-corea-bypass area=backbone-v2 cost=200
add interfaces=vlan-edgea-coreb-bypass area=backbone-v2 cost=200
add interfaces=vlan-edgeb-corea-bypass area=backbone-v2 cost=200
add interfaces=vlan-edgeb-coreb-bypass area=backbone-v2 cost=200

Adjust interface names/costs to match your design policy.

Implementation

Build and verify all primary and bypass VLAN interfaces.
Keep path preference deterministic (OSPF/BGP policy).
Place LibreQoS inline on the primary VLAN paths.
Validate failover and failback behavior during a maintenance window.

Validation Checklist

Normal state: traffic follows shaped primary path.
Failure or maintenance state: routing converges to bypass path.
Recovery state: traffic returns to shaped path without instability.
WebUI health remains stable across transitions.

SD-WAN Variant

For SD-WAN, use the same primary/bypass control model:

Primary underlay paths pass through LibreQoS shaper path.
Secondary underlay paths bypass as maintenance/failure fallback.
Keep node naming and parent relationships stable so hierarchy does not churn after path events.

Rollback

Temporarily force routing preference to bypass paths.
Restore previous LibreQoS path policy.
Re-enable shaped path preference after verification.

4.0 KiB Raw Permalink Blame History