Follow up to 6f8f6a7726
Prior to the linked commit, the `uploads#create` endpoint had a `upload_type` and `type` param that acted as aliases for each other and raised an error if both of them were missing. In the linked commit, we removed the `type` param and always required the `upload_type` param which break API consumers that only included `type` in their requests.
This commit adds back the `type` param temporarily and introduces a deprecation message for it so that API consumers are made aware of the eventual removal of the `type` param.
Prior to Uppy, the `uploads#create` endpoint used to receive a `type` param that indicated the purpose/target of the upload, such as `avatar`, `site_setting` and so on. With the introduction of Uppy, the `type` param became the MIME type of the file being uploaded, and the purpose/target of the upload became a new param called `upload_type`, however the backend could still use the `type` param (which now contains MIME type) as the purpose/target of the upload if `upload_type` is absent.
We technically don't need to send the MIME type over the network, but it seems like it's done by Uppy and we have no control over the `type` param that Uppy includes:
758de8167b/app/assets/javascripts/discourse/app/lib/uppy/uppy-upload.js (L146-L151)
This commit does a couple of things:
1. It amends the `uploads#create` endpoint so it always requires the `upload_type` param and doesn't fallback to `type` if `upload_type` is absent
2. It forces consumers of the `UppyUpload` class (and by extension `UppyImageUploader`) to specify `type` of the upload
Internal topic: t/140945.
* System user attachment size WIP
* spec check
* controller update
* add max to system_user_max_attachment_size_kb
* DEV: update to use static method for `max_attachment_size_for_user`
add test to use large image.
add check for failure.
* DEV: update `system_user_max_attachment_size_kb` default value to 0
remove unecessary test.
update tests to reflect the new default value of `system_user_max_attachment_size_kb`
* DEV: update maximum_file_size to check when is an attachment made by a system user
Add tests for when `system_user_max_attachment_size_kb` is over and under the limit
Add test for checking interaction with `max_attachment_size_kb`
* DEV: move `max_attachment_size_for_user` to private methods
* DEV: turn `max_attachment_size_for_user` into a static method
* DEV: typo in test case
* DEV: move max_attachment_size_for_user to private class method
* Revert "DEV: move max_attachment_size_for_user to private class method"
This reverts commit 5d5ae0b715.
---------
Co-authored-by: Gabriel Grubba <gabriel@discourse.org>
We want to allow admins to make new required fields apply to existing users. In order for this to work we need to have a way to make those users fill up the fields on their next page load. This is very similar to how adding a 2FA requirement post-fact works. Users will be redirected to a page where they can fill up the remaining required fields, and until they do that they won't be able to do anything else.
This commit moves some code out of UploadController#show_secure
so it can be reused in other controllers if a secure upload
needs to have permission checks run.
This change converts the allow_uploaded_avatars site setting to uploaded_avatars_allowed_groups.
See: https://meta.discourse.org/t/283408
Hides the old setting
Adds the new site setting
Adds a deprecation warning
Updates to use the new setting
Adds a migration to fill in the new setting if the old setting was changed
Adds an entry to the site_setting.keywords section
Updates tests to account for the new change
After a couple of months, we will remove the allow_uploaded_avatars setting entirely.
Internal ref: /t/117248
When uploading images via direct to S3 upload, we were
assuming that we could not pre-emptively check the file
size because the client may do preprocessing to reduce
the size, and UploadCreator could also further reduce the
size.
This, however, is not true of gifs, so we would have an
issue where you upload a gif > the max_image_size_kb
setting and had to wait until the upload completed for
this error to show.
Now, instead, when we direct upload gifs to S3, we check
the size straight away and present a file size error to
the user rather than making them wait. This will increase
meme efficiency by approximately 1000%.
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
Previously we hardcoded the DOWNLOAD_URL_EXPIRES_AFTER_SECONDS const
inside S3Helper to be 5 minutes (300 seconds). For various reasons,
some hosted sites may need this to be longer for other integrations.
The maximum expiry time for presigned URLs is 1 week (which is
604800 seconds), so that has been added as a validation on the
setting as well. The setting is hidden because 99% of the time
it should not be changed.
When creating files with create-multipart, if the file
size was somehow zero we were showing a very unhelpful
error message to the user. Now we show a nicer message,
and proactively don't call the API if we know the file
size is 0 bytes in JS, along with extra console logging
to help with debugging.
This commit refactors the direct external upload routes (get presigned
put, complete external, create/abort/complete multipart) into a
helper which is then included in both BackupController and the
UploadController. This is done so UploadController doesn't need
strange backup logic added to it, and so each controller implementing
this helper can do their own validation/error handling nicely.
This is a follow up to e4350bb966
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
We are only using list_multipart_parts right now in the
uploads controller for multipart uploads to check if the
upload exists; thus we don't need up to 1000 parts.
Also adding a note for future explorers that list_multipart_parts
only gets 1000 parts max, and adding params for max parts
and starting parts.
This commit introduces a new s3:ensure_cors_rules rake task
that is run as a prerequisite to s3:upload_assets. This rake
task calls out to the S3CorsRulesets class to ensure that
the 3 relevant sets of CORS rules are applied, depending on
site settings:
* assets
* direct S3 backups
* direct S3 uploads
This works for both Global S3 settings and Database S3 settings
(the latter set directly via SiteSetting).
As it is, only one rule can be applied, which is generally
the assets rule as it is called first. This commit changes
the ensure_cors! method to be able to apply new rules as
well as the existing ones.
This commit also slightly changes the existing rules to cover
direct S3 uploads via uppy, especially multipart, which requires
some more headers.
Instead of using image-uploader, which relies on the old
UploadMixin, we can now use the uppy-image-uploader which
uses the new UppyUploadMixin which is stable enough and
supports both regular XHR uploads and direct S3 uploads,
controlled by a site setting (default to XHR).
At some point it may make sense to rename uppy-image-uploader
back to image-uploader, once we have gone through plugins
etc. and given a bit of deprecation time period.
This commit also fixes `for_private_message`, `for_site_setting`,
and `pasted` flags not being sent via uppy uploads onto the
UploadCreator, both via regular XHR uploads and also through
external/multipart uploads.
The uploaders changed are:
* site setting images
* badge images
* category logo
* category background
* group flair
* profile background
* profile card background
This commit allows for measuring the time taken for
individual uploads via the new uppy interfaces, only
if the enable_upload_debug_mode site setting is enabled.
Also in this PR, for upload errors with a specific message
locally, we return the real message to show in the modal
instead of the upload.failed message so the developer
does not have to dig around in logs.
The file size error messages for max_image_size_kb and
max_attachment_size_kb are shown to the user in the KB
format, regardless of how large the limit is. Since we
are going to support uploading much larger files soon,
this KB-based limit soon becomes unfriendly to the end
user.
For example, if the max attachment size is set to 512000
KB, this is what the user sees:
> Sorry, the file you are trying to upload is too big (maximum
size is 512000KB)
This makes the user do math. In almost all file explorers that
a regular user would be familiar width, the file size is shown
in a format based on the maximum increment (e.g. KB, MB, GB).
This commit changes the behaviour to output a humanized file size
instead of the raw KB. For the above example, it would now say:
> Sorry, the file you are trying to upload is too big (maximum
size is 512 MB)
This humanization also handles decimals, e.g. 1536KB = 1.5 MB
The generate_presigned_put endpoint for direct external uploads
(such as the one for the uppy-image-uploader) records allowed
S3 metadata values on the uploaded object. We use this to store
the sha1-checksum generated by the UppyChecksum plugin, for later
comparison in ExternalUploadManager.
However, we were not doing this for the create_multipart endpoint,
so the checksum was never captured and compared correctly.
Also includes a fix to make sure UppyChecksum is the last preprocessor to run.
It is important that the UppyChecksum preprocessor is the last one to
be added; the preprocessors are run in order and since other preprocessors
may modify the file (e.g. the UppyMediaOptimization one), we need to
checksum once we are sure the file data has "settled".
This pull request introduces the endpoints required, and the JavaScript functionality in the `ComposerUppyUpload` mixin, for direct S3 multipart uploads. There are four new endpoints in the uploads controller:
* `create-multipart.json` - Creates the multipart upload in S3 along with an `ExternalUploadStub` record, storing information about the file in the same way as `generate-presigned-put.json` does for regular direct S3 uploads
* `batch-presign-multipart-parts.json` - Takes a list of part numbers and the unique identifier for an `ExternalUploadStub` record, and generates the presigned URLs for those parts if the multipart upload still exists and if the user has permission to access that upload
* `complete-multipart.json` - Completes the multipart upload in S3. Needs the full list of part numbers and their associated ETags which are returned when the part is uploaded to the presigned URL above. Only works if the user has permission to access the associated `ExternalUploadStub` record and the multipart upload still exists.
After we confirm the upload is complete in S3, we go through the regular `UploadCreator` flow, the same as `complete-external-upload.json`, and promote the temporary upload S3 into a full `Upload` record, moving it to its final destination.
* `abort-multipart.json` - Aborts the multipart upload on S3 and destroys the `ExternalUploadStub` record if the user has permission to access that upload.
Also added are a few new columns to `ExternalUploadStub`:
* multipart - Whether or not this is a multipart upload
* external_upload_identifier - The "upload ID" for an S3 multipart upload
* filesize - The size of the file when the `create-multipart.json` or `generate-presigned-put.json` is called. This is used for validation.
When the user completes a direct S3 upload, either regular or multipart, we take the `filesize` that was captured when the `ExternalUploadStub` was first created and compare it with the final `Content-Length` size of the file where it is stored in S3. Then, if the two do not match, we throw an error, delete the file on S3, and ban the user from uploading files for N (default 5) minutes. This would only happen if the user uploads a different file than what they first specified, or in the case of multipart uploads uploaded larger chunks than needed. This is done to prevent abuse of S3 storage by bad actors.
Also included in this PR is an update to vendor/uppy.js. This has been built locally from the latest uppy source at d613b849a6. This must be done so that I can get my multipart upload changes into Discourse. When the Uppy team cuts a proper release, we can bump the package.json versions instead.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
This PR adds the first use of Uppy in our codebase, hidden behind a enable_experimental_image_uploader site setting. When the setting is enabled only the user card background uploader will use the new uppy-image-uploader component added in this PR.
I've introduced an UppyUpload mixin that has feature parity with the existing Upload mixin, and improves it slightly to deal with multiple/single file distinctions and validations better. For now, this just supports the XHRUpload plugin for uppy, which keeps our existing POST to /uploads.json.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This reverts commit e3de45359f.
We need to improve out strategy by adding a cache breaker with this change ... some assets on CDNs and clients may have incorrect CORS headers which can cause stuff to break.
The download link on the lightbox for images was not downloading the image if the upload was marked secure, because the code in the upload controller route was not respecting the dl=1 param for force download.
This PR fixes this so the download link works for secure images as well as regular ligthboxed images.
* strip out the href and xlink:href attributes from use element that
are _not_ anchors in svgs which can be used for XSS
* adding the content-disposition: attachment ensures that
uploaded SVGs cannot be opened and executed using the XSS exploit.
svgs embedded using an img tag do not suffer from the same exploit
* Change S3Helper::DOWNLOAD_URL_EXPIRES_AFTER_SECONDS to 5 minutes, which controls presigned URL expiry and secure-media route cache time.
* This is done because of the composer preview refreshing while typing causes a lot of requests sent to our server because of the short URL expiry. If this ends up being not enough we can always increase the time or explore other avenues (e.g. GitHub has a 7 day validity for secure URLs)
Signed S3 URLs are valid for 15 seconds, so we can safely allow the browser to cache them for 10 seconds. This should help with large numbers of requests when composing a post with many images.
If the “secure media” site setting is enabled then ALL files uploaded to Discourse (images, video, audio, pdf, txt, zip etc. etc.) will follow the secure media rules. The “prevent anons from downloading files” setting will no longer have any bearing on upload security. Basically, the feature will more appropriately be called “secure uploads” instead of “secure media”.
This is being done because there are communities out there that would like all attachments and media to be secure based on category rules but still allow anonymous users to download attachments in public places, which is not possible in the current arrangement.
Meta report: https://meta.discourse.org/t/short-url-secure-uploads-s3/144224
* if the show_short route is hit for an upload that is
secure, we redirect to the secure presigned URL. however
this was not taking into account multisite so the db name
was left off the path which broke the presigned URL
* we now use the correct url_for method if we know the
upload (like in the show_short case) which takes into
account multisite
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
if SiteSetting.secure_media is disabled we still want to
redirect to the signed url for uploads that are marked as
secure because their ACLs are probably still private
* Add a rake task to disable secure media. This sets all uploads to `secure: false`, changes the upload ACL to public, and rebakes all the posts using the uploads to make sure they point to the correct URLs. This is in a transaction for each upload with the upload being updated the last step, so if the task fails it can be resumed.
* Also allow viewing media via the secure url if secure media is disabled, redirecting to the normal CDN url, because otherwise media links will be broken while we go and rebake all the posts + update ACLs
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
* Support private uploads in S3
* Use localStore for local avatars
* Add job to update private upload ACL on S3
* Test multisite paths
* update ACL for private uploads in migrate_to_s3 task
