Previously we hand no tests for `include_raw` which some consumers may
depend on.
Specifically, Discourse AI uses it to get raw markdown for a set of posts
on a topic.
Also cleans up tests so they lint with default ruby
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_level_to_allow_invite site setting to invite_allowed_groups.
Nothing much of note. This is used in one place and there's no fallout.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_to_edit_post site setting to edit_post_allowed_groups.
The old implementation will co-exist for a short period while I update any references in plugins and themes.
This change converts the min_trust_to_create_topic site setting to
create_topic_allowed_groups.
See: https://meta.discourse.org/t/283408
- Hides the old setting
- Adds the new site setting
- Add a deprecation warning
- Updates to use the new setting
- Adds a migration to fill in the new setting if the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates tests to account for the new change
- After a couple of months, we will remove the min_trust_to_create_topicsetting entirely.
Internal ref: /t/117248
This change converts the min_trust_to_edit_wiki_post site setting to edit_wiki_post_allowed_groups.
See: https://meta.discourse.org/t/283408
Hides the old setting
Adds the new site setting
Add a deprecation warning
Updates to use the new setting
Adds a migration to fill in the new setting if the old setting was changed
Adds an entry to the site_setting.keywords section
Updates tests to account for the new change
After a couple of months, we will remove the email_in_min_trust setting entirely.
Internal ref: /t/117248
The `src` of js files is now dependent on the ember-cli/webpack build, so it's not a good thing to check in specs. In CI it passes because the ember-cli build is not run. But locally it would fail if you had a build in `app/assets/javascripts/discourse/dist`.
This commit updates the specs to check for the presence of a stable data attribute instead.
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
Why this change?
When the URL `/t/1234?preview_theme_id=21` is loaded, we redirect to
`/t/<topic slug>/1234` stripping the `preview_theme_id` query params.
What does this change do?
This change builds on 61248652cd and
simply adds the `preview_theme_id` query param when redirecting.
In #20135 we prevented invalid inputs from being accepted in category setting form fields on the front-end. We didn't do anything on the back-end at that time, because we were still discussing which path we wanted to take. Eventually we decided we want to move this to a new CategorySetting model.
This PR moves the require_topic_approval and require_reply_approval from custom fields to the new CategorySetting model.
This PR is nearly identical to #20580, which migrated num_auto_bump_daily, but since these are slightly more sensitive, they are moved after the previous one is verified.
We're seeing a large number of log noise from this endpoint due to malicious scanners that are trying to send clever params and seeing if they can break something.
This change simply rescues any NoMethodError during parameter parsing and re-raises a Discourse::InvalidParameters exception, which will be caught and render a 400.
Our code assumed the content_range interval was inclusive, but they are open-ended due to Postgres' [discrete range types](https://www.postgresql.org/docs/current/rangetypes.html#RANGETYPES-DISCRETE), meaning [1,2] will be represented as [1,3).
It also fixes some flaky tests due to test data not being correctly setup and the registry not being resetted after each test.
When we receive the stream parameter, we'll queue a job that periodically publishes partial updates, and after the summarization finishes, a final one with the completed version, plus metadata.
`summary-box` listens to these updates via MessageBus, and updates state accordingly.
This is a similar fix to 32d4810e2b
Why this change?
Prior to this change, there is a bug in `TopicsController#bulk`
where it does not dismiss new unred posts in sub-subcategories when the
`category_id` and `include_subcategories=true` params are present. This
is because the controller did not account for sub-subcategories when
fetching the category ids of the new topics that should be dismissed.
This commit fixes the problem by relying on the `Category.subcategory_ids` class
method which accounts for sub-subcategories.
What is the context for this change?
Prior to this change, there is a bug in `TopicsController#reset_new`
where it does not dismiss new topics in sub-subcategories when the
`category_id` and `include_subcategories=true` params are present. This
is because the controller did not account for sub-subcategories when
fetching the category ids of the new topics that should be dismissed.
This commit fixes the problem by relying on the `Category.subcategory_ids` class
method which accounts for sub-subcategories.
Why this change?
Prior to this change, dismissing unreads posts did not publish the
changes across clients for the same user. As a result, users can end up
seeing an unread count being present but saw no topics being loaded when
visiting the `/unread` route.
* FEATURE: Inline topic summary. Cached version accessible to everyone.
Anons and non-members of the `custom_summarization_allowed_groups_map` groups can see cached summaries for any accessible topic. After the first 12 hours and if the posts to summarize have changed, allowed users clicking on the button will automatically re-generate it.
* Ensure chat summaries work and prevent model hallucinations when there are no messages.
* FEATURE: Content custom summarization strategies.
This PR establishes a pattern for plugins to register alternative ways of summarizing content by extending a class that defines an interface.
Core controls which strategy we'll use and who has access to it through the `summarization_strategy` and `custom_summarization_allowed_groups`. It also defines the UI for summarizing topics.
Other plugins can access this summarization mechanism and implement their features, removing cross-plugin customizations, as it currently happens between chat and the discourse-ai plugin.
* Group membership validation and rate limiting
* Work with objects instead of classes
* Port summarization feature from discourse-ai to chat
* Rename available summaries to 'Top Replies' and 'Summary'
Display modal for combined new and unread view with options:
- [x] Dismiss new topics
- [x] Dismiss new posts
- [ ] Stop tracking these topics so they stop appearing in my new list
When a user chooses to move a topic/message to an existing topic/message, they can now opt to merge the posts chronologically (using a checkbox in the UI).
topic.url is a dangerous method to use, it is incompatible with our `sign_in`
helper.
This removes a bunch of places this was erroneously used and helps to avoid
future cargo culting.
This commit e62e93f83a slowed
down the spec, making it take ~4m in CI and a long time
locally.
This commit fixes the issue by just not doing the work in
the before block, it was not necessary, all we really need
to do is make sure everyone can PM.
54.37s -> 22.98s locally
Prior to this change, we were parsing `Post#cooked` every time we
serialize a post to extract the usernames of mentioned users in the
post. However, the only reason we have to do this is to support
displaying a user's status beside each mention in a post on the client side when
the `enable_user_status` site setting is enabled. When
`enable_user_status` is disabled, we should avoid having to parse
`Post#cooked` since there is no point in doing so.
Note that we don't have a database table and a model for post mentions yet, and I decided to implement it without adding one to avoid heavy data migrations. Still, we may want to add such a model later, that would be convenient, we have such a model for mentions in chat.
Note that status appears on all mentions on all posts in a topic except of the case when you just posted a new post, and it appeared on the bottom of the topic. On such posts, status won't be shown immediately for now (you'll need to reload the page to see the status). I'll take care of it in one of the following PRs.
This can no longer be used from the user interface and could be used to
generate useless topic invites notifications. This commit adds site
setting max_topic_invitations_per_minute to prevent invite spam.
cf. e62e93f83a
This PR also makes it so `bot` (negative ID) and `system` users are always allowed
to send PMs, since the old conditional was just based on `enable_personal_messages`
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
Hard deleting topics that contained soft deleted posts or small actions
used to create orphan posts because only the first post was hard
deleted. This commit adds an error message if there are still posts left
in the topic that must be hard deleted first or hard deletes all small
actions too immediately (there is no other way of hard deleting a small
action because there is no wrench menu).
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
Currently the only way to allow tagging on pms is to use the `allow_staff_to_tag_pms` site setting. We are removing that site setting and replacing it with `pm_tags_allowed_for_groups` which will allow for non staff tagging. It will be group based permissions instead of requiring the user to be staff.
If the existing value of `allow_staff_to_tag_pms` is `true` then we include the `staff` groups as a default for `pm_tags_allowed_for_groups`.
Previously, accessing the Rails app directly in development mode would give you assets from our 'legacy' Ember asset pipeline. The only way to run with Ember CLI assets was to run ember-cli as a proxy. This was quite limiting when working on things which are bypassed when using the ember-cli proxy (e.g. changes to `application.html.erb`). Also, since `ember-auto-import` introduced chunking, visiting `/theme-qunit` under Ember CLI was failing to include all necessary chunks.
This commit teaches Sprockets about our Ember CLI assets so that they can be used in development mode, and are automatically collected up under `/public/assets` during `assets:precompile`. As a bonus, this allows us to remove all the custom manifest modification from `assets:precompile`.
The key changes are:
- Introduce a shared `EmberCli.enabled?` helper
- When ember-cli is enabled, add ember-cli `/dist/assets` as the top-priority Rails asset directory
- Have ember-cli output a `chunks.json` manifest, and teach `preload_script` to read it and append the correct chunks to their associated `afterFile`
- Remove most custom ember-cli logic from the `assets:precompile` step. Instead, rely on Rails to take care of pulling the 'precompiled' assets into the `public/assets` directory. Move the 'renaming' logic to runtime, so it can be used in development mode as well.
- Remove fingerprinting from `ember-cli-build`, and allow Rails to take care of things
Long-term, we may want to replace Sprockets with the lighter-weight Propshaft. The changes made in this commit have been made with that long-term goal in mind.
tldr: when you visit the rails app directly, you'll now be served the current ember-cli assets. To keep these up-to-date make sure either `ember serve`, or `ember build --watch` is running. If you really want to load the old non-ember-cli assets, then you should start the server with `EMBER_CLI_PROD_ASSETS=0`. (the legacy asset pipeline will be removed very soon)
* DEV: Allow params to be passed on topic redirects
There are several places where we redirect a url to a standard topic url
like `/t/:slug/:topic_id` but we weren't always passing query parameters
to the new url.
This change allows a few more query params to be included on the
redirect. The new params that are permitted are page, print, and
filter_top_level_replies. Any new params will need to be specified.
This also prevents the odd trailing empty page param that would
sometimes appear on a redirect. `/t/:slug/:id.json?page=`
* rubocop: fix missing space after comma
* fix another page= reference
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
This update topic route has never worked. Better late than never. I am
in favor of using non-slug urls when using the api so I do think we
should fix this route.
Just thought I would update the `:id` param to `:topic_id` here in the
routes file instead of updating the controller to handle both params.
Added a spec to test this route.
Also added the same constraint we have on other topic routes to ensure
we only pass in an ID that is a digit.
