We some times get the following failure on Github CI:
```
expected StandardError with message matching /some.host/, got #<Socket::ResolutionError: getaddrinfo: Temporary failure in name resolution> with backtrace:
```
There have been too many flaky tests as a result of leaking state in
Redis so it is easier to resolve them by ensuring we flush Redis'
database.
Locally on my machine, calling `Discourse.redis.flushdb` takes around
0.1ms which means this change will have very little impact on test
runtimes.
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
* DEV: Upgrade Rails to 7.1
* FIX: Remove references to `Rails.logger.chained`
`Rails.logger.chained` was provided by Logster before Rails 7.1
introduced their broadcast logger. Now all the loggers are added to
`Rails.logger.broadcasts`.
Some code in our initializers was still using `chained` instead of
`broadcasts`.
* DEV: Make parameters optional to all FakeLogger methods
* FIX: Set `override_level` on Logster loggers (#27519)
A followup to f595d599dd
* FIX: Don’t duplicate Rack response
---------
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
* Revert "FIX: Set `override_level` on Logster loggers (#27519)"
This reverts commit c1b0488c54.
* Revert "DEV: Make parameters optional to all FakeLogger methods"
This reverts commit 3318dad7b4.
* Revert "FIX: Remove references to `Rails.logger.chained`"
This reverts commit f595d599dd.
* Revert "DEV: Upgrade Rails to 7.1"
This reverts commit 081b00391e.
This commit addresses an issue for sites where secure_uploads
is turned on after the site has been operating without it for
some time.
When uploads are linked when they are used inside a post,
we were setting the access_control_post_id unconditionally
if it was NULL to that post ID and secure_uploads was true.
However this causes issues if an upload has been used in a
few different places, especially if a post was previously
used in a PM and marked secure, so we end up with a case of
the upload using a public post for its access control, which
causes URLs to not use the /secure-uploads/ path in the post,
breaking things like image uploads.
We should only set the access_control_post_id if the post is the first time the
upload is referenced so it cannot hijack uploads from other places.
Why this change?
This is a follow up to 897be75941.
When updating `net-smtp` from `0.4.x` to `0.5.x`, our test suite passed
but the error `ArgumentError: SMTP-AUTH requested but missing user name`
was being thrown in production leading to emails being failed to send
out via SMTP.
This commit adds a test to ensure that our production SMTP settings will
at least attemp to connect to an SMTP server.
For performance reasons we don't automatically add fabricated users to trust level auto-groups. However, when explicitly passing a trust level to the fabricator, in 99% of cases it means that trust level is relevant for the test, and we need the groups.
This change makes it so that when a trust level is explicitly passed to the fabricator, the auto-groups are refreshed. There's no longer a need to also pass refresh_auto_groups: true, which means clearer tests, fewer mistakes, and less confusion.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_level_to_tag_topics site setting to tag_topic_allowed_groups.
We have all these calls to Group.refresh_automatic_groups! littered throughout the tests. Including tests that are seemingly unrelated to groups. This is because automatic group memberships aren't fabricated when making a vanilla user. There are two places where you'd want to use this:
You have fabricated a user that needs a certain trust level (which is now based on group membership.)
You need the system user to have a certain trust level.
In the first case, we can pass refresh_auto_groups: true to the fabricator instead. This is a more lightweight operation that only considers a single user, instead of all users in all groups.
The second case is no longer a thing after #25400.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_level_to_tag_topics site setting to tag_topic_allowed_groups.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_level_to_create_tag site setting to create_tag_allowed_groups.
This PR maintains backwards compatibility until we can update plugins and themes using this.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_to_flag_posts site setting to flag_post_allowed_groups.
Note: In the original setting, "posts" is plural. I have changed this to "post" singular in the new setting to match others.
This change converts the min_trust_to_create_topic site setting to
create_topic_allowed_groups.
See: https://meta.discourse.org/t/283408
- Hides the old setting
- Adds the new site setting
- Add a deprecation warning
- Updates to use the new setting
- Adds a migration to fill in the new setting if the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates tests to account for the new change
- After a couple of months, we will remove the min_trust_to_create_topicsetting entirely.
Internal ref: /t/117248
This change converts the `approve_unless_trust_level` site setting to
`approve_unless_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Adds the new site setting
- Adds a deprecation warning
- Updates core to use the new settings.
- Adds a migration to fill in the new setting of the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates many tests to account for the new change
After a couple of months we will remove the `approve_unless_trust_level`
setting entirely.
Internal ref: /t/115696
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
Preloading just metadata is not always respected by browsers, and
sometimes the whole video will be downloaded. This switches to using a
placeholder image for the video and only loads the video when the play
button is clicked.
This method is a huge footgun in production, since it calls
the Redis KEYS command. From the Redis documentation at
https://redis.io/commands/keys/:
> Warning: consider KEYS as a command that should only be used in
production environments with extreme care. It may ruin performance when
it is executed against large databases. This command is intended for
debugging and special operations, such as changing your keyspace layout.
Don't use KEYS in your regular application code.
Since we were only using `delete_prefixed` in specs (now that we
removed the usage in production in 24ec06ff85)
we can remove this and instead rely on `use_redis_snapshotting` on the
particular tests that need this kind of clearing functionality.
Watched words were converted to regular expressions containing \W, which
handled only ASCII characters. Using [^[:word]] instead ensures that
UTF-8 characters are also handled correctly.
Currently, `Tag#topic_count` is a count of all regular topics regardless of whether the topic is in a read restricted category or not. As a result, any users can technically poll a sensitive tag to determine if a new topic is created in a category which the user has not excess to. We classify this as a minor leak in sensitive information.
The following changes are introduced in this commit:
1. Introduce `Tag#public_topic_count` which only count topics which have been tagged with a given tag in public categories.
2. Rename `Tag#topic_count` to `Tag#staff_topic_count` which counts the same way as `Tag#topic_count`. In other words, it counts all topics tagged with a given tag regardless of the category the topic is in. The rename is also done so that we indicate that this column contains sensitive information.
3. Change all previous spots which relied on `Topic#topic_count` to rely on `Tag.topic_column_count(guardian)` which will return the right "topic count" column to use based on the current scope.
4. Introduce `SiteSetting.include_secure_categories_in_tag_counts` site setting to allow site administrators to always display the tag topics count using `Tag#staff_topic_count` instead.
This fixes a longstanding issue for sites with the
secure_uploads setting enabled. What would happen is a scenario
like this, since we did not check all places an upload could be
linked to whenever we used UploadSecurity to check whether an
upload should be secure:
* Upload is created and used for site setting, set to secure: false
since site setting uploads should not be secure. Let's say favicon
* Favicon for the site is used inside a post in a private category,
e.g. via a Onebox
* We changed the secure status for the upload to true, since it's been
used in a private category and we don't check if it's originator
was a public place
* The site favicon breaks :'(
This was a source of constant consternation. Now, when an upload is _not_
being created, and we are checking if an existing upload should be
secure, we now check to see what the first record in the UploadReference
table is for that upload. If it's something public like a site setting,
then we will never change the upload to `secure`.
This patch introduces a cookies rotator as indicated in the Rails
upgrade guide. This allows to migrate from the old SHA1 digest to the
new SHA256 digest.
Adds stats for API and user API requests similar to regular page views.
This comes with a new report to visualize API requests per day like the
consolidated page views one.
cf. e62e93f83a
This PR also makes it so `bot` (negative ID) and `system` users are always allowed
to send PMs, since the old conditional was just based on `enable_personal_messages`
This commit introduces a new site setting: `block_hotlinked_media`. When enabled, all attempts to hotlink media (images, videos, and audio) will fail, and be replaced with a linked placeholder. Exceptions to the rule can be added via `block_hotlinked_media_exceptions`.
`download_remote_image_to_local` can be used alongside this feature. In that case, hotlinked images will be blocked immediately when the post is created, but will then be replaced with the downloaded version a few seconds later.
This implementation is purely server-side, and does not impact the composer preview.
Technically, there are two stages to this feature:
1. `PrettyText.sanitize_hotlinked_media` is called during `PrettyText.cook`, and whenever new images are introduced by Onebox. It will iterate over all src/srcset attributes in the post HTML and check if they're allowed. If not, the attributes will be removed and replaced with a `data-blocked-hotlinked-src(set)` attribute
2. In the `CookedPostProcessor`, we iterate over all `data-blocked-hotlinked-src(set)` attributes and check whether we have a downloaded version of the media. If yes, we update the src to use the downloaded version. If not, the entire media element is replaced with a placeholder. The placeholder is labelled 'external media', and is a link to the offsite media.
