The test was un-skipped in 6f25f17360 but
has since been flaky again. Removing the test completely as it has
resulted in more pain for us than the value the test provides.
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
This reverts one of the changes introduced just now in:
27d7b0c6de
I don't think we need this `activated_not_suspended_not_staged` scope
because we can just compose it ourselves via method chaining like
`User.activated.not_suspended.not_staged`.
This commit introduces a new site setting: `block_hotlinked_media`. When enabled, all attempts to hotlink media (images, videos, and audio) will fail, and be replaced with a linked placeholder. Exceptions to the rule can be added via `block_hotlinked_media_exceptions`.
`download_remote_image_to_local` can be used alongside this feature. In that case, hotlinked images will be blocked immediately when the post is created, but will then be replaced with the downloaded version a few seconds later.
This implementation is purely server-side, and does not impact the composer preview.
Technically, there are two stages to this feature:
1. `PrettyText.sanitize_hotlinked_media` is called during `PrettyText.cook`, and whenever new images are introduced by Onebox. It will iterate over all src/srcset attributes in the post HTML and check if they're allowed. If not, the attributes will be removed and replaced with a `data-blocked-hotlinked-src(set)` attribute
2. In the `CookedPostProcessor`, we iterate over all `data-blocked-hotlinked-src(set)` attributes and check whether we have a downloaded version of the media. If yes, we update the src to use the downloaded version. If not, the entire media element is replaced with a placeholder. The placeholder is labelled 'external media', and is a link to the offsite media.
If the select-kit header is not in the viewport (scrolled out of view), popper adds a data-popper-reference-hidden attribute.
This PR adds the recommended styles to "hide" the select-kit body when that happens. See
https://popper.js.org/docs/v2/modifiers/hide/
* FIX: Email Send post has already been taken error
Adding a failing test first before coming up with a good solution.
Related: 357011eb3b
The above commit changed
```
PostReplyKey.find_or_create_by_safe!
```
to
```
PostReplyKey.create_or_find_by!
```
But I don't think it is working as a 1-1 replacement because of the
`Validation failed: Post has already been taken` error we are receiving
with this change. Also we need to make sure we don't re-introduce any
concurrency issues.
Reported: https://meta.discourse.org/t/224706/13
* Remove rails unique constraint and rely on db index
I believe this is what is causing `create_or_find_by!` to fail. Because
we have a unique constraint in the db I think we can remove this rails
unique constraint?
* clean up spec wording
This commit resolves a bug where users are not auto approved based on
`SiteSetting.auto_approve_email_domains` when
`SiteSetting.must_approve_users` has been enabled.
When a site has `SiteSetting.invite_only` enabled, we create a
`ReviewableUser`record when activating a user if the user is not
approved. Therefore, we need to approve the user when redeeming an
invite.
There are some uncertainties surrounding why a `ReviewableRecord` is
created for a user in an invites only site but this commit does not seek
to address that.
Follow-up to 7c4e2d33fa
Twitter does not allow SVGs to be used for twitter:image
metadata (see https://developer.twitter.com/en/docs/twitter-for-websites/cards/overview/markup)
so we should fall back to the site logo if the image option
provided to `crawlable_meta_data` or SiteSetting.site_twitter_summary_large_image_url
is an SVG, and do not add the meta tag for twitter:image at all
if the site logo is an SVG.
Previously, draft get destroyed accidentally when we switch to PM with the below steps
1. Click “New Topic”
2. Type in the body
3. Switch to “New Message”
4. Click “cancel”
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The server-side implementation had unintentionally changed to include `-{id}` at the end of the body class name. This change meant that the JS client was unaware of the class, and didn't remove it when navigating away from the category page.
This commit fixes the server-side implementation to match the client
This commit seeks to only handle the `f=tracked` and `filter=tracked`
query params for a topic list. There are other "hidden" filters for a
topic list which can be activated by passing the right query param to
the request. However, they are hidden because there is no way to
activate those filters via the UI. We are handling the `f=tracked`
filter because we will soon be adding a link that allows a user to
quickly view their tracked topics.
Due to some changes we started notifying via push notifications on other
families of notifications. There are a total of about 30 or so possible
notification you could get, some can be pushed.
This fallback means that if for any reason we are unable to find an icon
for a push notification we just fallback to the Discourse logo.
Also go with a simple reply icon for watching first post.
Note, that in production `image_url` can return an exception if an image is
missing. This is not the case in test / development.
Previous to this fix, in production we were getting 500 errors from
bootstrap.json cause script_asset_path can not find plugin-tests
Opted for the simplest fix that is omitting the files in production
Previously we limited Discourse Connect provider to 1 secret per domain.
This made it pretty awkward to cycle secrets in environments where config
takes time to propagate
This change allows for the same domain to have multiple secrets
Also fixes internal implementation on DiscourseConnectProvider which was
not thread safe as it leaned on class variables to ferry data around
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: David Taylor <david@taylorhq.com>
* When loading topics in bulk, only trigger state change callbacks after
all the topics have been loaded and we determine that state has actually
changed.
* State change callbacks are also only triggered when state has changed.
The use of JSON.stringify might raise some performance concerns here as this is a
performance sensitive codepath. However, I measured the time for each
`_setState` function call locally, by wrapping the function call with
`performance.now()`, and did not see any significant overhead.
Since the default for the bookmark modal is to have no
reminder if you create a bookmark by clicking out of
the modal or pressing the Save button, this commit highlights
None by default.
Also changes the bookmark component to not use @on for Ember
lifecycle, we don't use that style
The commit fcc2e7ebbf to promote
polymorphic bookmarks did not correctly set the username for
the quick access bookmark menu based on the new serializer
values, so the username is not being shown in the bookmark
quick access menu. This commit fixes it, and also adds additional
tests for that menu and updates the user fixtures to reflect
the current state of the bookmarks endpoint.
Given this html:
```
<aside class="quote no-group">
<blockquote>
<aside class="quote no-group">
<blockquote>
<p dir="ltr">test</p>
</blockquote>
</aside>
<p dir="ltr">test2</p>
</blockquote>
</aside>
```
The result was an invalid markdown:
```
[quote]
[quote]
> test
> [/quote]
>
>
>
> test2
[/quote]
```
Now the result is:
```
[quote]
[quote]
test
[/quote]
test2
[/quote]
```
The bookmarkable_type instead of the bookmarkable_url
was being used for the link to the bookmark for the quick
access menu, leading to links like /ChatMessage. This
fixes the issue, follow up PR with tests for the quick
access menu to follow.
Looking up values from the `emojiStore` calls out to the browser's localStorage API and then decodes a JSON blob. This makes it relatively slow.
Previously we were doing this lookup in the emoji-picker's `init()` function, even if `isActive` was false. If many inactive emoji pickers are rendered simultaneously (e.g. for discourse-chat reactions), this performance hit quickly adds up.
This commit updates the service to notify about changes, and uses a computed property to provide a cached value in the emoji-picker.
Previously we hardcoded the DOWNLOAD_URL_EXPIRES_AFTER_SECONDS const
inside S3Helper to be 5 minutes (300 seconds). For various reasons,
some hosted sites may need this to be longer for other integrations.
The maximum expiry time for presigned URLs is 1 week (which is
604800 seconds), so that has been added as a validation on the
setting as well. The setting is hidden because 99% of the time
it should not be changed.
Censored watched words were not censored inside the title of an inline
oneboxes. Malicious users could exploit this behaviour to insert bad
words. The same issue has been fixed for regular Oneboxes in commit
d184fe59ca.
`run-qunit.js` does not expect QUnit tests to start automatically but
our wizard QUnit setup did not respect the `qunit_disable_auto_start`
URL param. Hence, tests would start running automatically and when a
subsequent `QUnit.start()` function call is made, we ended up getting a
`QUnit.start cannot be called inside a test context.` error.
This error can be consistently reproduced in the `discourse:discourse_test` container but not in
the local development environment. I do not know why and did not feel
like it is important at this point in time to know why.
There is no need for the extra protection on the client side if there is
a bug on the server side. In fact, we want the bug to be surfaced so
that it can be fixed on the server side.
Sometimes we need to render the icon as a call to action
to create a bookmark at which point the bookmark does
not yet exist, so we need to just show the normal bookmark
icon and a create title.
Also adds a CSS class for the bookmark existing and not existing
for styling.
This improves the bookmark-icon title to be more like the
post bookmark icons, to include the special formatted date
as well as the name of the bookmark.
When searching for PMs or PMs in a group inbox, results in the header search were not being limited to 5 with a "More" link to the full page search. This PR fixes that.
It also simplifies the logic and updates the search API docs to include recently added `in:messages` and `group_messages:groupname` options.
When saving / creating bookmarks, we have code to save
the user's preference of bookmark_auto_delete_preference
to their user_options.
Unfortunately this can cause weirdness when plugins
have code using BookmarkManager to set the auto delete preference for
only a specific bookmark.
This commit introduces a save_user_preferences option (false
by default) so that this user preference is not saved unless
specified by the consumer of BookmarkManager, so plugins will
not have to worry about it.
Previously, with the default `editing_grace_period`, hotlinked images were pulled 5 minutes after a post is created. This delay was added to reduce the chance of automated edits clashing with user edits.
This commit refactors things so that we can pull hotlinked images immediately. URLs are immediately updated in the post's `cooked` HTML. The post's raw markdown is updated later, after the `editing_grace_period`.
This involves a number of behind-the-scenes changes including:
- Schedule Jobs::PullHotlinkedImages immediately after Jobs::ProcessPost. Move scheduling to after the `update_column` call to avoid race conditions
- Move raw changes into a separate job, which is delayed until after the ninja-edit window
- Move disable_if_low_on_disk_space logic into the `pull_hotlinked_images` job
- Move raw-parsing/replacing logic into `InlineUpload` so it can be easily be shared between `UpdateHotlinkedRaw` and `PullUserProfileHotlinkedImages`
Previously this mapping of **cooked** images was only being run for oneboxes. Now it runs for all images, so we can transform hotlinked images without needing to immediately update `raw`
This component will be useful for chat, and also moves
the definition of the icon for with and without reminders
to the bookmark model as consts, so they can easily be
referenced in other places.
Incorporates learnings from /t/64227:
* Changes the code to set access control posts in the rake
task to be an efficient UPDATE SQL query.
The original version was timing out with 312017 post uploads,
the new query took ~3s to run.
* Changes the code to mark uploads as secure/not secure in
the rake task to be an efficient UPDATE SQL query rather than
using UploadSecurity. This took a very long time previously,
and now takes only a few seconds.
* Spread out ACL syncing for uploads into jobs with batches of
100 uploads at a time, so they can be parallelized instead
of having to wait ~1.25 seconds for each ACL to be changed
in S3 serially.
One issue that still remains is post rebaking. Doing this serially
is painfully slow. We have a way to do this in sidekiq via PeriodicalUpdates
but this is limited by max_old_rebakes_per_15_minutes. It would
be better to fan this rebaking out into jobs like we did for the
ACL sync, but that should be done in another PR.
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
Previously we were only applying the restriction to `a[href]` and `img[src]`. This commit ensures we apply the same logic to all allowlisted media src attributes.
Categories that had a CategoryUser record and the notification level
set to "Normal" were not selectable in any of the "Watched", "Tracked",
"Watching First Post" or "Muted" inputs. This happened because the
category seemed to be already selected in the "Normal" input, but that
does not exist (it is the default value if category is not present in
any of the other inputs).
This makes it easier to find PMs involving a particular user, for
example by searching for `in:messages thisUser` (previously, that query
would only return results in posts where `thisUser` was in the post body).
The composer is displayed over the bottom part of the page. To make sure
that no content is covered by the composer, a bottom padding is added
equal to the height of the composer. When the composer is opened or
closed that padding is added after around 300ms because of a debounce.
This commit makes sure that the padding is added as soon as the composer
state changes by using a CSS custom property (variable) and transition
property for a smooth user interface.
The title had to be added both on the 404 page generated by the server
side, displayed when the user reaches a bad page directly and the 404
page rendered by Ember when a user reaches a missing topic while
navigating the forum.
If userA has multiple tab/devices on the same topic, and:
1. userA likes a post in tab1
2. userB likes the same post
3. userA post like `acted` attr would desync in tab2
This fix handles this case and also the reverse one when removing likes
interleaved with other users acting on the same post.
Reported in Meta at https://meta.discourse.org/t/-/227239/3
- Only validate if custom_fields are loaded, so that we don't trigger a db query
- Only validate public user fields, not all custom_fields
This commit also reverts the unrelated spec changes in ba148e08, which were required to work around these issues
cf273ec6 removed ie11 as a target. A side effect is that this also removed support for Safari 12, which we will be maintaining support for until January 2023
https://meta.discourse.org/t/224747
While editing a reviewable's tags, the tag chooser did not show the tags
restricted to a specific category. This happened because the tag-chooser
did not pass the categoryId to the server while it was requesting the
list of tags the user can use.
The cache was causing state to leak between tests since the `WatchedWord` record in the DB would have been rolled back but `WordWatcher` still had the word in the cache.
The logic in 06893380 only works for `.js` files. It breaks down for `.br.js` and `.gz.js` files. This commit makes things more robust by extracting only the base_url from the service-worker JS, and taking the map filename from the original `sourceMappingURL` comment.
7a284164 previously switched the UserDestroyer to use find_each when iterating over UserHistory records. Unfortunately, since this logic is wrapped in a transaction, this didn't actually solve the memory usage problem. ActiveRecord maintains references to all modified models within a transaction.
This commit updates the logic to use a single SQL query, rather than updating models one-by-one
`script_asset_path('.../blah.js.map')` was appending `.js`, which would result in a filename like `.js.map.js`. It would also lose the `/assets` prefix, since the map files are not included in the sprockets manifest.
This commit updates the sourceMappingURL rewriting logic to calculate the service-worker's own JS url, and then append `.map`.
When we build and send emails using MessageBuilder and Email::Sender
we add custom headers defined in SiteSetting.email_custom_headers.
However this was causing errors in cases where the custom headers
defined a header that we already specify in outbound emails (e.g.
the Precedence: list header for topic/post emails).
This commit makes it so we always use the header value defined in Discourse
core if there is a duplicate, discarding the custom header value
from the site setting.
cf. https://meta.discourse.org/t/email-notifications-fail-if-duplicate-headers-exist/222960/14
These validate/after_create/after_destroy methods were added
back in b8828d4a2d before
the RegisteredBookmarkable API and pattern was nailed down.
This commit updates BookmarkManager to call out to the
relevant bookmarkable for these and bookmark_metadata for
consistency.
We have a .ics endpoint for user bookmarks, this
commit makes it so polymorphic bookmarks work on
that endpoint, using the serializer associated with
the RegisteredBookmarkable.
For some pages, when navigating to a topic and then pressing the Back
browser button to go back to the topic list, the scroll position was
not preserved and the user was taken to the beginning of the list.
This happened because the application failed to detect when the user
used the Back button and whether the topic list should be fetch from
the cache or not. The scroll position is preserved only for cached
topic lists.
Other improvements:
* Improve isPoppedState
* Reset position for topic-lists from user-activity page
* Remove usage of jQuery
* Make sure the scrollTo function has effect
Follow up to 618a1ba571.
Currently we don’t apply watched words to custom user fields nor user
profile fields.
This led to users being able to use blocked words in their bio, location
or some custom user fields.
This patch addresses this issue by adding some validations so it’s not
possible anymore to save the User model or the UserProfile model if they
contain blocked words.
This allows the category_id filter for the bookmark
report to work with polymorphic bookmarks. Honestly this
is a little hardcode-y at the moment but until we go and
make this report a lot more flexible with more filters
I don't think it's worth the work to add extra interfaces
to RegisteredBookmarkable and BaseBookmarkable to make
this more flexible. This is enough for now.
We have not used anything related to bookmarks for PostAction
or UserAction records since 2020, bookmarks are their own thing
now. Deleting all this is just cleaning up old cruft.
Latest redis interoduces a block form of multi / pipelined, this was incorrectly
passed through and not namespaced.
Fix also updates logster, we held off on upgrading it due to missing functions
This fixes a corner case of the perf optimization in d4e35f5.
When you have the the same post showing in multiple tab/devices and like
said post in one place, we updated the like count but didn't flip the
`acted` bool in the front-end. This caused a small visual desync.
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
The prioritize_username_in_ux site settings controls if the username or
name will be prioritized in the user interface. On the user directory
page the name was never displayed if the user and username were very
similar, being completely different from all the other places where the
username or name is displayed.
The scroll position was reset everytime the user pressed the back button
and returned to a user activity page. This fix applies only to pages
that uses the user-stream component. Pages with topic lists already had
this functionality implemented.
A bit of a mixed bag, this addresses several edge areas of bookmarks and makes them compatible with polymorphic bookmarks (hidden behind the `use_polymorphic_bookmarks` site setting). The main ones are:
* ExportUserArchive compatibility
* SyncTopicUserBookmarked job compatibility
* Sending different notifications for the bookmark reminders based on the bookmarkable type
* Import scripts compatibility
* BookmarkReminderNotificationHandler compatibility
This PR also refactors the `register_bookmarkable` API so it accepts a class descended from a `BaseBookmarkable` class instead. This was done because we kept having to add more and more lambdas/properties inline and it was very messy, so a factory pattern is cleaner. The classes can be tested independently as well.
Some later PRs will address some other areas like the discourse narrative bot, advanced search, reports, and the .ics endpoint for bookmarks.
We're adding this column now in preparation for a future commit(s) that will
redesign the avatar/notifications menu. The reason the column is added in a
separate commit is because the redesign changes are going to be complex with a
high risk of getting (temporarily) reverted and if they included a database
migration, they wouldn't revert cleanly/easily.
Internal ticket: t65045.
This bug was causing double events to be fired as :user_badge_granted is already called when a `user_badge` is created. More over the signature of the block in the UserBadge code is `badge_id, user_id` not `badge, user_id`.
For some reason, we're seeing inconsistency between production and
development environment where the computed width of #main-outlet-wrapper
is not taking the full width of the grid column in production.
Follow-up to b35cf7cc0c.
When a user views a topic that contains a topic timer to publish to a
restricted category, an error occurs on the client side because the user
does not have access to information about the category.
This commit fixes it such that the topic timer is not shown to the user
if the user does not have access to the category.
This was due to a server side bug when unicode usernames have been
enabled. We were double encoding the unicode username in the URL
resulting in a invalid URL.
On some installations, this would fail with 'index row size exceeds btree version 4 maximum'. This commit replaces the (post_id, url)` index with a `(post_id, md5(url))` index, which is much more space efficient.
This will make future changes to the 'pull hotlinked images' system easier. This commit should not introduce any functional change.
For now, the old post_custom_field data is kept in the database. This will be dropped in a future commit.
Note this commit also introduce a new {{d-popover}} component, example usage:
```hbs
{{#d-popover |state|}}
{{d-button label="foo.things" class="d-popover-trigger"}}
<div class="d-popover-content">
Some content
<div>
{{/d-popover}}
```
If you happen to mention someone with the wrong capitalization for that
person's username (e.g. `@sAm`), that incorrect capitalization would get
displayed on their user card.
This update will fix that by displaying the `user.username` value, which
will have the correct capitalization.
I also added some tests that will ensure `username` and `name` are
displayed on the user card in the correct order based on the
`prioritize_username_in_ux` setting.
This issue was reported here:
https://meta.discourse.org/t/capitalization-does-not-match-when-you-open-user-cards-using-mentions/217166
This commit introduces a new site setting: `use_name_for_username_suggestions` (default true)
Admins can disable it if they want to stop using Name values when generating usernames for users. This can be useful if you want to keep real names private-by-default or, when used in conjunction with the `use_email_for_username_and_name_suggestions` setting, you would prefer to use email-based username suggestions.
