Why this change?
When running system tests on our CI, we have been occasionally seeing
server errors like:
```
Error encountered while proccessing /stylesheets/desktop_e58cf7f686aab173f9b778797f241913c2833c39.css
NoMethodError: undefined method `+' for nil:NilClass
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/path/pattern.rb:139:in `[]'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:127:in `block (2 levels) in find_routes'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:126:in `each'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:126:in `each_with_index'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:126:in `block in find_routes'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:123:in `map!'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:123:in `find_routes'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:32:in `serve'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/routing/route_set.rb:852:in `call'
```
While looking through various Rails issues related to the error above, I
came across https://github.com/rails/rails/pull/27647 which is a fix to
fully initialize routes before the first request is handled. However,
the routes are only fully initialize only if `config.eager_load` is set
to `true`. There is no reason why `config.eager_load` shouldn't be `true` in the
CI environment and this is what a new Rails 7.1 app is generated with.
What does this change do?
Enable `config.eager_load` when `env["CI"]` is present
Why this change?
This is what `Capybara::Session#quit` does:
```
def quit
@driver.quit if @driver.respond_to? :quit
@document = @driver = nil
@touched = false
@server&.reset_error!
end
```
One notable thing is that it resets server errors which means that any
server errors encountered by a session is cleared. That is not what we
want since it hides errors even though `Capybara.raise_server_errors`
has been set to `true`.
This change converts the min_trust_to_create_topic site setting to
create_topic_allowed_groups.
See: https://meta.discourse.org/t/283408
- Hides the old setting
- Adds the new site setting
- Add a deprecation warning
- Updates to use the new setting
- Adds a migration to fill in the new setting if the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates tests to account for the new change
- After a couple of months, we will remove the min_trust_to_create_topicsetting entirely.
Internal ref: /t/117248
config.after(:suite) which stops minio server is called every time one
of the groups of parallel tests complete. This works fine most of the
time with parallel spec runs, but sometimes one of these
MinioRunner.stop calls happens while a spec is running in another
process that expects the minio server to be running.
Skipping these tests to avoid flakys for now.
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
This commit introduces a new feature that allows theme developers to manage the transformation of theme settings over time. Similar to Rails migrations, the theme settings migration system enables developers to write and execute migrations for theme settings, ensuring a smooth transition when changes are required in the format or structure of setting values.
Example use cases for the theme settings migration system:
1. Renaming a theme setting.
2. Changing the data type of a theme setting (e.g., transforming a string setting containing comma-separated values into a proper list setting).
3. Altering the format of data stored in a theme setting.
All of these use cases and more are now possible while preserving theme setting values for sites that have already modified their theme settings.
Usage:
1. Create a top-level directory called `migrations` in your theme/component, and then within the `migrations` directory create another directory called `settings`.
2. Inside the `migrations/settings` directory, create a JavaScript file using the format `XXXX-some-name.js`, where `XXXX` is a unique 4-digit number, and `some-name` is a descriptor of your choice that describes the migration.
3. Within the JavaScript file, define and export (as the default) a function called `migrate`. This function will receive a `Map` object and must also return a `Map` object (it's acceptable to return the same `Map` object that the function received).
4. The `Map` object received by the `migrate` function will include settings that have been overridden or changed by site administrators. Settings that have never been changed from the default will not be included.
5. The keys and values contained in the `Map` object that the `migrate` function returns will replace all the currently changed settings of the theme.
6. Migrations are executed in numerical order based on the XXXX segment in the migration filenames. For instance, `0001-some-migration.js` will be executed before `0002-another-migration.js`.
Here's a complete example migration script that renames a setting from `setting_with_old_name` to `setting_with_new_name`:
```js
// File name: 0001-rename-setting.js
export default function migrate(settings) {
if (settings.has("setting_with_old_name")) {
settings.set("setting_with_new_name", settings.get("setting_with_old_name"));
}
return settings;
}
```
Internal topic: t/109980
This fixes a similar issue to 8b3eca0 where an Errno::ETXTBSY error was raised because the minio_runner gem was trying to install the binary across multiple processes in rspec. If we just make sure the latest version is installed before the tests run, this shouldn't happen, since MinioRunner.start will not do any further attempts at installation if the latest version is installed.
We have a custom implementation of #symbolize_keys in our Onebox helpers. This is likely a legacy from when Onebox was a standalone gem. This change replaces all usages with either #deep_symbolize_keys from ActiveSupport, or appropriate option to the JSON parser gem used.
Why this change?
Back in May 17 2023 along with the release of Discourse 3.1, we announced
on meta that the legacy hamburger dropdown navigation menu is
deprecated and will be dropped in Discourse 3.2. This is the link to the announcement
on meta: https://meta.discourse.org/t/removing-the-legacy-hamburger-navigation-menu-option/265274
## What does this change do?
This change removes the `legacy` option from the `navigation_menu` site
setting and migrates existing sites on the `legacy` option to the
`header dropdown` option.
All references to the `legacy` option in code and tests have been
removed as well.
This is part 1 of 3, split up of PR #23529. This PR refactors the
webauthn code to support passkey authentication/registration.
Passkeys aren't used yet, that is coming in PRs 2 and 3.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
What does this change do?
This change improves the `upload_theme` system test helper method by
automatically setting the uploaded theme as the default theme for the
site. This is to make it easier for users to use the theme instead of
having to fiddle with theme previews. The default behaviour of setting
the uploaded theme as the site's default theme can be disabled by
passing `false` to the `set_theme_as_default` keyword argument.
This change also introduces a new `upload_theme_component` system test
helper method for uploading theme components. The difference between the
`upload_theme` helper method is that the theme component is
automatically added to the site's default theme when uploaded. The theme
which the theme component is added to can be configured via the
`parent_theme_id` keyword argument.
For both methods, we also no longer require the path to the theme to be
provided. Instead both methods will look through the callstack and can
figure out the theme's directory based on the convention that the
theme's system tests are placed in the `spec/system` directory of the
theme folder. This change simplifies the usage of the methods for users
and helps to remove code like `upload_theme_component(File.expand_path("../..", __dir__))`.
Previous to this change when both `normalize_emails` and `hide_email_address_taken`
is enabled the expected `account_exists` email was only sent on exact email
matches.
This expands it so it also sends an email to the canonical email owner.
Why this change?
Currently, we do not have an easy way to test themes and theme components
using Rails system tests. While we support QUnit acceptance tests for
themes and theme components, QUnit acceptance tests stubs out the server
and setting up the fixtures for server responses is difficult and can lead to a
frustrating experience. System tests on the other hand allow authors to
set up the test fixtures using our fabricator system which is much
easier to use.
What does this change do?
In order for us to allow authors to run system tests with their themes
installed, we are adding a `upload_theme` helper that is made available
when writing system tests. The `upload_theme` helper requires a single
`directory` parameter where `directory` is the directory of the theme
locally and returns a `Theme` record.
Doing this because the same issue exists as did for chromedriver
fixed by TGX in X for minio. Need time to add support for parallel
tests in the minio_runner gem so this doesn't happen:
```
Failure/Error:
File.open(dest, "wb", s.stat.mode) do |f|
IO.copy_stream(s, f)
f.chmod(f.lstat.mode)
end
Errno::ETXTBSY:
Text file busy @ rb_sysopen - /github/home/.minio_runner/minio
./lib/freedom_patches/copy_file.rb:10:in `copy_file'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:49:in `block in download_binary'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/network.rb:72:in `download'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:48:in `download_binary'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:29:in `install'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:9:in `install'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner.rb:62:in `install_binaries'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner.rb:50:in `start'
./spec/support/system_helpers.rb:157:in `setup_s3_system_test'
```
This adds a new secure_uploads_pm_only site setting. When secure_uploads
is true with this setting, only uploads created in PMs will be marked
secure; no uploads in secure categories will be marked as secure, and
the login_required site setting has no bearing on upload security
either.
This is meant to be a stopgap solution to prevent secure uploads
in a single place (private messages) for sensitive admin data exports.
Ideally we would want a more comprehensive way of saying that certain
upload types get secured which is a hybrid/mixed mode secure uploads,
but for now this will do the trick.
They're both constant per-instance values, there is no need to store them
in the session. This also makes the code a bit more readable by moving
the `session_challenge_key` method up to the `DiscourseWebauthn` module.
This commit adds some system specs to test uploads with
direct to S3 single and multipart uploads via uppy. This
is done with minio as a local S3 replacement. We are doing
this to catch regressions when uppy dependencies need to
be upgraded or we change uppy upload code, since before
this there was no way to know outside manual testing whether
these changes would cause regressions.
Minio's server lifecycle and the installed binaries are managed
by the https://github.com/discourse/minio_runner gem, though the
binaries are already installed on the discourse_test image we run
GitHub CI from.
These tests will only run in CI unless you specifically use the
CI=1 or RUN_S3_SYSTEM_SPECS=1 env vars.
For a history of experimentation here see https://github.com/discourse/discourse/pull/22381
Related PRs:
* https://github.com/discourse/minio_runner/pull/1
* https://github.com/discourse/minio_runner/pull/2
* https://github.com/discourse/minio_runner/pull/3
When we receive the stream parameter, we'll queue a job that periodically publishes partial updates, and after the summarization finishes, a final one with the completed version, plus metadata.
`summary-box` listens to these updates via MessageBus, and updates state accordingly.
Context of this change:
There are two site settings which an admin can configured to set the
default categories and tags that are shown for a new user. `default_navigation_menu_categories`
is used to determine the default categories while
`default_navigation_menu_tags` is used to determine the default tags.
Prior to this change when seeding the defaults, we will filter out the
categories/tags that the user do not have permission to see. However,
this means that when the user does eventually gain permission down the
line, the default categories and tags do not appear.
What does this change do?
With this commit, we have changed it such that all the categories and tags
configured in the `default_navigation_menu_categories` and
`default_navigation_menu_tags` site settings are seeded regardless of
whether the user's visibility of the categories or tags. During
serialization, we will then filter out the categories and tags which the
user does not have visibility of.
Why this change?
We were verifying that a url for a section link in a custom sidebar
section is valid by passing the url string to `Router#recognize`.
If a `rootURL` has been set on the router, the url string that is passed
to `Router#recognize` has to start with the `rootURL`.
This commit fixes the problem by ensuring that `RouteInfoHelper` adds
the application subfolder path before calling `Router#recognize` on the
url string.
Why this change?
We're already displaying a category's description as the title attribute
on the category section link. We should do the same for tags as well.
We need a nice way to only return some hashtag data
sources based on various site settings. This commit
adds an enabled? method that every hashtag data source
must implement. If this returns false the data source
will not be used at all for hashtag lookups or search.
This introduces a PLATFORM_KEY_MODIFIER const that
can be used both client and server side, to determine
whether we should be using the Meta or Ctrl key based
on whether the user is on Windows/Linux or Mac.
Updates the interface for implementing summarization strategies and adds a cache layer to summarize topics once.
The cache stores the final summary and each chunk used to build it, which will be useful when we have to extend or rebuild it.
This PR splits up the preference that controls the count vs dot and destination of sidebar links, which is really hard to understand, into 2 simpler checkboxes:
The new preferences/checkboxes are off by default, but there are database migrations to switch the old preference to the new ones so that existing users don't have to update their preferences to keep their preferred behavior of sidebar links when this changed is rolled out.
Internal topic: t/103529.
We use it like this:
expect(message.created_at).to eq_time(created_at)
The problem is that if one of the values or both of them are `nil` the matcher fails
with this error:
NoMethodError: undefined method `-' for nil:NilClass
This commit adds support for `nil` values. If both time values are `nil` they are equal,
if only one value is `nil` they aren't.
https://meta.discourse.org/t/markdown-preview-and-result-differ/263878
The result of this markdown had different results in the composer preview and the post. This is solved by updating Loofah to the latest version and using html5 fragments like our user had reported. While the change was only needed in cooked_post_processor.rb for this fix, other areas also had to be updated due to various side effects.
Different environments run on different hardware so response times vary
based on hardware. Instead of hardcoding the timeout for
`SystemHelpers#try_until_success` to 2 seconds, we change it such that
it follows `Capybara.default_wait_timeout` which we have configured to
be higher in environments which runs on lousier hardware.
This change should reduce the amount of flakiness we're seeing on CI
with tests that rely on `SystemHlpers#try_until_success`.
* FEATURE: Content custom summarization strategies.
This PR establishes a pattern for plugins to register alternative ways of summarizing content by extending a class that defines an interface.
Core controls which strategy we'll use and who has access to it through the `summarization_strategy` and `custom_summarization_allowed_groups`. It also defines the UI for summarizing topics.
Other plugins can access this summarization mechanism and implement their features, removing cross-plugin customizations, as it currently happens between chat and the discourse-ai plugin.
* Group membership validation and rate limiting
* Work with objects instead of classes
* Port summarization feature from discourse-ai to chat
* Rename available summaries to 'Top Replies' and 'Summary'
This patch sets some limits on custom fields:
- an entity can’t have more than 100 custom fields defined on it
- a custom field can’t hold a value greater than 10,000,000 characters
The current implementation of custom fields is relatively complex and
does an upsert in SQL at some point, thus preventing to simply add an
`ActiveRecord` validation on the custom field model without having to
rewrite a part of the existing logic.
That’s one of the reasons this patch is implementing validations in the
`HasCustomField` module adding them to the model including the module.
Clicking on TOC heading anchors in a subfolder setup was breaking the current URL for users.
Other than the fix this change introduces the ability to test the subfolder setup in system specs.
Why is this change required?
We had a system test failed right after visiting a URL because an
element that was supposed to be on screen isn't. In the screenshot
captured, the app was still stuck on the splash screen. We're not sure
if this has been causing flakiness in our system tests but there is no
good reason to enable splash screen which adds some overhead to each
page load.
What is the problem?
In the test environement, we were calling `SiteSetting.setting` directly
to introduce new site settings. However, this leads to changes in state of the SiteSettings
hash that is stored in memory as test runs. Changing or leaking states
when running tests is one of the major contributors of test flakiness.
An example of how this resulted in test flakiness is our `spec/integrity/i18n_spec.rb` spec file which
had a test case that would fail because a new "plugin_setting" site
setting was registered in another test case but the site setting did not
have translations for the site setting set.
What is the fix?
There are a couple of changes being introduced in this commit:
1. Make `SiteSetting.setting` a private method as it is not safe to be
exposed as a public method of the `SiteSetting` class
2. Change test cases to use existing site settings in Discourse instead
of creating custom site settings. Existing site settings are not
removed often so we don't really need to dynamically add new site
settings in test cases. Even if the site settings being used in test
cases are removed, updating the test cases to rely on other site
settings is a very easy change.
3. Set up a plugin instance in the test environment as a "fixture"
instead of having each test create its own plugin instance.
- Improves styleguide support
- Adds toggle color scheme to styleguide
- Adds properties mutators to styleguide
- Attempts to quit a session as soon as done with it in system specs, this should at least free resources faster
- Refactors fabricators to simplify them
- Adds more fabricators (uploads for example)
- Starts implementing components pattern in system specs
- Uses Chat::Message creator to create messages in system specs, this should help to have more real specs as the side effects should now happen
SearchIndexer is only automatically disabled in `before_all` and `before` blocks which means at the start
of test runs. Enabling the SearchIndexer in one `fab!` block will affect
all other `fab!` blocks which is not ideal as we may be indexing stuff
for search when we don't need to.
Currently, some links aren’t properly built in Discobot when Discourse
is hosted in a subfolder. This is because we’re providing
`Discourse.base_url` to the Rails helpers which contains the base URL
*with* the prefix. But Rails helpers already handle this prefix so the
resulting link gets the prefix twice.
The fix is quite simple: use `Discourse.base_url_no_prefix` instead of
`Discourse.base_url`.
This is used when calling click_message_action_mobile to wait
for the message actions menu to finish animating up before
attempting to click on it using capybara. Without this, in
the time between capybara getting the x,y position of a menu
item to click on and the click being fired, the animating menu
can move that item out of the way.
With the new helper, we constantly compare x,y client rect positions
for the animating element and wait for them to stabilise. Once they
do, it means the animation is done, and it is safe to click on
anything within the element.
Re-enables mobile system specs for chat that were ignored because
of this.
