This PR changes the rescue block to rescue only Net::TimeoutError exceptions and removes the log line to prevent clutter the logs with errors that are ignored. Other errors can bubble up because they're errors we probably want to know about
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
Following the Rails 7 upgrade, the `DISCOURSE_SMTP_ENABLE_START_TLS`
setting doesn’t work anymore. This is because Rails upgraded the
`net-smtp` gem to the 0.3.1 version which enables `starttls` by default.
The `mail` gem doesn’t support this new behavior yet and doesn’t know
how to disable TLS. This should be fixed in an upcoming release.
Meanwhile applying this patch allows us to get back the previous
behavior which is expected by many.
This commit introduces a new site setting: `block_hotlinked_media`. When enabled, all attempts to hotlink media (images, videos, and audio) will fail, and be replaced with a linked placeholder. Exceptions to the rule can be added via `block_hotlinked_media_exceptions`.
`download_remote_image_to_local` can be used alongside this feature. In that case, hotlinked images will be blocked immediately when the post is created, but will then be replaced with the downloaded version a few seconds later.
This implementation is purely server-side, and does not impact the composer preview.
Technically, there are two stages to this feature:
1. `PrettyText.sanitize_hotlinked_media` is called during `PrettyText.cook`, and whenever new images are introduced by Onebox. It will iterate over all src/srcset attributes in the post HTML and check if they're allowed. If not, the attributes will be removed and replaced with a `data-blocked-hotlinked-src(set)` attribute
2. In the `CookedPostProcessor`, we iterate over all `data-blocked-hotlinked-src(set)` attributes and check whether we have a downloaded version of the media. If yes, we update the src to use the downloaded version. If not, the entire media element is replaced with a placeholder. The placeholder is labelled 'external media', and is a link to the offsite media.
* FIX: Email Send post has already been taken error
Adding a failing test first before coming up with a good solution.
Related: 357011eb3b
The above commit changed
```
PostReplyKey.find_or_create_by_safe!
```
to
```
PostReplyKey.create_or_find_by!
```
But I don't think it is working as a 1-1 replacement because of the
`Validation failed: Post has already been taken` error we are receiving
with this change. Also we need to make sure we don't re-introduce any
concurrency issues.
Reported: https://meta.discourse.org/t/224706/13
* Remove rails unique constraint and rely on db index
I believe this is what is causing `create_or_find_by!` to fail. Because
we have a unique constraint in the db I think we can remove this rails
unique constraint?
* clean up spec wording
This commit resolves a bug where users are not auto approved based on
`SiteSetting.auto_approve_email_domains` when
`SiteSetting.must_approve_users` has been enabled.
When a site has `SiteSetting.invite_only` enabled, we create a
`ReviewableUser`record when activating a user if the user is not
approved. Therefore, we need to approve the user when redeeming an
invite.
There are some uncertainties surrounding why a `ReviewableRecord` is
created for a user in an invites only site but this commit does not seek
to address that.
Follow-up to 7c4e2d33fa
Twitter does not allow SVGs to be used for twitter:image
metadata (see https://developer.twitter.com/en/docs/twitter-for-websites/cards/overview/markup)
so we should fall back to the site logo if the image option
provided to `crawlable_meta_data` or SiteSetting.site_twitter_summary_large_image_url
is an SVG, and do not add the meta tag for twitter:image at all
if the site logo is an SVG.
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The server-side implementation had unintentionally changed to include `-{id}` at the end of the body class name. This change meant that the JS client was unaware of the class, and didn't remove it when navigating away from the category page.
This commit fixes the server-side implementation to match the client
Due to some changes we started notifying via push notifications on other
families of notifications. There are a total of about 30 or so possible
notification you could get, some can be pushed.
This fallback means that if for any reason we are unable to find an icon
for a push notification we just fallback to the Discourse logo.
Also go with a simple reply icon for watching first post.
Note, that in production `image_url` can return an exception if an image is
missing. This is not the case in test / development.
Previously we limited Discourse Connect provider to 1 secret per domain.
This made it pretty awkward to cycle secrets in environments where config
takes time to propagate
This change allows for the same domain to have multiple secrets
Also fixes internal implementation on DiscourseConnectProvider which was
not thread safe as it leaned on class variables to ferry data around
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: David Taylor <david@taylorhq.com>
In 7328a2bfb0 we changed the
InlineOneboxer#onebox_for method to run the title of the
onebox through WatchedWord#censor_text. However, it is
allowable for the title to be nil, which was causing this
error in production:
> NoMethodError : undefined method gsub for nil:NilClass
We just need to check whether the title is nil before trying
to censor it.
Previously we hardcoded the DOWNLOAD_URL_EXPIRES_AFTER_SECONDS const
inside S3Helper to be 5 minutes (300 seconds). For various reasons,
some hosted sites may need this to be longer for other integrations.
The maximum expiry time for presigned URLs is 1 week (which is
604800 seconds), so that has been added as a validation on the
setting as well. The setting is hidden because 99% of the time
it should not be changed.
Censored watched words were not censored inside the title of an inline
oneboxes. Malicious users could exploit this behaviour to insert bad
words. The same issue has been fixed for regular Oneboxes in commit
d184fe59ca.
When searching for PMs or PMs in a group inbox, results in the header search were not being limited to 5 with a "More" link to the full page search. This PR fixes that.
It also simplifies the logic and updates the search API docs to include recently added `in:messages` and `group_messages:groupname` options.
When saving / creating bookmarks, we have code to save
the user's preference of bookmark_auto_delete_preference
to their user_options.
Unfortunately this can cause weirdness when plugins
have code using BookmarkManager to set the auto delete preference for
only a specific bookmark.
This commit introduces a save_user_preferences option (false
by default) so that this user preference is not saved unless
specified by the consumer of BookmarkManager, so plugins will
not have to worry about it.
Previously, with the default `editing_grace_period`, hotlinked images were pulled 5 minutes after a post is created. This delay was added to reduce the chance of automated edits clashing with user edits.
This commit refactors things so that we can pull hotlinked images immediately. URLs are immediately updated in the post's `cooked` HTML. The post's raw markdown is updated later, after the `editing_grace_period`.
This involves a number of behind-the-scenes changes including:
- Schedule Jobs::PullHotlinkedImages immediately after Jobs::ProcessPost. Move scheduling to after the `update_column` call to avoid race conditions
- Move raw changes into a separate job, which is delayed until after the ninja-edit window
- Move disable_if_low_on_disk_space logic into the `pull_hotlinked_images` job
- Move raw-parsing/replacing logic into `InlineUpload` so it can be easily be shared between `UpdateHotlinkedRaw` and `PullUserProfileHotlinkedImages`
Meta topic: https://meta.discourse.org/t/prevent-to-linkify-when-there-is-a-redirect/226964/2?u=osama.
This commit adds a new site setting `block_onebox_on_redirect` (default off) for blocking oneboxes (full and inline) of URLs that redirect. Note that an initial http → https redirect is still allowed if the redirect location is identical to the source (minus the scheme of course). For example, if a user includes a link to `http://example.com/page` and the link resolves to `https://example.com/page`, then the link will onebox (assuming it can be oneboxed) even if the setting is enabled. The reason for this is a user may type out a URL (i.e. the URL is short and memorizable) with http and since a lot of sites support TLS with http traffic automatically redirected to https, so we should still allow the URL to onebox.
Incorporates learnings from /t/64227:
* Changes the code to set access control posts in the rake
task to be an efficient UPDATE SQL query.
The original version was timing out with 312017 post uploads,
the new query took ~3s to run.
* Changes the code to mark uploads as secure/not secure in
the rake task to be an efficient UPDATE SQL query rather than
using UploadSecurity. This took a very long time previously,
and now takes only a few seconds.
* Spread out ACL syncing for uploads into jobs with batches of
100 uploads at a time, so they can be parallelized instead
of having to wait ~1.25 seconds for each ACL to be changed
in S3 serially.
One issue that still remains is post rebaking. Doing this serially
is painfully slow. We have a way to do this in sidekiq via PeriodicalUpdates
but this is limited by max_old_rebakes_per_15_minutes. It would
be better to fan this rebaking out into jobs like we did for the
ACL sync, but that should be done in another PR.
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
Previously we were only applying the restriction to `a[href]` and `img[src]`. This commit ensures we apply the same logic to all allowlisted media src attributes.
Alan Guo Xiang Tan
Sérgio Saquetim
Isaac Janzen
Bianca Nenciu
Blake Erickson
David Taylor
Loïc Guitaut
Mayfield
Jarek Radosz
M.K. Safi
Martin Brennan
Gerhard SchlagerandAlan Guo Xiang Tan
Johannes Faigle
Sam
Jean
Andrei Prigorshnev
Penar Musaraj
Osama Sayegh