Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Fixes a rare race condition causing the `Imap::Sync` class to create an incoming email and associated post/topic, which then kicks off the PostAlerter to notify others in the PM about a reply in the topic, but for the OP which is not necessary (because the person emailing the IMAP inbox already knows about the OP). Basically, we should never be sending the group SMTP email for the first post in a topic.
Also in this PR:
* Custom attribute accessors for the to/from/cc addresses on `IncomingEmail`, to parse them from an array to a joined string so the logic for this is only in one place.
* Store extra detail against the `IncomingEmail` created in `GroupSmtpMailer`
* regex test Mail header Reply-To as string instead of Field, which fixes `warning: deprecated Object#=~ is called on Mail::Field; it always returns nil`
* Add DEBUG_IMAP to log all IMAP logs as warnings for easier debugging
* Changed the Rails logging to `ImapSyncLog` in the `GroupSmtpMailer`
When calculating whether the attached uploads went over the SiteSetting.email_total_attachment_size_limit_kb.kilobytes limit, we were using the original_upload for the calculation instead of the actually attached_upload, which will be smaller in most cases because it can be an optimized image.
See #10794 for original context.
I did not mean to add invite to the BYPASS_TYPES for Email::Sender, it was supposed to be invite_password_instructions.
A site owner attempting to use both the email_subject site setting and translation overrides for normal post notification
email subjects would find themselves frusturated at the lack of template argument parity.
Make all the variables available for translation overrides by adding the subject variables to the custom interpolation keys list and applying them.
Reported at https://meta.discourse.org/t/customize-subject-format-for-standard-emails/20801/47?u=riking
We had an issue where onebox thumbnail was too large and thus was optimized, and we are using the image URLs in post to redact and re-embed, based on the sha1 in the URL. Optimized image URLs have extra stuff on the end like _99x99 so we were not parsing out the sha1 correctly. Another issue I found was for posts that have giant images, the original was being used to embed in the email and thus would basically never get included because it is huge.
For example the URL 787b17ea61_2_690x335.jpeg was not parsed correctly; we would end up with 787b17ea6140f4f022eb7f1509a692f2873cfe35_2_690x335.jpeg as the sha1 which would not find the image to re-embed that was already attached to the email.
This fix will use the first optimized image of the detected upload when we are redacting and then re-embedding to make sure we are not sending giant things in email. Also, I detect if it is a onebox thumbnail or the site icon and force appropriate sizes and styles.
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
`max-width: 50%; max-height: 400px;` is a good fallback, however, if width and height are given and are smaller than fallback - we should persist that smaller size.
Our Email::Sender class accepts an optional user argument, which is used to create a PostReplyKey record when present. This record is used to sub out the %{reply_key} placeholder in the Reply-To mail header, so if we do not pass in the user we get a broken Reply-To header.
This is especially problematic in the IMAP group SMTP situation, because these emails go to customers that we are replying to, and when they reply to us the email bounces! This fixes the issue by passing user to the Email::Sender when sending a group_smtp email but there is still more to do in another PR.
This Email::Sender optional user is a bit of a footgun IMO, especially because most of the time we use it there is a user we can source. I would like to do another PR for this after this one to make the parameter not optional, so we don't end up with these reply issues down the line again.
This was made adjustable to allow rolling back quickly if problems came
up. The new behaviour was made default in 93137066 and no problems with
this have been reported.
See https://meta.discourse.org/t/email-address-change-confirmation-email-not-sent-but-every-other-notification-emails-are/165358
In short: with disable emails set to non-staff, email address change confirmation emails (those sent to the new address) are not sent for staff or admin members.
This was happening because we were looking up the staff user with the to_address of the email, but the to address was the new email address because we are sending a confirm email change email, and thus the user could not be found. We didn't need to do this anyway because we are passing the user into the Email::Sender class anyway.
This PR introduces a few important changes to secure media redaction in emails. First of all, two new site settings have been introduced:
* `secure_media_allow_embed_images_in_emails`: If enabled we will embed secure images in emails instead of redacting them.
* `secure_media_max_email_embed_image_size_kb`: The cap to the size of the secure image we will embed, defaulting to 1mb, so the email does not become too big. Max is 10mb. Works in tandem with `email_total_attachment_size_limit_kb`.
`Email::Sender` will now attach images to the email based on these settings. The sender will also call `inline_secure_images` in `Email::Styles` after secure media is redacted and attachments are added to replace redaction messages with attached images. I went with attachment and `cid` URLs because base64 image support is _still_ flaky in email clients.
All redaction of secure media is now handled in `Email::Styles` and calls out to `PrettyText.strip_secure_media` to do the actual stripping and replacing with placeholders. `app/mailers/group_smtp_mailer.rb` and `app/mailers/user_notifications.rb` no longer do any stripping because they are earlier in the pipeline than `Email::Styles`.
Finally the redaction notice has been restyled and includes a link to the media that the user can click, which will show it to them if they have the necessary permissions.
Adds functionality to reflect topic delete in Discourse to IMAP inbox (Gmail only for now) and reflecting Gmail deletes in Discourse.
Adding lots of tests, various refactors and code improvements.
When Discourse topic is destroyed in PostDestroyer mark the topic incoming email as imap_sync: true, and do the opposite when post is recovered.
Adds a imap_group_id column to IncomingEmail to deal with an issue where we were trying to update emails in the mailbox, calling IncomingEmail.where(imap_sync: true). However UID and UIDVALIDITY could be the same across accounts. So if group A used IMAP details for Gmail account A, and group B used IMAP details for Gmail account B, and both tried to sync changes to an email with UID of 3 (e.g. changing Labels), one account could affect the other. This even applied to Archiving!
Also in this PR:
* Fix error occurring if we do a uid_fetch and no emails are returned
* Allow for creating labels within the target mailbox (previously we would not do this, only use existing labels)
* Improve consistency for log messages
* Add specs for generic IMAP provider (Gmail specs still to come)
* Add custom archiving support for Gmail
* Only use Message-ID for uniqueness of IncomingEmail if it was generated by us
* Various refactors and improvements
`Nokogiri::HTML.fragment` is a huge hack (a comment in the source code
admits this). The current behavior of `Email::Styles` is to try to
emulate `fragment` using nokogumbo, but it misses some edge cases. In
particular, meta tags in a email template don't make it through to the
final email.
Instead of treating the provided HTML as an indeterminate fragment, this
commit makes `Email::Styles` treat the HTML as a complete document. This
means that the generated HTML for an email will now always contain top
level structure (a doctype, html, head and body tags).
This new behavior is behind a hidden site setting for now and defaults
off.
We have the `# frozen_string_literal: true` comment on all our
files. This means all string literals are frozen. There is no need
to call #freeze on any literals.
For files with `# frozen_string_literal: true`
```
puts %w{a b}[0].frozen?
=> true
puts "hi".frozen?
=> true
puts "a #{1} b".frozen?
=> true
puts ("a " + "b").frozen?
=> false
puts (-("a " + "b")).frozen?
=> true
```
For more details see: https://samsaffron.com/archive/2018/02/16/reducing-string-duplication-in-ruby
Two behaviors in the mail gem collide:
1. Attachments are added as extra parts at the top level,
2. When there are both text and html parts, the content type is set to
'multipart/alternative'.
Since attachments aren't alternative renderings, for emails that contain
attachments and both html and text parts, some coercing is necessary.
For example /t/ URLs were being replaced if they contained secure-media-uploads so if you made a topic called "Secure Media Uploads Are Cool" the View Topic link in the user notifications would be stripped out.
Refactored code so this secure URL detection happens in one place.
When pull_hotlinked_images tried to run on posts with secure media (which had already been downloaded from external sources) we were getting a 404 when trying to download the image because the secure endpoint doesn't allow anon downloads.
Also, we were getting into an infinite loop of pull_hotlinked_images because the job didn't consider the secure media URLs as "downloaded" already so it kept trying to download them over and over.
In this PR I have also refactored secure-media-upload URL checks and mutations into single source of truth in Upload, adding a SECURE_MEDIA_ROUTE constant to check URLs against too.
* enqueue spam/dmarc failing emails instead of hiding
* add translations for dmarc/spam enqueued reasons
* unescape quote
* if email_in_authserv_id is blank return gray for all emails
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
