The category drop was rerendered after every category async change
because it updated the categories list. This is not necessary and
categories can be referenced indirectly by ID instead.
This value is included when generating static asset URLs. Updating the value will allow site operators to invalidate all asset urls to recover from configuration issues which may have been cached by CDNs/browsers.
When sending SMTP for group SMTP functionality, we
are running into timeouts for both read and open
when sending mail occassionally, which can cause issues
like the email only being sent to _some_ of the recipients
or to fail altogether.
The defaults of 5s are too low, so bumping them up to
the defaults of the `net-smtp` gem.
If a group is < 5 members, the mention warning doesn't need to
be so harsh. This commit changes the copy for the existing warning
and adds a new one for groups that are >= 5 members.
Reverts
- DEV: maxmind license checking failing tests #24534
- UX: Show if MaxMind key is missing on IP lookup #18993
These changes are leading to surprising results, our logs are now filling up with warnings on dev environments
We need the change to be redone
This improves the implementation of #18993
1. Error message displayed to user is clearer
2. open_db will also be called, even if license key is blank, as it was previously
3. This in turn means no need to keep stubbing 'maxmind_license_key'
This change converts the `email_in_min_trust` site setting to
`email_in_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Hides the old setting
- Adds the new site setting
- Add a deprecation warning
- Updates to use the new setting
- Adds a migration to fill in the new setting if the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates tests to account for the new change
After a couple of months we will remove the
`email_in_min_trust` setting entirely.
Internal ref: /t/115696
* DEV: Convert approve_new_topics_unless_trust_level to groups
This change converts the `approve_new_topics_unless_trust_level` site
setting to `approve_new_topics_unless_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Hides the old setting
- Adds the new site setting
- Add a deprecation warning
- Updates to use the new setting
- Adds a migration to fill in the new setting if the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates tests to account for the new change
After a couple of months we will remove the
`approve_new_topics_unless_trust_level` setting entirely.
Internal ref: /t/115696
* add missing translation
* Add keyword entry
* Add migration
This change converts the `approve_unless_trust_level` site setting to
`approve_unless_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Adds the new site setting
- Adds a deprecation warning
- Updates core to use the new settings.
- Adds a migration to fill in the new setting of the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates many tests to account for the new change
After a couple of months we will remove the `approve_unless_trust_level`
setting entirely.
Internal ref: /t/115696
* Remove checkmark for official plugins
* Add author for plugin, which is By Discourse for all discourse
and discourse-org github plugins
* Link to meta topic instead of github repo
* Add experimental flag for plugin metadata and show this as a
badge on the plugin list if present
---------
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
This commit makes it so the fullscreen code modal grows
to fit its content, and doesn't show horizontal scrollbars
unless the entire screen is filled by the modal already.
The code syntax highlighting and copy buttons were also
broken in fullscreen because of modal changes over time.
This commit adds a new `search_default_sort_order` site setting,
set to "relevance" by default, that controls the default sort order
for the full page /search route.
If the user changes the order in the dropdown on that page, we remember
their preference automatically, and it takes precedence over the site
setting as a default from then on. This way people who prefer e.g.
Latest Post as their default can make it so.
Why this change?
As the number of themes which the Discourse team supports officially
grows, we want to ensure that changes made to Discourse core do not
break the plugins. As such, we are adding a step to our Github actions
test job to run the QUnit tests for all official themes.
What does this change do?
This change adds a new job to our tests Github actions workflow to run the QUnit
tests for all official plugins. This is achieved with the following
changes:
1. Update `testem.js` to rely on the `THEME_TEST_PAGES` env variable to set the
`test_page` option when running theme QUnit tests with testem. The
`test_page` option [allows an array to be specified](https://github.com/testem/testem#multiple-test-pages) such that tests for
multiple pages can be run at the same time. We are relying on a ENV variable
because the `testem` CLI does not support passing a list of pages
to the `--test_page` option.
2. Support a `/testem-theme-qunit/:testem_id/theme-qunit` Rails route in the development environment. This
is done because testem prefixes the path with a unique ID to the configured `test_page` URL.
This is problematic for us because we proxy all testem requests to the
Rails server and testem's proxy configuration option does not allow us
to easily rewrite the URL to remove the prefix. Therefore, we configure a proxy in testem to prefix `theme-qunit` requests with
`/testem-theme-qunit` which can then be easily identified by the Rails server and routed accordingly.
3. Update `qunit:test` to support a `THEME_IDS` environment variable
which will allow it to run QUnit tests for multiple themes at the
same time.
4. Support `bin/rake themes:qunit[ids,"<theme_id>|<theme_id>"]` to run
the QUnit tests for multiple themes at the same time.
5. Adds a `themes:qunit_all_official` Rake task which runs the QUnit
tests for all the official themes.
This PR refactors the following:
* leaving all the CSS applied to the old `modal-body` classes in their respective files
* made new clean styling for `.d-modal` and refactored the template to use the new BEM classes
* `inner-`, `middle-`, `outer-` container classes are gone and replaced with simplified `wrapper` and `container` classes
* use standardised max-sizes with modifiers `-large` and `-max`
* lighter backdrop,
* min-width to prevent puny modals
* other styling changes regarding padding, close button,…
* pulled out all modal overrides into a general `modal-overrides` file + cleanup of outdated CSS
* pulled out login and create account modal styling into their own file, cause it's such a big override
* removed old general login.scss file for mobile & desktop
* only kept some remainders I don't want to touch in `app/assets/stylesheets/common/base/login.scss`
We ask users to confirm their session if they are making a sensitive
action, such as adding/updating second factors or passkeys. This
commit adds the ability to confirm sessions with passkeys as an option
to the password confirmation.
- Remove vendored copy
- Update Rails implementation to look for language definitions in node_modules
- Use webpack-based dynamic import for hljs core
- Use browser-native dynamic import for site-specific language bundle (and fallback to webpack-based dynamic import in tests)
- Simplify markdown implementation to allow all languages into the `lang-{blah}` className
- Now that all languages are passed through, resolve aliases at runtime to avoid the need for the pre-built `highlightjs-aliases` index
Previously, the app HTML served by the Ember-CLI proxy was generated based on a 'bootstrap json' payload generated by Rails. This inevitably leads to differences between the Rails HTML and the Ember-CLI HTML.
This commit overhauls our proxying strategy. Now, we totally ignore the ember-cli `index.html` file. Instead, we take the full HTML from Rails and surgically replace script URLs based on a `data-discourse-entrypoint` attribute. This should be faster (only one request to Rails), more robust, and less confusing for developers.
Followup to fe05fdae24
For consistency with other S3 settings, make the global setting
the same name as the site setting and use SiteSetting.Upload
too so it reads from the correct place.
This commit adds an /admin/customize/theme-components route,
that opens the theme page with the components tab pre-selected,
so people can navigate to that directly.
Switches to using a dialog to confirm a session (i.e. sudo mode for
account changes where we want to be extra sure the current user is who
they say they are) to match what we do with passkeys.
This commit adds an `enable_s3_transfer_acceleration` site setting,
which is hidden to begin with. We are adding this because in certain
regions, using https://aws.amazon.com/s3/transfer-acceleration/ can
drastically speed up uploads, sometimes as much as 70% in certain
regions depending on the target bucket region. This is important for
us because we have direct S3 multipart uploads enabled everywhere
on our hosting.
To start, we only want this on the uploads bucket, not the backup one.
Also, this will accelerate both uploads **and** downloads, depending
on whether a presigned URL is used for downloading. This is the case
when secure uploads is enabled, not anywhere else at this time. To
enable the S3 acceleration on downloads more generally would be a
more in-depth change, since we currently store S3 Upload record URLs
like this:
```
url: "//test.s3.dualstack.us-east-2.amazonaws.com/original/2X/6/123456.png"
```
For acceleration, `s3.dualstack` would need to be changed to `s3-accelerate.dualstack`
here.
Note that for this to have any effect, Transfer Acceleration must be enabled
on the S3 bucket used for uploads per https://docs.aws.amazon.com/AmazonS3/latest/userguide/transfer-acceleration-examples.html.
When Discourse first introduced brotli support, reverse-proxy/CDN support for passing through the accept-encoding header to our NGINX server was very poor. Therefore, a separate `/brotli_assets/...` path was introduced to serve the brotli assets. This worked well, but introduces additional complexity and inconsistencies.
Nowadays, Brotli encoding is well supported, so we don't need the separate paths any more. Requests can be routed to the asset `.js` URLs, and NGINX will serve the brotli/gzip version of the asset automatically.
This aims to help admins and developers identify the cause of loading issues on routes.
As with other theme/plugin errors, the UI banner is only shown to administrators. For non-admins, the information is only written to the browser console.
This commit introduces a new feature that allows theme developers to manage the transformation of theme settings over time. Similar to Rails migrations, the theme settings migration system enables developers to write and execute migrations for theme settings, ensuring a smooth transition when changes are required in the format or structure of setting values.
Example use cases for the theme settings migration system:
1. Renaming a theme setting.
2. Changing the data type of a theme setting (e.g., transforming a string setting containing comma-separated values into a proper list setting).
3. Altering the format of data stored in a theme setting.
All of these use cases and more are now possible while preserving theme setting values for sites that have already modified their theme settings.
Usage:
1. Create a top-level directory called `migrations` in your theme/component, and then within the `migrations` directory create another directory called `settings`.
2. Inside the `migrations/settings` directory, create a JavaScript file using the format `XXXX-some-name.js`, where `XXXX` is a unique 4-digit number, and `some-name` is a descriptor of your choice that describes the migration.
3. Within the JavaScript file, define and export (as the default) a function called `migrate`. This function will receive a `Map` object and must also return a `Map` object (it's acceptable to return the same `Map` object that the function received).
4. The `Map` object received by the `migrate` function will include settings that have been overridden or changed by site administrators. Settings that have never been changed from the default will not be included.
5. The keys and values contained in the `Map` object that the `migrate` function returns will replace all the currently changed settings of the theme.
6. Migrations are executed in numerical order based on the XXXX segment in the migration filenames. For instance, `0001-some-migration.js` will be executed before `0002-another-migration.js`.
Here's a complete example migration script that renames a setting from `setting_with_old_name` to `setting_with_new_name`:
```js
// File name: 0001-rename-setting.js
export default function migrate(settings) {
if (settings.has("setting_with_old_name")) {
settings.set("setting_with_new_name", settings.get("setting_with_old_name"));
}
return settings;
}
```
Internal topic: t/109980
Two changes were introduced:
1. Reorder links on sidebar section is removed. Clicking and holding the mouse for 250ms was unintuitive;
2. Fixed bugs when reorder is done in edit modal.
This commit fixes an issue where clicking the default
"Take Action" option on a flag for a post doesn't always
end up with the post hidden.
This is because the "take_action" score bonus doesn’t take into account
the final score required to hide the post.
Especially with the `hide_post_sensitivity` site setting set to `low`
sensitivity, there is a likelihood the score needed to hide the post
won’t be reached.
Now, the default "Take Action" button has been changed to "Hide Post"
to reflect what is actually happening and the description has been
improved, and if "Take Action" is clicked we _always_ hide the post
regardless of score and sensitivity settings. This way the action reflects
expectations of the user.
* FEATURE: Add keywords support for site_settings search
This change allows for a new `keywords` field that can be added to site
settings in order to help with searching. Keywords are not visible in
the UI, but site settings matching one of the contained keywords will
appear when searching for that keyword.
Keywords can be added for site settings inside of the
`config/locales/server.en.yml` file under the new `keywords` key.
```
site_settings
example_1: "fancy description"
example_2: "another description"
keywords:
example_1: "capybara"
```
* Add keywords entry for a recently changed site setting and add system specs
* Use page.visit now that we have our own visit
The message: :signup_not_allowed option to the IP address validator does nothing, because the AllowedIpAddressValidator chooses one of either:
- ip_address.blocked or
- ip_address.max_new_accounts_per_registration_ip
internally. This means that the translation for this was also never used.
This PR removes the ineffectual option and the unused translation. It also moves the translated error messages for blocked and max_new_accounts_per_registration_ip into the correct location so we can pass a symbol to ActiveModel::Errors#add.
There is no actual change in behaviour.
Followup to 9762e65758. This
original commit did not take into account the fact that
new topics can end up in the approval queue as a
ReviewableQueuedPost, and so there was a 500 error raised
when accessing `self.topic` when sending a PM to the user.
