This change converts the `approve_unless_trust_level` site setting to
`approve_unless_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Adds the new site setting
- Adds a deprecation warning
- Updates core to use the new settings.
- Adds a migration to fill in the new setting of the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates many tests to account for the new change
After a couple of months we will remove the `approve_unless_trust_level`
setting entirely.
Internal ref: /t/115696
This commit adds a new `search_default_sort_order` site setting,
set to "relevance" by default, that controls the default sort order
for the full page /search route.
If the user changes the order in the dropdown on that page, we remember
their preference automatically, and it takes precedence over the site
setting as a default from then on. This way people who prefer e.g.
Latest Post as their default can make it so.
This commit adds an `enable_s3_transfer_acceleration` site setting,
which is hidden to begin with. We are adding this because in certain
regions, using https://aws.amazon.com/s3/transfer-acceleration/ can
drastically speed up uploads, sometimes as much as 70% in certain
regions depending on the target bucket region. This is important for
us because we have direct S3 multipart uploads enabled everywhere
on our hosting.
To start, we only want this on the uploads bucket, not the backup one.
Also, this will accelerate both uploads **and** downloads, depending
on whether a presigned URL is used for downloading. This is the case
when secure uploads is enabled, not anywhere else at this time. To
enable the S3 acceleration on downloads more generally would be a
more in-depth change, since we currently store S3 Upload record URLs
like this:
```
url: "//test.s3.dualstack.us-east-2.amazonaws.com/original/2X/6/123456.png"
```
For acceleration, `s3.dualstack` would need to be changed to `s3-accelerate.dualstack`
here.
Note that for this to have any effect, Transfer Acceleration must be enabled
on the S3 bucket used for uploads per https://docs.aws.amazon.com/AmazonS3/latest/userguide/transfer-acceleration-examples.html.
No plugins or themes rely on anonymous_posting_min_trust_level so we
can just switch straight over to anonymous_posting_allowed_groups
This also adds an AUTO_GROUPS const which can be imported in JS
tests which is analogous to the one defined in group.rb. This can be used
to set the current user's groups where JS tests call for checking these groups
against site settings.
Finally a AtLeastOneGroupValidator validator is added for group_list site
settings which ensures that at least one group is always selected, since if
you want to allow all users to use a feature in this way you can just use
the everyone group.
This commit adds a new admin UI under the route `/admin-revamp`, which is
only accessible if the user is in a group defined by the new `enable_experimental_admin_ui_groups` site setting. It
also adds a special `admin` sidebar panel that is shown instead of the `main`
forum one when the admin is in this area.
We also add an "Admin Revamp" sidebar link to the community section, which
will only appear if the user is in the setting group:
Within this there are subroutes defined like `/admin-revamp/config/:area`,
these areas could contain any UI imaginable, this is just laying down an
initial idea of the structure and how the sidebar will work. Sidebar links are
currently hardcoded.
Some other changes:
* Changed the `main` and `chat` panels sidebar panel keys to use exported const values for reuse
* Allowed custom sidebar sections to hide their headers with the `hideSectionHeader` option
* Add a `groupSettingArray` setting on `this.siteSettings` in JS, which accepts a group site setting name
and splits it by `|` then converts the items in the array to integers, similar to the `_map` magic for ruby
group site settings
* Adds a `hidden` option for sidebar panels which prevents them from showing in separated mode and prevents
the switch button from being shown
---------
Co-authored-by: Krzysztof Kotlarek <kotlarek.krzysztof@gmail.com>
This commit introduces a new endpoint to search categories and uses it
instead of the categories map that is preloaded using SiteSerializer.
This feature is enabled only when the hidden site setting
lazy_load_categories is enabled and should be used only on sites with
many categories.
At this moment, this feature is under a site setting named
lazy_load_categories.
In the future, categories will no longer be preloaded through site data.
This commit add information about categories in topic list and ensures
that data is used to display topic list items.
Parent categories are serialized too because they are necessary to
render {{category-link}}.
This commit adds a new Revise... action that can be taken
for queued post reviewables. This will open a modal where
the user can select a Reason from a preconfigured list
(or by choosing Other..., a custom reason) and provide feedback
to the user about their post.
The post will be rejected still, but a PM will also be sent to
the user so they have an opportunity to improve their post when
they resubmit it.
This is part 2 (of 3) for passkeys support.
This adds a hidden site setting plus routes and controller actions.
1. registering passkeys
Passkeys are registered in a two-step process. First, `create_passkey`
returns details for the browser to create a passkey. This includes
- a challenge
- the relying party ID and Origin
- the user's secure identifier
- the supported algorithms
- the user's existing passkeys (if any)
Then the browser creates a key with this information, and submits it to
the server via `register_passkey`.
2. authenticating passkeys
A similar process happens here as well. First, a challenge is created
and sent to the browser. Then the browser makes a public key credential
and submits it to the server via `passkey_auth_perform`.
3. renaming/deleting passkeys
These routes allow changing the name of a key and deleting it.
4. checking if session is trusted for sensitive actions
Since a passkey is a password replacement, we want to make sure to confirm the user's identity before allowing adding/deleting passkeys. The u/trusted-session GET route returns success if user has confirmed their session (and failed if user hasn't). In the frontend (in the next PR), we're using these routes to show the password confirmation screen.
The `/u/confirm-session` route allows the user to confirm their session with a password. The latter route's functionality already existed in core, under the 2FA flow, but it has been abstracted into its own here so it can be used independently.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The hidden site setting max_drafts_per_user defaults to 10_000 drafts per user.
The longest key should be "topic_<MAX_BIG_INT>" which is 25 characters.
We have one site setting, `auto_silence_fast_typers_max_trust_level`, which expects a trust level. However, the type is set to integer, which makes it very hard for a layman to enter the correct thing.
This PR changes the type of the site setting to the `TrustLevelSetting` enum.
The use of these are interchangeable in the back-end, since `SiteSetting.auto_silence_fast_typers_max_trust_level` still returns the integer value with the enum.
This adds a new secure_uploads_pm_only site setting. When secure_uploads
is true with this setting, only uploads created in PMs will be marked
secure; no uploads in secure categories will be marked as secure, and
the login_required site setting has no bearing on upload security
either.
This is meant to be a stopgap solution to prevent secure uploads
in a single place (private messages) for sensitive admin data exports.
Ideally we would want a more comprehensive way of saying that certain
upload types get secured which is a hybrid/mixed mode secure uploads,
but for now this will do the trick.
Why this change?
As part of our ongoing efforts to security harden the Discourse
application, we are adding the `cross_origin_opener_policy_header` site setting
which allows the `Cross-Origin-Opener-Policy` response header to be set on requests
that preloads the Discourse application. In more technical terms, only
GET requests that are not json or xhr will have the response header set.
The `cross_origin_opener_policy_header` site setting is hidden for now
for testing purposes and will either be released as a public site
setting or be remove if we decide to be opinionated and ship a default
for the `Cross-Origin-Opener-Policy` response header.
According to the output of this rake task:
`LOAD_PLUGINS=0 bin/rails "site_settings:find_dead"`
which searches for unused site settings, these settings:
```
rate_limit_new_user_create_topic
enable_system_avatars
check_for_new_features
allow_user_api_keys
```
are unused.
Why this change?
This is a follow up to e8f7b62752.
Tracking of GC stats didn't really belong in the `MethodProfiler` class
so we want to extract that concern into its own class.
As part of this PR, the `track_gc_stat_per_request` site setting has
also been renamed to `instrument_gc_stat_per_request`.
What does this change do?
This change adds a hidden `track_gc_stat_per_request` site setting which
when enabled will track the time spent in GC, major GC count and minor
GC count during a request.
Why is this change needed?
We have plans to tune our GC in production but without any
instrumentation, we will not be able to know if our tuning is effective
or not. This commit takes the first step at instrumenting some basic GC
stats in core during a request which can then be consumed by the discourse-prometheus plugin.
Allow anonymous users (logged-in, but set to anonymous posting) to like posts
---------
Co-authored-by: Emmett Ling <eling@zendesk.com>
Co-authored-by: Nat <natalie.tay@discourse.org>
This adds an option to allow non-image s3 files to be downloaded through CDN URL.
Addresses the issues in:
* meta.discourse.org/t/s3-cdn-url-not-being-used-on-non-image-uploads/175332
* meta.discourse.org/t/s3-uploads-using-cdn-for-pdfs/213218
Follow-up to b27e12445d
This commit adds 2 new site settings `default_sidebar_link_to_filtered_list` and `default_sidebar_show_count_of_new_items` to control the default values for the navigation menu preferences that were added in the linked commit (`sidebar_link_to_filtered_list` and `sidebar_show_count_of_new_items` respectively).
Followup to d51baa3bb3
Also includes: Force full rerender of post-stream widget when switching topics. This ensures that plugin/theme decorators are re-run when we switch between topics with the loading slider enabled.
This brings the functionality from https://github.com/discourse/discourse-loading-slider into Discourse core. Default behaviour remains the same - the new slider mode can be enabled using the new 'page_loading_indicator' site setting.
Why this change?
We are currently not fully satisfied with the current way to edit the
categories and tags that appears in the sidebar where the user is
redirected to the tracking preferences tab in the user's profile causing
the user to lose context of the current page. In addition, the dropdown
to select categories or tags limits the amount of information we can
display.
Since editing or adding a custom categories section is already using a
modal, we have decided to switch editing the categories and tags that
appear in the sidebar to use a modal as well.
This commit removes the `new_edit_sidebar_categories_tags_interface_groups` site setting and
make the modals the default for all users.
New setting which allow admin to define behavior when topic is in watched category and muted topic and vice versa.
If watched_precedence_over_muted setting is true, that topic is still visible in list of topics and notification is created.
If watched_precedence_over_muted setting is false, that topic is not still visible in list of topics and notification is skipped as well.
This PR splits up the preference that controls the count vs dot and destination of sidebar links, which is really hard to understand, into 2 simpler checkboxes:
The new preferences/checkboxes are off by default, but there are database migrations to switch the old preference to the new ones so that existing users don't have to update their preferences to keep their preferred behavior of sidebar links when this changed is rolled out.
Internal topic: t/103529.
# Top level view
This PR is the first version of converting the search menu and its logic from (deprecated) widgets to glimmer components. The changes are hidden behind a group based feature flag. This will give us the ability to test the new implementation in a production setting before fully committing to the new search menu.
# What has changed
The majority of the logic from the widget implementation has been updated to fit within the context of a glimmer component, but it has not fundamentally changed. Instead of having a single widget - [search-menu.js](https://github.com/discourse/discourse/blob/main/app/assets/javascripts/discourse/app/widgets/search-menu.js) - that built the bulk of the search menu logic, we split the logic into (20+) bite size components. This greatly increases the readability and makes extending a component in the search menu much more straightforward.
That being said, certain pieces needed to be rewritten from scratch as they did not translate from widget -> glimmer, or there was a general code upgraded needed. There are a few of these changes worth noting:
### Search Service
**Search Term** -> In the widget implementation we had a overly complex way of managing the current search term. We tracked the search term across multiple different states (`term`, `opts.term`, `searchData.term`) causing headaches. This PR introduces a single source of truth:
```js
this.search.activeGlobalSearchTerm
```
This tracked value is available anywhere the `search` service is injected. In the case the search term should be needs to be updated you can call
```js
this.search.activeGlobalSearchTerm = "foo"
```
**event listeners** -> In the widget implementation we defined event listeners **only** on the search input to handle things such as
- keyboard navigation / shortcuts
- closing the search menu
- performing a search with "enter"
Having this in one place caused a lot of bloat in our logic as we had to handle multiple different cases in one location. Do _x_ if it is this element, but do _y_ if it is another. This PR updates the event listeners to be attached to individual components, allowing for a more fine tuned set of actions per element. To not duplicate logic across multiple components, we have condensed shared logic to actions on the search service to be reused. For example - `this.search.handleArrowUpOrDown` - to handle keyboard navigation.
### Search Context
We have unique logic based on the current search context (topic / tag / category / user / etc). This context is set within a models route file. We have updated the search service with a tracked value `searchContext` that can be utilized and updated from any component where the search service is injected.
```js
# before
this.searchService.set("searchContext", user.searchContext);
# after
this.searchService.searchContext = user.searchContext;
```
# Views
<img width="434" alt="Screenshot 2023-06-15 at 11 01 01 AM" src="https://github.com/discourse/discourse/assets/50783505/ef57e8e6-4e7b-4ba0-a770-8f2ed6310569">
<img width="418" alt="Screenshot 2023-06-15 at 11 04 11 AM" src="https://github.com/discourse/discourse/assets/50783505/2c1e0b38-d12c-4339-a1d5-04f0c1932b08">
<img width="413" alt="Screenshot 2023-06-15 at 11 04 34 AM" src="https://github.com/discourse/discourse/assets/50783505/b871d164-88cb-405e-9b78-d326a6f63686">
<img width="419" alt="Screenshot 2023-06-15 at 11 07 51 AM" src="https://github.com/discourse/discourse/assets/50783505/c7309a19-f541-47f4-94ef-10fa65658d8c">
<img width="424" alt="Screenshot 2023-06-15 at 11 04 48 AM" src="https://github.com/discourse/discourse/assets/50783505/f3dba06e-b029-431c-b3d0-36727b9e6dce">
<img width="415" alt="Screenshot 2023-06-15 at 11 08 57 AM" src="https://github.com/discourse/discourse/assets/50783505/ad4e7250-040c-4d06-bf06-99652f4c7b7c">
Communities can use sidebar or header dropdown, therefore navigation menu is a better name settings in 2 places:
- Old user sidebar preferences;
- Site setting about default tags and categories.
* FEATURE: Implement max_tags_per_email_subject
* made it so only max_tags_per_email_subject is responsible for tags in emails when the feature is enabled
* added locales for implemented siteSettings
* reworded locale for enable_max_tags_per_email_subject
* added min value for max_tags_per_email_subject
* Implemented suggested changes to spec description
* FEATURE: Content custom summarization strategies.
This PR establishes a pattern for plugins to register alternative ways of summarizing content by extending a class that defines an interface.
Core controls which strategy we'll use and who has access to it through the `summarization_strategy` and `custom_summarization_allowed_groups`. It also defines the UI for summarizing topics.
Other plugins can access this summarization mechanism and implement their features, removing cross-plugin customizations, as it currently happens between chat and the discourse-ai plugin.
* Group membership validation and rate limiting
* Work with objects instead of classes
* Port summarization feature from discourse-ai to chat
* Rename available summaries to 'Top Replies' and 'Summary'
Improves the layout of most grids in posts, by using `object-fit: cover` for most images. This allows images to better fill up the space, without changing their aspect ratio.
Adds a new `[grid]` tag that can arrange images (or other media) into a grid in posts.
The grid defaults to a 3-column with a few exceptions:
- if there are only 2 or 4 items, it defaults to a 2-column grid (because it generally looks better)
- on mobile, it defaults to a 2-column grid
- if there is only one item, the grid has no effect
What this change?
We are currently not fully satisfied with the current way to edit the
categories and tags that appears in the sidebar where the user is
redirected to the tracking preferences tab in the user's profile causing
the user to lose context of the current page. In addition, the dropdown
to select categories or tags limits the amount of information we can
display.
Since editing or adding a custom categories section is already using a
modal, we have decided to switch editing the categories and tags that
appear in the sidebar to use a modal as well.
This commit ships a first pass of the edit categories modal such that we
can keep the commit small and reviewable. The incomplete nature of the
feature is also reflected in the fact that the feature is hidden behind
a new `new_edit_sidebar_categories_tags_interface_groups` site setting.
AWS recommends running buckets without ACLs, and to use resource policies to manage access control instead.
This is not a bad idea, because S3 ACLs are whack, and while resource policies are also whack, they're a more constrained form of whack.
Further, some compliance regimes get antsy if you don't go with the vendor's recommended settings, and arguing that you need to enable ACLs on a bucket just to store images in there is more hassle than it's worth.
The new site setting (s3_use_acls) cannot be disabled when secure
uploads is enabled -- the latter relies on private ACLs for security
at this point in time. We may want to reexamine this in future.
* FEATURE: reduce avatar sizes to 6 from 20
This PR introduces 3 changes:
1. SiteSetting.avatar_sizes, now does what is says on the tin.
previously it would introduce a large number of extra sizes, to allow for
various DPIs. Instead we now trust the admin with the size list.
2. When `avatar_sizes` changes, we ensure consistency and remove resized
avatars that are not longer allowed per site setting. This happens on the
12 hourly job and limited out of the box to 20k cleanups per cycle, given
this may reach out to AWS 20k times to remove things.
3.Our default avatar sizes are now "24|48|72|96|144|288" these sizes were
very specifically picked to limit amount of bluriness introduced by webkit.
Our avatars are already blurry due to 1px border, so this corrects old blur.
This change heavily reduces storage required by forums which simplifies
site moves and more.
Co-authored-by: David Taylor <david@taylorhq.com>
Privacy Policy and Terms of Service topics are no longer created by
default for communities that have not set a company name. For this
reason, some URLs were pointing to 404 page.
Legal topics, such as the Terms of Service and Privacy Policy topics
do not make sense if the entity creating the community is not a company.
These topics will be created and updated only when the company name is
present and deleted when it is not.
The welcome topic user tip was for admins only, but in general, user
tips should be used for guiding new users through the features that
Discourse offers. For this reason, we decided to remove the user tip.
This commit also includes a few more copy tweaks to the welcome topic.
added site toggle functionality through site settings
added tests to implemented feature
Introduced suggested correction
renamed find_new_topic method and deleted click_new_topic_button method
Currently the /new-category url can be accessed by moderators, regardless of whether the Site Setting for moderators_manage_categories_and_groups is true or false.
On top of this, non authorized users can also access this page but shows errors (no 404 loaded).
Since the 404 redirect happens within Ember, we need to allow the site setting value to be accessed within JS.
After this change all non admin users will see a 404 for this route, the exception being moderators if the moderators_manage_categories_and_groups setting has a value of true.
/t/73360
* DEV: move sidebar community section to database
Before, community section was hard-coded. In the future, we are planning to allow admins to edit it. Therefore, it has to be moved to database to `custom_sections` table.
Few steps and simplifications has to be made:
- custom section was hidden behind `enable_custom_sidebar_sections` feature flag. It has to be deleted so all forums, see community section;
- migration to add `section_type` column to sidebar section to show it is a special type;
- migration to add `segment` column to sidebar links to determine if link should be displayed in primary section or in more section;
- simplify more section to have one level only (secondary section links are merged);
- ensure that links like `everything` are correctly tracking state;
- make user an anonymous links position consistence. For example, from now on `faq` link for user and anonymous is visible in more tab;
- delete old community-section template.
Responding to negative behaviour tends to solicit more of the same. Common wisdom states: "don't feed the trolls".
This change codifies that advice by introducing a new nudge when hitting the reply button on a flagged post. It will be shown if either the current user, or two other users (configurable via a site setting) have flagged the post.
* FEATURE: add a setting to allowlist DiscourseConnect return path domains
This commit adds a site setting to allowlist DiscourseConnect return
path domains. The setting needs supports exact domain or wildcard
character (*) to allow for any domain as return path.
* Add more specs to clarify what is allowed in site setting
* Update setting description to explain what is allowed
This feature will allow sites to define which emoji are not allowed. Emoji in this list should be excluded from the set we show in the core emoji picker used in the composer for posts when emoji are enabled. And they should not be allowed to be chosen to be added to messages or as reactions in chat.
This feature prevents denied emoji from appearing in the following scenarios:
- topic title and page title
- private messages (topic title and body)
- inserting emojis into a chat
- reacting to chat messages
- using the emoji picker (composer, user status etc)
- using search within emoji picker
It also takes into account the various ways that emojis can be accessed, such as:
- emoji autocomplete suggestions
- emoji favourites (auto populates when adding to emoji deny list for example)
- emoji inline translations
- emoji skintones (ie. for certain hand gestures)
This adds a SiteSetting, which when enabled, creates a small_action post for tag/category changes to the topic. It uses `topic.add_moderator_post, and passes raw text in, to describe the change.
Invite only and Discourse connect could not be enabled at the same time
because of some legacy reason. This is a follow up commit to ce04db8,
355d51a and 40f6ceb.
Way back when this was introduced way back in b96c10a903
I didn't have any frame of reference for what these max rate
limit numbers should be, so 10 seemed like a reasonable limit
until a real world case where this did not make sense came
along.
The time has come.
Moving these into site settings, which are hidden since in most
cases there is no need to change these.
What is the problem?
We have a hidden site setting `show_category_definitions_in_topic_lists`
which is set to false by default. What this means is that category
definition topics are not shown in the topic list by default. Only the
category definition topic for the category being viewed will be shown.
However, we have a bug where we would show that a category has new
topics when a new child category along with its category definition
topic is created even though the topic list does not list the child
category's category definition topic.
What is the fix here?
This commit fixes the problem by shipping down an additional
`is_category_topic` attribute in `TopicTrackingStateItemSerializer` when
the `show_category_definitions_in_topic_lists` site setting has been set
to false. With the new attribute, we can then exclude counting child
categories' category definition topics when counting new and unread
counts for a category.
This commit introduces a few experimental changes to the New topics list and "Everything" link in the sidebar:
1. Make the New topics list include unread topics
2. Make the Everything section in the sidebar link to the New topics list (`/new`)
3. Remove "unread" or "new" text next to the count and keep the count
4. The count is a sum of new and unread topics counts
All of these of changes are behind an off-by-default feature flag. I've not written extensive tests for these changes because they're highly experimental.
Internal topic: t/77234.
With the introduction of the sidebar navigation menu, the design team at
Discourse redesigned the user profile navigation to better coexist with
the sidebar.
- Reduce duplication of terms in post index from unlimited to 6. This will
result in reduced index size and reduced weighting for posts containing
a huge amount of duplicate terms. (Eg: a post containing "sam sam sam sam
sam sam sam sam", will index as "sam sam sam sam sam sam", only including
the word up to 6 times.) This corrects a flaw where title weighting could
be ignored.
- Prioritize exact matches of words in titles. Our search always performs
a prefix match. However we want to give special weight to exact title matches
meaning that a search for "sum" will find topics such as "the sum of us" vs
"summer in spring".
- Pick up fixes to our search algorithm which are missing from old indexes.
Specifically pick up the fix that indexes URLs properly. (`https://happy.com`
was stemmed to `happi` in keywords and then was not searchable)
see also:
https://meta.discourse.org/t/refinements-to-search-being-tested-on-meta/254158
Indexing will take a while and work in batches, in the background.
Remove the per user groups based site setting in favor of a global site setting as we want to roll the glimmer topic timeline out to anon users as well as site users.
- Add `enable_experimental_topic_timeline` site setting
- Remove `enable_experimental_topic_timeline_groups` site setting
Allows users to configure their own custom sidebar sections with links withing Discourse instance. Links can be passed as relative path, for example "/tags" or full URL.
Only path is saved in DB, so when Discourse domain is changed, links will be still valid.
Feature is hidden behind SiteSetting.enable_custom_sidebar_sections. This hidden setting determines the group which members have access to this new feature.
Currently, when doing `@mention` for users we have 0 tolerance for typos and misspellings.
With this patch, if a user search doesn't return enough results we go and use `pg_trgm` features to try and find more matches based on trigrams of usernames and names.
It also introduces GiST indexes on those fields in order to improve performance of this search, going from 130ms down to 15ms in my tests.
This is all gated in a feature flag and can be enabled by running `SiteSetting.user_search_similar_results = true` in the rails console.
The new `prioritize_exact_search_match` can be used to force the search
algorithm to prioritize exact term matches in title when ranking results.
This is scoped narrowly to titles for cases such as a topic titled:
"organisation chart" and a search of "org chart".
If we scoped this wider, all discussion about "org chart" would float to
the top and leave a very common title de-prioritized.
This is a hidden site setting and it has some performance impact due
to double ranking.
That said, performance impact is somewhat mitigated cause ranking on
title alone is a very cheap operation.
Currently `Topic#pm_topic_count` is a count of all personal messages tagged for a given tag. As a result, any user with access to PM tags can poll a sensitive tag to determine if a new personal message has been created using that tag even if the user does not have access to the personal message. We classify this as a minor leak in sensitive information.
With this commit, `Topic#pm_topic_count` is hidden from users by default unless the `display_personal_messages_tag_counts` site setting is enabled.
* FEATURE: allow restricting duplication in search index
This introduces the site setting `max_duplicate_search_index_terms`.
Using this number we limit the amount of duplication in our search index.
This allows us to more correctly weight title searches, so bloated posts
don't unfairly bump to the top of search results.
This feature is completely disabled by default and behind a site setting
We will experiment with it first. Note entire search index must be rebuilt
for it to take effect.
---------
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Many users seems surprised by prefix matching in search leading to
unexpected results.
Over the years we always would return results starting with a search term
and not expect exact matches.
Meaning a search for `abra` would find `abracadabra`
This introduces the Site Setting `enable_search_prefix_matching` which
defaults to true. (behavior unchanged)
We plan to experiment on select sites with exact matches to see if the
results are less surprising
Currently, `Tag#topic_count` is a count of all regular topics regardless of whether the topic is in a read restricted category or not. As a result, any users can technically poll a sensitive tag to determine if a new topic is created in a category which the user has not excess to. We classify this as a minor leak in sensitive information.
The following changes are introduced in this commit:
1. Introduce `Tag#public_topic_count` which only count topics which have been tagged with a given tag in public categories.
2. Rename `Tag#topic_count` to `Tag#staff_topic_count` which counts the same way as `Tag#topic_count`. In other words, it counts all topics tagged with a given tag regardless of the category the topic is in. The rename is also done so that we indicate that this column contains sensitive information.
3. Change all previous spots which relied on `Topic#topic_count` to rely on `Tag.topic_column_count(guardian)` which will return the right "topic count" column to use based on the current scope.
4. Introduce `SiteSetting.include_secure_categories_in_tag_counts` site setting to allow site administrators to always display the tag topics count using `Tag#staff_topic_count` instead.
Specifying wildcard characters which also happen to be regex
meta characters for `auto_approve_email_domains`, `allowed_email_domains`
and `blocked_email_domains` site settings currently breaks email
validation.
This change prevents these characters from being specified for these
site settings. It does this by switching the site setting type
from `list` to `host_list`. The `host_list` validator checks for these
characters.
In addition, this change also improves the site setting descriptions and
introduces a migration to fix existing records.
The `enable_new_notifications_menu` site setting allows sites that have
`navigation_menu` set to `legacy` to use the redesigned notifications
menu before switching to the new sidebar navigation menu.
There are various performance issues with the Canvas in iOS Safari
that are causing crashes when processing images with spikes of over 100%
CPU usage. The cause of this is unknown, but profiling points to
CanvasRenderingContext2D.getImageData() and
CanvasRenderingContext2D.drawImage().
Until Safari makes some progress with OffscreenCanvas or other
alternatives we cannot support this workflow. We will revisit in 6
months.
This is gated behind the hidden `composer_ios_media_optimisation_image_enabled`
site setting for people who really still want to try using this.
This feature is stable enough now to make it the default going forward
for new sites. Existing sites that have not yet set enable_experimental_hashtag_autocomplete
to `true` will have it set to `false` for their site settings, which was the old default.
c.f https://meta.discourse.org/t/hashtags-are-getting-a-makeover/248866
This PR removes the limit added to max_users_notified_per_group_mention during #19034 and improve the performance when expanding mentions for large channel or groups by removing some N+1 queries and making the whole process async.
* Fully async chat message notifications
* Remove mention setting limit and get rid of N+1 queries
* DEV: Skip push notifications for active online users
Currently, users with active push subscriptions get push notifications
regardless of their "presence" on the site.
This change introduces a `push_notification_time_window_mins`
site setting which is used in conjunction with a user's `last_seen_at` to
determine if push notifications should be sent. A user is considered to
be actively online if their `last_seen_at` is within `push_notification_time_window_mins`
minutes. `push_notification_time_window_mins` is set to 10 by default.
* DEV: Remove client param for push_notification_time_window_mins site setting
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
Co-authored-by: Bianca Nenciu <nbianca@users.noreply.github.com>
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
* FEATURE: Add support for desktop push notifications in core
Default to push for live notifications on desktop if available and
`enable_desktop_push_notifications` site setting set to true.
This removes the need for desktop-push-notifications plugin.
* DEV: Ensure live notifications are enabled explicitly
Allow a user with push notification access who has directly
enabled notifications via the browser settings to trigger push subscription
flow.
FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
* FEATURE: Enforce mention limits for chat messages
The first part of these changes adds a new setting called `max_mentions_per_chat_message`, which skips notifications when the message contains too many mentions. It also respects the `max_users_notified_per_group_mention` setting
and skips notifications if expanding a group mention would exceed it.
We also include a new component to display JIT warning for these limits to the user while composing a message.
* Simplify ignoring/muting filter in chat_notifier
* Post-send warnings for unsent warnings
* Improve pluralization
* Address review feedback
* Fix test
* Address second feedback round
* Third round of feedback
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
In an effort to modernize our codebase to the latest Ember version we have selected the Topic Timeline as a candidate to be refactored. The topic timeline component was originally built with `Widgets` and this PR will upgrade it to `Glimmer Components`.
The refactored timeline is hidden by default behind a group flag, `SiteSetting.enable_experimental_topic_timeline_groups`. Being part of a group included in this site setting will make the new timeline available for testing.
## Other points of interest
This PR introduces a `Draggable Modifier` available to all components, which will take the place of the existing _drag functionality_ exclusive to widgets.
It can be included like so:
```
{{draggable didStartDrag=@didStartDrag didEndDrag=@didEndDrag dragMove=@dragMove }}
```
This changes the hashtag search to first do a lookup to find
results where the slug exactly matches the
search term. Now when we search for hashtags, the
exact matches will be found first and put at the top of
the results.
`ChatChannelFetcher` has also been modified here to allow
for more options for performance -- we do not need to
query DM channels for secured IDs when looking up or searching
channels for hashtags, since they should never show in
results there (they have no slugs). Nor do we need to include
the channel archive records.
Also changes the limit of hashtag results to 20 by default
with a hidden site setting, and makes it so the scroll for the
results is overflowed.
The hidden site setting `suppress_secured_categories_from_admin` will
suppress visibility of categories without explicit access from admins
in a few key areas (category drop downs and topic lists)
It is not intended to be a security wall since admins can amend any site
setting. Instead it is feature that allows hiding the categories from the
UI.
Admins will still be able to see topics in categories without explicit
access using direct URLs or flags.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* FEATURE: Default Composer Category Site Setting
- Create the default_composer_category site setting
- Replace general_category_id logic for auto selecting the composer
category
- Prevent Uncategorized from being selected if not allowed
- Add default_composer_category option to seeded categories
- Create a migration to populate the default_composer_category site
setting if there is a general_category_id populated
- Added some tests
* Add missing translation for the new site setting
* fix some js tests
* Just check that the header value is null
Previously, we didn't have a site-wide setting to set the default behavior for user profile visibility and user presence features. But we already have a user preference for that.
The previous implementation would attempt to fetch groups using the end-user's Google auth token. This only worked for admin accounts, or users with 'delegated' access to the `admin.directory.group.readonly` API.
This commit changes the approach to use a single 'service account' for fetching the groups. This removes the need to add permissions to all regular user accounts. I'll be updating the [meta docs](https://meta.discourse.org/t/226850) with instructions on setting up the service account.
This is technically a breaking change in behavior, but the existing implementation was marked experimental, and is currently unusable in production google workspace environments.
This commit introduces a new framework for building user tutorials as
popups using the Tippy JS library. Currently, the new framework is used
to replace the old notification spotlight and tips and show a new one
related to the topic timeline.
All popups follow the same structure and have a title, a description and
two buttons for either dismissing just the current tip or all of them
at once.
The state of all seen popups is stored in a user option. Updating
skip_new_user_tips will automatically update the list of seen popups
accordingly.
This initial PR just adds a enable_experimental_hashtag_autocomplete
setting, and related JS & HBR files, replacing direct setup of
the autocomplete within d-editor and instead using the new
lib/hashtag-autocomplete. This is the beginning of preparations
to allow other data sources to be added to this autocomplete,
as well as a redesign of the menu and rendered tags in the composer
preview and posts.
Follow up to e62e93f83a.
It's confusing and unexpected that deprecated settings
unconditionally change the new setting's value via the
`SiteSettingsController`, even if `override` was set to `false`,
a follow-up PR will correct the issue in `SiteSettingsController`.
This can no longer be used from the user interface and could be used to
generate useless topic invites notifications. This commit adds site
setting max_topic_invitations_per_minute to prevent invite spam.
* FEATURE: Make General the default category
* Set general as the default category in the composer model instead
* use semicolon
* Enable allow_uncategorized_topics in create_post spec helper for now
* Check if general_category_id is set
* Enable allow_uncategorized_topics for test env
* Provide an option to the create_post helper to not set allow_uncategorized_topics
* Add tests to check that category… is not present and that General is selected automatically
By default, only staff members have to confirm their old email when
changing it. This commit adds a site setting that when enabled will
always ask the user to confirm old email.
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
* FEATURE: add composer warning when user haven't been seen in a long time
When a user creates a PM and adds a recipient that hasn't been seen in a
long time then we'll now show a warning in composer indicating that the
user hasn't been seen in a long time.
By default, we won't include associated account ids in current user serializer. If the new hidden site setting `include_associated_account_ids` is enabled then we will add it in the serializer.
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
This commits introduces a new SiteSetting.enable_new_user_profile_nav_groups
feature flag. When configured, users of the configured groups will see
the new user page navigation links.
As of this commit, only the user activity navigation link has been
converted to the newly proposed dropdown of navigation links.
Mobile support has not been considered.
- Seed the General category so that the general chat channel will have
a home
- Do not seed the Lounge category anymore
- Move the "Welcome to Site" topic to the General category
This commits makes the `enable_experimental_sidebar_hamburger` and
`enable_sidebar` site settings public for site admins to enable. While
the site settings are public, do note that the features are still under
heavy development and are subjected to rapid changes
* FIX: Rejected emails should not be cleaned up before their logs
If we delete the rejected emails before we delete their associated logs
we will receive 404 errors trying to inspect an email message for that
log.
* don't add a blank line
* test for max value as well
* pr cleanup and add migration
* Fix failing test
This commit removes the ability to enable/disable the Sidebar on a per
user basis and introduces a site wide setting. For testing purposes, sidebar can be enabled/disabled via the `enable_sidebar=1` or `enable_sidebar=0` query param.
* FIX: min/max username length limits weren't validated
The custom validators introduced in e0d7cda made so we ignored the mix
and max values set on site_settings.yml. That change allowed admins to
set values outside of the range defined on the yaml file.
Related to https://meta.discourse.org/t/group-names-with-more-than-60-characters-broken/232115?u=falco
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
This PR introduces a new hidden site setting that allows admins to display a splash screen while site assets load.
The splash screen can be enabled via the `splash_screen` hidden site setting.
This is what the splash screen currently looks like
5ceb72f085.mp4
Once site assets load, the splash screen is automatically removed.
To control the loading text that shows in the splash screen, you can change the preloader_text translation string in admin > customize > text
At some point in the past we decided to rename the 'regular' notification state of topics/categories to 'normal'. However, some UI copy was missed when the initial renaming was done so this commit changes the spots that were missed to the new name.
This commit introduces a new site setting: `block_hotlinked_media`. When enabled, all attempts to hotlink media (images, videos, and audio) will fail, and be replaced with a linked placeholder. Exceptions to the rule can be added via `block_hotlinked_media_exceptions`.
`download_remote_image_to_local` can be used alongside this feature. In that case, hotlinked images will be blocked immediately when the post is created, but will then be replaced with the downloaded version a few seconds later.
This implementation is purely server-side, and does not impact the composer preview.
Technically, there are two stages to this feature:
1. `PrettyText.sanitize_hotlinked_media` is called during `PrettyText.cook`, and whenever new images are introduced by Onebox. It will iterate over all src/srcset attributes in the post HTML and check if they're allowed. If not, the attributes will be removed and replaced with a `data-blocked-hotlinked-src(set)` attribute
2. In the `CookedPostProcessor`, we iterate over all `data-blocked-hotlinked-src(set)` attributes and check whether we have a downloaded version of the media. If yes, we update the src to use the downloaded version. If not, the entire media element is replaced with a placeholder. The placeholder is labelled 'external media', and is a link to the offsite media.
Previously we hardcoded the DOWNLOAD_URL_EXPIRES_AFTER_SECONDS const
inside S3Helper to be 5 minutes (300 seconds). For various reasons,
some hosted sites may need this to be longer for other integrations.
The maximum expiry time for presigned URLs is 1 week (which is
604800 seconds), so that has been added as a validation on the
setting as well. The setting is hidden because 99% of the time
it should not be changed.
Meta topic: https://meta.discourse.org/t/prevent-to-linkify-when-there-is-a-redirect/226964/2?u=osama.
This commit adds a new site setting `block_onebox_on_redirect` (default off) for blocking oneboxes (full and inline) of URLs that redirect. Note that an initial http → https redirect is still allowed if the redirect location is identical to the source (minus the scheme of course). For example, if a user includes a link to `http://example.com/page` and the link resolves to `https://example.com/page`, then the link will onebox (assuming it can be oneboxed) even if the setting is enabled. The reason for this is a user may type out a URL (i.e. the URL is short and memorizable) with http and since a lot of sites support TLS with http traffic automatically redirected to https, so we should still allow the URL to onebox.
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
Currently the only way to allow tagging on pms is to use the `allow_staff_to_tag_pms` site setting. We are removing that site setting and replacing it with `pm_tags_allowed_for_groups` which will allow for non staff tagging. It will be group based permissions instead of requiring the user to be staff.
If the existing value of `allow_staff_to_tag_pms` is `true` then we include the `staff` groups as a default for `pm_tags_allowed_for_groups`.
This was causing issues on some sites, having the const, because this really is heavily
dependent on upload speed. We request 5-10 URLs at a time with this endpoint; for
a 1.5GB upload with 5mb parts this could mean 60 requests to the server to get all
the part URLs. If the user's upload speed is super fast they may request all 60
batches in a minute, if it is slow they may request 5 batches in a minute.
The other external upload endpoints are not hit as often, so they can stay as constant
values for now. This commit also increases the default to 20 requests/minute.
When an admin enters a badly formed regular expression in the
permalink_normalizations site setting, a RegexpError exception is
generated everytime a URL is normalized (see Permalink.normalize_url).
The new validator validates every regular expression present in the
setting value (delimited by '|').
This commit introduces a new site setting: `use_name_for_username_suggestions` (default true)
Admins can disable it if they want to stop using Name values when generating usernames for users. This can be useful if you want to keep real names private-by-default or, when used in conjunction with the `use_email_for_username_and_name_suggestions` setting, you would prefer to use email-based username suggestions.
* hidden siteSetting to enable experimental sidebar
* user preference to enable experimental sidebar
* `experimental_sidebar_enabled` attribute for current user
* Empty glimmer component for Sidebar
* Adds a hidden site setting: `max_participant_names`
* Replaces duplicate code in `GroupSmtpMailer` and `UserNotifications`
* Groups are sorted by the number of users (decreasing)
* Replaces the query to count users of each group with `Group#user_count`)
* Users are sorted by their last reply in the topic (most recent first)
* Adds lots of tests
This PR enables custom email dark mode styles by default that were added here.
There is currently poor support for dark mode queries in mail clients. The main beneficiary of these changes will be Apple Mail and Outlook.
Enjoy the darkness 🕶️
* FEATURE: Let sites add a sitemap.xml file.
This PR adds the same features discourse-sitemap provides to core. Sitemaps are only added to the robots.txt file if the `enable_sitemap` setting is enabled and `login_required` disabled.
After merging discourse/discourse-sitemap#34, this change will take priority over the sitemap plugin because it will disable itself. We're also using the same sitemaps table, so our migration won't try to create it
again using `if_not_exists: true`.
Due to default CSP web workers instantiated from CDN based assets are still
treated as "same-origin" meaning that we had no way of safely instansiating
a web worker from a theme.
This limits the theme system and adds the arbitrary restriction that WASM
based components can not be safely used.
To resolve this limitation all js assets in about.json are also cached on
local domain.
{
"name": "Header Icons",
"assets" : {
"worker" : "assets/worker.js"
}
}
This can then be referenced in JS via:
settings.theme_uploads_local.worker
local_js_assets are unconditionally served from the site directly and
bypass the entire CDN, using the pre-existing JavascriptCache
Previous to this change this code was completely dormant on sites which
used s3 based uploads, this reuses the very well tested and cached asset
system on s3 based sites.
Note, when creating local_js_assets it is highly recommended to keep the
assets lean and keep all the heavy working in CDN based assets. For example
wasm files can still live on the CDN but the lean worker that loads it can
live on local.
This change unlocks wasm in theme components, so wasm is now also allowed
in `theme_authorized_extensions`
* more usages of upload.content
* add a specific test for upload.content
* Adjust logic to ensure that after upgrades we still get a cached local js
on save
This commit introduces a new use_polymorphic_bookmarks site setting
that is default false and hidden, that will be used to help continuous
development of polymorphic bookmarks. This setting **should not** be
enabled anywhere in production yet, it is purely for local development.
This commit uses the setting to enable create/update/delete actions
for polymorphic bookmarks on the server and client side. The bookmark
interactions on topics/posts are all usable. Listing, searching,
sending bookmark reminders, and other edge cases will be handled
in subsequent PRs.
Comprehensive UI tests will be added in the final PR -- we already
have them for regular bookmarks, so it will just be a matter of
changing them to be for polymorphic bookmarks.
We rolled out a change to disable canonical indexing.
The goal behind it was to limit crawl budget by Google being spent
scanning non canonical topic links.
Since this change was applied we rolled out 2 fixes that made the change
no longer needed.
1. Topic RSS feeds are no longer followed, links in the RSS feeds are
not followed.
2. Post RSS feeds now contain canonical links.
Combined these two changes mean crawlers no longer discover a large
amount on non-canonical links on Discourse sites.
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
Similar site settings exist for likes and edits and the new ones work
in a similar way.
By default, users below TL2 have a limit of 20, the limit is increased
by 1.5 for TL2 users up to 30, by 2 for TL3 users up to 40 and by 3 for
TL4 users up to 60.
The 5s difference was causing anon clients to have ~5s gaps between their long-polling requests. On busy sites, this could be enough time for them to build up a backlog, which then becomes much more expensive for us on the server-side.
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
