IntenseWebs/freeipa
3
0
Fork 0
mirror of https://salsa.debian.org/freeipa-team/freeipa.git synced 2024-12-25 16:31:08 -06:00
Code Issues Packages Projects Releases Wiki Activity
7bf99e8dc5
freeipa/.gitignore

122 lines
2.1 KiB
Plaintext
Raw Normal View History

Build: use standard infrastructure for translations We now use standard framework generatedby "gettextize" utility. It has two limitations which I do not consider sufficiently important to invest into hand-made solution: 1. It can automatically gather strings only from files which have some file extension like .c or .py. Right now we do not have any translatable strings in Python files without extensions. Given that these files will be removed from source tree and replaced with entry points from setuptools I do not see a reason to invest into supporting this. 2. It does not automatically strip untranslated strings from po files. This is a manual step in mainteiner's in workflow anyway so I will add separate Makefile target for it later on. This commit contains gettextize instrastructure + filled-in files Makevars and POTFILES.in. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-11 15:54:13 -06:00
# Autotools files - generated by autoreconf -i
/m4
# gettext infrastructure
/ABOUT-NLS
/po/*.gmo
/po/*~
Build: remove ipa.pot from Git as it can be re-generated at any time All the source files are in the very same repo so there is no point in keeping the file in Git. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-15 16:04:34 -06:00
/po/ipa.pot
Build: support strip-po target for translations The target was added to top-level Makefile.am as well so the maintainer does not need to jump between directories when doing Zanata pull/push and strip-po. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-14 03:27:15 -06:00
/po/Makefile.hack
Build: use standard infrastructure for translations We now use standard framework generatedby "gettextize" utility. It has two limitations which I do not consider sufficiently important to invest into hand-made solution: 1. It can automatically gather strings only from files which have some file extension like .c or .py. Right now we do not have any translatable strings in Python files without extensions. Given that these files will be removed from source tree and replaced with entry points from setuptools I do not see a reason to invest into supporting this. 2. It does not automatically strip untranslated strings from po files. This is a manual step in mainteiner's in workflow anyway so I will add separate Makefile target for it later on. This commit contains gettextize instrastructure + filled-in files Makevars and POTFILES.in. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-11 15:54:13 -06:00
/po/Makefile.in.in
/po/Makevars.template
/po/POTFILES
Build: automatically generate list of files to be translated in configure configure is easiest option how to automatically generate POTFILES.in. Attempts to add it to po/Makefile* have big potential to create cyclic depedencies and cause other trouble. Given how rare operation adding a source file is, I think it is sufficient to document that configure needs to be run again after adding a source file with translatable strings. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-14 07:53:42 -06:00
/po/POTFILES.in
Build: use standard infrastructure for translations We now use standard framework generatedby "gettextize" utility. It has two limitations which I do not consider sufficiently important to invest into hand-made solution: 1. It can automatically gather strings only from files which have some file extension like .c or .py. Right now we do not have any translatable strings in Python files without extensions. Given that these files will be removed from source tree and replaced with entry points from setuptools I do not see a reason to invest into supporting this. 2. It does not automatically strip untranslated strings from po files. This is a manual step in mainteiner's in workflow anyway so I will add separate Makefile target for it later on. This commit contains gettextize instrastructure + filled-in files Makevars and POTFILES.in. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-11 15:54:13 -06:00
/po/remove-potcdate.sed
Lowered the version of gettext The lower version is needed while building on RHEL. Also po/Rules-quot file is deleted and added to .gitignore. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Petr Spacek <pspacek@redhat.com>
2016-12-07 05:16:56 -06:00
/po/Rules-quot
Build: use standard infrastructure for translations We now use standard framework generatedby "gettextize" utility. It has two limitations which I do not consider sufficiently important to invest into hand-made solution: 1. It can automatically gather strings only from files which have some file extension like .c or .py. Right now we do not have any translatable strings in Python files without extensions. Given that these files will be removed from source tree and replaced with entry points from setuptools I do not see a reason to invest into supporting this. 2. It does not automatically strip untranslated strings from po files. This is a manual step in mainteiner's in workflow anyway so I will add separate Makefile target for it later on. This commit contains gettextize instrastructure + filled-in files Makevars and POTFILES.in. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-11 15:54:13 -06:00
/po/stamp-po
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
# In-tree build files
Ignore useless stuff by default
2010-10-18 10:14:05 -05:00
configure
config.h
config.h.in
Makefile
Makefile.in
.deps/
.libs/
*.la
*.lo
Ignore log files from automake tests
2013-04-16 15:22:27 -05:00
*.log
Ignore useless stuff by default
2010-10-18 10:14:05 -05:00
*.o
Ignore log files from automake tests
2013-04-16 15:22:27 -05:00
*.trs
Ignore backup~ files like config.h.in~ Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Petr Spacek <pspacek@redhat.com>
2016-12-05 04:54:20 -06:00
*~
Ignore useless stuff by default
2010-10-18 10:14:05 -05:00
version.m4
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
aclocal.m4
autom4te.cache/
config.guess
config.log
Build: use standard infrastructure for translations We now use standard framework generatedby "gettextize" utility. It has two limitations which I do not consider sufficiently important to invest into hand-made solution: 1. It can automatically gather strings only from files which have some file extension like .c or .py. Right now we do not have any translatable strings in Python files without extensions. Given that these files will be removed from source tree and replaced with entry points from setuptools I do not see a reason to invest into supporting this. 2. It does not automatically strip untranslated strings from po files. This is a manual step in mainteiner's in workflow anyway so I will add separate Makefile target for it later on. This commit contains gettextize instrastructure + filled-in files Makevars and POTFILES.in. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com> Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
2016-11-11 15:54:13 -06:00
config.rpath
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
config.status
config.sub
depcomp
install-sh
ltmain.sh
missing
stamp-h1
libtool
build/
Add asn1c generated code for keytab controls Instead of manually encoding controls, use an actual asn1 compiler. The file asn1/asn1c/ipa.asn1 will contain ipa modules. The generated code is committed to the tree and built into a static library that is linked to the code that uses it. The first module implements the GetKeytabControl control. Related: https://fedorahosted.org/freeipa/ticket/4718 https://fedorahosted.org/freeipa/ticket/4728 Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com> Reviewed-By: Nathaniel McCallum <npmccallum@redhat.com>
2014-11-13 10:31:09 -06:00
compile
Build: replace hand-made Makefile with one generated by Automake The neither build nor dist targets work completely. This is temporary breakage enabling further work. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com>
2016-10-25 05:34:29 -05:00
test-driver
gitignore: ignore tar ball Add tar ball generated by build to gitignore. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Petr Spacek <pspacek@redhat.com>
2016-11-09 09:20:56 -06:00
freeipa-*.tar.gz
Build: IPA_VERSION_IS_GIT_SNAPSHOT re-generates version number on RPM build This is a huge hack. rpms target will touch VERSION.m4 file. This change is then detected by automake Makefiles which subsequently re-execute configure and make. We have to workaround fact that variables in new make targets (executed after new configure) are different than original ones. Also, we have to 'bake-in' precise snapshot version from Git to VERSION.m4 inside of RPM tarball so the RPM does not depend on git anymore. All this magic slows build down a bit. Do not enable IPA_VERSION_IS_GIT_SNAPSHOT if you want fastest possible builds. The option IPA_VERSION_IS_GIT_SNAPSHOT is now enabled by default as it was before we started the build system refactoring effort. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
2016-11-09 09:16:45 -06:00
.tarball_name
.version
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
# Python compilation
*.pyc
py-compile
# Developer documentation
freeipa2-dev-doc
~/doc/guide/Makefile
# Root directory
/freeipa.spec
/dist/
tox testing support for client wheel packages Add tox infrastructure to test client wheel packages workflow: * build client packages * install client packages * ipa-run-tests --ipaclient-unittests under Python 2 and 3 * pylint of client packages under Python 2 and 3 * placeholder packages work as expected Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Martin Basti <mbasti@redhat.com>
2016-11-17 09:43:17 -06:00
/.tox/
/.cache/
Port all setup.py to setuptools All setup.py files are now using setuptools through a common file ipasetup.py. The file is auto-generated and contain all common settings. Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Petr Spacek <pspacek@redhat.com> Reviewed-By: Jan Cholasta <jcholast@redhat.com> Reviewed-By: Martin Basti <mbasti@redhat.com>
2016-10-04 06:23:22 -05:00
/*/dist/
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
/RELEASE
Add rpmbuild/ to .gitignore
2013-12-19 15:45:55 -06:00
/rpmbuild/
Port all setup.py to setuptools All setup.py files are now using setuptools through a common file ipasetup.py. The file is auto-generated and contain all common settings. Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Petr Spacek <pspacek@redhat.com> Reviewed-By: Jan Cholasta <jcholast@redhat.com> Reviewed-By: Martin Basti <mbasti@redhat.com>
2016-10-04 06:23:22 -05:00
# Build
/ipasetup.py
Constrain wheel package versions The presence of IPA packages on PyPI revealed an interesting issue with make wheel_bundle. pip gives final releases a higher precedence than our development packages. make wheel_bundle downloads ipa 4.5.0 from PyPI instead of using our own wheels. Use a constraint file to enforce correct versions. https://pagure.io/freeipa/issue/6468 Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Martin Basti <mbasti@redhat.com>
2017-03-17 04:35:48 -05:00
/.wheelconstraints
Port all setup.py to setuptools All setup.py files are now using setuptools through a common file ipasetup.py. The file is auto-generated and contain all common settings. Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Petr Spacek <pspacek@redhat.com> Reviewed-By: Jan Cholasta <jcholast@redhat.com> Reviewed-By: Martin Basti <mbasti@redhat.com>
2016-10-04 06:23:22 -05:00
*.egg-info
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
# Subdirectories
Build: integrate daemons/dnssec into build system https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com>
2016-11-02 14:48:08 -05:00
/daemons/dnssec/ipa-dnskeysyncd.service
/daemons/dnssec/ipa-ods-exporter.service
/daemons/dnssec/ipa-ods-exporter.socket
Clean / ignore make check artefact In tree runs of make check leave some artifacts around. The patch adds them to make clean and .gitignore. Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Martin Babinsky <mbabinsk@redhat.com> Reviewed-By: Martin Basti <mbasti@redhat.com>
2017-01-09 04:23:32 -06:00
/daemons/ipa-kdb/ipa_kdb_tests
/daemons/ipa-kdb/tests/.dirstamp
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
/daemons/ipa-otpd/ipa-otpd
/daemons/ipa-otpd/ipa-otpd.socket
/daemons/ipa-otpd/ipa-otpd@.service
Clean / ignore make check artefact In tree runs of make check leave some artifacts around. The patch adds them to make clean and .gitignore. Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Martin Babinsky <mbabinsk@redhat.com> Reviewed-By: Martin Basti <mbasti@redhat.com>
2017-01-09 04:23:32 -06:00
/daemons/ipa-slapi-plugins/ipa-cldap/ipa_cldap_tests
/daemons/ipa-slapi-plugins/ipa-extdom-extop/extdom_cmocka_tests
/daemons/ipa-slapi-plugins/libotp/t_hotp
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
/daemons/ipa-version.h
/daemons/test-driver
Build: move translations from install/po/ to top-level po/ Translations are need for client as well. This move is done to remove dependency between client and install subdirectories. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com> Reviewed-By: Stanislav Laznicka <slaznick@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com>
2016-10-13 08:42:30 -05:00
/po/test.po
/po/test_locale/xh_ZA/LC_MESSAGES/ipa.mo
Build: integrate init and init/systemd into build system At the same time, I've renamed tmpfilesd config file to static name "ipa.conf" instead of using package-specific name. It had no purpose and just complicated build and packaging. Variable substitution into configuration has to be done in Makefile and not in Autoconf as documented in: Autoconf v2.69 manual chapter 4.8.2 Installation Directory Variables: ... Most of these variables have values that rely on prefix or exec_prefix. ... Similarly, you should not rely on AC_CONFIG_FILES to replace bindir and friends in your shell scripts and other files; instead, let make manage their replacement. https://fedorahosted.org/freeipa/ticket/6418 Reviewed-By: Martin Basti <mbasti@redhat.com> Reviewed-By: Christian Heimes <cheimes@redhat.com>
2016-11-03 05:03:03 -05:00
/init/ipa_memcached
/init/systemd/ipa-custodia.service
/init/systemd/ipa.service
/init/systemd/ipa_memcached.service
/init/tmpfilesd/ipa.conf
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
!/install/ui/doc/Makefile.in
Include npm related files into Makefile and .gitignore Extedned Makefile in install/ui - $ make clean-local removes npm related files in the install/ui directory Add node_modules and package-lock.json into .gitignore Fixes: https://pagure.io/freeipa/issue/7278 Reviewed-By: Christian Heimes <cheimes@redhat.com>
2017-11-24 04:58:58 -06:00
/install/ui/node_modules/
/install/ui/package-lock.json
# package-lock file can be commited, but it makes sense for npm packages.
# It stores informations about changes in node_modules. For now it is not
# very useful
# More info: https://docs.npmjs.com/files/package-lock.json
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
/install/ui/release
webui: add PaternFly css To update install/ui/css/patternfly.css you should: 1. clone Bootstrap 3, Font-Awesome, Bootstrap-Select and PatternFly to the same parent directory as for FreeIPA (or use symlinks) 2. checkout desired versions of each component 3. run install/ui/util/make-patternfly.css 4. when changing component versions, copy xxx/variables.less from each component to install/ui/less/xxx/ so we can use the variables in our less files This commit contain css made from component versions as follows: - PatternFly: 0.2.5 - Bootstrap: 3.1.1 - Bootstrap-select: 1.4.3 - Font-Awesome: 4.0.3 Reviewed-By: Endi Sukma Dewata <edewata@redhat.com>
2014-04-04 10:08:31 -05:00
/install/ui/css/ipa.css
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
/install/ui/src/dojo
/install/ui/src/build
/install/ui/src/libs/loader.js
/install/ui/src/plugins
!/install/ui/doc/Makefile
Split ipa-client/ into ipaclient/ (Python library) and client/ (C, scripts) Make ipaclient a Python library like ipapython, ipalib, etc. Use setup.py instead of autotools for installing it. Move C client tools, Python scripts, and man pages, to client/. Remove old, empty or outdated, boilerplate files (NEWS, README, AUTHORS). Remove /setup-client.py (ipalib/setup.py should be used instead). Update Makefiles and the spec file accordingly. https://fedorahosted.org/freeipa/ticket/5638 Reviewed-By: Jan Cholasta <jcholast@redhat.com>
2016-01-14 07:15:49 -06:00
/client/ipa-getkeytab
/client/ipa-join
/client/ipa-rmkeytab
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
Use namespace-aware meta importer for ipaplatform Instead of symlinks and build-time configuration the ipaplatform module is now able to auto-detect platforms on import time. The meta importer uses the platform 'ID' from /etc/os-releases. It falls back to 'ID_LIKE' on platforms like CentOS, which has ID=centos and ID_LIKE="rhel fedora". The meta importer is able to handle namespace packages and the ipaplatform package has been turned into a namespace package in order to support external platform specifications. https://fedorahosted.org/freeipa/ticket/6474 Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Rob Crittenden <rcritten@redhat.com>
2017-10-11 05:09:30 -05:00
/ipaplatform/override.py
Consolidate .gitignore entries Clean up the .gitignore file: - Remove no longer used .gitignore entries, like .bzr files - Do not repeat autotools generated files over and over again - Whitelist existent Makefiles in the repository - Better separate the .gitignore entries
2013-12-09 10:36:07 -06:00
/ipapython/version.py
Ignore ipapython/.DEFAULT_PLUGINS https://pagure.io/freeipa/issue/6597 Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Jan Cholasta <jcholast@redhat.com>
2017-03-14 11:55:38 -05:00
/ipapython/.DEFAULT_PLUGINS
ipaplatform: Link to platform module during build time https://fedorahosted.org/freeipa/ticket/4052 Reviewed-By: Petr Viktorin <pviktori@redhat.com>
2014-06-03 05:35:53 -05:00
Add make targets for fast linting and testing Fast linting only needs modified files with pylint and diff with pycodestyle. It's good enough to detect most code errors very fast. It typically takes less than 10 seconds. A complete full pylint run uses all CPU cores for several minutes. PEP 8 violations are typically reported after 30 minutes to several hours on Travis CI. Fast lintings uses git diff and git merge-base to find all modified files in a branch or working tree. There is no easy way to find the branch source. On Travis the information is provided by Travis. For local development it's a new variable IPA_GIT_BRANCH in VERSION.m4. Fast testing execute all unit tests that do not depend on ipalib.api. In total it takes about 30-40 seconds (!) to execute linting, PEP 8 checks and unittests for both Python 2 and 3. Signed-off-by: Christian Heimes <cheimes@redhat.com> Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
2017-12-11 00:57:40 -06:00
/ipatests/.cache/
Reference in New Issue Copy Permalink