Test 'test_hsm_negative_bad_token_dir_permissions'
was failing in RHEL because of the below error.
"ipa: ERROR: stderr: usermod: invalid option -- 'r'"
Hence replaced the usermod with gpasswd command which does the same and
works on both RHEL and Fedora.
Ref: https://pagure.io/freeipa/issue/9626
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When ipa trust-add fails to retrieve the remote domain information,
it exits with "an internal error has occurred".
Handle the case with a better error message.
Fixes: https://pagure.io/freeipa/issue/9488
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test TestHSMNegative should be skipped if PKI is too old,
but its uninstall method does not check the PKI version.
Add a call to check_version in the class uninstall method.
Fixes: https://pagure.io/freeipa/issue/9648
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
This patch add tests to check the scenarios associated with
pagure tickets
https://pagure.io/freeipa/issue/9642 - ipa-migrate - properly handle invalid certificates
https://pagure.io/freeipa/issue/9619 - ipa-migrate starttls does not work
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test is often failing on timeout. Add 15min to the test definitions.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Run all commands as pkiuser when validating that the HSM token
is available, that the token library path is correct and that
the password can read keys. This will avoid issues where the
initial validation is ok but the pkiuser is not granted read
access to some part of the token. This is very possible
when using softhsm2.
Fixes: https://pagure.io/freeipa/issue/9626
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There were a few hardcoded places where it was set to
/tmp/token_passwd instead of using the class variable.
Don't rely on previous running tests installing the token
password file so they can be run individually.
Fixes: https://pagure.io/freeipa/issue/9603
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The test test_ipa_ipa_migration.py::TestIPAMigrateScenario1
::test_ipa_migrate_stage_mode is now passing, the issue has been fixed.
Related: https://pagure.io/freeipa/issue/9621
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sudhir Menon <sumenon@redhat.com>
The test test_ipa_ipa_migration.py::TestIPAMigrateScenario1::
test_ipa_migrate_version_option is now passing, issue has been fixed.
The -V option has been removed.
Related: https://pagure.io/freeipa/issue/9620
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sudhir Menon <sumenon@redhat.com>
Test to verify that replica connection check is not failing when
the AD administrator Administrator@AD.EXAMPLE.COM is
used for the deployment or promotion of a replica
Related: https://pagure.io/freeipa/issue/9542
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
For users who has no OTP tokens defined (yet), a missing token should
not be seen as a failure. This is needed to allow a basic password
change.
The logic around enforcement of OTP over LDAP bind is the following:
----------------------------------------------------------------------
- when LDAP OTP control is requested by the LDAP client, OTP is
explicitly required
- when EnforceLDAPOTP is set in the IPA configuration, OTP is implicitly
required, regardless of the state of LDAP client
In either case, only users with 'user-auth-type: otp' are allowed to
authenticate.
If these users have no OTP token associated yet, they will be allowed to
authenticate with their password. This is to allow initial password
change and adding an OTP token.
----------------------------------------------------------------------
Implement test that simulates lifecycle for new user who get to change
their password before adding an OTP token.
Related: https://pagure.io/freeipa/issue/5169
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Test automation added around the --token-password-file
option for server/replica/kra install.
Related: https://pagure.io/freeipa/issue/9603
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
After uninstall and restore, kinit is required before
launching any ipa command.
Related: https://pagure.io/freeipa/issue/9613
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This patch includes tests for ipa-ipa migration
tool
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mark Reynolds <mreynolds@redhat.com>
The test test_nested_group_members is performing a ssh login
with a private key and this command may fail if the root directory
does not have the right permissions on the ssh server
(see https://access.redhat.com/solutions/6798261)
Ensure that / has 755 before launching the test.
Fixes: https://pagure.io/freeipa/issue/9615
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Ideally all files created during an IPA server installation are
removed by the uninstaller. Some files are purposefully left,
like token passwords, private keys, logs and more. Add an
allow list for those files.
Include a test to catch any additional files that may be created
and left behind.
Fixes: https://pagure.io/freeipa/issue/8080
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test test_ssh_key_connection is performing a ssh login
with a private and this command may fail if the root directory
does not have the right permissions on the ssh server
(see https://access.redhat.com/solutions/6798261)
Ensure that / has 755 before launching the test.
Fixes: https://pagure.io/freeipa/issue/9607
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
With PKI 11.5.0, the test
test_cert.py::TestCAShowErrorHandling::test_ca_show_error_handling
is failing with an exception and a different error message.
Mark as xfail until PKI provides a fix
Related: https://pagure.io/freeipa/issue/9606
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Update the pipelines for ipa-4-12 branch:
- run tests on fedora 40
- use the vagrant image freeipa/ci-ipa-4-12-f40
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Test scenario: on a hidden replica, force the renewal of
PKINIT cert by calling getcert resubmit.
Related: https://pagure.io/freeipa/issue/9611
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Test scenario:
- ensure there is no /etc/ssh/ssh_config.orig file
- force ipa-client package reinstallation
- ensure no backup file is created in /etc/ssh/ssh_config.orig
Related: https://pagure.io/freeipa/issue/9610
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
batch(methods=Dict(), keeponly=list) will allow to execute batch of
commands and remove from the output everything but the attributes which
names were passed in the keeponly list.
This can be useful if you are only interested in getting names and
assigned random passwords, for example.
Fix batch API test in test_integration/test_idm_api.py and use it to
validate keeponly option.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
update after change in implementation of `krb_utils.get_principal()` now using GSSAPI
Related: https://pagure.io/freeipa/issue/9575
Signed-off-by: Erik Belko <ebelko@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Arguments were added to the configuration file to allow specifying
the token option values. These needed to be included into the
defaults as well.
This should be merged into the tests prior to pushing.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Use SoftHSM2 to install an IPA CA to store the keys in an HSM.
Whenenver new keys are generated either in the initial install
or if a KRA is installed then the token needs to be synced
between all servers prior to installing a new CA or KRA.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This certificate should not be renewed this way.
ipa-cacert-manage renew should be used.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This can be eventually squashed into the main "test" patch but
keeping it separate to make it easier to see what has happened.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Use SoftHSM2 to install an IPA CA to store the keys in an HSM.
Whenenver new keys are generated either in the initial install
or if a KRA is installed then the token needs to be synced
between all servers prior to installing a new CA or KRA.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Simple function that takes a list of file names and copies
them from one host to another.
It isn't the most efficient but for a small number of files it
should be sufficient.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ca.certStatusUpdateInterval manages how frequently to update
the certificate status in LDAP (expired, etc).
By default this is not set on the initial master and pkispawn sets
it to 0 on replicas. This can lead to no server running this
task and therefore the status attribute not reflecting the current
state.
On enabling CRL generation remove any value which will cause PKI
to use its default. On disabling set it to 0.
Only one server should run the update status task to prevent
unnecessary replication.
Fixes: https://pagure.io/freeipa/issue/9569
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
An admin can be disabled if he is not the last member of the
admins group. Update the expecrted error message.
Fixes: https://pagure.io/freeipa/issue/9574
Related: https://pagure.io/freeipa/issue/9489
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A previous change made it not possible to remove the admin
user. This also included disabling the admin user. The user can
be disabled, just not deleted because it is required.
Move the test test_ipa_cacert_manage_prune to the end of the
class because it changes time which can break replication.
Fixes: https://pagure.io/freeipa/issue/9489
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The error message format changed between releases of OpenSSL.
The updated version has dropped spaces around equal signs
between RDN elements in the subject.
e.g. In 3.1.1 it reports O = EXAMPLE.TEST, CN = IPA RA
and in 3.2.1 reports O=EXAMPLE.TEST, CN=IPA RA
So ignore all spacing in the error message so it works on all
versions.
I saw this in openssl-3.1.1-4.fc39.x86_64 vs
openssl-3.2.1-3.fc41.x86_64
Fixes: https://pagure.io/freeipa/issue/9567
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The ipa tool has nearly since epoch returned 2 for the case of
entry not found.
The certificate processing raises a separate error,
CertificateOperationsError, when something goes wrong.
This returns 1.
With the introduction of the JSON API most requests will get
a proper HTTP return code representing what went wrong. In this
case we can use 404 to determine if the request resulted in
a NotFound therefore can eventually return a 2 and be
consistent in return values.
Related: https://pagure.io/freeipa/issue/9562
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The commands ca-show and cert-show provide the ability to direct
the certificate output to a file. If the requested object was
not present then this resulted in a zero-length file.
This is because the check to determine if the file was writable,
by opening it, was done prior to the operation to retrieve
the entry.
So move the check after the data retrieval.
Also convert cert-show to be more consistent with ca-show.
I considered cleaning up the empty file afterward but IMHO we
shouldn't touch the file until we're ready to write. This
costs an API roundtrip but its a small price to pay for
potentially protecting existing data.
Fixes: https://pagure.io/freeipa/issue/9562
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
- kinit helpers are now in `ipalib.kinit`.
- helpers can now use default ccache locations like many other similar
helpers
- helpers return the result from `run` for debugging
- constants are now in `krb_utils`
- helpers pass `KRB5*` and `GSS*` env vars along, so `KRB5_TRACE` works
- document how to kinit for `ipalib.api`
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
A warning is added in ipa idrange-add/mod/del for
local ranges. Adapt the test expectation.
Related: https://pagure.io/freeipa/issue/9558
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
SIDGEN plugin only uses local ID ranges and thus a restart is really
needed only when a local range is added, modified or removed.
Also fix the SSSD warning because removal of any range requires restart
everywhere, not just on a specific server.
Fixes: https://pagure.io/freeipa/issue/9558
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Currently the test is using IPA_NSSDB_PWDFILE_TXT which is /etc/ipa/nssdb/pwdfile.txt
which causes error in STIG mode.
[root@master slapd-TESTRELM-TEST]# certutil -M -n 'TESTRELM.TEST IPA CA' -t ',,' -d . -f /etc/ipa/nssdb/pwdfile.txt
Incorrect password/PIN entered.
Hence modified the test to include paths.ETC_DIRSRV_SLAPD_INSTANCE_TEMPLATE/pwd.txt.
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
After the addition of a new idrange, the sidgen plugin is not
immediately aware of the new idrange and a restart of 389ds is
required. Otherwise the creation of new user/group with a uid/gid
inside the new range fails to grant a SID to the user/group.
Fixes: https://pagure.io/freeipa/issue/9558
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When authentication indicators were introduced in 2016, ipa-pwd-extop
plugin gained ability to reject LDAP BIND when an LDAP client insists
the authentication must use an OTP token. This is used by ipa-otpd to
ensure Kerberos authentication using OTP method is done with at least
two factors (the token and the password).
This enfrocement is only possible when an LDAP client sends the LDAP
control. There are cases when LDAP clients cannot be configured to send
a custom LDAP control during BIND operation. For these clients an LDAP
BIND against an account that only has password and no valid token would
succeed even if admins intend it to fail.
Ability to do LDAP BIND without a token was added to allow users to add
their own OTP tokens securely. If administrators require full
enforcement over LDAP BIND, it is cannot be achieved with LDAP without
sending the LDAP control to do so.
Add IPA configuration string, EnforceLDAPOTP, to allow administrators to
prevent LDAP BIND with a password only if user is required to have OTP
tokens. With this configuration enabled, it will be not possible for
users to add OTP token if one is missing, thus ensuring no user can
authenticate without OTP and admins will have to add initial OTP tokens
to users explicitly.
Fixes: https://pagure.io/freeipa/issue/5169
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
A few tests are changing the date back and forth using for
instance date -s +3Years+1day and date -s -3Years-1day.
This method does not bring the system back to the current date
if executed around Feb 28 or 29 on a leap year, and may result
in de-synchronized server and client.
Add a note in the test to warn about potential future failures.
Related: https://pagure.io/freeipa/issue/9548
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-restore is relying on the presence of specific directories,
e.g. /var/lib/dirsrv/slapd-/db/ipaca, to detect
which backends are in use (userRoot or ipaca).
With the switch to LMDB, these directories do not exist and the
restore fails finding the ipaca backend.
Use lib389.cli_ctl.dblib.run_dbscan utility instead to
check which backends are present.
This method was been introduced in 389ds 2.1.0 and works with
Berkeley DB and LMDB.
Add a --data option to the ipa-backup and ipa-restore tasks to do
only an LDIF backup and restore. Also add the ability to restore by
backend.
Add new tests to do a data-only backup and restore.
Fixes: https://pagure.io/freeipa/issue/9526
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The actual value is less important than whether it matches the
regular expression. A number of legal but difficult to know in
context realms could be passed in here (trust for example).
This fixes CVE-2024-1481
Fixes: https://pagure.io/freeipa/issue/9541
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
