`HTTP_CCACHE` path was introduced in [0], but hasn't been set as
gssproxy's cred_store option(`ccache`) and nowhere is really
used besides the removing of this not existed path. It is safe to
drop all referencies for `HTTP_CCACHE`.
As of 0.8.0[1] gssproxy uses `MEMORY` credentials type for cred_store
as default.
[0]: d2f5fc304f
[1]: 0e1b4a0c84
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The usage of the existing gssproxy service(`service/ipa-api`) leads
to undesirable for this case side effects such as auto renew of
expired credentials.
Fixes: https://pagure.io/freeipa/issue/8735
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
IPA installer now instructs systemd-resolved to use IPA's BIND DNS
server as primary DNS server.
Fixes: https://pagure.io/freeipa/issue/8275
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
zzz-ipa.conf now enables NetworkManager's systemd-resolved plugin when
systemd-resolved is detected.
See: https://pagure.io/freeipa/issue/8275
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On platforms which have system-wide crypto policy the latter has
to be included in openssl config.
Fixes: https://pagure.io/freeipa/issue/8094
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
For now Debian, Fedora, RHEL, etc. build BIND with 'native PKCS11'
support. Till recently, that was the strict requirement of DNSSEC.
The problem is that this restricts cross-platform features of FreeIPA.
With the help of libp11, which provides `pkcs11` engine plugin for
the OpenSSL library for accessing PKCS11 modules in a semi-
transparent way, FreeIPA could utilize OpenSSL version of BIND.
BIND in turn provides ability to specify the OpenSSL engine on the
command line of `named` and all the BIND `dnssec-*` tools by using
the `-E engine_name`.
Fixes: https://pagure.io/freeipa/issue/8094
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
When ipa-client-install is run on a system with no existing
authselect configuration (for instance a fedora 31 new install),
uninstallation is picking sssd profile but this may lead to
a configuration with differences compared to the pre-ipa-client
state.
Now that authselect provides an option to backup the existing
configuration prior to setting a profile, the client install
can save the backup name and uninstall is able to apply the
backup in order to go back to the pre-ipa-client state.
Fixes: https://pagure.io/freeipa/issue/8189
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
ca-certificates populates /etc/ssl/certs with symlinks to its input
files and then runs 'openssl rehash' to create the symlinks that libssl
uses to look up a CA certificate to see if it is trused.
'openssl rehash' ignores any files that contain more than one
certificate: <https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=945274>.
With this change, we write out trusted CA certificates to
/usr/local/share/ca-certificates/ipa-ca, one certificate per file.
The logic that decides whether to reload the store is moved up into the
original `insert_ca_certs_into_systemwide_ca_store` and
`remove_ca_certs_from_systemwide_ca_store` methods. These methods now
also handle any exceptions that may be thrown while updating the store.
The functions that actually manipulate the store are factored out into
new `platform_{insert,remove}_ca_certs` methods, which implementations
must override.
These new methods also orchestrate the cleanup of deprecated files (such
as `/etc/pki/ca-trust/source/anchors/ipa-ca.crt`), rather than having
the cleanup code be included in the same method that creates
`/etc/pki/ca-trust/source/ipa.p11-kit`.
As well as creating `/usr/local/share/ca-certificates/ipa-ca`, Debian
systems will now also have
`/usr/local/share/ca-certificates/ipa.p11-kit` be created. Note that
`p11-kit` in Debian does not use this file.
Fixes: https://pagure.io/freeipa/issue/8106
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Timo Aaltonen <tjaalton@debian.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Removing Travis CI in favour of Azure Pipelines.
All tests previously tested by Travis are also configured in Azure.
Repos [1] and [2] were used to build Docker images for Travis, thus
they are no longer required for branches master and ipa-4-8.
Branches ipa-4-7 and ipa-4-6 don't have Azure pipelines configured,
so Travis will continue to be used by them.
1 - https://github.com/freeipa/ipa-docker-test-runner
2 - https://github.com/freeipa/freeipa-builder
Related: https://pagure.io/freeipa/issue/7323
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Client connections no longer override TLS version range and ciphers by
default. Instead clients use the default settings from the system's
crypto policy.
Minimum TLS version is now TLS 1.2. The default crypto policy on
RHEL 8 sets TLS 1.2 as minimum version, while Fedora 31 sets TLS 1.0 as
minimum version. The minimum version is configured with OpenSSL 1.1.1
APIs. Python 3.6 lacks the setters to override the system policy.
The effective minimum version is always TLS 1.2, because FreeIPA
reconfigures Apache HTTPd on Fedora.
Fixes: https://pagure.io/freeipa/issue/8125
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
urllib3 now supports post-handshake authentication with TLS 1.3. Enable
TLS 1.3 support for Apache HTTPd.
The update depends on bug fixes for TLS 1.3 PHA support in urllib3 and
Apache HTTPd. New builds are available in freeipa-master COPR and in
F30/F31.
Overwrite crypto-policy on Fedora only. Fedora 31 and earlier have TLS
1.0 and 1.1 still enabled by default.
Fixes: https://pagure.io/freeipa/issue/8125
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
ipa installer creates /etc/pkcs11/modules/softhsm2.module in order
to disable global p11-kit configuration for NSS.
This file was not included in the backups, and not restored.
The fix adds the file to the list of files to include in a backup.
Fixes: https://pagure.io/freeipa/issue/8073
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Calling authselect at uninstall time before restoring user-nsswitch.conf
would result in a sudoers entry in nsswitch.conf which is not activated
in the default sssd authselect profile.
Make sure user-nsswitch.conf is restored before calling authselect.
Fixes: https://pagure.io/freeipa/issue/8054
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
authselect doesn't allow one to directly write to
/etc/nsswitch.conf. It will complain bitterly if it
detects it and will refuse to work until reset.
Instead it wants the user to write to
/etc/authselect/user-nsswitch.conf and then it will handle
merging in any differences.
To complicate matters some databases are not user configurable
like passwd, group and of course, automount. There are some
undocumented options to allow one to override these though so
we utilize that.
tasks are used so that authselect-based installations can still
write directly to /etc/nsswitch.conf and operate as it used to.
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When 74e09087 started disabling softshm2 module in p11-kit-proxy,
we missed to restore SELinux context on the configuration override
creation.
We don't need an explicit restore_context() when removing the override
because restore_file() already calls restore_context().
Related: https://pagure.io/freeipa/issue/7810
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
IPA now uses the system-wide crypto policy for TLS ciphers on RHEL. It's
also now possible to keep the default policy by setting TLS_HIGH_CIPHERS
to None.
Fixes: https://pagure.io/freeipa/issue/7998
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
TLS 1.3 is causing some trouble with client cert authentication.
Conditional client cert authentication requires post-handshake
authentication extension on TLS 1.3. The new feature is not fully
implemented yet.
TLS 1.0 and 1.1 are no longer state of the art and now disabled by
default.
TLS 1.2 works everywhere and supports PFS.
Related: https://pagure.io/freeipa/issue/7667
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Drop the SSLProtocol directive for Fedora and RHEL systems. mod_ssl
will use crypto policies for the set of protocols.
For Debian systems configure a similar set of protocols for what
was previously configured, but do it in a different way. Rather than
iterating the allowed protocols just include the ones not allowed.
Fixes: https://pagure.io/freeipa/issue/7667
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The p11-kit configuration injects p11-kit-proxy into all NSS databases.
Amongst other p11-kit loads SoftHSM2 PKCS#11 provider. This interferes
with 389-DS, certmonger, Dogtag and other services. For example certmonger
tries to open OpenDNSSEC's SoftHSM2 token, although it doesn't use it at
all. It also breaks Dogtag HSM support testing with SoftHSM2.
IPA server does neither need nor use SoftHSM2 proxied by p11-kit.
Related: https://pagure.io/freeipa/issue/7810
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Dogtag PKI typically takes around 10 seconds to start and respond to
requests. Dogtag uses a simple systemd service, which means systemd is
unable to detect when Dogtag is ready. Commands like ``systemctl start``
and ``systemctl restart`` don't block and wait until the CA is up. There
have been various workarounds in Dogtag and IPA.
Systemd has an ExecStartPost hook to run programs after the main service
is started. The post hook blocks systemctl start and restart until all
post hooks report ready, too. The new ipa-pki-wait-running script polls
on port 8080 and waits until the CA subsystem returns ``running``.
Related: https://pagure.io/freeipa/issue/7916
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
IPA used to write a custom /etc/resolv.conf. On Fedora and RHEL,
NetworkManager is typically maintaining resolv.conf. On reboot or
restart of the service, NM overwrites the custom settings.
On systems with NM enabled, the DNS server installer now drops a config
file into NM's global config directory and delegates resolv.conf to NM.
On systems without NM, fall back to create /etc/resolv.conf directly.
Fixes: https://pagure.io/freeipa/issue/7900
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
systemd daemon must be reloaded after a config file is added, changed,
or removed. Provide a common API endpoint in ipaplatform.tasks.
Related: https://pagure.io/freeipa/issue/7860
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Kernel keyrings are not namespaced yet. Keyrings can leak into other
containers. Therefore keyrings should not be used in containerized
environment.
Don't configure Kerberos to use KEYRING ccache backen when a container
environment is detected by systemd-detect-virt --container.
Fixes: https://pagure.io/freeipa/issue/7807
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
NFS unit names were renamed.
Compatibility was maintained with older unit names
through symlinks. When these symlinks are removed
only new unit names work, so changing to using non-
symlink unit names is required.
Fixes: https://pagure.io/freeipa/issue/7783
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Since authselect 1.0.2, invoking an authselect command sequence
like this:
['authselect', 'sssd', '', '--force']
does not work: authselect barfs on the empty string arg and
errors out. We must only pass a features arg if we actually have
some text to go in it.
This broke uninstallation.
In all cases, features are now passed as separate arguments instead of one
argument separated by space.
Fixes: https://pagure.io/freeipa/issue/7776
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pylint 2.2.0 has a new checker for unnecessary pass statements. There is
no need to have a pass statement in functions or classes with a doc
string.
Fixes: https://pagure.io/freeipa/issue/7772
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Some incorrect errors are possible if a client installation
fails and a configuration rollback is required.
These include:
1. Unconfigured automount client failed: CalledProcessError(Command
['/usr/sbin/ipa-client-automount', '--uninstall', '--debug']
returned non-zero exit status 1: '')
Caused by check_client_configuration() not returning the correct
return value (2).
2. WARNING: Unable to revert to the pre-installation state ('authconfig'
tool has been deprecated in favor of 'authselect'). The default sssd
profile will be used instead.
The authconfig arguments would have been: authconfig --disableldap
--disablekrb5 --disablesssdauth --disablemkhomedir
If installation fails before SSSD is configured there is no state
to roll back to. Detect this condition.
3. An error occurred while removing SSSD's cache.Please remove the
cache manually by executing sssctl cache-remove -o.
Again, if SSSD is not configured yet then there is no cache to
remove. Also correct the missing space after the period.
https://pagure.io/freeipa/issue/7729
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Replace six.moves and six.StringIO/BytesIO imports with cannonical
Python 3 packages.
Note: six.moves.input behaves differently than builtin input function.
Therefore I left six.moves.input for now.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Python 2 had old style and new style classes. Python 3 has only new
style classes. There is no point to subclass from object any more.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When ipa client is uninstalled, the content of sysrestore.state
is read to restore the previous authselect profile and features.
The code should properly handle the case where sysrestore.state
contains the header for the authselect section, but the key=value
for profile and features are missing.
Fixes https://pagure.io/freeipa/issue/7657
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When ipa client was installed with the --hostname= option, it stores
[network]
hostname = (current hostname)
in /var/lib/ipa-client/sysrestore/sysrestore.state and changes the hostname
from (current hostname) to the value provided in --hostname.
During uninstall, the previous hostname is restored but the entry does
not get removed from sysrestore.state. As the uninstaller checks if all
entries from sysrestore.state have been restored, it warns that some
state has not been restored.
The fix calls statestore.restore_state() instead of statestore.get_state()
as this method also clears the entry.
https://pagure.io/freeipa/issue/7620
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Ensure that ipa.p11-kit is always world-readable.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
authselect needs to be configured with the 'with-sudo' feature (except
when ipa-client-install is called with the option --no-sudo).
https://pagure.io/freeipa/issue/7562
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In Fedora 29, the fedora-domainname.service has been renamed to
nis-domainname.service like on RHEL. The ipaplatform service module for
Fedora now only renames the service, when it detects the presence of
fedora-domainname.service.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1588192
Fixes: https://pagure.io/freeipa/issue/7582
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The site and module configs are split on Debian, server setup needs
to match that.
Fixes: https://pagure.io/freeipa/issue/7554
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The code currently parses the output of "authselect current" in order
to extract the current profile and options. Example:
$ authselect current
Profile ID: sssd
Enabled features:
- with-mkhomedir
It is easier to use the output of "authselect current --raw". Example:
$ authselect current --raw
sssd with-mkhomedir
Related to
https://pagure.io/freeipa/issue/7377
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The authconfig tool is deprecated and replaced by authselect. Migrate
FreeIPA in order to use the new tool as described in the design page
https://www.freeipa.org/page/V4/Authselect_migration
Fixes:
https://pagure.io/freeipa/issue/7377
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add absolute_import from __future__ so that pylint
does not fail and to achieve python3 behavior in
python2.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ctypes.util.find_library() is costly and slows down startup of ipa CLI.
ipaplatform.redhat.tasks now defers loading of librpm until its needed.
CFFI has been replaced with ctypes, too.
See: https://pagure.io/freeipa/issue/6851
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instead of a package conflict, freeIPA now uses an Apache config file to
enforce the correct wsgi module. The workaround only applies to Fedora
since it is the only platform that permits parallel installation of
Python 2 and Python 3 mod_wsgi modules. RHEL 7 has only Python 2 and
Debian doesn't permit installation of both variants.
See: https://pagure.io/freeipa/issue/7161
Fixes: https://pagure.io/freeipa/issue/7394
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Latest Travis CI image lacks IPv6 address on localhost. Add some
diagnostics and skip IPv6 tests in ipa-server-install when TRAVIS is
detected.
The hack will be removed as soon as it is no longer required to pass
automated testing.
https://pagure.io/freeipa/issue/7323
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Felipe Volpone <fbarreto@redhat.com>
This causes Firefox to report our CA certificate as not-trustworthy.
We were previously doing this correctly, however it slipped as an
error due to certificate refactoring.
https://pagure.io/freeipa/issue/7210
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Previously IPA would set the LimitNOFILE value to 8192 to increase
the number of concurrent clients. 389-ds-base does this by default
as of 1.3.7.0.
Remove the IPA-specific tuning and rely on the out-of-the-box
389-ds-base tuning.
Bump the required version of 389-ds-base to 1.3.7.0.
Any other tuning added by 389-ds-base will result in a
dirsrv.systemd.rpmsave file which admins will need to merge
in manually, like typical .rpmsave config changes.
https://pagure.io/freeipa/issue/6994
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
In cases when IPA is installed in two steps (external CA), it's
necessary to check (in the second step) if Dir. Server is
running before continue with the installation. If it's not,
start Directory Server.
https://pagure.io/freeipa/issue/6611
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
- Add check for IPv6 stack to upgrade process
- Change IPv6 checker to also check that localhost resolves to ::1
Part of fixes https://pagure.io/freeipa/issue/7083
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
