Before establishing trust with AD it is recommended in documentation
(and for many setups necessary) to create add DNS forwarder for AD domain.
Bind config supplied by ipa server has dnssec validation enabled.
If Windows server DNS does not have DNSSEC enabled with valid certificate,
then bind will not be able to use it as forwarder and trust will not be
established.
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
It was changed in f487233df0
for unknown reason. It did not influence test runs as
configure_dns_for_trust was made no-op in previous commit
1d9e1521c5. As now this commit is reverted,
configure_dns_for_trust is restored, invocation parameters also need to
be changed to initial values.
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This reverts commit 1d9e1521c5.
The reverted commit message states:
"Since DNS configuration is no longer needed for running trust tests,
this method's contents are removed."
In fact tests can run without DNS configuration only in case if test setup
has a DNS server with DNSSEC support and there are A records for Windows
machines and SRV records Windows AD services and this DNS server is used
as forwarder by bind. If one of these in not true
then tests fail when trying to establish trust (ipa trust-add) as --server
option is not used and ipa can not find the AD machine. If we specify
--server option and add Windows hosts to /etc/hosts, then trust will be
established, but then sssd will fail to find the host to talk for getting users
from AD. So for general case we should setup DNS forwarders prior to
establishing trust, as stated in
https://www.freeipa.org/page/Active_Directory_trust_setup
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Use methods:
- tasks.replica_install()
- tasks.client_install()
instead of custom methods.
Move ntp_pool/server to class scope.
Using teardown_method for cleanup.
Edit tasks.client_install to return result of installation.
Refactor install_replica task:
Add promote parameter to install_replica task.
Add ntp_args to install_client call and remove from
replica installation from tasks.install_replica while promoting.
Use case while not promoting has to have user allowed to enroll
a replica and server to contact in case autodiscovery does not work.
Related: https://pagure.io/freeipa/issue/7719
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
If the `ipa idrange-mod` command has been used show a notification that sssd.service needs restarting. It's needed for applying changes. E.g. after setup AD trust with a domain with more than 200000 objects (the highest RID > idm's default value, 200000) users with RIDs > 200000 are not able to login, the size needs to be increased via idrange-mod, but it makes an effect only after sssd restarting.
Implementation:
Notification was implemented via passing `ipalib.messages.ServiceRestartRequired` to `add_message` method in `ipaserver.plugins.idrange.idrange_mod.post_callback`.
Tests:
Added `messages` with sssd restart required (`ipalib.messages.ServiceRestartRequired`) to cases with idrange_mod where output is expected in `ipatests.test_xmlrpc.test_range_plugin.test_range'.
Fixes: https://pagure.io/freeipa/issue/7708
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The test was not executing ipa automember-rebuild --type hostgroup.
The test has been extended to execute it twice: Once when it needs to fail
because there is an orphan automember rule. Also after this orphan
automember rule has been removed. Here the test needs to succeed.
Fixes: https://pagure.io/freeipa/issue/7891
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Exercise ipa-replica-install with a hidden replica as source server and
creation of replication agreements between a hidden and an enabled
replica.
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
config-show only used to show enabled servers. Now also show hidden
servers on separate lines. Additionally include information about
KRA and DNS servers.
The augmented config-show output makes it easier to diagnose a cluster
and simplifies sanity checks.
Fixes: https://pagure.io/freeipa/issue/7892
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
A hidden replica is a replica that does not advertise its services via
DNS SRV records, ipa-ca DNS entry, or LDAP. Clients do not auto-select a
hidden replica, but are still free to explicitly connect to it.
Fixes: https://pagure.io/freeipa/issue/7892
Co-authored-by: Francois Cami <fcami@redhat.com>
Signed-off-by: Francois Cami <fcami@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
With 389-DS 1.4.0.21, automember plugin also gets triggered on modify ops
by default. This means that a member manually removed gets automatically
re-added by the plugin.
This behavior can be disabled by setting autoMemberProcessModifyOps=off in
the entry cn=Auto Membership Plugin,cn=plugins,cn=config.
Before 389-DS 1.4.0.21, it was possible to remove a member and the member
did not get re-added (unless automember-rebuild was called). This former
behavior can be forced by setting autoMemberProcessModifyOps=off.
This commit fixes the test and checks the behavior when
autoMemberProcessModifyOps=off and when autoMemberProcessModifyOps=on.
Fixes: https://pagure.io/freeipa/issue/7855
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
If the mask used during the installation is "too restrictive", ie.0027,
installing FreeIPA results in a broken server or replica.
Add two tests that expect an error message at install time to catch
too restrictive masks.
Related to: https://pagure.io/freeipa/issue/7193
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Use master.external_hostname instead of master.hostname for ssh connection
from controller machine to master. If hostname and external_hostname in
test_config.yml do no match then trying to establish ssh connection
was failing with "[Errno -2] Name or service not known".
Fixes https://pagure.io/freeipa/issue/7874
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Update the IP address validation to raise different error messages
for:
- inability to reach IP address from a DNS name
- missing PTR records for IP address
- asymmetric PTR / forward records
If multiple scenarios apply, indicate the first error (from list
above).
The code should now be a bit easier to follow. We first build dicts
of forward and reverse DNS relationships, keyed by IP address. Then
we check that entries for each iPAddressName are present in both
dicts. Finally we check for PTR-A/AAAA symmetry.
Update the tests to check that raised ValidationErrors indicate the
expected error.
Part of: https://pagure.io/freeipa/issue/7451
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Add a test with the following scenario:
ipa-server-install (with ca and pkinit enabled)
check that pkinit is properly enabled:
ipa-pkinit-manage status must return "enabled"
the KDC cert must be signed by IPA CA
Related to: https://pagure.io/freeipa/issue/7795
Reviewed-By: François Cami <fcami@redhat.com>
The test is performing topology changes on the master, then
waits for replication to replicate the changes and checks
the expected outcome on replica1.
The issue is that wait_for_replication was called on replica1,
but should be called on the master. This method is reliable only
if it is executed on the host where the modification was done.
Fixes https://pagure.io/freeipa/issue/7865
Reviewed-By: François Cami <fcami@redhat.com>
Some test suites for WebUI in Nightly PR configuration have timeouts without any reserve.
So these tests fails randomly.
Timeout values for these test was increased to {real duration} + ~30%
https://pagure.io/freeipa/issue/7864
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
The test TestUserPermissions::test_selinux_user_optimized is
testing the fix for SSSD issue 3819, but the fix is not
available in fedora 28. Hence mark the test as xfail when
executed on fedora <=28 (our nightly tests also run on fed 28).
For full ref: fixed in sssd 1.16.4, Fedora 28 provides
1.16.3-2.fc28 only, while Fedora 29 provides 2.0.0-3.fc29.
related ticket : https://pagure.io/SSSD/sssd/issue/3819
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This commit adds PKI nightly flow definition. It executes relevant
freeipa tests in order to catch PKI regressions.
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
389-ds-base has modified one option name in dsctl, and our test
test_uninstallation.py::TestUninstallBase::()::test_failed_uninstall
is still using the old option (--doit) instead of the new one
(--do-it).
Fixes: https://pagure.io/freeipa/issue/7856
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Web UI tests now don't require additional configuration to test certificates.
Self-signed certificates and CSR are generated on fly.
Next variables from ~/.ipa/ui_test.conf for now are deprecated:
- arbitrary_cert_path
- service_csr_path
- user_csr_path
Ticket: https://pagure.io/freeipa/issue/7843
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Move common LDAP commands to ldapmodify_dm() and ldapsearch_dm() helper
functions.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Integration tests are now using StartTLS with IPA's CA cert instead of
plain text connections.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Replace get_ldap_uri() + LDAPClient() with new LDAPClient constructors
like LDAPClient.from_realm().
Some places now use LDAPI with external bind instead of LDAP with simple
bind. Although the FQDN *should* resolve to 127.0.0.1 / [::1], there is
no hard guarantee. The draft
https://tools.ietf.org/html/draft-west-let-localhost-be-localhost-04#section-5.1
specifies that applications must verify that the resulting IP is a
loopback API. LDAPI is always local and a bit more efficient, too.
The simple_bind() method also prevents the caller from sending a
password over an insecure line.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The helper function realm_to_serverid() and realm_to_ldap_uri() are
useful outside the server installation framework. They are now in
ipapython.ipaldap along other helpers for LDAP handling in FreeIPA.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Manual revert of bbac233b5e
The assumption was that ldap.conf was hosed and it couldn't
tell what hostname to use so one was hardcoded. This code
doesn't explicitly test that ldap.conf is sane but it is
a nice side-effect I suppose.
https://pagure.io/freeipa/issue/5880
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This test checks if issuer DN is updated properly after CA is
renewed back from external-ca to self-signed
related ticket : https://pagure.io/freeipa/issue/7762
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
master.external_hostname was used to construct ldap url
which caused ldappasswd utility to exit with error due to host name
mismatch in client certificate. master.hostname should be used instead
as this name is used to generate certificate.
Fixes https://pagure.io/freeipa/issue/7844
Signed-off-by: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Resolve one level of symbolic links to support a dangling symlink as
keytab target. To prevent symlink attacks, only resolve symlink when the
symlink is owned by the current effective user and group, or by root.
Fixes: https://pagure.io/freeipa/issue/4607
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Web UI test_host is too heavy and causes timeout errors during night runs,
so it is moved to separate configuration.
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Scenario:
install a replica with DNS, with the replica part of a forward zone.
The replica installation should proceed successfully and avoid
trying to add a DNS record for the replica in the forward zone,
as the forward zone is not managed by IPA DNS.
Test added to nightly definitions.
Related to https://pagure.io/freeipa/issue/7369
Reviewed-By: Francois Cami <fcami@redhat.com>
Kernel keyrings are not namespaced yet. Keyrings can leak into other
containers. Therefore keyrings should not be used in containerized
environment.
Don't configure Kerberos to use KEYRING ccache backen when a container
environment is detected by systemd-detect-virt --container.
Fixes: https://pagure.io/freeipa/issue/7807
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Sergey Orlov
Christian Heimes
Tibor Dudlák
Oleg Kozlov
Thomas Woerner
François Cami
Florence Blanc-Renaud
Serhii Tsymbaliuk
Fraser Tweedale
Francisco Trivino
Mohammad Rizwan Yusuf
Rob Crittenden