In case there is a successful OTP authentication attempt, register it as
an operation note on the BIND operation in LDAP. 389-ds then will print
a multi-factor authentication note in both access and security logs
according to https://www.port389.org/docs/389ds/design/mfa-operation-note-design.html
Fixes: https://pagure.io/freeipa/issue/5169
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Samba 4.20 will change name extension of the private libraries from
'samba4' to 'private-samba'. Detect private extension through configure
step and make sure to use the right library name in Makefile.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
In November 2022, Microsoft introduced a new PAC signature type called
"extended KDC signature" (or "full PAC checksum"). This new PAC
signature will be required by default by Active Directory in July 2023
for S4U requests, and opt-out will no longer be possible after October
2023.
Support for this new signature type was added to MIT krb5, but it relies
on the new KDB API introduced in krb5 1.20. For older MIT krb5 versions,
the code generating extended KDC signatures cannot be backported as it
is without backporting the full new KDB API code too. This would have
too much impact to be done.
As a consequence, krb5 packages for Fedora 37, CentOS 8 Stream, and RHEL
8 will include a downstream-only update adding the
krb5_pac_full_sign_compat() function, which can be used in combination
with the prior to 1.20 KDB API to generate PAC extended KDC signatures.
Fixes: https://pagure.io/freeipa/issue/9373
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add basic krb5 1.20 integration without RBCD support. RBCD will come in
a separate series.
Fixes: https://pagure.io/freeipa/issue/9083
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
New calls, getorigbyusername() and getorigbygroupname(), are added to
libsss_nss_idmap. They allow to query the AD specific attributes for a
user or a group directly. Besides a minor performance benefit it helps
to avoid issues if there are users and groups with the same name and the
group is not a user-private group but a real group with members.
Fixes: https://pagure.io/freeipa/issue/9127
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
MIT Kerberos 1.20 changes DAL interface around PAC record issuance:
sign_authdata callback is removed and replaced with issue_pac one.
The signatures are different and logic changed as well.
Prepare for KDB version 9 by moving PAC implementation into separate
source files. ipa_kdb_mspac.c is left with most of the common code.
FreeIPA supports sign_authdata callback since KDB version 6, move current
implementation to ipa_kdb_mspac_v6.c.
KDB version 8 actually changed sign_authdata interface and we accounted
to that in ipa_kdb.c with a stub that re-uses v6 version. Keep it as it
is right now.
Finally, add KDB version 9 stub files. Compiling against MIT Kerberos
1.20 does not work yet, thus explicit #error message in ipa_kdb.c. This
will be worked on later.
Related: https://pagure.io/freeipa/issue/9083
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
PAC_ATTRIBUTES_INFO PAC buffer allows both client and KDC to tell
whether a PAC structure was requested by the client or it was provided
by the KDC implicitly. Kerberos service then can continue processing or
deny access in case client explicitly requested to operate without PAC.
Fixes: https://pagure.io/freeipa/issue/9031
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
CVE-2020-25721 mitigation: KDC must provide the new PAC_REQUESTER_SID
buffer with ObjectSID value associated with the requester's principal.
The mitigation only works if NDR library supports the PAC_REQUESTER_SID
buffer type. In case we cannot detect it at compile time, a warning will
be displayed at configure stage.
Fixes: https://pagure.io/freeipa/issue/9031
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
CVE-2020-25721 mitigation: KDC must provide the new HAS_SAM_NAME_AND_SID
buffer with sAMAccountName and ObjectSID values associated with the
principal.
The mitigation only works if NDR library supports the
PAC_UPN_DNS_INFO_EX buffer type. In case we cannot detect it at compile
time, a warning will be displayed at configure stage.
Fixes: https://pagure.io/freeipa/issue/9031
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Unit tests for ipa-extdom-extop plugin use nss_files.so.2 module to test the
functionality instead of relying on SSSD API or nss_sss.so.2 module. The latter
two cannot be used in build environment.
nss_files.so.2 always tries to open /etc/passwd and /etc/group. In past, we
overloaded 'fopen()' to change the path to opened file but this stops working
after glibc consolidate file opening in nss_files with the code starting at
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=299210c1fa67e2dfb564475986fce11cd33db9ad,
this method is not usable anymore and builds against glibc 2.31.9000+ fail in
cmocka unit test execution in Rawhide.
Apply an alternative approach that uses a new user namespace to unshare the
test from its parent and chroot to the test data where expected /etc/passwd and
/etc/group are provided. This method works only on Linux, thus only run the
unit test on Linux.
In case unshare() or chroot() fail, we have to skip tests that use
nss_files.so.2.
Fixes: https://pagure.io/freeipa/issue/8437
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The init/systemd directory is for server only and not part of
CLIENT_ONLY builds.
It's necesary to run pre/post installation hooks to make systemd aware
of new files.
Fixes: https://pagure.io/freeipa/issue/8367
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Use OpenSSL's HMAC API instead of NSS.
Fixes: Fixes: https://pagure.io/freeipa/issue/6857
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
"Kerberos principal expiration" is set in UTC and when server is in
different timezone, the time difference between timezone is respected by
the IPA server/client for Kerberos authentication.
The problem is due to mktime() assuming default time zone but since we
parse the time using Zulu (UTC+0) timezone, mktime() forces current time
zone offset added.
The method is using mktime() and comparing to the current time obtained
with time(NULL). According to its man page, mktime is considering the
time as local time:
The mktime() function converts a broken-down time structure, expressed
as local time, to calendar time representation.
Instead mktime() we should use timegm(). The problem is that it is
non-standard GNU extension and it is recommended (in the man page for
timegm(3)) to avoid its use. An alternative is to set TZ=UTC, call
mktime(), unset TZ, but since we are running in a multi-threaded
environment this is problematic.
On the other hand, we already rely on GNU extensions and enable them
with -D_DEFAULT_SOURCE=1, so use of timegm() is enabled already.
The fix, therefore, is to use timegm() instead of mktime() in
daemons/ipa-slapi-plugins/ipa-pwd-extop/prepost.c in two places where we
first do 'strptime()' with Zulu time zone (in ipapwd_pre_bind() and
ipapwd_write_krb_keys()).
Fixes: https://pagure.io/freeipa/issue/8362
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Also add runstatedir autoconf var. IPA requires autoconf 2.59. The
variable will be available with autoconf 2.70.
Fixes: https://pagure.io/freeipa/issue/8272
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
BUILD_SELINUX_POLICY needs to be defined outside of ENABLE_SERVER
conditional block.
Fixes:
\# ./configure --disable-server
...
configure: error: conditional "BUILD_SELINUX_POLICY" was never defined.
Usually this means the macro was only invoked conditionally.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Hook up the new policy to autoconf and automake.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Refactor nsswitch operations in ipa-extdom-extop plugin to allow use
of timeout-enabled nsswitch calls provided by libsss_nss_idmap.
Standard POSIX nsswitch API has no way to cancel requests which may
cause ipa-extdom-extop requests to hang far too long and potentially
exhaust LDAP server workers. In addition, glibc nsswitch API iterates
through all nsswitch modules one by one and with multiple parallel
requests a lock up may happen in an unrelated nsswitch module like
nss_files.so.2.
A solution to the latter issue is to directly load nss_sss.so.2 plugin
and utilize it. This, however, does not solve a problem with lack of
cancellable API.
With SSSD 1.16.1, libsss_nss_idmap provides a timeout-enabled variant of
nsswitch API that is directly integrated with SSSD client side machinery
used by nss_sss.so.2. As result, this API can be used instead of loading
nss_sss.so.2 directly.
To support older SSSD version, both direct loading of nss_sss.so.2 and
new timeout-enabled API are supported by this changeset. An API to
abstract both is designed to be a mix between internal glibc nsswitch
API and external nsswitch API that libsss_nss_idmap mimics. API does not
expose per-call timeout. Instead, it allows to set a timeout per
nsswitch operation context to reduce requirements on information
a caller has to maintain.
A choice which API to use is made at configure time.
In order to test the API, a cmocka test is updated to explicitly load
nss_files.so.2 as a backend. Since use of nss_sss.so.2 would always
depend on availablility of SSSD, predictable testing would not be
possible without it otherwise. Also, cmocka test does not use
nss_wrapper anymore because nss_wrapper overrides higher level glibc
nsswitch API while we are loading an individual nsswitch module
directly.
As result, cmocka test overrides fopen() call used by nss_files.so.2 to
load /etc/passwd and /etc/group. An overridden version changes paths to
/etc/passwd and /etc/group to a local test_data/passwd and
test_data/group. This way we can continue testing a backend API for
ipa-extdom-extop with the same data as with nss_wrapper.
Fixes https://pagure.io/freeipa/issue/5464
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
Samba 4.7 tightens up smbldap API by making 'struct smbldap_state' an
opaque. This means ipa-sam module cannot anymore directly set its
LDAP bind callback.
Use new smbldap API to set the LDAP bind callback.
Fixes https://pagure.io/freeipa/issue/6877
Reviewed-By: Martin Basti <mbasti@redhat.com>
With Samba 4.7 access to ldapsam internal structures will not be
available for external applications. FreeIPA's ipasam module was using
those for own needs. Now it needs to migrate to proper own private
structure.
Given that we anyway need to implement many missing functions like
pdb_update_sam_account() callback with FreeIPA-specific logic,
piggybacking on ldapsam structures is not needed anymore.
Fixes https://pagure.io/freeipa/issue/6877
Reviewed-By: Martin Basti <mbasti@redhat.com>
Replace empty string with a single space in the third argument of
`AC_CHECK_LIB` (`action-if-found`) where applicable.
Empty string in the argument causes `AC_CHECK_LIB` to use the default
action when a library is found which includes adding the library to `LIBS`,
which specifies libraries to be linked in every binary and library in the
project.
This fixes libkrad, liblber, libldap_r and libsss_nss_idmap being linked to
every binary and library in IPA, even where unused.
https://pagure.io/freeipa/issue/6846
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Certificates can be assigned to multiple user so the extdom plugin must
use sss_nss_getlistbycert() instead of sss_nss_getnamebycert() and
return a list of fully-qualified user names.
Due to issues on the SSSD side the current version of lookups by
certificates didn't work at all and the changes here won't break
existing clients.
Related to https://pagure.io/freeipa/issue/6826
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: David Kupka <dkupka@redhat.com>
This patch add a certauth plugin which allows the IPA server to support
PKINIT for certificates which do not include a special SAN extension
which contains a Kerberos principal but allow other mappings with the
help of SSSD's certmap library.
Related to https://pagure.io/freeipa/issue/4905
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: David Kupka <dkupka@redhat.com>
Add explicit NSPR_CFLAGS and NSS_CFLAGS where NSPR_LIBS and NSS_LIBS is
used.
Use DIRSRV_CFLAGS rather than hardcode -I/usr/include/dirsrv.
Append NSPR_CFLAGS to DIRSRV_CFLAGS in ./configure as slapi-plugin.h
includes nspr.h.
Reviewed-By: Pavel Vomacka <pvomacka@redhat.com>
