For each CA server, a Dogtag user account is created for the ACME
service to use to authenticate to the CA subsystem. This commit
cleans up the Dogtag account upon server uninstallation.
The user deletion behaviour is extracted to a common method used for
both ACME RA account deletion (on uninstall) and removal of the
temporary admin account (during replica install).
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
pki-server-10.9.0-0.3 relocates the ACME schema LDIF file. Look for
the file in both the old and new locations to smooth the transition.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add the ipa-acme-manage command which can be used to enable or
disable the IPA ACME service. It must be used on each server. In
the future we will implement deployment-wide configuration
(including enable/disable) of the ACME service via IPA API, with
configuration stored in and replicated by LDAP. But until then, we
need a simple command for administrators to use.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When deploying ACME set up configsources.conf to retrieve engine
configuration from engine.conf. In the initial configuration, the
ACME service is disabled (i.e. it will refuse to service requests).
A subsequent commit will add command(s) for flipping the ACME
service on or off (on a per-server basis). Later we will move to
LDAP configuration so that management of the ACME service is
deployment-wide.
The default configuration also disables issuance of wildcard
certificates.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a default certificate profile to be used with the ACME service.
The profile requires the (Dogtag) user interacting with the CA to be
a member of the (Dogtag) "ACME Agents" group. For each CA server we
create a dedicated ACME agent account, make it a member of this
group, and configure the ACME issuer component to use that account.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add an ACL to allow ACME agents to revoke certificates. Although
the operation "execute" sounds quite scary (as though it would have
a wide scope), in fact it only allows revocation (and unrevocation).
See CertResource.java and base/ca/shared/conf/acl.properties in the
Dogtag source.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The ACME certificate profile will require the (Dogtag) user
interacting with the CA to be a member of the (Dogtag) "ACME Agents"
group. Therefore for each CA server, as part of the ACME setup
routine create a dedicated ACME agent account and make it a member
of this group.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a method for creating a group (if it does not exist). This will
be used to create a group for ACME RA accounts.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Extract the user and group membership creation behaviour from
DogtagInstance.setup_admin to its own method, 'create_user'. The
ACME setup routine will use it to create ACME RA accounts.
The @staticmethod decorator documents that 'create_user' does not
use 'self' or 'cls'. I preferred not to lift to a top-level def
because it is very much a "DogtagInstance" behaviour.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When configuring the CA, create, configure and deploy the PKI ACME
service instance. This includes creation (if necessary) of the LDAP
container object heirarchy in which ACME-related objects will be
stored.
Dogtag ACME RA account management will be added in a subsequent
commit, removing the use of the 'uid=admin' account (which as of
this commit just has a bogus password).
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
PKIConnection now defaults to specifying verify=True. We've introduced
a new parameter, cert_paths, to specify additional paths (directories or
files) to load as certificates. Specify the IPA CA certificate file so
we can guarantee connections succeed and validate the peer's certificate.
Point to IPA CA certificate during pkispawn
Bump pki_version to 10.9.0-0.4 (aka -b2)
Fixes: https://pagure.io/freeipa/issue/8379
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1849155
Related: https://github.com/dogtagpki/pki/pull/443
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1426572
Signed-off-by: Alexander Scheel <ascheel@redhat.com>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Update 'ca' plugin doc to mention which permissions are required for
the various commands. Also mention that CAs must first be disabled
before they can be deleted.
Part of: https://fedorahosted.org/freeipa/ticket/5011
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Currently ca-del disables the target CA before deleting it.
Conceptually, this involves two separate permissions: modify and
delete. A user with delete permission does not necessarily have
modify permission.
As we head toward enforcing IPA permissions in Dogtag, it is
necessary to decouple disablement from deletion, otherwise the
disable operation shall fail if the user does not have modify
permission. Although it introduces an additional step for
administrators, the process is consistent, required permissions map
1:1 to the operations, and the error messages make it clear what
needs to happen (i.e. disable first).
Part of: https://fedorahosted.org/freeipa/ticket/5011
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A failed ipa-ca-install left my installation in an inconsistent
state. Then, 'ipa-server-install --uninstall' also failed when
is_crlgen_enabled() tried to read ipa-pki-proxy.conf, which was
missing.
Update is_crlgen_enabled() to handle missing ipa-pki-proxy.conf, by
raising InconsistentCRLGenConfigException instead of RuntimeError.
As a result, missing ipa-pki-proxy.conf is handled gracefully
because the calling code already catches
InconsistentCRLGenConfigException.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ipa cert-show wrongly displays all certs as Revoked.
The dogtag plugin code is checking if the JSON data received
from dogtag contains a RevocationReason with:
if 'RevocationReason' in resp:
but the value can be None.
Replace the check with
if 'RevocationReason' in resp and esp['RevocationReason'] is not None:
as this will execute the code only if there is a value
and it is not None.
Fixes: https://pagure.io/freeipa/issue/8394
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Update ra.get_certificate to use the Dogtag REST API. This change
is being done as part of the Dogtag GSS-API authentication effort
because the servlet-based method expects an internal Dogtag user.
It is less intrusive to just change FreeIPA to call the REST API
instead (which is also part of an existing ticket).
Depends on https://pagure.io/dogtagpki/issue/2601 (which was merged
and released long ago).
Part of: https://pagure.io/freeipa/issue/3473
Part of: https://pagure.io/freeipa/issue/5011
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Outside of virtual commands themselves there is no way to evaluate
access to perform a virtual operation. Such a capability will be
needed for Dogtag-based certificate request validation using
Kerberos proxy credentials.
Add the 'check_operation_access' method for explicit virtual
operation access checks. Refactor 'VirtualCommand.check_access()'
to use it.
Part of: https://pagure.io/freeipa/issue/5011
Part of: https://pagure.io/freeipa/issue/6423
Reviewed-By: Christian Heimes <cheimes@redhat.com>
According to datetime.utcfromtimestamp() method documentation[1],
this and similar methods fail for dates past 2038 and can be replaced by
the following expression on the POSIX compliant systems:
datetime(1970, 1, 1, tzinfo=timezone.utc) + timedelta(seconds=timestamp)
Make sure to use a method that at least allows to import the timestamps
properly to datetime objects on 32-bit platforms.
[1] https://docs.python.org/3/library/datetime.html#datetime.datetime.utcfromtimestamp
Fixes: https://pagure.io/freeipa/issue/8378
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
sshd 8.2+ now supports the "Include" keyword in sshd_config and
ships by default /etc/ssh/sshd_config with
"Include /etc/ssh/sshd_config.d/*"
As fedora 32 provides a config file in that directory (05-redhat.conf) with
ChallengeResponseAuthentication no
that is conflicting with IPA client config, ipa-client-install now needs
to make its config changes in a drop-in file read before 05-redhat.conf
(the files are read in lexicographic order and the first setting wins).
There is no need to handle upgrades from sshd < 8.2: if openssh-server
detects a customisation in /etc/ssh/sshd_config, it will not update
the file but create /etc/ssh/sshd_config.rpmnew and ask the admin
to manually handle the config upgrade.
Fixes: https://pagure.io/freeipa/issue/8304
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Some places have to use the old name because it's part of the stable API
or stable LDAP attributes.
See: https://tools.ietf.org/id/draft-knodel-terminology-01.html
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The term "CA renewal master" is a fixed term in FreeIPA and cannot
easily be replaced with an alternative term. At least we should use the
term consistently.
See: https://tools.ietf.org/id/draft-knodel-terminology-01.html
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The message displayed before is now limited to the OTP
sync form, for which it was written originally.
A new message is introduced for the PW reset form,
which clarifies the usage of the OTP field.
Fixes: https://pagure.io/freeipa/issue/5628
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
We do two things:
1. Fix the xpath for AJP connector verification. An AJP connector is
one which has protocol="AJP/1.3", NOT one that has port="8009". An
AJP connector can exist on any port and port 8009 can have any
protocol. Secrets only make sense on AJP connectors, so make the
xpath match the existing comment.
2. Add some background in-line documentation about AJP secret
provisioning. This should help future developers understand why this
was added to IPA and what limitations there are in what PKI or IPA
can do. Most notably, explain why Dogtag can't upgrade the AJP
connector to have a secret in the general case.
Signed-off-by: Alexander Scheel <ascheel@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The 'cert_request' command accumulates DNS names from the CSR,
before checking that all IP addresses in the CSR are reachable from
those DNS names. Before adding a DNS name to the set, we check that
that it corresponds to the FQDN of a known host/service principal
(including principal aliases). When a DNS name maps to a
"alternative" principal (i.e. not the one given via the 'principal'
argument), this check was not being performed correctly.
Specifically, we were looking for the 'krbprincipalname' field on
the RPC response object directly, instead of its 'result' field.
To resolve the issue, dereference the RPC response to its 'result'
field before invoking the '_dns_name_matches_principal' subroutine.
Fixes: https://pagure.io/freeipa/issue/8368
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add builder for association adder dialog which allows to override behavior of the component.
Replace default implementation with a custom one for idoverrideuser.
Replace text filter with 'ID view' select box in the idoverrideuser dialog.
Ticket: https://pagure.io/freeipa/issue/8335
Signed-off-by: Serhii Tsymbaliuk <stsymbal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
It should be ipanthomedirectorydrive and not ipanthomedirectoryrive.
This fixes showing the field in Web UI and also should fix CLI as it
probably never worked.
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Under some search conditions (in particular, when user is
specified), the CA sub-search of cert-find command throws an error
on CA-less deployments. Do not execute the CA sub-search on CA-less
deployments.
Fixes: https://pagure.io/freeipa/issue/8369
Reviewed-By: Christian Heimes <cheimes@redhat.com>
It was found that if an account was created with a name corresponding to
an account local to a system, such as 'root', was created via IPA, such
account could access any enrolled machine with that account, and the local
system privileges. This also bypass the absence of explicit HBAC rules.
root principal alias
-------------------
The principal "root@REALM" is now a Kerberos principal alias for
"admin". This prevent user with "User Administrator" role or
"System: Add User" privilege to create an account with "root" principal
name.
Modified user permissions
-------------------------
Several user permissions no longer apply to admin users and filter on
posixaccount object class. This prevents user managers from modifying admin
acounts.
- System: Manage User Certificates
- System: Manage User Principals
- System: Manage User SSH Public Keys
- System: Modify Users
- System: Remove Users
- System: Unlock user
``System: Unlock User`` is restricted because the permission also allow a
user manager to lock an admin account. ``System: Modify Users`` is restricted
to prevent user managers from changing login shell or notification channels
(mail, mobile) of admin accounts.
New user permission
-------------------
- System: Change Admin User password
The new permission allows manipulation of admin user password fields. By
default only the ``PassSync Service`` privilege is allowed to modify
admin user password fields.
Modified group permissions
--------------------------
Group permissions are now restricted as well. Group admins can no longer
modify the admins group and are limited to groups with object class
``ipausergroup``.
- System: Modify Groups
- System: Remove Groups
The permission ``System: Modify Group Membership`` was already limited.
Notes
-----
Admin users are mostly unaffected by the new restrictions, except for
the fact that admins can no longer change krbPrincipalAlias of another
admin or manipulate password fields directly. Commands like ``ipa passwd
otheradmin`` still work, though. The ACI ``Admin can manage any entry``
allows admins to modify other entries and most attributes.
Managed permissions don't install ``obj.permission_filter_objectclasses``
when ``ipapermtargetfilter`` is set. Group and user objects now have a
``permission_filter_objectclasses_string`` attribute that is used
by new target filters.
Misc changes
------------
Also add new exception AlreadyContainsValueError. BaseLDAPAddAttribute
was raising a generic base class for LDAP execution errors.
Fixes: https://pagure.io/freeipa/issue/8326
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1810160
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ipa-replica-install currently accepts both --setup-ca and *-cert-file
even though the options should be mutually exclusive (either install
CA-less with *-cert-file options or with a CA).
Add a check enforcing the options are mutually exclusive.
Fixes: https://pagure.io/freeipa/issue/8366
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
/etc/named.conf is now owned by IPA. The file is overwritten on
installation and all subsequent updates. All user modification will be
lost. Config file creation and update use the same code paths.
This simplifies upgrade process a lot. There is no errprone fiddling
with config settings any more.
During upgrade there is a one-time backup of named.conf to
named.conf.ipa-backup. It allows users to salvage their customization
and move them to one of two user config files which are included by
named.conf.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The upgrade step used to add "dnssec-validation no" to named.conf IFF
named.conf did not contain "dnssec-validation" option at all. The
option has been moved to 'ipa-options-ext.conf' in IPA 4.8.7. The function
only removes the upgrade state.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Commit a5cbdb57e5 introduced a bug when
updating IPA from 4.8.6 to 4.8.7. NAMED_DNSSEC_VALIDATION template
variable was not declared.
Fixes: https://pagure.io/freeipa/issue/8363
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
During upgrade, if discrepancies are detected in Certmonger tracking
request configuration we remove and re-create tracking requests.
The default behaviour of the CAInstance and KRAInstance
stop_tracking_certificates() method is to stop certmonger after the
requests have been removed. This behaviour results in an
unnecessary restart of certmonger and has also been observed to
cause problems. For example, subsequent certmonger operations have
to start the certmonger process and can fail because certmonger is
not yet properly initialised (manifesting as D-Bus errors).
Suppress the unnecessary restart(s) of certmonger during tracking
request update.
Related: https://pagure.io/freeipa/issue/8186
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
In the migration case of replica installation, if the CA server is
an older version it may not support the ipa-ca.$DOMAIN dnsName in
the HTTP cert (it is a special case in the cert_request command).
Therefore if the request fails, try it again without the
ipa-ca.$DOMAIN dnsName.
Part of: https://pagure.io/freeipa/issue/8186
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Second part of adding support to manage IPA as a user from a trusted
Active Directory forest.
Treat user ID overrides as members of groups and roles.
For example, adding an Active Directory user ID override as a member of
'admins' group would make it equivalent to built-in FreeIPA 'admin'
user.
We already support self-service operations by Active Directory users if
their user ID override does exist. When Active Directory user
authenticates with GSSAPI against the FreeIPA LDAP server, its Kerberos
principal is automatically mapped to the user's ID override in the
Default Trust View. LDAP server's access control plugin uses membership
information of the corresponding LDAP entry to decide how access can be
allowed.
With the change, users from trusted Active Directory forests can
manage FreeIPA resources if the groups are part of appropriate roles or
their ID overrides are members of the roles themselves.
Fixes: https://pagure.io/freeipa/issue/7255
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
First part of the required changes to merge a plugin to manage IPA as
a trusted Active Directory user.
It is not possible to omit ID view in IPA API but a client might specify
empty ID view. Up right now the empty view was considered an error. This
prevented Web UI from resolving ID overrides in a group member adder
dialog.
Default to 'Default Trust View' if the ID view is None or empty string
(''). Do this only for user ID overrides, as we do not support adding
group ID overrides as group members in a plugin to manage IPA as a
trusted Active Directory user[1].
Being a group member means an object in LDAP must have an object class
that allows 'memberOf' attribute because 389-ds 'memberof' plugin will
attempt to link back to the object from the group. Allow use of
'nsMemberOf' object class in ID overrides.
Fixes: https://pagure.io/freeipa/issue/7255
[1] https://github.com/abbra/freeipa-adusers-admins
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When using `ipa -e in_server=True console` on IPA master, the whole IPA
framework is loaded in the same process ('ipa console'). The context
defined for this configuration is 'cli'. Some trust-related operations
need to load Samba bindings and guard itself to 'lite' and 'server'
contexts.
Upon reviewing these cases I came to conclusion that these guards are
unnecessary. It is enough to require that the context is in the server
code.
Allow these operations if we are operating in server mode. This allows
to debug trust-related issued directly in the IPA console on IPA trust
controllers.
Signed-of-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Upgrade path to add additional include to named.conf is not handled.
Remove bindkeys-file directive from named config
The ISC DVL service was shut down (https://www.isc.org/bind-keys/).
BIND versions since April 2017 (i.e. 9.9.10, 9.10.5, 9.11.1 and later)
include a hard-coded copy of the root KSK which gets updates automatically
according to RFC 5011.
Move dnssec-enable directive to custom named config
Move comment named config being managed by FreeIPA to the top
Move settings which could be changed by administrators to
ipa-options-ext.conf. Settings defined there are sole responsibility of the
administrator. We do not check if they might collide with our settings in
named.conf.
Fixes: https://pagure.io/freeipa/issue/8287
Co-authored-by: Peter Keresztes Schmidt <carbenium@outlook.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
DatabaseError exceptions with 'account inactivated' message are turned
into 401 Unauthorized errors. The problem occurs when a user is disabled
but has a valid cookie.
Other DatabaseErrors are turned into 503 Service Unavailable. They
usually occur when LDAP server is not available or broken.
Fixes: https://pagure.io/freeipa/issue/8352
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
