DS does not enable plugins unless nsslapd-dynamic-plugins is enabled or
DS is restarted. The DNA plugin creates its configuration entries with
some delay after the plugin is enabled.
DS is now restarted after the DNA plugin is enabled so it can create the
entries while Dogtag and the rest of the system is installing. The
updater `update_dna_shared_config` no longer blocks and waits for two
times 60 seconds for `posix-ids` and `subordinate-ids`.
Fixes: https://pagure.io/freeipa/issue/9358
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Constrained delegation target may already be configured by default.
Related: https://pagure.io/freeipa/issue/9354
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Replace comparisons of "if value" with "if value is not None"
in order to handle 0.
Add a short reference to the man page to indicat that a cert
or request retention time of 0 means remove at the next
execution.
Also indicate that the search time limit is in seconds.
Fixes: https://pagure.io/freeipa/issue/9325
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Configures PKI to remove expired certificates and non-resolved
requests on a schedule.
This is geared towards ACME which can generate a lot of certificates
over a short period of time but is general purpose. It lives in
ipa-acme-manage because that is the primary reason for including it.
Random Serial Numbers v3 must be enabled for this to work.
Enabling pruning enables the job scheduler within CS and sets the
job user as the IPA RA user which has full rights to certificates
and requests.
Disabling pruning does not disable the job scheduler because the
tool is stateless. Having the scheduler enabled should not be a
problem.
A restart of PKI is required to apply any changes. This tool forks
out to pki-server which does direct writes to CS.cfg. It might
be easier to use our own tooling for this but this makes the
integration tighter so we pick up any improvements in PKI.
The "cron" setting is quite limited, taking only integer values
and *. It does not accept ranges, either - or /.
No error checking is done in PKI when setting a value, only when
attempting to use it, so some rudimentary validation is done.
Fixes: https://pagure.io/freeipa/issue/9294
Signed-off-by: Rob Crittenden rcritten@redhat.com
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The installer is currently creating the samba domain object
before it adds the RID base and secondary RID base. As a consequence,
there is a window during which the sidgen plugin is active but
unable to generate SIDs (it requires the samba domain object to
find the domain SID and RID base to know where to start from).
There is no direct impact except the error log of 389ds that reports
ERR - get_ranges - [file ipa_sidgen_common.c, line 276]: Failed to convert LDAP entry to range struct.
This fix configures the RID base and secondary RID base before the
domain object is created, thus removing this window.
Fixes: https://pagure.io/freeipa/issue/9309
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
> Emitted when a local variable is accessed before its assignment took
place. Assignments in try blocks are assumed not to have occurred when
evaluating associated except/finally blocks. Assignments in except
blocks are assumed not to have occurred when evaluating statements
outside the block, except when the associated try block contains a
return statement.
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
`pipes` module is deprecated as of Python 3.11.
https://docs.python.org/3/library/pipes.html#module-pipes:
> Deprecated since version 3.11, will be removed in version 3.13: The
pipes module is deprecated (see PEP 594 for details).
IPA code used only `quote` function from `pipes` that in turn is
the alias for `shlex.quote` since Python 3.3:
9bce311ea4
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Most of `cyclic-import` issues reported by Pylint are false-positive
and they are already handled in the code, but several ones are the
actual errors.
Fixes: https://pagure.io/freeipa/issue/9232
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The newer version of pylint has fixed false positives and
does not need anymore these suppressions:
- global-variable-not-assigned
- invalid-sequence-index
- no-name-in-module
- not-callable
- unsupported-assignment-operation
Related: https://pagure.io/freeipa/issue/9278
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The config file /var/kerberos/krb5kdc/kdc.conf is customized
during IPA server installation with a list of supported
encryption types.
In FIPS mode, camellia encryption is not supported and should
be filtered out. Because of a typo in the filtering method,
the camellia encryptions are appended while they should not.
Fix the typo (camelia vs camellia) in order to filter properly.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The PKCS12 MAC requires PKCS12KDF which is not an approved FIPS
algorithm and cannot be supported by the FIPS provider.
Do not require mac verification in FIPS mode: append the option
--nomacver to the command openssl pkcs12 used to extract a pem file
or a key from a p12 file.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The IPA location system relies on DNS record priorities in order to give
higher precedence to servers from the same location. For Kerberos, this
is done by redirecting generic SRV records (e.g.
_kerberos._udp.[domain].) to location-aware records (e.g.
_kerberos._udp.[location]._locations.[domain].) using CNAMEs.
This commit applies the same logic for URI records. URI location-aware
record were created, but there were no redirection from generic URI
records. It was causing them to be ignored in practice.
Kerberos URI and TXT records have the same name: "_kerberos". However,
CNAME records cannot coexist with any other record type. To avoid this
conflict, the generic TXT realm record was replaced by location-aware
records, even if the content of these records is the same for all
locations.
Fixes: https://pagure.io/freeipa/issue/9257
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The default ID generators used by PKI might change in the
future, so to preserve the current behavior the installation
code has been updated to explicitly use the legacy ID
generators by default.
Signed-off-by: Endi S. Dewata <edewata@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-cacert-manage prune is removing the expired certs one
at a time and this may result in verifying that one of
the expired certs is still valid.
As a consequence, ipa-cacert-manage prune always fails
when more than 1 cert are expired.
To avoid the issue, remove all the expired certs in a single
pass, and validate only the ones that would remain after full
pruning.
Fixes: https://pagure.io/freeipa/issue/9244
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If an existing group policy lacks a password grace limit
update it to -1 on upgrade.
Fixes: https://pagure.io/freeipa/issue/9212
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There are currently three sets of CA schema changes applied
in ipa-server-upgrade:
* addition of ACME schema
* addition of certificate profile schema
* addition of lightweight CA schema
None of these require a restart of the CA to be supported.
There is an issue in schema parsing such that it doesn't handle
X-ORIGIN properly. A difference is detected and a change applied
but no change is recorded in LDAP so every time upgrade is
run it thinks a CA restart is needed. The CA is not quick to
restart so avoiding one is best, particularly when the update is
run as part of an rpm transaction where a user with an itchy finger
may think things have hung and break out of it.
https://github.com/389ds/389-ds-base/issues/5366 was
filed to track this.
Related: https://pagure.io/freeipa/issue/9204
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
With the fix for https://pagure.io/freeipa/issue/9171,
nsds5replicaUpdateInProgress is now handled as a boolean.
One remaining occurrence was still handling it as a string
and calling lower() on its value.
Replace with direct boolean comparison.
Fixes: https://pagure.io/freeipa/issue/9218
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
In the memory check failure message, add a hint to the administrator
that they can use the --skip-mem-check flag to skip the check.
Related: https://pagure.io/freeipa/issue/8404
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
PKI 10.10 unconditionally added an upgrade script for the AJP
connector which replaced the AJP secret regardless of tomcat
version. It replaced requiredSecret with secret. IPA expects
the attribute by version so this could make the secrets out of
date and/or have connectors with both secrets and different
values.
PKI commit e70373ab131aba810f318c1d917896392b49ff4b has since
been reverted but there may be servers with both secrets still.
On next IPA upgrade clean them up.
Also allow re-writing ipa-pki-proxy.conf in case the secret
changes to ensure they remain in sync.
Fixes: https://pagure.io/freeipa/issue/9176
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
nsds5replicaUpdateInProgress is defined in LDAP schema as a boolean.
Now that IPA API is able to properly map booleans to the python
bool type, this attribute is not a string any more and
comparisons can be done directly based on its real type.
The code in ipa-replica-install was reading nsds5replicaUpdateInProgress
and calling value.tolower() == 'true' but should now use
value == True instead.
Related: https://pagure.io/freeipa/issue/9171
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
In IPA framework we don't properly convert to Python bool type and just
return a string (TRUE or FALSE). This can be seen with many boolean
attributes, like
Bool('idnsallowdynupdate?',
cli_name='dynamic_update',
label=_('Dynamic update'),
doc=_('Allow dynamic updates.'),
attribute=True,
default=False,
autofill=True
),
in 'ipa dnszone-show':
> > > api.Command.dnszone_show('ipa.test')['result']['idnsallowdynupdate']
['TRUE']
This is because we don't have the reverse (from LDAP to Python) mapping
for the LDAP boolean OID 1.3.6.1.4.1.1466.115.121.1.7.
When Web UI asks for the entry, it gets back JSON output that contains
this 'TRUE' value:
"idnsallowdynupdate": [
"TRUE"
],
Add proper mapping from LDAP to Python bool type. With this, a simple
'checkbox' type can be used in Web UI instead of a complex radio-box
setup.
Note that when IPA API is asked to return raw values, 'TRUE' and 'FALSE'
still returned. These are the actual LDAP boolean attribute values. Care
needs to be done in tests:
- if output is from a command with --raw option, 'TRUE' or 'FALSE'
should be expected
- if output if from a normal (non-raw) command, True or False would be
returned
Fixes: https://pagure.io/freeipa/issue/9171
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The graceperiod plugin was only being enabled on new
installations. Enable also on upgrade.
Loading a new plugin requires a restart. Do so if a
new one is configured.
Fixes: https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Treat this like other failed login attributes and don't
replicate them.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add support for bind grace limiting per
https://datatracker.ietf.org/doc/html/draft-behera-ldap-password-policy-06
389-ds provides for alternative naming than the draft, using those
instead: passwordGraceUserTime for pwdGraceUserTime and
passwordGraceLimit for pwdGraceLoginLimit.
passwordGraceLimit is a policy variable that an administrator
sets to determine the maximum number of LDAP binds allowed when
a password is marked as expired. This is suported for both the
global and per-group password policies.
passwordGraceUserTime is a count per-user of the number of binds.
When the passwordGraceUserTime exceeds the passwordGraceLimit then
all subsequent binds will be denied and an administrator will need
to reset the user password.
If passwordGraceLimit is less than 0 then grace limiting is disabled
and unlimited binds are allowed.
Grace login limitations only apply to entries with the objectclass
posixAccount or simplesecurityobject in order to limit this to
IPA users and system accounts.
Some basic support for the LDAP ppolicy control is enabled such that
if the ppolicy control is in the bind request then the number of
remaining grace binds will be returned with the request.
The passwordGraceUserTime attribute is reset to 0 upon a password
reset.
user-status has been extended to display the number of grace binds
which is stored centrally and not per-server.
Note that passwordGraceUserTime is an operational attribute.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add the --subid option to client, server and replica installers.
This option allows to configure authselect with the sssd
profile + with-subid feature, in order to have SSSD setup as
a datasource for subid in /etc/nsswitch.conf.
The default behavior remains unchanged: without the option,
/etc/nsswitch.conf keeps the line subid: files
Fixes: https://pagure.io/freeipa/issue/9159
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
So that it prints out a valid command:
- replace "ipa-replica-manage del" by "ipa server-del" (only domain-level1 is now supported)
- the commands needs to be run on a working server, not on the host where ipa-replica-install failed
Fixes: https://pagure.io/freeipa/issue/9162
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
KDC configuration in /var/kerberos/krb5kdc/kdc.conf is generated from
the template in install/share/kdc.conf.template. Master key encryption
type specified there is used to bootstrap the master key in LDAP
database. Once it is done, actual deployment does not rely on the
master_key_type value anymore. The actual master key(s) get loaded from
LDAP database where they stored in a BER-encoded format, preserving all
parameters, including encryption type.
This means we can safely migrate to AES256-SHA2 as the default master
key encryption type for new installations. Replicas will get their
master key encryption type details from the server they were provisioned
from.
MIT Kerberos supports AES256-SHA2 since 1.15 (2015), meaning RHEL 7.4 is
the earliest supported version as it provides krb5 1.15.1. Current
supported RHEL 7 version is RHEL 7.9. Since RHEL 6 already cannot be
used as a replica to IPA 4.5+ due to a domain level 1 upgrade, this
change does not affect old releases.
Migration from the previously deployed master key encryption type is
described by MIT Kerberos upstream in
http://web.mit.edu/kerberos/krb5-latest/doc/admin/advanced/retiring-des.html#the-database-master-key
One would need to use '-x ipa-setup-override-restrictions' to allow
the `kdb5_util` utility to modify the data over IPA KDB driver.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Cleanup up no longer used Pylint's disables where possible.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.11.0 extends consider-using-in check to work for
attribute access.
> To check if a variable is equal to one of many values,combine the
values into a tuple and check if the variable is contained "in" it
instead of checking for equality against each of the values.This
is faster and less verbose.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9.0 introduced new checker which was a subset of
arguments-differ:
> Used when a method parameter has a different name than in the
implemented interface or in an overridden method.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> New checker consider-using-dict-items. Emitted when iterating over
dictionary keys and then indexing the same dictionary with the key
within loop body.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9.0 introduced new checker:
> Emitted when a private member of a class is defined but not used
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
__remove_lightweight_ca_key_retrieval_custodia has been added in
8700101d9, but it was never used.
Caught by Pylint:
```
ipaserver/install/cainstance.py:1308: [W0238(unused-private-member),
CAInstance.__remove_lightweight_ca_key_retrieval_custodia]
Unused private member
`CAInstance.__remove_lightweight_ca_key_retrieval_custodia(self)`)
```
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
__convert_to_gssapi_replication has been added in a0bfbec19 and
then removed in ce2bb47cc without clean up.
Found by Pylint:
```
ipaserver/install/krbinstance.py:589: [W0238(unused-private-member),
KrbInstance.__convert_to_gssapi_replication] Unused private member
`KrbInstance.__convert_to_gssapi_replication(self)`)
```
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
RHEL 9 system-wide crypto policies aim at eventual removal of SHA-1 use.
Due to bootstrapping process, force explicitly supported encryption
types in kdc.conf or we may end up with AES128-SHA1 and AES256-SHA2 only
in FIPS mode at bootstrap time which then fails to initialize kadmin
principals requiring use of AES256-SHA2 and AES128-SHA2.
Camellia ciphers must be filtered out in FIPS mode, we do that already
in the kerberos.ldif.
At this point we are not changing the master key encryption type to
AES256-SHA2 because upgrading existing deployments is complicated and
at the time when a replica configuration is deployed, we don't know what
is the encryption type of the master key of the original server as well.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The example text included a trailing dot which isn't actually
allowed in a system hostname (just DNS). Remove the suggestion
to include it and strip off any trailing dot so that the install
can proceed.
Related: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The refactor change 9094dfc had a slight error where the
user-input provided value in input wasn't being validated. Only
the command-line or the current FQDN was being verified so
if the FQDN was bad any value input by the user was being skipped.
Fixes: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is no use-case to keep a restored server in a hidden
state. It can be re-marked as hidden once the installation is
recovered from the restore. So mark all restored services as
enabled so they are visible to existing clients during the
remaining recovery.
Fixes: https://pagure.io/freeipa/issue/9095
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The timer was only being enabled during package installation
if IPA was configured. So effectively only on upgrade.
Add as a separate installation step after the ccache directory
is configured.
Fixes: https://pagure.io/freeipa/issue/9107
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pylint 2.9 thinks that __add_principal is a class-level method that is
unused. It is a local function inside one of class methods and is used
directly inside that method.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
OpenLDAP 2.6+ finally deprecated -h and -p options in all its command
line tools. They are not allowed anymore and cause ldap* tools to stop
hard with 'unknown option' error.
Fix this by always using -H url option instead. Deriving default value
for -H url from the configuration file still works, it is only -h and -p
that were deprecated.
See also: https://bugs.openldap.org/show_bug.cgi?id=8618
Fixes: https://pagure.io/freeipa/issue/9106
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
I can only guess to the original purpose of this override. I
believe it was because this is called in the installer prior
to Apache being set up. The expectation was that this would
only be called locally. It predates the RestClient class.
RestClient will attempt to find an available service. In this
case, during a CA installation, the local server is not
considered available because it lacks an entry in
cn=masters. So it will never be returned as an option.
So by overriding the port to 8443 the remote connection will
likely fail because we don't require that the port be open.
So instead, instantiate a RestClient and see what happens.
There are several use-cases:
1. Installing an initial server. The RestClient connection
should fail, so we will fall back to the override port and
use the local server. If Apache happens to be running with
a globally-issued certificate then the RestClient will
succeed. In this case if the connected host and the local
hostname are the same, override in that case as well.
2. Installing as a replica. In this case the local server should
be ignored in all cases and a remote CA will be picked with
no override done.
3. Switching from CA-less to CA-ful. The web server will be
trusted but the RestClient login will fail with a 404. Fall
back to the override port in this case.
The motivation for this is trying to install an EL 8.x replica
against an EL 7.9 server. 8.5+ includes the ACME service and
a new profile is needed which doesn't exist in 7. This was
failing because the RestClient determined that the local server
wasn't running a CA so tried the remote one (7.9) on the override
port 8443. Since this port isn't open: failure.
Chances are that adding the profile is still going to fail
because again, 7.9 lacks ACME capabilities, but it will fail in
a way that allows the installation to continue.
I suspect that all of the overrides can similarly handled, or
handled directly within the RestClient class, but for the sake
of "do no harm" I'm only changing this instance for now.
https://pagure.io/freeipa/issue/9100
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
