For now formatting is applied for bare messages before translating.
This breaks python-brace-format and message becomes untranslatable
at all.
Fixes: https://pagure.io/freeipa/issue/7586
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
For now formatting is applied for bare messages before translating.
This breaks python-brace-format and message becomes untranslatable
at all.
Fixes: https://pagure.io/freeipa/issue/7586
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Translation objects have support for format(). This allows to
get rid of unicode() which has been removed in Python3.
Also some messages to be translated at request time should
not use format()
Fixes: https://pagure.io/freeipa/issue/7586
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
For now formatting is applied for bare messages before translating.
This breaks python-brace-format and message becomes untranslatable
at all.
Also some messages to be translated at request time should
not use format().
Fixes: https://pagure.io/freeipa/issue/7586
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
For now formatting is applied for bare messages before translating.
This breaks python-brace-format and message becomes untranslatable.
Fixes: https://pagure.io/freeipa/issue/7586
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Translation objects have support for format(). This allows to
get rid of unicode() which is deprecated in Python3.
Fixes: https://pagure.io/freeipa/issue/7586
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-replica-install only set ca_host in its temporary
/etc/ipa/default.conf, when it wasn't installing a replica with CA. As a
consequence, the replica installer was picking a random CA server from
LDAP.
Always set the replication peer as ca_host. This will ensure that the
installer uses the same replication peer for CA. In case the replication
peer is not a CA master, the installer will automatically pick another
host later.
See: https://pagure.io/freeipa/issue/7566
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
The server installer had no console logger set so print
statements were used for communication. Now that a logger
is enabled the extra prints need to be dropped.
A number of logger.info statements have been upgraded
to debug since they do not need to appear on the console
by default.
https://pagure.io/freeipa/issue/6760
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This otherwise returns a syntax error if trying to set
an empty value.
Related: https://pagure.io/freeipa/issue/6760
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The server installation and uninstallation overlaps both the
server and client installers. The output could be confusing
with a server uninstall finishing with the message:
The ipa-client-install command was successful
This was in part due to the fact that the server was not
configured with a console format and verbose was False which
meant that no logger messages were displayed at all.
In order to suppress client installation errors and avoid
confusion add a list of errors to ignore. If a server install
was not successful and hadn't gotten far enough to do the
client install then we shouldn't complain loudly about it.
https://pagure.io/freeipa/issue/6760
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
On multiple occasions, SRV query answers were not properly sorted by
priority. Records with same priority weren't randomized and shuffled.
This caused FreeIPA to contact the same remote peer instead of
distributing the load across all available servers.
Two new helper functions now take care of SRV queries. sort_prio_weight()
sorts SRV and URI records. query_srv() combines SRV lookup with
sort_prio_weight().
Fixes: https://pagure.io/freeipa/issue/7475
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Increase the WSGI daemon worker process count from 2 processes to 5
processes. This allows IPA RPC to handle more parallel requests. The
additional processes increase memory consumption by approximante 250 MB
in total.
Since memory is scarce on 32bit platforms, only 64bit platforms are
bumped to 5 workers.
Fixes: https://pagure.io/freeipa/issue/7587
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The command description is taken from python docstring. Thus
commands should have them and should include the callings of
gettext to be translated.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The schema compat plugin is disabled on upgrades but it is
possible that it is not configured at all and this will
produce a rather nasty looking error message.
Check to see if it is configured at all before trying to
disable it.
https://pagure.io/freeipa/issue/6610
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Sometimes named-pkcs11 is not being stopped or reloaded during
uninstall and it causes a lot of problems while testing, for example,
backup and restore tests are failing because of ipa-server-install
fails on checking DNS step.
Fixes backup/restore tests runs. Maybe something else.
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Fix 994f71ac8a was incomplete. Under some
circumstancs the DM hash and CA keys were still retrieved from two different
machines.
Custodia client now uses a single remote to upload keys and download all
secrets.
Fixes: https://pagure.io/freeipa/issue/7518
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
If this is enabled it can cause a deadlock with SSSD trying
to look up entries and it trying to get data on AD users
from SSSD.
When reading the entry from LDIF try to get the camel-case
nsslapd-pluginEnabled and fall back to the all lower-case
nsslapd-pluginenabled if that is not found. It would be nice
if the fetch function was case sensitive but this is likely
overkill as it is, but better safe than blowing up.
Upon restoring it will always write the camel-case version.
https://pagure.io/freeipa/issue/6721
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
PR https://github.com/freeipa/freeipa/pull/1747 added the first template
for FreeIPA client package. The template file was added to server
templates, which broke client-only builds.
The template is now part of a new subdirectory for client package shared
data.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa cert_find command has an option called --subject.
The option is documented as --subject=STR Subject.
It is expected that a --subject option searches by X.509 subject field but it does not do so.
It searches for CN not cert subject. Hence changing content of --subject help option.
Resolves: https://pagure.io/freeipa/issue/7322
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The server, replica, and client installer now print the current version
number on the console, before the actual installer starts. It makes it
easier to debug problems with failed installations. Users typically post
the console output in a ticket.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The password was only indirectly validated when trying to
disable replication agreements for the restoration.
Only validate the password if the IPA configuration is available
and dirsrv is running.
https://pagure.io/freeipa/issue/7136https://pagure.io/freeipa/issue/7535
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The site and module configs are split on Debian, server setup needs
to match that.
Fixes: https://pagure.io/freeipa/issue/7554
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
And since Fedora 28 dropped support for non-64bit, hardcode default LIBARCH as 64.
Fixes: https://pagure.io/freeipa/issue/7555
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
kadmind doesn't start without it, and Debian doesn't ship it by default.
Fixes: https://pagure.io/freeipa/issue/7553
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
OpenLDAP has deprecated PORT and HOST stanzes in ldap.conf. The presence
of either option causes FreeIPA installation to fail. Refuse
installation when a deprecated and unsupported option is present.
Fixes: https://pagure.io/freeipa/issue/7418
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
LDAP connections no longer depend on sane settings in global ldap.conf
and use good default settings for cert validation, CA, and SASL canonization.
https://pagure.io/freeipa/issue/7418
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When IPA is installed with an externally signed CA, the master installer
does not publish the whole cert chain in /usr/share/ipa/html/ca.crt (but
/etc/ipa/ca.crt contains the full chain).
If a client is installed with a One-Time Password and without the
--ca-cert-file option, the client installer downloads the cert chain
from http://master.example.com/ipa/config/ca.crt, which is in fact
/usr/share/ipa/html/ca.crt. The client installation then fails.
Note that when the client is installed by providing admin/password,
installation succeeds because the cert chain is read from the LDAP server.
https://pagure.io/freeipa/issue/7526
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-backup and ipa-restore now use GnuPG 2 for asymmetric encryption, too.
The gpg2 command behaves a bit different and requires a gpg2 compatible
config directory. Therefore the --keyring option has been deprecated.
The backup and restore tools now use root's GPG keyring by default.
Custom configuration and keyring can be used by setting GNUPGHOME
environment variables.
Fixes: https://pagure.io/freeipa/issue/7560
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The /usr/bin/gpg command is old, legacy GnuPG 1.4 version. The
recommended version is GnuPG 2 provided by /usr/bin/gpg2. For simple
symmentric encryption, gpg2 is a drop-in replacement for gpg.
Fixes: https://pagure.io/freeipa/issue/7560
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Upstream ticket was raised for issuing an warning message
whenever data in ipa vault is overwritten.
In Bugzilla(1339129) its agreed upon that Current behavior is consistent
with other IPA commands. None of ipa mod commands asks for confirmation
and therefore it should be the same here.
But to document, that vault can contain only one value in ipa help vault.
This PR addresses the changes agreed in Bugzilla.
Resolves: https://pagure.io/freeipa/issue/5922
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-advise config-fedora-authconfig produces a script with authconfig
instructions for configuring Fedora 18/19 client with IPA server
without use of SSSD. Fedora 18 and 19 are not supported any more,
so the plugin could be removed.
Resolves: https://pagure.io/freeipa/issue/7533
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Now radius proxy plugin allows to add more then one radius server
into radius proxy but the first one from ldap response is being
parsed (you can see ./daemons/ipa-optd/parse.c).
So this kind of behaviour is a bug, as it was determined on IRC.
This patch removes possibility to add more then one radius server
into radius proxy.
Pagure: https://pagure.io/freeipa/issue/7542
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
Early return prevented adding last warning message in the method:
"Ignoring these warnings and proceeding with removal"
And thus `check_master_removal` in `test_server_del` did not work.
https://pagure.io/freeipa/issue/7517
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
mod_ssl's limiting of client cert verification depth was causing
the replica installs to fail when master had been installed with
external CA since the SSLCACertificateFile was pointing to a file
with more than one certificate. This is caused by the default
SSLVerifyDepth value of 1. We set it to 5 as that should be
just about enough even for possible sub-CAs.
https://pagure.io/freeipa/issue/7530
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Allow services to be members of the groups, like users and other groups
can already be.
This is required for use cases where such services aren't associated
with a particular host (and thus, the host object cannot be used to
retrieve the keytabs) but represent purely client Kerberos principals to
use in a dynamically generated environment such as Kubernetes.
Fixes: https://pagure.io/freeipa/issue/7513
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add --skip-host-check option to ipa service-add command to allow
creating services without corresponding host object. This is needed to
cover use cases where Kerberos services created to handle client
authentication in a dynamically generated environment like Kubernetes.
Fixes: https://pagure.io/freeipa/issue/7514
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The director /etc/httpd/alias was created by mod_nss. Since FreeIPA no
longer depends on mod_nss, the directory is no longer created on fresh
systems.
Note: At first I wanted to move the file to /var/lib/ipa/private/ or
/var/lib/httpd/. SELinux prevents write of httpd_t to ipa_var_lib_t. I'm
going to move the file after a new SELinux policy is available.
See: https://pagure.io/freeipa/issue/7529
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The NSSDatabase object doesn't know the format of an NSS database
until the database is created so an explcit call to nssdb.create_db.
https://pagure.io/freeipa/issue/7469
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Introduce server installation constants similar to the client
but only tie in SERVER_NOT_CONFIGURED right now.
For the case of not configured don't spit out the "See <some log>
for more information" because no logging was actually done.
In the case of ipa-backup this could also be confusing if the
--log-file option was also passed in because it would not be
used.
https://pagure.io/freeipa/issue/6843
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
When a user with sufficient permissions creates a group using ipa
group-add and then deletes it again with group-del ipa gives an
Insufficient access error, but still deletes the group.
This is due to a need to remove an associaed password policy for the
group. However, a password policy might be inaccessible to the user
(created by a more powerful admin) and there is no way to check that it
exists with current privileges other than trying to remove it.
Seeing a Python exceptions in the Apache log without explanation is
confusing to many users, so add a warning message that explains what
happens here.
Fixes: https://pagure.io/freeipa/issue/6884
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This will allow for whitespace around the separator and changes the
default space separator into white space (space + tabs) to be more
generic and work better on Ubuntu which uses tabs in its Apache
configuration.
https://pagure.io/freeipa/issue/7490
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
We added the separator to the regex in set_directive_lines to avoid
grabbing just a prefix. This doesn't allow for whitespace around
the separator.
For the Apache case we expected that the separator would be just
spaces but it can also use tabs (like Ubuntu 18). Add a special
case so that passing in a space separator is treated as whitespace
(tab or space).
https://pagure.io/freeipa/issue/7490
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The password was only indirectly validated when trying to
disable replication agreements for the restoration.
https://pagure.io/freeipa/issue/7136
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The installer reports the CA configuration that will be used,
including whether the CA is self-signed or externally-signed.
Installation with external CA takes two steps. The first step
correctly reports the externally signed configuration (like the
above), but the second step reports a self-signed configuration.
The CA *is* externally signed, but the configuration gets reported
incorrectly at step 2. This could confuse the administrator. Fix
the message.
Fixes: https://pagure.io/freeipa/issue/7523
Reviewed-By: Christian Heimes <cheimes@redhat.com>
