Under some conditions, ipa config-show and several other commands were
failing with error message:
ERROR: invalid 'PKINIT enabled server': all masters must have IPA master role enabled
Amongst others the issue can be caused by a broken installation, when
some services are left in state 'configuredServices'. The problem even
block uninstallation or removal of replicas. Now configured servers are
also consider valid providers for associated roles.
A new test verifies that config-show works with hidden and configured HTTP
service.
Remark: The original intent of the sanity check is no longer clear to me. I
think it was used to very that all services can be started by ipactl.
Since ipactl starts hidden, configured, and enabled services, the new
logic reflect the fact, too.
Fixes: https://pagure.io/freeipa/issue/7929
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Look for SELinux violation after installing a master with CA, KRA, and
DNS with DNSSEC. The test does not fail yet, because there are known
SELinux violations.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The p11-kit configuration injects p11-kit-proxy into all NSS databases.
Amongst other p11-kit loads SoftHSM2 PKCS#11 provider. This interferes
with 389-DS, certmonger, Dogtag and other services. For example certmonger
tries to open OpenDNSSEC's SoftHSM2 token, although it doesn't use it at
all. It also breaks Dogtag HSM support testing with SoftHSM2.
IPA server does neither need nor use SoftHSM2 proxied by p11-kit.
Related: https://pagure.io/freeipa/issue/7810
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
* override ipa_ca_key_size
* test with SHA512withRSA
Related: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On non-usrmerge systems (e.g., Debian), bash, mv, cp, cat, tail,
keyctl, and gzip live in /bin, not /usr/bin.
On usrmerge systems, /bin is a symlink to /usr/bin (or vice versa), so
this has no effect.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
With the latest NFS changes:
* systemd NFS-related unit files
* configuration from /etc/sysconfig/nfs to /etc/nfs.conf
testing NFS client {manual, ipa-client-automount} configuration
has become paramount.
This extends the existing automount location test and must be
run nightly.
Fixes: https://pagure.io/freeipa/issue/7805
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Peter Cech <pcech@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The signing key for IPA's CA certificate now uses a 3072 bit RSA key by
default.
According to https://www.keylength.com/, NIST 800-57 Part 1 Rev. 4
recommends 3072 bit RSA keys for keys that are used beyond 2030 for 128 bit
strength.
Fixes: https://pagure.io/freeipa/issue/6790
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
IPA used to write a custom /etc/resolv.conf. On Fedora and RHEL,
NetworkManager is typically maintaining resolv.conf. On reboot or
restart of the service, NM overwrites the custom settings.
On systems with NM enabled, the DNS server installer now drops a config
file into NM's global config directory and delegates resolv.conf to NM.
On systems without NM, fall back to create /etc/resolv.conf directly.
Fixes: https://pagure.io/freeipa/issue/7900
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Install CA with 4096bit RSA key and SHA-384 signature.
Fixes: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
IPA no verifies that intermediate certs of external CAs have a basic
constraint path len of at least 1 and increasing.
Fixes: https://pagure.io/freeipa/issue/7877
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Tests in test_trust.py were organized in ten classes, one for each trust type,
requiring ten cycles of ipaserver installation/uninstallation and the full test
run lasted for about 5500 seconds.
There is no need in reinstallation of ipaserver between establishing different
types of trust.
I moved all tests to sinle class, preserving test logic.
Additional changes:
* TestEnforcedPosixADTrust was totally removed as it was duplicate of
TestPosixADTrust
* code of repeated checks was moved to methods
* A task was cretated for cleaning up DNS configuration changes made for
establishing trust
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
AD hosts can now be extracted from list in respective class attributes and host
domain names -- from properties provided by multihost plugin (host.domain.name).
Also removed conditional skips of tests when test configuration contains only
part of required AD machines as this feature never worked:
multihost plugin removes all machines from config which are not explicitly
requested.
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Tests for AD trust can use three types (roles) of AD machines:
forest root, subdomain and tree domain.
All those machines were placed in one domain object of multihost configuration,
though they all have different domain names.
This is bad as we can not use domain attributes provided by multihost plugin
like host.domain.name and host.domain.basedn and others and need to reimplement
them, evaluating domain name from host.hostname.
And if we accidently used those properties it would lead to difficult to locate
errors (we would use same domain name for all AD hosts).
I modified multihost fixture function mh() to allow creating several AD domains.
As multihost plugin does not support requesting multiple domains with the same type,
I had to introduce new domain types: AD_SUBDOMAIN and AD_TREEDOMAIN.
Also there was a error in mh() which forced user to provide all three AD
machines when only one was needed (value from test class property num_ad_domains
was applied to subdomains and treedomains requirement).
I changed this behavior and now additional AD machines are specified with
properties num_ad_subdomains and num_ad_treedomains.
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Test was expecting that when trust is established with forest root, than all
three AD domains should be found when quering trust-find for that domain.
Actually only root domain and its subdomain should be returned, without
the tree domain.
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
TestExternalTrustWithRootDomain was inherited from ADTrustSubdomainBase
This caused that external trust was checked two times with subdomain
and was not checked with root domain.
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
It was changed in f487233df0
for unknown reason. It did not influence test runs as
configure_dns_for_trust was made no-op in previous commit
1d9e1521c5. As now this commit is reverted,
configure_dns_for_trust is restored, invocation parameters also need to
be changed to initial values.
Related to https://pagure.io/freeipa/issue/7889
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test case for hidden replica restore is flaky and sometimes fails.
The general issues is covered by upstream bug 7894.
See: https://pagure.io/freeipa/issue/7894
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: François Cami <fcami@redhat.com>
Use methods:
- tasks.replica_install()
- tasks.client_install()
instead of custom methods.
Move ntp_pool/server to class scope.
Using teardown_method for cleanup.
Edit tasks.client_install to return result of installation.
Refactor install_replica task:
Add promote parameter to install_replica task.
Add ntp_args to install_client call and remove from
replica installation from tasks.install_replica while promoting.
Use case while not promoting has to have user allowed to enroll
a replica and server to contact in case autodiscovery does not work.
Related: https://pagure.io/freeipa/issue/7719
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Exercise ipa-replica-install with a hidden replica as source server and
creation of replication agreements between a hidden and an enabled
replica.
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
ipa-{adtrust|ca|dns|kra}-install on a hidden replica also installs the
new service as hidden service.
Fixes: https://pagure.io/freeipa/issue/7892
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
DNSSec key master and CA renewal master can't be hidden. There must be
at least one enabled server available for each role, too.
Fixes: https://pagure.io/freeipa/issue/7892
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Fixes: https://pagure.io/freeipa/issue/7892
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
config-show only used to show enabled servers. Now also show hidden
servers on separate lines. Additionally include information about
KRA and DNS servers.
The augmented config-show output makes it easier to diagnose a cluster
and simplifies sanity checks.
Fixes: https://pagure.io/freeipa/issue/7892
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Move tests for DNS and roles into helper methods to make them reusable.
Fixes: https://pagure.io/freeipa/issue/7892
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
A hidden replica is a replica that does not advertise its services via
DNS SRV records, ipa-ca DNS entry, or LDAP. Clients do not auto-select a
hidden replica, but are still free to explicitly connect to it.
Fixes: https://pagure.io/freeipa/issue/7892
Co-authored-by: Francois Cami <fcami@redhat.com>
Signed-off-by: Francois Cami <fcami@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Add new integration tests for the new command ipa-crlgen-manage,
and test_cmdline tests.
Related to: https://pagure.io/freeipa/issue/5803
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
If the mask used during the installation is "too restrictive", ie.0027,
installing FreeIPA results in a broken server or replica.
Add two tests that expect an error message at install time to catch
too restrictive masks.
Related to: https://pagure.io/freeipa/issue/7193
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Use master.external_hostname instead of master.hostname for ssh connection
from controller machine to master. If hostname and external_hostname in
test_config.yml do no match then trying to establish ssh connection
was failing with "[Errno -2] Name or service not known".
Fixes https://pagure.io/freeipa/issue/7874
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The fix for https://pagure.io/freeipa/issue/7868 introduced
a tuple-based OS version management method (osinfo.version_number)
by Christian Heimes.
Convert all occurrences of osinfo.version_id in ipatests to
osinfo.version_number then remove osinfo.version_id.
Related to: https://pagure.io/freeipa/issue/7873
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add a test with the following scenario:
ipa-server-install (with ca and pkinit enabled)
check that pkinit is properly enabled:
ipa-pkinit-manage status must return "enabled"
the KDC cert must be signed by IPA CA
Related to: https://pagure.io/freeipa/issue/7795
Reviewed-By: François Cami <fcami@redhat.com>
The test is performing topology changes on the master, then
waits for replication to replicate the changes and checks
the expected outcome on replica1.
The issue is that wait_for_replication was called on replica1,
but should be called on the master. This method is reliable only
if it is executed on the host where the modification was done.
Fixes https://pagure.io/freeipa/issue/7865
Reviewed-By: François Cami <fcami@redhat.com>
The test TestUserPermissions::test_selinux_user_optimized is
testing the fix for SSSD issue 3819, but the fix is not
available in fedora 28. Hence mark the test as xfail when
executed on fedora <=28 (our nightly tests also run on fed 28).
For full ref: fixed in sssd 1.16.4, Fedora 28 provides
1.16.3-2.fc28 only, while Fedora 29 provides 2.0.0-3.fc29.
related ticket : https://pagure.io/SSSD/sssd/issue/3819
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa users having default semanage context were optimized out.
This test checks if those users are listed.
related ticket : https://pagure.io/SSSD/sssd/issue/3819
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Verify that ipa-server-install with external CA and CA type ms-cs adds
the correct extension to the CSR.
Fixes: https://pagure.io/freeipa/issue/7548
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
389-ds-base has modified one option name in dsctl, and our test
test_uninstallation.py::TestUninstallBase::()::test_failed_uninstall
is still using the old option (--doit) instead of the new one
(--do-it).
Fixes: https://pagure.io/freeipa/issue/7856
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Move common LDAP commands to ldapmodify_dm() and ldapsearch_dm() helper
functions.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Integration tests are now using StartTLS with IPA's CA cert instead of
plain text connections.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The helper function realm_to_serverid() and realm_to_ldap_uri() are
useful outside the server installation framework. They are now in
ipapython.ipaldap along other helpers for LDAP handling in FreeIPA.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This test checks if issuer DN is updated properly after CA is
renewed back from external-ca to self-signed
related ticket : https://pagure.io/freeipa/issue/7762
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Scenario:
install a replica with DNS, with the replica part of a forward zone.
The replica installation should proceed successfully and avoid
trying to add a DNS record for the replica in the forward zone,
as the forward zone is not managed by IPA DNS.
Test added to nightly definitions.
Related to https://pagure.io/freeipa/issue/7369
Reviewed-By: Francois Cami <fcami@redhat.com>
Two tests in test_intgration/test_authselect.py were marked as
skipped in c5cdd5a5f0 due to removing of --no-sssd and --no-ac options.
Tests are not needed any more.
Fixes: https://pagure.io/freeipa/issue/7841
Signed-off-by: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
authselect changed pam_systemd session from optional to required. When
the HBAC rule allow_all is disabled and replaced with more fine grained
rules, loginsi now to fail, because systemd's user@.service is able to
create a systemd session.
Add systemd-user HBAC service and a HBAC rule that allows systemd-user
to run on all hosts for all users by default. ipa-server-upgrade creates
the service and rule, too. In case the service already exists, no
attempt is made to create the rule. This allows admins to delete the
rule permanently.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1643928
Fixes: https://pagure.io/freeipa/issue/7831
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-pkinit-manage enable was failing when run on a replica
without a CA instance.
Add a test with the following scenario:
- install a replica with --no-pkinit
- check that the KDC cert is self signed
- call ipa-pkinit-manage enable
- check that the KDC cert is signed by IPA CA
Related to https://pagure.io/freeipa/issue/7795
Reviewed-By: Francois Cami <fcami@redhat.com>
Create and execute the server and client smart card advise scripts.
See: See: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test is failing when calling (on the replica)
ipa-replica-manage re-initialize --from <master>
because the tool needs to resolve master.
The test does not set /etc/resolv.conf on the replica, as a
consequence it relies on whatever DNS server is configured in
your test environment prior to launching the test, and makes
the test unreliable.
In PR-CI env, /etc/resolv.conf points to the machine hosting
the replica vm, which is unable to resolve master.ipa.test.
The fix is modifying the replica's /etc/resolv.conf to use the
master as DNS.
Fixes https://pagure.io/freeipa/issue/7778
Reviewed-By: Christian Heimes <cheimes@redhat.com>
