Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Operations in FIPS mode make impossible use of NTLMSSP when
authenticating to trusted Active Directory domain controllers because
RC4 cipher is not allowed. Instead, Kerberos authentication have to be
used. We switched to enforce Kerberos authentication when communicating
with trusted domains' domain controllers everywhere.
Kerberos library uses system wide configuration which in IPA defaults to
resolving location of KDCs via DNS SRV records. Once trust is
established, SSSD will populate a list of closest DCs and provide them
through the KDC locator plugin. But at the time the trust is established
performing DNS SRV-based discovery of Kerberos KDCs might fail due to
multiple reasons. It might also succeed but point to a DC that doesn't
know about the account we have to use to establish trust.
One edge case is when DNS SRV record points to an unreachable DC,
whether due to a firewall or a network topology limitations. In such
case an administrator would pass --server <server> option to
'ipa trust-add' or 'ipa trust-fetch-domains' commands.
'ipa trust-fetch-domains' runs a helper via oddjobd. This helper was
already modified to support --server option and generated custom
krb5.conf overlay to pin to a specific AD DC. However, this
configuration was removed as soon as we finished talking to AD DCs.
With switch to always use Kebreros to authenticate in retrieval of the
topology information, we have to use the overlay everywhere as well.
Convert the code that generated the overlay file into a context that
generates the overlay and sets environment. Reuse it in other
trust-related places where this matters.
Oddjob helper runs as root and can write to /run/ipa for the krb5.conf
overlay.
Server side of 'ipa trust-add' code calls into ipaserver/dcerpc.py and
runs under ipaapi so can only write to /tmp. Since it is a part of the
Apache instance, it uses private /tmp mounted on tmpfs.
Fixes: https://pagure.io/freeipa/issue/8664
Related: https://pagure.io/freeipa/issue/8655
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Commit 72fb4e6 introduced a regression. SSSD_USER.chown() raises
ValueError instead of KeyError when SSSD user does not exist.
Fixes: https://pagure.io/freeipa/issue/8516
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
New classes for user and group names provide a convenient way to access
the uid and primary gid of a user / gid of a group. The classes also
provide chown() and chgrp() methods to simplify common operations.
The wrappers are subclasses of builtin str type and behave like ordinary
strings with additional features. The pwd and grp structs are retrieved
once and then cached.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This is common to both client and server. Start with whether the
client or server is configured.
https://pagure.io/freeipa/issue/8384
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Also add runstatedir autoconf var. IPA requires autoconf 2.59. The
variable will be available with autoconf 2.70.
Fixes: https://pagure.io/freeipa/issue/8272
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When ipa-adtrust-install is run, the tool detects masters that are
not enabled as trust agents and propose to configure them. With the
current code, the Schema Compat plugin is not enabled on these new
trust agents and a manual restart of LDAP server + SSSD is required.
With this commit, ipa-adtrust-install now calls remote code on the new
agents through JSON RPC api, in order to configure the missing parts.
On the remote agent, the command is using DBus and oddjob to launch
a new command,
/usr/libexec/ipa/oddjob/org.freeipa.server.trust-enable-agent [--enable-compat]
This command configures the Schema Compat plugin if --enable-compat is
provided, then restarts LDAP server and SSSD.
If the remote agent is an older version and does not support remote
enablement, or if the remote server is not responding, the tool
ipa-adtrust-install prints a WARNING explaining the steps that need
to be manually executed in order to complete the installation, and
exits successfully (keeping the current behavior).
Fixes: https://pagure.io/freeipa/issue/7600
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Since we are authenticating against AD DC before talking to it (by using
trusted domain object's credentials), we need to override krb5.conf
configuration in case --server option is specified.
The context is a helper which is launched out of process with the help
of oddjobd. The helper takes existing trusted domain object, uses its
credentials to authenticate and then runs LSA RPC calls against that
trusted domain's domain controller. Previous code directed Samba
bindings to use the correct domain controller. However, if a DC visible
to MIT Kerberos is not reachable, we would not be able to obtain TGT and
the whole process will fail.
trust_add.execute() was calling out to the D-Bus helper without passing
the options (e.g. --server) so there was no chance to get that option
visible by the oddjob helper.
Also we need to make errors in the oddjob helper more visible to
error_log. Thus, move error reporting for a normal communication up from
the exception catching.
Resolves: https://pagure.io/freeipa/issue/7895
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Replace the @PYTHONSHEBANG@ substitution with a valid #!/usr/bin/python3
shebang. This turns Python .in files into valid Python files. The files
can now be checked with pylint and IDEs recognize the files as Python
files.
The shebang is still replaced with "#!$(PYTHON) -E" to support
platform-python.
Related: https://pagure.io/freeipa/issue/7984
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
The oddjobd config files are now auto-generated with automake to have
correct path to libexec on all platforms.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In oddjobd it is possible to pass arguments as command line or on the
stdin. We use command line to pass them but the way oddjobd registers
the D-BUS method signatures is by specifying all arguments as mandatory.
Internally, oddjobd simply ignores if you passed less arguments than
specified in the D-BUS defition. Unfortunately, it is not possible to
specify less than maximum due to D-BUS seeing all arguments in the
list (30 is defined for the trust-fetch-domains).
To pass options, have to pad a list of arguments to maximum with empty
strings and then filter out unneeded ones in the script. Option parser
already removes all options from the list of arguments so all we need to
do is to take our actual arguments. In case of trust-fetch-domains, it
is the name of the domain so we can only care about args[0].
Fixes: https://pagure.io/freeipa/issue/7903
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Refactor com.redhat.idm.trust-fetch.domains oddjob helper to allow
passing administrative credentials and a domain controller to talk to.
This approach allows to avoid rediscovering a domain controller in case
a user actually specified the domain controller when establishing trust.
It also allows to pass through admin credentials if user decides to do
so. The latter will be used later to allow updating trust topology in a
similar oddjob helper.
Resolves: https://pagure.io/freeipa/issue/7895
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Python scripts are now generated from templates. The scripts are marked
as nodist (no distribution) but install targets. The templates for the
scripts are extra distribution data, no installation (noinst).
Fixes: https://pagure.io/freeipa/issue/7680
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
All Python scripts are now generated from a template with a dynamic
shebang.
ipatests/i18n.py is no longer an executable script with shebang. The
module is not executed as script directly, but rather as
$(PYTHON) ipatests/i18n.py
Fixes: https://pagure.io/freeipa/issue/7680
All Python scripts are now template files with a dynamic shebang line.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The Python 3 refactoring effort is finishing, it should be safe
to turn all scripts to run in Python 3 by default.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Do not use custom Env instance to determine the debug level to use for the
IPA API object - the IPA API object can properly determine the configured
debug level on its own.
Reviewed-By: Martin Basti <mbasti@redhat.com>
Add the apache user the ipawebui group.
Make the ccaches directory owned by the ipawebui group and make
mod_auth_gssapi write the ccache files as r/w by the apache user and
the ipawebui group.
Fix tmpfiles creation ownership and permissions to allow the user to
access ccaches files.
The webui framework now works as a separate user than apache, so the certs
used to access the dogtag instance need to be usable by this new user as well.
Both apache and the webui user are in the ipawebui group, so use that.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Some API contexts are used to modify global state (e.g. files in /etc
and /var). These contexts do not support confdir overrides. Initialize
the API with an explicit confdir argument to paths.ETC_IPA.
The special contexts are:
* backup
* cli_installer
* installer
* ipctl
* renew
* restore
* server
* updates
The patch also corrects the context of the ipa-httpd-kdcproxy script to
'server'.
https://fedorahosted.org/freeipa/ticket/6389
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
kinit_password() depends on ipaplatform.
Move kinit_password() as well as kinit_keytab() to a new
ipalib.install.kinit module, as they are used only from installers.
https://fedorahosted.org/freeipa/ticket/6474
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Automake manual section 13 What Gets Cleaned says that make maintainer-clean
should not remove files necessary for subsequent runs of ./configure.
It practically means that all usage of MAINTAINERCLEANFILES were incorrect
so I've removed them.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This commit removes unused variables or rename variables as "expected to
be unused" by using "_" prefix.
This covers only cases where fix was easy or only one unused variable
was in a module
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Prior To Windows Server 2012R2, the `netr_DsRGetForestTrustInformation` calls
performed against non-root forest domain DCs were automatically routed to
the root domain DCs to resolve trust topology information.
This is no longer the case, so the `com.redhat.idm.trust-fetch-domains` oddjob
helper used to establish one-way needs to explicitly contact root domain DCs
even in the case when an external trust to non-root domain is requested.
https://fedorahosted.org/freeipa/ticket/6057
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ID ranges for child domains of a forest trust were created incorrectly
in FreeIPA 4.4.0 due to refactoring of -- if the domain was already
existing, we never attempted to create the ID range for it.
At the same time, when domain was missing, we attempted to add ID range
and passed both forest root and the child domain names to add_range().
However, add_range() only looks at the first positional argument which
was the forest root name. That ID range always exists (it is created
before child domains are processed).
Modify the code to make sure child domain name is passed as the first
positional argument. In addition, the oddjob helper should explicitly
set context='server' so that idrange code will be able to see and use
ipaserver/dcerpc.py helpers.
Resolves: https://fedorahosted.org/freeipa/ticket/5738
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Use the default context rather the server context for code not running
inside the server.
This prevents the affected code from attempting to initialize the session
manager.
https://fedorahosted.org/freeipa/ticket/5988
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Add support for additional user name principal suffixes from
trusted Active Directory forests. UPN suffixes are property
of the forest and as such are associated with the forest root
domain.
FreeIPA stores UPN suffixes as ipaNTAdditionalSuffixes multi-valued
attribute of ipaNTTrustedDomain object class.
In order to look up UPN suffixes, netr_DsRGetForestTrustInformation
LSA RPC call is used instead of netr_DsrEnumerateDomainTrusts.
For more details on UPN and naming in Active Directory see
https://technet.microsoft.com/en-us/library/cc739093%28v=ws.10%29.aspxhttps://fedorahosted.org/freeipa/ticket/5354
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Move the remaining plugin code from ipalib.plugins to ipaserver.plugins.
Remove the now unused ipalib.plugins package.
https://fedorahosted.org/freeipa/ticket/4739
Reviewed-By: David Kupka <dkupka@redhat.com>
Use ipaplatform.constants in every corner instead of importing other bits or calling
some platform specific things, and remove most of the remaining hardcoded uid's.
https://fedorahosted.org/freeipa/ticket/5343
Reviewed-By: David Kupka <dkupka@redhat.com>
The ipautil.run function now returns an object with returncode and
output are accessible as attributes.
The stdout and stderr of all commands are logged (unless skip_output is given).
The stdout/stderr contents must be explicitly requested with a keyword
argument, otherwise they are None.
This is because in Python 3, the output needs to be decoded, and that can
fail if it's not decodable (human-readable) text.
The raw (bytes) output is always available from the result object,
as is "leniently" decoded output suitable for logging.
All calls are changed to reflect this.
A use of Popen in cainstance is changed to ipautil.run.
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Add server_conncheck command which calls ipa-replica-conncheck --replica
over oddjob.
https://fedorahosted.org/freeipa/ticket/5497
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Tomas Babej <tbabej@redhat.com>
The six way of doing this is to replace all occurences of "unicode"
with "six.text_type". However, "unicode" is non-ambiguous and
(arguably) easier to read. Also, using it makes the patches smaller,
which should help with backporting.
Reviewed-By: Petr Viktorin <pviktori@redhat.com>
This mimics Python 3's behavior, where sys.argv is automatically decoded
using file system encoding, as returned by sys.getfilesystemencoding(). This
includes reimplementation of os.fsdecode() from Python 3.
Reviewed-By: Petr Viktorin <pviktori@redhat.com>
python-krbV library is deprecated and doesn't work with python 3. Replacing all
it's usages with python-gssapi.
- Removed Backend.krb and KRB5_CCache classes
They were wrappers around krbV classes that cannot really work without them
- Added few utility functions for querying GSSAPI credentials
in krb_utils module. They provide replacements for KRB5_CCache.
- Merged two kinit_keytab functions
- Changed ldap plugin connection defaults to match ipaldap
- Unified getting default realm
Using api.env.realm instead of krbV call
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
When ipa-getkeytab is used to fetch trusted domain object credentials,
the fetched entry has always kvno 1. ipa-getkeytab always adds a key to
keytab which means older key versions will be in the SSSD keytab and
will confuse libkrb5 ccache initialization code as all kvno values are
equal to 1. Wrong key is picked up then and kinit fails.
To solve this problem, always remove existing
/var/lib/sss/keytabs/forest.keytab before retrieving a new one.
To make sure script's input cannot be used to define what should be
removed (by passing a relative path), make sure we retrieve trusted
forest name from LDAP. If it is not possible to retrieve, the script
will issue an exception and quit. If abrtd is running, this will be
recorded as a 'crash' and an attempt to use script by malicious user
would be recorded as well in the abrtd journal.
Additionally, as com.redhat.idm.trust-fetch-domains will create
ID ranges for the domains of the trusted forest if they don't exist,
it needs permissions to do so. The permission should be granted only
to cifs/ipa.master@IPA.REALM services which means they must have
krbprincipalname=cifs/*@IPA.REALM,cn=services,... DN and be members of
cn=adtrust agents,cn=sysaccounts,... group.
Solves https://bugzilla.redhat.com/show_bug.cgi?id=1250190
Ticket https://fedorahosted.org/freeipa/ticket/5182
Reviewed-By: Tomas Babej <tbabej@redhat.com>
If sssd user does not exist, it means SSSD does not run as sssd user.
Currently SSSD has too tight check for keytab permissions and ownership.
It assumes the keytab has to be owned by the same user it runs under
and has to have 0600 permissions. ipa-getkeytab creates the file with
right permissions and 'root:root' ownership.
Jakub Hrozek promised to enhance SSSD keytab permissions check so that
both sssd:sssd and root:root ownership is possible and then when SSSD
switches to 'sssd' user, the former becomes the default. Since right now
SSSD 1.13 is capable to run as 'sssd' user but doesn't create 'sssd'
user in Fedora 22 / RHEL 7 environments, we can use its presence as a
version trigger.
https://fedorahosted.org/freeipa/ticket/5136
Reviewed-By: Tomas Babej <tbabej@redhat.com>
One-way trust is the default now, use 'trust add --two-way ' to
force bidirectional trust
https://fedorahosted.org/freeipa/ticket/4959
In case of one-way trust we cannot authenticate using cross-realm TGT
against an AD DC. We have to use trusted domain object from within AD
domain and access to this object is limited to avoid compromising the whole
trust configuration.
Instead, IPA framework can call out to oddjob daemon and ask it to
run the script which can have access to the TDO object. This script
(com.redhat.idm.trust-fetch-domains) is using cifs/ipa.master principal
to retrieve TDO object credentials from IPA LDAP if needed and then
authenticate against AD DCs using the TDO object credentials.
The script pulls the trust topology out of AD DCs and updates IPA LDAP
store. Then IPA framework can pick the updated data from the IPA LDAP
under normal access conditions.
Part of https://fedorahosted.org/freeipa/ticket/4546
Reviewed-By: Tomas Babej <tbabej@redhat.com>