Call sssdconfig.save_domain(domain) after each configuration
change during ipa-client-automount --uninstall.
Previously, sssdconfig.save_domain(domain) was called only
outside of the domain detection loop which changed the domain
configuration. This introduced issues as this method's behavior
is only consistent when configuration items are removed in a
certain order: https://pagure.io/SSSD/sssd/issue/4149
Plus, it is more correct to save the configuration from within
the loop if ever we support multiple domains.
Fixes: https://pagure.io/freeipa/issue/8190
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This will allow for CA certificates to be dropped from the list
of certificates. It also allows for the trust flags to be
updated when an existing cert is dropped and re-added.
https://pagure.io/freeipa/issue/8124
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Trusted domain object in LDAP uses ipaNTTrustedDomainSID attribute to
store SID of the trusted domain while IPA domain itself uses
ipaNTSecurityIdentifier. When mapping the values for printing out a
summary table, use the right mapping according to the object.
Fixes: https://pagure.io/freeipa/issue/8149
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-client-install no longer overrides SSH client settings for
HostKeyAlgorithms. It's no longer necessary to configure
HostKeyAlgorithms. The setting was disabling modern algorithms and
enabled a weak algorithm that is blocked in FIPS code.
The ipa-client package removes IPA's custom HostKeyAlgorithm from
/etc/ssh/ssh_config during package update. Non-IPA settings are not
touched.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1756432
Fixes: https://pagure.io/freeipa/issue/8082
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
If certmonger is running prior to client installation then its
IPA CA configuration will be incomplete and missing the CA chain.
If a certificate is subsequently requested with -F to store the
CA chain in a file or NSS db it may not be available yet. A
conditional restart of certmonger will pick up the new IPA
configuration and complete the IPA CA configuration in certmonger.
A pure restart and service activation is not done since certmonger
is not required unless --request-cert was passed ipa-client-install.
https://pagure.io/freeipa/issue/8105
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Ade Lee <alee@redhat.com>
660c49 introduced --idmap-domain which sets the Domain option in
idmapd.conf. However the help message for that knob mentioned
idmap.conf which is wrong. Fix that.
Reported by Marc Muehlfeld <mmuehlfe@redhat.com>.
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
ansible-freeipa breaks if this functions do not exist, so they will be
added back and marked as deprecated.
Related Tickets:
https://pagure.io/freeipa/issue/8062
Signed-off-by: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
authselect doesn't allow one to directly write to
/etc/nsswitch.conf. It will complain bitterly if it
detects it and will refuse to work until reset.
Instead it wants the user to write to
/etc/authselect/user-nsswitch.conf and then it will handle
merging in any differences.
To complicate matters some databases are not user configurable
like passwd, group and of course, automount. There are some
undocumented options to allow one to override these though so
we utilize that.
tasks are used so that authselect-based installations can still
write directly to /etc/nsswitch.conf and operate as it used to.
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This will let us call it from ipaplatform.
Mark the original location as deprecated.
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-client-automount used to only restore nsswitch.conf when sssd was not
used. However authselect's default profile is now sssd so always restore
nsswitch.conf's automount configuration to 'files sssd'.
Note that the behavior seen before commit:
a0e846f56c
would always restore nsswitch.conf to the previous state which in some cases
was wrong.
Fixes: https://pagure.io/freeipa/issue/8038
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The "domain_member" state was not removed at uninstall time.
Remove it so that future invocations of ipa-client-samba work.
Fixes: https://pagure.io/freeipa/issue/8021
Signed-off-by: François Cami <fcami@redhat.com>
https://pagure.io/freeipa/issue/8021
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Fixes: https://pagure.io/freeipa/issue/8019
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Introduces new utility to configure Samba on an IPA domain member.
The tool sets up Samba configuration and internal databases, creates
cifs/... Kerberos service and makes sure that a keytab for this service
contains the key with the same randomly generated password that is set
in the internal Samba databases.
Samba configuration is created by querying an IPA master about details
of trust to Active Directory configuration. All known identity ranges
added to the configuration to allow Samba to properly handle them
(read-only) via idmap_sss.
Resulting configuration allows connection with both NTLMSSP and Kerberos
authentication for IPA users. Access controls for the shared content
should be set by utilizing POSIX ACLs on the file system under a
specific share.
The utility is packaged as freeipa-client-samba package to allow pulling
in all required dependencies for Samba and cifs.ko (smb3.ko) kernel
module. This allows an IPA client to become both an SMB server and an
SMB client.
Fixes: https://pagure.io/freeipa/issue/3999
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Updating ipa_client_automount.py and ipactl.py's codestyle is
mandatory to make pylint pass as these are considered new files.
Fixes: https://pagure.io/freeipa/issue/7984
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fixes: https://pagure.io/freeipa/issue/7984
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This is to suppress the spurious error message:
The ipa-client-install command failed.
when the client is not configured.
This is managed by allowing a ScriptError to return SUCCESS (0)
and have this ignored in log_failure().
https://pagure.io/freeipa/issue/7836
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This was an attempt to suppress client uninstallation failure
messages in the server uninstallation script. This method
inadvertently also suppressed client uninstallation messages and
was generally confusing.
This reverts part of b96906156bhttps://pagure.io/freeipa/issue/7836
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The code was attempting to strip off any trailing newline and then
calling lstrip() on the rest.
This assumes that the key has a trailing newline. At best this
can cause the last character of the comment to be lost. If there
is no comment it will fail to load the key because it is invalid.
Patch by Félix-Antoine Fortin <felix-antoine.fortin@calculquebec.ca>
https://pagure.io/freeipa/issue/7959
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
In a interactive installation of freeipa server a promt asks for NTP related
options after install_check has been called. As it may cause confusion to users
moving to install_check methods where the prompt for other options is being done.
Refactored sync_time() method to use passed parameters ntp_servers and ntp_pool.
Resolves: https://pagure.io/freeipa/issue/7930
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Oleg Kozlov <okozlov@redhat.com>
On Linux systems the length limit for hostnames is hardcoded
at 64 in MAXHOSTNAMELEN
Solaris, for example, allows 255 characters, and DNS allows the
total length to be up to 255 (with each label < 64).
Add a knob to allow configuring the maximum hostname length (FQDN)
The same validators are used between hosts and DNS to apply
the knob only when dealing with a FQDN as a hostname.
The maxlen option is included so installers can limit the length
of allowed hostnames when the --hostname option is used.
https://pagure.io/freeipa/issue/2018
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Mark the --request-cert option for ipa-client-install as deprecated.
Users are encouraged to request a PEM certificate with certmonger
instead. The option and /etc/ipa/nssdb will be removed in a future
version.
Related: https://pagure.io/freeipa/issue/7492
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
As the FreeIPA server is no longer a NTP service
providing instance its clients and replicas
configuration of time service can not be handled
as it was before change to chrony. Configuration
using master FQDN or autodiscovery for DNS record
would make no difference because every FreeIPA
instance is only chrony client now and does not
update DNS _ntp._udp record.
FreeIPA now asks user for NTP source server
or pool address in interactive mode if there is
no server nor pool specified and autodiscovery
has not found any NTP source in DNS records.
Resolves: https://pagure.io/freeipa/issue/7747
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The ipaclient PyPI package does not ship the ipaclient.install
subpackage. The ipaclient.install.ipadiscovery module with IPADiscovery
is now available as ipaclient.discovery, so it can be used by consumers
of PyPI packages.
The module ipaclient.install.ipadiscovery provides a backwards
compatibility shim with deprecation warning.
Fixes: https://pagure.io/freeipa/issue/7861
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replace get_ldap_uri() + LDAPClient() with new LDAPClient constructors
like LDAPClient.from_realm().
Some places now use LDAPI with external bind instead of LDAP with simple
bind. Although the FQDN *should* resolve to 127.0.0.1 / [::1], there is
no hard guarantee. The draft
https://tools.ietf.org/html/draft-west-let-localhost-be-localhost-04#section-5.1
specifies that applications must verify that the resulting IP is a
loopback API. LDAPI is always local and a bit more efficient, too.
The simple_bind() method also prevents the caller from sending a
password over an insecure line.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For smart card and certificate authentication, Apache's
mod_lookup_identity module must be able to acess SSSD IFP. The module
accesses IFP as Apache user, not as ipaapi user.
Apache is not allowed to use IFP by default. The update code uses the
service's ok-to-auth-as-delegate flag to detect smart card / cert auth.
See: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
For smart card authentication, ipaapi must be able to access to sss-ifp.
During installation and upgrade, the ipaapi user is now added to
[ifp]allowed_uids.
The commit also fixes two related issues:
* The server upgrade code now enables ifp service in sssd.conf. The
existing code modified sssd.conf but never wrote the changes to disk.
* sssd_enable_service() no longer fails after it has detected an
unrecognized service.
Fixes: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Some incorrect errors are possible if a client installation
fails and a configuration rollback is required.
These include:
1. Unconfigured automount client failed: CalledProcessError(Command
['/usr/sbin/ipa-client-automount', '--uninstall', '--debug']
returned non-zero exit status 1: '')
Caused by check_client_configuration() not returning the correct
return value (2).
2. WARNING: Unable to revert to the pre-installation state ('authconfig'
tool has been deprecated in favor of 'authselect'). The default sssd
profile will be used instead.
The authconfig arguments would have been: authconfig --disableldap
--disablekrb5 --disablesssdauth --disablemkhomedir
If installation fails before SSSD is configured there is no state
to roll back to. Detect this condition.
3. An error occurred while removing SSSD's cache.Please remove the
cache manually by executing sssctl cache-remove -o.
Again, if SSSD is not configured yet then there is no cache to
remove. Also correct the missing space after the period.
https://pagure.io/freeipa/issue/7729
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Replace six.moves and six.StringIO/BytesIO imports with cannonical
Python 3 packages.
Note: six.moves.input behaves differently than builtin input function.
Therefore I left six.moves.input for now.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Python 2 had old style and new style classes. Python 3 has only new
style classes. There is no point to subclass from object any more.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There is no need to set replica_file to None for client installations.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Client installation fails if '/etc/krb5.keytab' exists as a zero-length
file. Deleting empty keytab before proceeding with the installation
fixes the problem.
https://pagure.io/freeipa/issue/7625
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The subject base is used as a fallback to find the available
CA certificates during client enrollment if the LDAP connection
fails (e.g. due to new client connecting to very old server) and
for constructing the subject if a certificate is requested.
raw=True is passed to config-show in order to avoid parsing
the server roles which will fail because the services aren't
marked as enabled until after the client installation is
successful on a master.
ipa-join providing the subject base via stderr was fragile and
would cause client enrollment to fail if any other output was
included in stderr.
https://pagure.io/freeipa/issue/7674
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Client installation with --no-sssd option has already beeen deprecated
with https://pagure.io/freeipa/issue/5860. Authconfig support has been
removed, therefore --no-ac option can be removed also.
ipatests/test_integration/test_authselect.py: Skip no_sssd and no_ac tests.
See: https://pagure.io/freeipa/issue/7671
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
In order to support pylint 2.0 the following violations must be fixed:
- `chained-comparison` (R1716):
Simplify chained comparison between the operands This message is
emitted when pylint encounters boolean operation like
"a < b and b < c", suggesting instead to refactor it to "a < b < c".
- `consider-using-in` (R1714):
Consider merging these comparisons with "in" to %r To check if a
variable is equal to one of many values,combine the values into a
tuple and check if the variable is contained "in" it instead of
checking for equality against each of the values.This is faster
and less verbose.
Issue: https://pagure.io/freeipa/issue/7614
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Aiming to support pylint 2.0 some functions and methods must have their
return statements updated in order to fix two new violations:
- `useless-return` (R1711):
Useless return at end of function or method Emitted when a single
"return" or "return None" statement is found at the end of function
or method definition. This statement can safely be removed because
Python will implicitly return None
- `inconsistent-return-statements` (R1710):
Either all return statements in a function should return an
expression, or none of them should. According to PEP8, if any return
statement returns an expression, any return statements where no value
is returned should explicitly state this as return None, and an
explicit return statement should be present at the end of the
function (if reachable)
Issue: https://pagure.io/freeipa/issue/7614
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-client-install --request-cert now waits until certmonger has
provided a host certificate. In case of an error, ipa-client-install no
longer pretents to success but fails with an error code.
The --request-cert option also ensures that certmonger is enabled and
running.
See: Fixes: https://pagure.io/freeipa/issue/7623
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Calls to `os.fsync(f.fileno())` need to be accompained by `f.flush()`.
Commit 8bbeedc93f introduces the helper
`ipapython.ipautil.flush_sync()`, which handles all calls in the right
order.
However, `flush_sync()` takes as parameter a file object with fileno
and name, where name must be a path to the file, this isn't possible
in some cases where file descriptors are used.
Issue: https://pagure.io/freeipa/issue/7251
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Due to how 'openldap-client' parses its configuration files this patch
changes how comments are added, moving them to the line above instead
of appending to the same line.
IPA doesn't want to break existing configuration, if a value already
exists it adds a comment to the modified setting and a note about that
on the line above.
New settings will be added without any note.
Issue: https://pagure.io/freeipa/issue/5202
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Since the switch to authselect, the service oddjobd is not
automatically enabled when ipa client is installed with
--mkhomedir.
The fix makes sure that the service is enabled/started, and
stores the pre-install state in sysrestore.state, in order
to revert to the pre-install state when uninstall is called
Fixes:
https://pagure.io/freeipa/issue/7604
Reviewed-By: Christian Heimes <cheimes@redhat.com>
In CIS hardened mode, the process umask is 027. This results in some
files not being world readable. Ensure that write_certificate_list()
calls in client installer, server installer, and upgrader create cert
bundles with permission bits 0644.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The server installer had no console logger set so print
statements were used for communication. Now that a logger
is enabled the extra prints need to be dropped.
A number of logger.info statements have been upgraded
to debug since they do not need to appear on the console
by default.
https://pagure.io/freeipa/issue/6760
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The server installation and uninstallation overlaps both the
server and client installers. The output could be confusing
with a server uninstall finishing with the message:
The ipa-client-install command was successful
This was in part due to the fact that the server was not
configured with a console format and verbose was False which
meant that no logger messages were displayed at all.
In order to suppress client installation errors and avoid
confusion add a list of errors to ignore. If a server install
was not successful and hadn't gotten far enough to do the
client install then we shouldn't complain loudly about it.
https://pagure.io/freeipa/issue/6760
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
On multiple occasions, SRV query answers were not properly sorted by
priority. Records with same priority weren't randomized and shuffled.
This caused FreeIPA to contact the same remote peer instead of
distributing the load across all available servers.
Two new helper functions now take care of SRV queries. sort_prio_weight()
sorts SRV and URI records. query_srv() combines SRV lookup with
sort_prio_weight().
Fixes: https://pagure.io/freeipa/issue/7475
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
authselect needs to be configured with the 'with-sudo' feature (except
when ipa-client-install is called with the option --no-sudo).
https://pagure.io/freeipa/issue/7562
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
PR https://github.com/freeipa/freeipa/pull/1747 added the first template
for FreeIPA client package. The template file was added to server
templates, which broke client-only builds.
The template is now part of a new subdirectory for client package shared
data.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The server, replica, and client installer now print the current version
number on the console, before the actual installer starts. It makes it
easier to debug problems with failed installations. Users typically post
the console output in a ticket.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
OpenLDAP has deprecated PORT and HOST stanzes in ldap.conf. The presence
of either option causes FreeIPA installation to fail. Refuse
installation when a deprecated and unsupported option is present.
Fixes: https://pagure.io/freeipa/issue/7418
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
