SPAKE is based on the crypto primitives which are not FIPS compliant
yet. This means that in FIPS mode use of 'hardened' authentication
indicator is not possible. Skip corresponding tests in FIPS mode.
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
paramiko cannot be used in FIPS mode. We have few tests that import
generic methods from test_otp (add_token/del_token) and those tests fail
in FIPS mode due to unconditional 'import paramiko'.
Instead, move 'import paramiko' to the ssh_2f() helper which is not used
in FIPS mode (the whole SSH 2FA test is skipped then).
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The subCA keys are loaded out-of-band after creation into the
CA so they may have been replicated but not loaded. Give more
time for them to appear in the remote CA.
Use a loop for the checking instead of a raw sleep because most
of the time this is very fast (< 15 seconds) but sometimes it
requires just a bit more. Allow up to 60 seconds.
To avoid output difference, strip the token name out of certutil
output. We don't care about the token a certificate is stored
in, the internal or the FIPS token. We just care that they exist
on both servers and that the keys match.
Apparently in some cases the token name is displayed and not in
others so lets normalize the output to make comparisons more
consistent.
Fixes: https://pagure.io/freeipa/issue/9096
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Cleanup up no longer used Pylint's disables where possible.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
As of Python3 `currentThread`, `thread.getName` are aliases for
`threading.current_thread()` and `threading.Thread.name`
respectively.
In Python3.10:
> bpo-43723: The following threading methods are now deprecated and
should be replaced:
currentThread => threading.current_thread()
activeCount => threading.active_count()
Condition.notifyAll => threading.Condition.notify_all()
Event.isSet => threading.Event.is_set()
Thread.setName => threading.Thread.name
thread.getName => threading.Thread.name
Thread.isDaemon => threading.Thread.daemon
Thread.setDaemon => threading.Thread.daemon
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> New checker consider-using-dict-items. Emitted when iterating over
dictionary keys and then indexing the same dictionary with the key
within loop body.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The klass property is referenced to class attribute.
Today's Pylint doesn't support this.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The type of value to be compared is class attribute.
Today's Pylint doesn't support this.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> Emitted when iterating over the dictionary items (key-item pairs) and
accessing the value by index lookup. The value can be accessed directly
instead.
Note: in Python3 removing from dict during an iteration is not
possible even. For example,
```
cat a.py
d = {"a": 1}
for k, v in d.items():
if v is not None:
del d[k]
python3 a.py
Traceback (most recent call last):
File "/usr/src/RPM/BUILD/freeipa/a.py", line 3, in <module>
for k, v in d.items():
RuntimeError: dictionary changed size during iteration
```
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There is no actual usage of deprecated classes for Python3.
Pylint complains about such for Python2. Since Python2 is no
longer supported these imports were removed.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`__home` has been added in 8ca44bcbfa,
later `tests.util` was refactored in
fd43b39145, but `__home` wasn't cleaned
up.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9.0 new checker:
> Emitted when accessing only the first or last element of str.split().
The first and last element can be accessed by using str.split(sep,
maxsplit=1)[0] or str.rsplit(sep, maxsplit=1)[-1] instead.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Use AD-SUPPORT subpolicy when testing trust to Active Directory in FIPS
mode. This is required in FIPS mode due to AD not supporting Kerberos
AES-bases encryption types using FIPS-compliant PBKDF2 and KDF, as
defined in RFC 8009.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The test
test_integration/test_installation.py::TestInstallWithoutNamed
was missing in some nightly definitions.
Add the job definition for:
- nightly_latest_selinux.yaml
- nightly_latest_testing.yaml
- nightly_latest_testing_selinux.yaml
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The example text included a trailing dot which isn't actually
allowed in a system hostname (just DNS). Remove the suggestion
to include it and strip off any trailing dot so that the install
can proceed.
Related: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The refactor change 9094dfc had a slight error where the
user-input provided value in input wasn't being validated. Only
the command-line or the current FQDN was being verified so
if the FQDN was bad any value input by the user was being skipped.
Fixes: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Added tests using posix AD trust and non posix AD trust.
For option --auto-private-groups=[hybrid/true/false]
Related : https://pagure.io/freeipa/issue/8807
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
On RHEL tests are randomly failing because of this check
and the test doesn't need to check this.
Related : https://pagure.io/freeipa/issue/9108
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is some contention between certmonger starting during the
uninstallation process in order to stop the tracking and activity
going on within certmonger helpers.
As near as I can tell certmonger is not running, then IPA is
stopped in order to uninstall, then certmonger is started to stop
the tracking. certmonger checks cert status on startup but since
IPA isn't running it can't get a host ticket. During this time any
request over DBus may time out, causing a test to fail when we're
just trying to clean up.
https://pagure.io/freeipa/issue/8506
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This test checks that ipa-ccache-sweep.timer is enabled by default
during the ipa installation.
related: https://pagure.io/freeipa/issue/9107
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The new images include 389-ds-base 2.0.14-1
which contains the fixes for the following tickets:
389-ds-base #5079 Freeipa nightly test failure with winsync agreement
389-ds-base #5031 ipa-restore broken in selinux enforcing mode
Fixes: https://pagure.io/freeipa/issue/9069
Fixes: https://pagure.io/freeipa/issue/9051
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
OpenLDAP 2.6+ finally deprecated -h and -p options in all its command
line tools. They are not allowed anymore and cause ldap* tools to stop
hard with 'unknown option' error.
Fix this by always using -H url option instead. Deriving default value
for -H url from the configuration file still works, it is only -h and -p
that were deprecated.
See also: https://bugs.openldap.org/show_bug.cgi?id=8618
Fixes: https://pagure.io/freeipa/issue/9106
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test TestIpaClientAutomountFileRestore expects a
specific order for the automount sources to query
in /etc/nsswitch.conf.
With authselect update 1.3.0, the databases are sorted in
order of likelihood and the following line in seen:
automount: files sss
instead of
automount: sss files
Since the test doesn't care about the order but rather about
the list of sources, ignore the order.
Fixes: https://pagure.io/freeipa/issue/9067
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
FullLoader class for YAML loader was introduced in version 5.1 which
also deprecated default loader. SafeLoader, however, stays consistent
across the versions and brings added security.
This fix is necessary as PyYAML > 5.1 is not available in downstream.
Related: https://pagure.io/freeipa/issue/9009
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a test to test_config_plugin, that calls ipa config-mod
with the same value as already present in LDAP.
The call must return EmptyModlist.
Related: https://pagure.io/freeipa/issue/9063
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Added web-ui tests to verify where operations
using subordinate ids are working as expected.
Related : https://pagure.io/freeipa/issue/8361
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Following test cases would be checked:
- when called with --principal (it should then prompt for a password)
- when called with --principal / --password
- when called without principal and password but with a kerberos TGT,
kinit admin done before calling ipa-replica-conncheck
- when called without principal and password, and without any kerberos
TGT (it should default to principal=admin and prompt for a password)
related: https://pagure.io/freeipa/issue/9047
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When empty cert request is submitted to certmonger, it goes to
segfault. This fix test that if something like this happens,
certmonger should gracefuly handle it
and some PEP8 fixes
related: https://pagure.io/certmonger/issue/191
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
The test sets 389-ds nsslapd-idletimeout to 60s, then does a
kinit with an otp token (which makes ipa-otpd create a LDAP
connection), then sleeps for 60s. The expectation is that
ns-slapd will detect that the LDAP conn from ipa-otpd is idle
and close the connection.
According to 389ds doc, the idle timeout is enforced when the
connection table is walked. By doing a ldapsearch, the test
"wakes up" ns-slapd and forces the detection of ipa-otpd
idle connection.
Fixes: https://pagure.io/freeipa/issue/9044
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Fixture `expire_certs` moves date back after renewing the certs.
This is causing the ipa-replica to fail. This fix first uninstalls
the server then moves back the date.
Fixes: https://pagure.io/freeipa/issue/9052
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Signed-off-by: Timo Aaltonen <tjaalton@debian.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pkeys are not used anywhere in the method thus can be removed.
Related: https://pagure.io/freeipa/issue/9036
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
In scenario:
1. make sure that reverse zone doesn't have the desired PTR record
2. open host page of the host with matchnig the A record, e.g.: https://server.pvoborni.test/ipa/ui/#/e/host/details/test2.pvoborni.test
3. click on the "Host name" link, it will bring us to it's DNS record page. E.g., https://server.pvoborni.test/ipa/ui/#/e/dnsrecord/details/pvoborni.test&test2
! notice the missing '.' in the URL after zone name (pvoborni.test)
4. click on the A record , dialog will show up, saying "record not found"
5. click on the "create DNS record"
PTR record created by Web UI doesn't have trailing '.' (is not fully
qualified record) even if the DNS zone is.
This patch is fixing the link to the DNS Record page so that the
page then correctly gets the DNS Zone name and thus creates a correct
fully qualified PTR record.
https://bugzilla.redhat.com/show_bug.cgi?id=2009114https://pagure.io/freeipa/issue/9036
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test definition is missing the instruction to update
the packages.
Fixes: https://pagure.io/freeipa/issue/9035
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
