Added OnActiveSec=12h to start the timer cycle because OnUnitActiveSec setting alone never triggers the timer after boot as there has not been transition between active and inactive state.
Removed [Install] section from sweeper.service as it is not needed
Fixes: https://pagure.io/freeipa/issue/9231
Signed-off-by: Jesse Sandberg <jesse.sandberg@netcode.fi>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Python code does detection of the system encoding based on the locale
settings. On RHEL 8.4 development images we somehow get LANG=en_US which
defaults to iso8859-1 _inside_ the systemd-started service, even though
the whole environment defaults to LANG=en_US.UTF-8.
When instrumented with ExecStartPre=/usr/bin/locale, the following
output can be seen:
locale[45481]: LANG=en_US
locale[45481]: LC_CTYPE="en_US"
locale[45481]: LC_NUMERIC="en_US"
locale[45481]: LC_TIME="en_US"
locale[45481]: LC_COLLATE="en_US"
locale[45481]: LC_MONETARY="en_US"
locale[45481]: LC_MESSAGES="en_US"
locale[45481]: LC_PAPER="en_US"
locale[45481]: LC_NAME="en_US"
locale[45481]: LC_ADDRESS="en_US"
locale[45481]: LC_TELEPHONE="en_US"
locale[45481]: LC_MEASUREMENT="en_US"
locale[45481]: LC_IDENTIFICATION="en_US"
locale[45481]: LC_ALL=
ipactl[45483]: Unexpected error
ipactl[45483]: SystemEncodingError: System encoding must be UTF-8, 'iso8859-1' is not supported. Set LC_ALL="C.UTF-8", or LC_ALL="" and LC_CTYPE="C.UTF-8".
systemd[1]: ipa.service: Main process exited, code=exited, status=1/FAILURE
Set the environment to explicit LC_ALL=C.UTF-8 to please the Python
code. FreeIPA server side only cares about actual encoding, not the
language itself. We already use LC_ALL=C.UTF-8 in httpd service snippet.
Fixes: https://pagure.io/freeipa/issue/8617
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Rather than having a shared ccache per user, configure
mod_auth_gssapi to create a unique one. This requires cleanup
to remove expired caches. A new script is added,
ipa-ccache-sweeper to do this. It will be invoked by a
new service, ipa-ccache-sweep, which will be executed every
12 hours by an equally-named timer.
https://pagure.io/freeipa/issue/8589
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
The init/systemd directory is for server only and not part of
CLIENT_ONLY builds.
It's necesary to run pre/post installation hooks to make systemd aware
of new files.
Fixes: https://pagure.io/freeipa/issue/8367
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
EPN stands for Expiring Password Notification. It is a standalone
tool designed to build a list of users whose password would expire
in the near future, and either display the list in a machine-readable
format, or send email notifications to these users.
EPN provides command-line options to display the list of affected users.
This provides data introspection and helps understand how many emails
would be sent for a given day, or a given date range.
The command-line options can also be used by a monitoring system to alert
whenever a number of emails over the SMTP quota would be sent.
EPN is meant to be launched once a day from an IPA client (preferred)
or replica from a systemd timer.
EPN does not keep state. The list of affected users is built at runtime
but never kept.
TLS/STARTTLS SMTP code is untested and unlikely to work as-is.
Parts of code contributed by Rob Crittenden.
Ideas and feedback contributed by Christian Heimes and Michal Polovka.
Fixes: https://pagure.io/freeipa/issue/3687
Signed-off-by: François Cami <fcami@redhat.com>
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
* Use sd-notify in ipa-custodia.service
* Introduce libexec/ipa/ipa-custodia script. It comes with correct
default setting for IPA's config file. The new file also makes it
simpler to run IPA's custodia instance with its own SELinux context.
* ipapython no longer depends on custodia
The patch addresses three issues:
* https://bugzilla.redhat.com/show_bug.cgi?id=1430247
Forward compatibility with Custodia 0.3 in Fedora rawhide
* https://pagure.io/freeipa/issue/5825
Use sd-notify
* https://pagure.io/freeipa/issue/6788
Prepare for separate SELinux context
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The file ipa.service defines
Requires=network.target
which means that ipa stack will be restarted each time the network stack
is restarted. This is not needed, and Wants=network.target will be sufficient.
https://fedorahosted.org/freeipa/ticket/6723
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
ipa.service unit defines Requires=gssproxy. Because of this, during
ipa-server-upgrade, the restart of gssproxy triggers a restart of ipa unit
(hence stopping LDAP server and breaking the connection api.Backend.ldap2).
Calls using this connection after gssproxy restart fail and ipa-server-upgrade
exits on failure.
The fix defines Wants=gssproxy to avoid the restart of ipa.service
https://fedorahosted.org/freeipa/ticket/6705
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Stop using memcache, use mod_auth_gssapi filesystem based ccaches.
Remove custom session handling, use mod_auth_gssapi and mod_session to
establish and keep a session cookie.
Add loopback to mod_auth_gssapi to do form absed auth and pass back a
valid session cookie.
And now that we do not remove ccaches files to move them to the
memcache, we can avoid the risk of pollutting the filesystem by keeping
a common ccache file for all instances of the same user.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
At the same time, I've renamed tmpfilesd config file to static name
"ipa.conf" instead of using package-specific name. It had no purpose
and just complicated build and packaging.
Variable substitution into configuration has to be done in Makefile
and not in Autoconf as documented in:
Autoconf v2.69 manual chapter 4.8.2 Installation Directory Variables:
... Most of these variables have values that rely on prefix or
exec_prefix. ... Similarly, you should not rely on AC_CONFIG_FILES
to replace bindir and friends in your shell scripts and other files;
instead, let make manage their replacement.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
File httpd.service was created by RPM, what causes that httpd service may
fail due IPA specific configuration even if IPA wasn't installed or was
uninstalled (without erasing RPMs).
With this patch httpd service is configured by httpd.d/ipa.conf during
IPA installation and this config is removed by uninstaller, so no
residual http configuration related to IPA should stay there.
https://fedorahosted.org/freeipa/ticket/5681
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Add a customized Custodia daemon and enable it after installation.
Generates server keys and loads them in LDAP autonomously on install
or update.
Provides client code classes too.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
This will force recreation of the file-based ccache after IPA restore and
prevent a mismatch between cached and restored Kerberos keys.
https://fedorahosted.org/freeipa/ticket/5296
Reviewed-By: Martin Basti <mbasti@redhat.com>
Add integration of python-kdcproxy into FreeIPA to support the MS
Kerberos KDC proxy protocol (MS-KKDCP), to allow KDC and KPASSWD
client requests over HTTP and HTTPS.
- freeipa-server now depends on python-kdcproxy >= 0.3. All kdcproxy
dependencies are already satisfied.
- The service's state is configured in cn=KDC,cn=$FQDN,cn=masters,cn=ipa,
cn=etc,$SUFFIX. It's enabled, when ipaConfigString=kdcProxyEnabled is
present.
- The installers and update create a new Apache config file
/etc/ipa/kdcproxy/ipa-kdc-proxy.conf that mounts a WSGI app on
/KdcProxy. The app is run inside its own WSGI daemon group with
a different uid and gid than the webui.
- A ExecStartPre script in httpd.service symlinks the config file to
/etc/httpd/conf.d/ iff ipaConfigString=kdcProxyEnabled is present.
- The httpd.service also sets KDCPROXY_CONFIG=/etc/ipa/kdcproxy.conf,
so that an existing config is not used. SetEnv from Apache config does
not work here, because it doesn't set an OS env var.
- python-kdcproxy is configured to *not* use DNS SRV lookups. The
location of KDC and KPASSWD servers are read from /etc/krb5.conf.
- The state of the service can be modified with two ldif files for
ipa-ldap-updater. No CLI script is offered yet.
https://www.freeipa.org/page/V4/KDC_Proxyhttps://fedorahosted.org/freeipa/ticket/4801
Reviewed-By: Nathaniel McCallum <npmccallum@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
When both 'mod_auth_kerb' and 'mod_auth_gssapi' are installed at the same
time, they use common directory for storing Apache ccache file. Uninstallation
of 'mod_auth_kerb' removes this directory leading to invalid CCache path for
httpd and authentication failure.
Using an IPA-specific directory for credential storage during apache runtime
avoids this issue.
https://fedorahosted.org/freeipa/ticket/4973
Reviewed-By: David Kupka <dkupka@redhat.com>
httpd service stores Kerberos credentials in kernel keyring which gets
destroyed and recreated during service install/upgrade, causing problems when
the process is run under SELinux context other than 'unconfined_t'. This patch
enables HTTPInstance to set up a dedicated CCache file for Apache to store
credentials.
https://fedorahosted.org/freeipa/ticket/4973
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
https://fedorahosted.org/freeipa/ticket/4190
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
This required target is no longer needed as systemd from version 38
has its own journal which is also in the basic set of service unit
requirementes.
https://fedorahosted.org/freeipa/ticket/3511
We check (possibly different) data from LDAP only at (re)start.
This way we always shutdown exactly the services we started even if the list
changed in the meanwhile (we avoid leaving a service running even if it was
removed from LDAP as the admin decided it should not be started in future).
This should also fix a problematic deadlock with systemd when we try to read
the list of service from LDAP at shutdown.
* Adds ipa_memcached SystemV initscript
* Adds ipa_memcached service file and tmpfiles.d/ipa.conf
to recreate /var/run/ipa_memcached on reboot.
* Adds ipa_memcached config file
* Adds memcacheinstnace.py to manage ipa_memcaced as
as SimpleService object.
* Updates the IPA service list to include ipa_memcached,
at service positon 39, httpd is position 40
* Updates the spec file:
- requires the memcached daemon and python client
- installs service or initscripts depending on OS
- installs config file
- creates /var/run/ipa_memcached directory
* Modifies ipa-server-install to install ipa_memcached
