This has been annoying for developers who switch back and forth. It will
still break v1 but at least going from v1 to v2 will work seemlessly.
ticket 240
We used to check for these one at a time so you'd run it once and find
out you're missing the bind package. Install that and run the installer
again and you'd discover you're missing bind-dyndb-ldap.
ticket 140
* Adding a new SUDO schema file
* Adding this new file to the list of targets in make file
* Create SUDO container for sudo rules
* Add default sudo services to HBAC services
* Add default SUDO HBAC service group with two services sudo & sudo-i
* Installing schema
No SUDO rules are created by default by this patch.
This started with the client uninstaller returning a 1 when not installed.
There was no way to tell whether the uninstall failed or the client
simply wasn't installed which caused no end of grief with the installer.
This led to a lot of certmonger failures too, either trying to stop
tracking a non-existent cert or not handling an existing tracked
certificate.
I moved the certmonger code out of the installer and put it into the
client/server shared ipapython lib. It now tries a lot harder and smarter
to untrack a certificate.
ticket 142
We don't use certmonger to get certificates during installation because
of the chicken-and-egg problem. This means that the IPA web and ldap
certs aren't being tracked for renewal.
This requires some manual changes to the certmonger request files once
tracking has begun because it doesn't store a subject or principal template
when a cert is added via start-tracking.
This also required some changes to the cert command plugin to allow a
host to execute calls against its own service certs.
ticket 67
Move the user-private group caching code out of the global config and
determine the value the first time it is needed.
Renamed global_init() back to get_schema() and make it take an optional
connection. This solves the problem of being able to do all operations
with a simple bind instead of GSSAPI.
Moved the global get_syntax() into a class method so that a schema
can be passed in.
If a schema wasn't loaded during the module import then it is loaded
when the connection is created (so we have the credntials needed for
binding).
ticket 63
Fedora 14 introduced the following incompatiblities:
- the kerberos binaries moved from /usr/kerberos/[s]/bin to /usr/[s]bin
- the xmlrpclib in Python 2.7 is not fully backwards compatible to 2.6
Also, when moving the installed host service principals:
- don't assume that krbticketflags is set
- allow multiple values for krbextradata
ticket 155
This replaces the old no logging mechanism that only handled not logging
passwords passed on the command-line. The dogtag installer was including
passwords in the output.
This also adds no password logging to the sslget invocations and removes
a couple of extraneous log commands.
ticket 156
Installing dogtag is quite slow and it isn't always clear that things
are working. This breaks out some restart calls into separate steps
to show some amount of progress. There are still some steps that take
more than a minute (pkicreate and pkisilent).
Add new argument to pkisilent, -key_algorithm
Update a bunch of minimum required versions in the spec file.
tickets 139 (time) and 144 (key_algorithm)
Move the netgroup compat configuration from the nis configuration to
the existing compat configuration.
Add a 'status' option to the ipa-copmat-manage tool.
ticket 91
This patch:
- bumps up the minimum version of python-nss
- will initialize NSS with nodb if a CSR is loaded and it isn't already
init'd
- will shutdown NSS if initialized in the RPC subsystem so we use right db
- updated and added a few more tests
Relying more on NSS introduces a bit of a problem. For NSS to work you
need to have initialized a database (either a real one or no_db). But once
you've initialized one and want to use another you have to close down the
first one. I've added some code to nsslib.py to do just that. This could
potentially have some bad side-effects at some point, it works ok now.
This uses a new 389-ds plugin, Managed Entries, to automatically create
a group entry when a user is created. The DNA plugin ensures that the
group has a gidNumber that matches the users uidNumber. When the user is
removed the group is automatically removed as well.
If the managed entries plugin is not available or if a specific, separate
range for gidNumber is passed in at install time then User-Private Groups
will not be configured.
The code checking for the Managed Entries plugin may be removed at some
point. This is there because this plugin is only available in a 389-ds
alpha release currently (1.2.6-a4).
Whenever we upgrade IPA such that any data incompatibilities might occur
then we need to bump the DATA_VERSION value so that data will not
replicate to other servers. The idea is that you can do an in-place
upgrade of each IPA server and the different versions own't pollute
each other with bad data.
This causes the installation to blow up badly otherwise.
To remove an existing instance run:
# pkiremove -pki_instance_root=/var/lib -pki_instance_name=pki-ca
This disables all but the ldapi listener in DS so it will be quiet when
we perform our upgrades. It is expected that any other clients that
also use ldapi will be shut down by other already (krb5 and dns).
Add ldapi as an option in ipaldap and add the beginning of pure offline
support (e.g. direct editing of LDIF files).
I couldn't put the dogtag rules into the spec file until we required
dogtag as a component. If it wasn't pre-loaded them the rules loading
would fail because types would be missing.
This is to make initial installation and testing easier.
Use the --no_hbac_allow option on the command-line to disable this when
doing an install.
To remove it from a running server do: ipa hbac-del allow_all
We have had a state file for quite some time that is used to return
the system to its pre-install state. We can use that to determine what
has been configured.
This patch:
- uses the state file to determine if dogtag was installed
- prevents someone from trying to re-install an installed server
- displays some output when uninstalling
- re-arranges the ipa_kpasswd installation so the state is properly saved
- removes pkiuser if it was added by the installer
- fetches and installs the CA on both masters and clients
The old perl DS code for detection didn't set this so was often confused
about port availability. We had to match their behavior so the installation
didn't blow up. They fixed this a while ago, this catches us up.
- cache all interactive answers
- set non-interactive to True for the second run so nothing is asked
- convert boolean values that are read in
- require absolute paths for the external CA and signed cert files
- fix the invocation message for the second ipa-server-install run
We set a new port to be used with dogtag but IPA doesn't utilize it.
This also changes the way we determine which security database to use.
Rather than using whether api.env.home is set use api.env.in_tree.
Also print out a restart message after applying the custom subject.
It takes a while to restart dogtag and this lets the user know things
are moving forward.
This error could result in things not working properly but it should be
relatively easy to fix from the command-line. There is no point in
not installing at all due to this.
This creates a new role, replicaadmin, so a non-DM user can do
limited management of replication agreements.
Note that with cn=config if an unauthorized user performs a search
an error is not returned, no entries are returned. This makes it
difficult to determine if there are simply no replication agreements or
we aren't allowed to see them. Once the ipaldap.py module gets
replaced by ldap2 we can use Get Effective Rights to easily tell the
difference.
If the group exists but the user doesn't then useradd blows up
trying to create the user and group. So test to see if the group
exists and if it does pass along the -g argument to useradd.
Resolves#502960
certutil writes to the local directory when issuing a certificate.
Change to the security database directory when issuing the self-signed CA.
Also handle the case where a user is in a non-existent directory when doing
the install.
Also get rid of functions get_host_name(), get_realm_name() and
get_domain_name(). They used the old ipapython.config. Instead, use the
variables from api.env. We also change them to bootstrap() and
finalize() correctly.
Additionally, we add the dns_container_exists() function that will be
used in ipa-replica-prepare (next patch).
This moves code that does HTTP and HTTPS requests into a common library
that can be used by both the installer and the dogtag plugin.
These functions are not generic HTTP/S clients, they are designed
specifically to talk to dogtag, so use accordingly.
NSS is going to disallow all SSL renegotiation by default. Because of
this we need to always use the agent port of the dogtag server which
always requires SSL client authentication. The end user port will
prompt for a certificate if required but will attempt to re-do the
handshake to make this happen which will fail with newer versions of NSS.
The fake_mname for now doesn't exists but is a feature that will be
added in the near future. Since any unknown arguments to bind-dyndb-ldap
are ignored, we are safe to use it now.
