Include functions to manage IdM service using ipactl, in particular
starting, stopping and restarting the service.
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
In many cases it is impossible to investigate test failures of
environments where a trust to Active Directory is establishe without
Samba logs.
Collect Samba logs by default and make sure Samba is configured with
higher log levels if we are going to configure IPA to setup trust to
Active Directory.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Continuation of the commit 2eee5931d7:
Use AD-SUPPORT subpolicy when testing trust to Active Directory in FIPS
mode. This is required in FIPS mode due to AD not supporting Kerberos
AES-bases encryption types using FIPS-compliant PBKDF2 and KDF, as
defined in RFC 8009.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Cleanup up no longer used Pylint's disables where possible.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> New checker consider-using-dict-items. Emitted when iterating over
dictionary keys and then indexing the same dictionary with the key
within loop body.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Use AD-SUPPORT subpolicy when testing trust to Active Directory in FIPS
mode. This is required in FIPS mode due to AD not supporting Kerberos
AES-bases encryption types using FIPS-compliant PBKDF2 and KDF, as
defined in RFC 8009.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
OpenLDAP 2.6+ finally deprecated -h and -p options in all its command
line tools. They are not allowed anymore and cause ldap* tools to stop
hard with 'unknown option' error.
Fix this by always using -H url option instead. Deriving default value
for -H url from the configuration file still works, it is only -h and -p
that were deprecated.
See also: https://bugs.openldap.org/show_bug.cgi?id=8618
Fixes: https://pagure.io/freeipa/issue/9106
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Previously, `test_master_install_ca1` and `test_master_install_ca2`
attempt to create tempdirs on local host and later write some
content into the returned paths on remote host. This fails if
a remote host is a local one.
The existent `create_temp_file` function has been extended to
support `suffix` option of `mktemp`.
Fixes: https://pagure.io/freeipa/issue/9013
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
SSSD provides Kerberos plugin
> to tell the Kerberos libraries what Realm and which KDC to use.
It's useful to see what is happening during kinit in case of any
issues.
Related: https://pagure.io/freeipa/issue/8353
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
OpenSSH 8.7p1 changed the message logged on successful
authentication (see commit 9e1882ef6489a7dd16b6d7794af96629cae61a53).
As a result, the method run_ssh_cmd is failing and needs to be
adapted in order to be compatible with old and new openssh versions.
Fixes: https://pagure.io/freeipa/issue/8989
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The integration tests are using rpcclient delivered
by samba package. With samba 4.15, the options have
been renamed and "--use-kerberos=desired" must be
used instead of "-k".
(see
https://download.samba.org/pub/samba/rc/samba-4.15.0rc4.WHATSNEW.txt)
Adapt the test to be compatible with both old and new versions.
Fixes: https://pagure.io/freeipa/issue/8979
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
The install helpers used an invalid string check. ``('ubuntu')`` is
not a tuple. It's a string with superfluous parenthesis. A single-item
tuple would be ``('ubuntu',)``. It's recommended to use set literals to
avoid such mistakes.
Also check for 'debian' platform.
Fixes: https://pagure.io/freeipa/issue/8937
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The CA-less installation creates an external CA with the
subject CN=CA,O=Example Organization.
In order to test non-ascii subjects, use
CN=CA,O=Example Organization España
instead.
Related: https://pagure.io/freeipa/issue/8880
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
In order to test FIPS mode, the test is faking a user-space
FIPS environment by creating a file /var/tmp/userspace-fips
and bind-mounting this file as /proc/sys/crypto/fips_enabled
The security context needs to be properly set otherwise
/proc/sys/crypto/fips_enabled inherits the security context
unconfined_u:object_r:user_tmp_t:s0 and cannot be read,
resulting in the test seeing fips_mode=false.
Fixes: https://pagure.io/freeipa/issue/8868
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There are tons of useless information in test's runner log on
server uninstallation about list trust and certificates, such
as:
```
RUN ['trust', 'list']
pkcs11:id=%D2%87%B4%E3%DF%37%27%93%55%F6%56%EA%81%E5%36%CC%8C%1E%3F%BD;type=cert
type: certificate
label: ACCVRAIZ1
trust: anchor
category: authority
pkcs11:id=%F7%7D%C5%FD%C4%E8%9A%1B%77%64%A7%F5%1D%A0%CC%BF%87%60%9A%6D;type=cert
type: certificate
label: AC RAIZ FNMT-RCM
trust: anchor
category: authority
pkcs11:id=%52%D8%88%3A%C8%9F%78%66%ED%89%F3%7B%38%70%94%C9%02%02%36%D0;type=cert
type: certificate
label: Actalis Authentication Root CA
trust: anchor
category: authority
...
```
This improves the readability of test logs.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
There are tons of useless warnings about missing files on collecting
logs, such as:
```
tar: /var/log/ipaserver-kra-install.log: Warning: Cannot stat: No such file or directory
tar: /var/log/ipaepn.log: Warning: Cannot stat: No such file or directory
tar: /etc/NetworkManager/NetworkManager.conf: Warning: Cannot stat: No such file or directory
tar: /var/log/ipabackup.log: Warning: Cannot stat: No such file or directory
tar: /var/log/iparestore.log: Warning: Cannot stat: No such file or directory
...
```
Since `--ignore-failed-read` option is passed to tar the caller
doesn't care about not readable(mostly missing) files and these warnings
may be filtered out.
This improves the readability of test logs.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add a frontend to "ipa dns-update-system-records" to tasks.py.
Related: https://pagure.io/freeipa/issue/8534
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
wait_for_ipa_to_start(host) waits for ipactl to return RUNNING for all
IPA services on the specified host.
Related: https://pagure.io/freeipa/issue/8534
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
While "ktutil" does require a pseudo-terminal on particular systems to
operate, majority of programs do not need it.
At the same time invoking `ssh` with forced pseudo-terminal allocation
interferes with sessions multiplexing feature and increases connection
time. The increase can be as large as 10 seconds in certain cases which
leads to unexpected EOFs of pexpect utility.
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The test test_dnssec.py::TestInstallDNSSECFirst::test_resolvconf
checks that /etc/resolv.conf points to the localhost and
fails on fedora33 because systemd-resolved is in place
(and /etc/resolv.conf contains 127.0.0.53).
The test logic needs to be adapted. When systemd-resolved is
used, the test can check the output of "resolvectl dns".
Fixes: https://pagure.io/freeipa/issue/8695
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Do not check that host is resolvable.
systemd-resolved creates synthetic records for hosts in /etc/hosts.
If test hosts are listed in /etc/hosts on controller, no A records will
be created.
Related to https://pagure.io/freeipa/issue/8703
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
systemd-resolved enables positive and negative cache by default which
affects test scenarios where dns records are being created and deleted and
then verified using any tools that utilize default system resolver
(i.e. `dig` or `curl`).
Related to https://pagure.io/freeipa/issue/8703
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Set IPA master as nameserver on replica and client machines during default
installation. This will help to avoid manual configuration in test cases
which require members of IPA domain to be resolvable.
Related to https://pagure.io/freeipa/issue/8703
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Many test scenarios need to configure resolvers on test machines. Most
notable patterns are:
* using IPA master as DNS resolver on clients and replicas
* intentionally breaking name resolution
Now it is done by directly editing /etc/resolv.conf file. While being
simple this approach has following issues:
* NetworkManager restores this file periodically and on specific events
* This is not how users are expected to manage resolvers on modern
systems with NetworkManager and systemd-resolved.
This patch introduces three classes for main types of resolvers management:
* plain file
* NetworkManager
* systemd-resolved
For each resolver manager the native way of configuring of nameserves is
used: direct editing for /etc/resolv.conf or drop-in config files for
NM and resolved.
The type of resolver is automatically detected for each host and an
appropriate instance is added to Host object.
The Resolver class (and it's subclasses) provide convenience functions
for changing nameservers and restoring the original config.
During all operations (backup, modify, restore) it checks that resolver
configuration has not been altered unexpectedly and raises exception if it
was. This helps to detect unexpected changes in resolvers.
Related to https://pagure.io/freeipa/issue/8703
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Those config files are valuable for debugging issues relate to DNS
resolvers.
Related to https://pagure.io/freeipa/issue/8703
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Handle package removal without taking dependencies into account.
E.g. add frontends for rpm -e --nodeps.
Related: ipatests/pytest_ipa/integration/tasks.py
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
`ktutil` is a REPL-style utility that can be controlled only interactively.
The common approach of sending commands to stdin does not work with it on
systems where `readline` library has version less then 8.0 due to a bug
in that version.
With `pexpect` we avoid this bug because it emulates the terminal
when interacting with spawned process instead of simply sending all input
to stdin.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The pexpect module can be used for controlling and testing interactive
command-line programs. The wrapper adds testing-oriented features like
logging and automatic process termination and default check for process
exit status.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
One of the files that are collected after each test is /etc/resolv.conf.
In Fedora 33 this file is actually a symlink. `tar` does not follow
symlinks by default which results in either a broken link in test
artifacts or a symlink pointing to local file on the tests controller
machine.
Fixed by instructing `tar` to resolve the symlinks, so that actual file
pointed by symlink is stored in test artifacts.
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Samba 4.13+ in Fedora 33+ and RHEL 8.4+ defaults to Kerberos
authentication. This means user name used for authentication must be
mapped to a target realm.
We have to remove trust on AD side first before removing it locally or
otherwise MIT Kerberos might not be able to locate DCs from AD as
removal of the trust information would cause SSSD to clear the details
for a KDC locator plugin as well.
For the test that modifies AD DNS zone on IPA side to inject unreachable
DCs addresses, the configuration has to be reverted first, to allow
plain 'kinit' during removal of trust to reach AD DCs directly.
Fixes: https://pagure.io/freeipa/issue/8678
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Changes in https://pagure.io/freeipa/issue/8655 made it impossible
to use AD admin name without domain part in "ipa trust-add" command to
establish external trust with an AD tree domain.
Also use fully qualified admin name by default in all trust related tests
to reduce abiguity
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
- change log level for replication debugging
According to the docs:
```
default level of logging(16384) used for critical errors and other
messages that are always written to the error log. Messages at this
level are always included in the error log, regardless of the log
level setting.
```
- always flush the access logs to filesystem
During the testing access logs may be written with delay, this
results in logs are not collected by this test node, but for example,
the next one.
- as of now, the changes on `cn=config` are made after the installation
of server or replica. If an error occurs during these stages, then the
actual log level will be the default and not as expected.
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Test that IPA certs are removed after the server uninstall
process. This is needed since if these certs are not
removed from the system store, further installations
will fail.
Related: https://pagure.io/freeipa/issue/8614
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
The tasks module provides a method to clear sssd cache,
but the method does not remove the file /var/lib/sss/mc/initgroups.
Update the method to also remove this file.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a new upgrade test. Scenario:
- create an empty /var/lib/pki/pki-tomcat/kra directory
- call ipa-server-upgrade
With issue 8596, the upgrade fails because it assumes KRA is
installed. With the fix, ipa-server-upgrade completes successfully.
Related: https://pagure.io/freeipa/issue/8596
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The basic idea is:
* add a user with a password
* kinit with a bad password for the user until lockout
* on another server administratively reset the password
* wait for replication to finish
* kinit on the original server again and the user should
be able to kinit again meaning the lockout was removed
https://pagure.io/freeipa/issue/8551
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
