In order to have control over the order that updates are applied
a numbering system was created for the update files. These values
were not actually used.
The updates were sorted by DN length and in most cases this was
adequate for proper function. The exception was with roles where
in some cases a role was added as a member of a permission before
the role itself was added so the memberOf value was never created.
Now updates are computed and applied in blocks of 10.
https://fedorahosted.org/freeipa/ticket/3377
The CA cert was not loaded, so if it was missing from the PKCS#12 file,
installation would fail.
Pass the cert filename to the server installers and include it in
the NSS DB.
Part of the work for: https://fedorahosted.org/freeipa/ticket/3363
The plugin is configured unconditionally (i.e. does not check if
IPA was configured with DNS) as the plugin is needed on all
replicas to prevent objectclass violations due to missing SOA
serial in idnsZone objectclass. The violation could happen if just
one replica configured DNS and added a new zone.
https://fedorahosted.org/freeipa/ticket/3347
Attempt to automatically save DNA ranges when a master is removed.
This is done by trying to find a master that does not yet define
a DNA on-deck range. If one can be found then the range on the deleted
master is added.
If one cannot be found then it is reported as an error.
Some validation of the ranges are done to ensure that they do overlap
an IPA local range and do not overlap existing DNA ranges configured
on other masters.
http://freeipa.org/page/V3/Recover_DNA_Rangeshttps://fedorahosted.org/freeipa/ticket/3321
Reorganize ipa-server-instal so that DS (and NTP server) installation
only happens in step one.
Change CAInstance to behave correctly in two-step install.
Add an `init_info` method to DSInstance that includes common
attribute/sub_dict initialization from create_instance and create_replica.
Use it in ipa-server-install to get a properly configured DSInstance
for later tasks.
https://fedorahosted.org/freeipa/ticket/3459
The DS is installed before the CA cert is generated. Trying to
add the cert to LDAP before it exists resulted in a nasty-looking
error message.
This moves the cert upload to after the CA cert is ready and the
certdb is created.
Move the cert upload to after thecertdb is generated.
https://fedorahosted.org/freeipa/ticket/3375
IPA installer sometimes tries to connect to the Directory Server
via loopback address 127.0.0.1. However, the Directory Server on
pure IPv6 systems may not be listening on this address. This address
may not even be available.
Rather use the FQDN of the server when connecting to the DS to fix
this issue and make the connection consistent ldapmodify calls which
also use FQDN instead of IP address.
https://fedorahosted.org/freeipa/ticket/3355
This brings /etc/dirsrv/slapd-REALM/certmap.conf under IPA control.
The file is overwritten on upgrades.
This ensures that the cert for the ipaca user is recognized when
ipa-ca-install is run on older masters.
New servers that are installed with dogtag 10 instances will use
a single database instance for dogtag and IPA, albeit with different
suffixes. Dogtag will communicate with the instance through a
database user with permissions to modify the dogtag suffix only.
This user will authenticate using client auth using the subsystem cert
for the instance.
This patch includes changes to allow the creation of masters and clones
with single ds instances.
Forces more consistency into ipa-server-install output. All
descriptions of services that are not instances of
SimpleServiceInstance are now in the following format:
<Description> (<Service Name>)
Furthermore, start_creation method has been modified to support
custom start and end messages. See documentation for more info.
https://fedorahosted.org/freeipa/ticket/3059
Many attributes in IPA (e.g. manager, memberuser, managedby, ...)
are used to store DNs of linked objects in IPA (users, hosts, sudo
commands, etc.). However, when the linked objects is deleted or
renamed, the attribute pointing to it stays with the objects and
thus may create a dangling link causing issues in client software
reading the data.
Directory Server has a plugin to enforce referential integrity (RI)
by checking DEL and MODRDN operations and updating affected links.
It was already used for manager and secretary attributes and
should be expanded for the missing attributes to avoid dangling
links.
As a prerequisite, all attributes checked for RI must have pres
and eq indexes to avoid performance issues. Thus, the following
indexes are added:
* manager (pres index only)
* secretary (pres index only)
* memberHost
* memberUser
* sourcehost
* memberservice
* managedby
* memberallowcmd
* memberdenycmd
* ipasudorunas
* ipasudorunasgroup
Referential Integrity plugin is updated to enforce RI for all these
attributes. Unit tests covering RI checks for all these attributes
were added as well.
Note: this update will only fix RI on one master as RI plugin does
not check replicated operations.
https://fedorahosted.org/freeipa/ticket/2866
Due to recent addition of ID range support to DsInstance, the class
could no longer be instantiated when realm_name was passed but
ID range parameters were not. This condition broke winsync agreements
creation in ipa-replica-manage.
Make sure that ID range computation in DsInstance does not crash in
this cases so that winsync replica can be created. Also convert --binddn
option of ipa-replica-manage script to IPA native DN type so that
setup_agreement does not crash.
https://fedorahosted.org/freeipa/ticket/2987
* Convert every string specifying a DN into a DN object
* Every place a dn was manipulated in some fashion it was replaced by
the use of DN operators
* Add new DNParam parameter type for parameters which are DN's
* DN objects are used 100% of the time throughout the entire data
pipeline whenever something is logically a dn.
* Many classes now enforce DN usage for their attributes which are
dn's. This is implmented via ipautil.dn_attribute_property(). The
only permitted types for a class attribute specified to be a DN are
either None or a DN object.
* Require that every place a dn is used it must be a DN object.
This translates into lot of::
assert isinstance(dn, DN)
sprinkled through out the code. Maintaining these asserts is
valuable to preserve DN type enforcement. The asserts can be
disabled in production.
The goal of 100% DN usage 100% of the time has been realized, these
asserts are meant to preserve that.
The asserts also proved valuable in detecting functions which did
not obey their function signatures, such as the baseldap pre and
post callbacks.
* Moved ipalib.dn to ipapython.dn because DN class is shared with all
components, not just the server which uses ipalib.
* All API's now accept DN's natively, no need to convert to str (or
unicode).
* Removed ipalib.encoder and encode/decode decorators. Type conversion
is now explicitly performed in each IPASimpleLDAPObject method which
emulates a ldap.SimpleLDAPObject method.
* Entity & Entry classes now utilize DN's
* Removed __getattr__ in Entity & Entity clases. There were two
problems with it. It presented synthetic Python object attributes
based on the current LDAP data it contained. There is no way to
validate synthetic attributes using code checkers, you can't search
the code to find LDAP attribute accesses (because synthetic
attriutes look like Python attributes instead of LDAP data) and
error handling is circumscribed. Secondly __getattr__ was hiding
Python internal methods which broke class semantics.
* Replace use of methods inherited from ldap.SimpleLDAPObject via
IPAdmin class with IPAdmin methods. Directly using inherited methods
was causing us to bypass IPA logic. Mostly this meant replacing the
use of search_s() with getEntry() or getList(). Similarly direct
access of the LDAP data in classes using IPAdmin were replaced with
calls to getValue() or getValues().
* Objects returned by ldap2.find_entries() are now compatible with
either the python-ldap access methodology or the Entity/Entry access
methodology.
* All ldap operations now funnel through the common
IPASimpleLDAPObject giving us a single location where we interface
to python-ldap and perform conversions.
* The above 4 modifications means we've greatly reduced the
proliferation of multiple inconsistent ways to perform LDAP
operations. We are well on the way to having a single API in IPA for
doing LDAP (a long range goal).
* All certificate subject bases are now DN's
* DN objects were enhanced thusly:
- find, rfind, index, rindex, replace and insert methods were added
- AVA, RDN and DN classes were refactored in immutable and mutable
variants, the mutable variants are EditableAVA, EditableRDN and
EditableDN. By default we use the immutable variants preserving
important semantics. To edit a DN cast it to an EditableDN and
cast it back to DN when done editing. These issues are fully
described in other documentation.
- first_key_match was removed
- DN equalty comparison permits comparison to a basestring
* Fixed ldapupdate to work with DN's. This work included:
- Enhance test_updates.py to do more checking after applying
update. Add test for update_from_dict(). Convert code to use
unittest classes.
- Consolidated duplicate code.
- Moved code which should have been in the class into the class.
- Fix the handling of the 'deleteentry' update action. It's no longer
necessary to supply fake attributes to make it work. Detect case
where subsequent update applies a change to entry previously marked
for deletetion. General clean-up and simplification of the
'deleteentry' logic.
- Rewrote a couple of functions to be clearer and more Pythonic.
- Added documentation on the data structure being used.
- Simplfy the use of update_from_dict()
* Removed all usage of get_schema() which was being called prior to
accessing the .schema attribute of an object. If a class is using
internal lazy loading as an optimization it's not right to require
users of the interface to be aware of internal
optimization's. schema is now a property and when the schema
property is accessed it calls a private internal method to perform
the lazy loading.
* Added SchemaCache class to cache the schema's from individual
servers. This was done because of the observation we talk to
different LDAP servers, each of which may have it's own
schema. Previously we globally cached the schema from the first
server we connected to and returned that schema in all contexts. The
cache includes controls to invalidate it thus forcing a schema
refresh.
* Schema caching is now senstive to the run time context. During
install and upgrade the schema can change leading to errors due to
out-of-date cached schema. The schema cache is refreshed in these
contexts.
* We are aware of the LDAP syntax of all LDAP attributes. Every
attribute returned from an LDAP operation is passed through a
central table look-up based on it's LDAP syntax. The table key is
the LDAP syntax it's value is a Python callable that returns a
Python object matching the LDAP syntax. There are a handful of LDAP
attributes whose syntax is historically incorrect
(e.g. DistguishedNames that are defined as DirectoryStrings). The
table driven conversion mechanism is augmented with a table of
hard coded exceptions.
Currently only the following conversions occur via the table:
- dn's are converted to DN objects
- binary objects are converted to Python str objects (IPA
convention).
- everything else is converted to unicode using UTF-8 decoding (IPA
convention).
However, now that the table driven conversion mechanism is in place
it would be trivial to do things such as converting attributes
which have LDAP integer syntax into a Python integer, etc.
* Expected values in the unit tests which are a DN no longer need to
use lambda expressions to promote the returned value to a DN for
equality comparison. The return value is automatically promoted to
a DN. The lambda expressions have been removed making the code much
simpler and easier to read.
* Add class level logging to a number of classes which did not support
logging, less need for use of root_logger.
* Remove ipaserver/conn.py, it was unused.
* Consolidated duplicate code wherever it was found.
* Fixed many places that used string concatenation to form a new
string rather than string formatting operators. This is necessary
because string formatting converts it's arguments to a string prior
to building the result string. You can't concatenate a string and a
non-string.
* Simplify logic in rename_managed plugin. Use DN operators to edit
dn's.
* The live version of ipa-ldap-updater did not generate a log file.
The offline version did, now both do.
https://fedorahosted.org/freeipa/ticket/1670https://fedorahosted.org/freeipa/ticket/1671https://fedorahosted.org/freeipa/ticket/1672https://fedorahosted.org/freeipa/ticket/1673https://fedorahosted.org/freeipa/ticket/1674https://fedorahosted.org/freeipa/ticket/1392https://fedorahosted.org/freeipa/ticket/2872
When setting up AD trusts support, ipa-adtrust-install utility
needs to be run as:
- root, for performing Samba configuration and using LDAPI/autobind
- kinit-ed IPA admin user, to ensure proper ACIs are granted to
fetch keytab
As result, we can get rid of Directory Manager credentials in ipa-adtrust-install
https://fedorahosted.org/freeipa/ticket/2815
Many functions use low-level socket interface for connection or
various checks. However, most of the time we don't respect
automatic address family detection but rather try to force our
values. This may cause either redundat connection tries when an
address family is disabled on system tries or even crashes
when socket exceptions are not properly caught.
Instead of forcing address families to socket, rather use
getaddrinfo interface to automatically retrieve a list of all
relevant address families and other connection settings when
connecting to remote/local machine or binding to a local port.
Now, we will also fill correctly all connection parameters like
flowinfo and scopeid for IPv6 connections which will for example
prevent issues with scoped IPv6 addresses.
bind_port_responder function was changed to at first try to bind
to IPv6 wildcard address before IPv4 as IPv6 socket is able to
accept both IPv4 and IPv6 connections (unlike IPv4 socket).
nsslib connection was refactored to use nss.io.AddrInfo class to
get all the available connections. Socket is now not created by
default in NSSConnection class initializer, but rather when the
actual connection is being made, becase we do not an address family
where connection is successful.
https://fedorahosted.org/freeipa/ticket/2913https://fedorahosted.org/freeipa/ticket/2695
All service start/restart currently go through ipapython/platform so
move the "wait for service to start" code there as well.
A dictionary of known services and ports to wait on is defined in base.py
This is referenced by the platforms by instance name to determine what
to wait for. For the case of dirsrv if we get that as a plain name
(no specific instance) it is assumed to be the main IPA service.
https://fedorahosted.org/freeipa/ticket/2375https://fedorahosted.org/freeipa/ticket/2610
We want to always resolve TGS requests even if the user mistakenly sends a
request for a service ticket where the fqdn part contain upper case letters.
The actual implementation follows hints set by KDC. When AP_REQ is done, KDC
sets KRB5_FLAG_ALIAS_OK and we obey it when looking for principals on TGS requests.
https://fedorahosted.org/freeipa/ticket/1577
IPA has some unused code from abandoned features (Radius, ipa 1.x user
input, commant-line tab completion), as well as some duplicate utilities.
This patch cleans up the utility modules.
Duplicate code consolidated into ipapython.ipautil:
{ipalib.util,ipaserver.ipautil,ipapython.ipautil}.realm_to_suffix
{ipaserver,ipapython}.ipautil.CIDict
(with style improvements from the ipaserver version)
{ipapython.entity,ipaserver.ipautil}.utf8_encode_value
{ipapython.entity,ipaserver.ipautil}.utf8_encode_values
ipalib.util.get_fqdn was removed in favor of the same function in
ipaserver.install.installutils
Removed unused code:
ipalib.util:
load_plugins_in_dir
import_plugins_subpackage
make_repr (was imported but unused; also removed from tests)
ipapython.ipautil:
format_list
parse_key_value_pairs
read_pairs_file
read_items_file
user_input_plain
AttributeValueCompleter
ItemCompleter
ipaserver.ipautil:
get_gsserror (a different version exists in ipapython.ipautil)
ipaserver.ipautil ended up empty and is removed entirely.
https://fedorahosted.org/freeipa/ticket/2650
We don't need to do anything with the state but if it exists in
the sysrestore index at the end of uninstallation the uninstaller will
complain about it.
https://fedorahosted.org/freeipa/ticket/2637
certmonger now has the ability to execute a script when it renews a
certificate. This can be used to automatically restart servers so
the certificate doesn't expire in the running server.
https://fedorahosted.org/freeipa/ticket/2050
Ticket #2502
* remove the "running" flag from backup_state in cainstance.py and
dsinstance.py because it does not provide the correct
information. In cainstance the running flag was never referenced
because restarting dirsrv instances occurs later in dsinstance. In
dsinstance when the running flag is set it incorrectly identifed the
PKI ds instance configured earlier by cainstance. The intent was to
determine if there were any ds instances other than those owned by
IPA which will need to be restarted upon uninstall. Clearly the PKI
ds instance does not qualify. We were generating a traceback when at
the conclusion of dsinstance.uninstall we tried to start the
remaining ds instances as indicated by the running flag, but there
were none to restart (because the running flag had been set as a
consequence of the PKI ds instance).
* We only want to restart ds instances if there are other ds instances
besides those owned by IPA. We shouldn't be stopping all ds
instances either, but that's going to be covered by another
ticket. The fix for restarting other ds instances at the end of
uninstall is to check and see if there are other ds instances
remaining after we've removed ours, if so we restart them. Also it's
irrelevant if those ds instances were not present when we installed,
it only matters if they exist after we restore things during
uninstall. If they are present we have to start them back up because
we shut them down during uninstall.
* Add new function get_ds_instances() which returns a list of existing
ds instances.
* fixed error messages that incorrectly stated it "failed to restart"
a ds instance when it should be "failed to create".
The server installation failed on F17 due to permission problem.
The /var/lib/dirsrv/boot.ldif was previously owned and only readable
by root. It is now owned by DS user dirsrv.
Ticket #2544
Update ipaSudoRule objectClass on upgrades to add new attributes.
Ensure uniqueness of sudoOrder in rules.
The attributes sudoNotBefore and sudoNotAfter are being added to
schema but not as Params.
https://fedorahosted.org/freeipa/ticket/1314
We don't want to run the risk of adding a user, uninstalling it,
the system adding a new user (for another package install for example)
and then re-installing IPA. This wreaks havoc with file and directory
ownership.
https://fedorahosted.org/freeipa/ticket/2423
For some reason lost to history the sub_dict in dsinstance and
cainstance used FQHN instead of FQDN. This made upgrade scripts not
work reliably as the variable might be different depending on context.
Use FQDN universally instead.
There are two reasons for the plugin framework:
1. To provide a way of doing manual/complex LDAP changes without having
to keep extending ldapupdate.py (like we did with managed entries).
2. Allows for better control of restarts.
There are two types of plugins, preop and postop. A preop plugin runs
before any file-based updates are loaded. A postop plugin runs after
all file-based updates are applied.
A preop plugin may update LDAP directly or craft update entries to be
applied with the file-based updates.
Either a preop or postop plugin may attempt to restart the dirsrv instance.
The instance is only restartable if ipa-ldap-updater is being executed
as root. A warning is printed if a restart is requested for a non-root
user.
Plugins are not executed by default. This is so we can use ldapupdate
to apply simple updates in commands like ipa-nis-manage.
https://fedorahosted.org/freeipa/ticket/1789https://fedorahosted.org/freeipa/ticket/1790https://fedorahosted.org/freeipa/ticket/2032
change default_logger_level to debug in configure_standard_logging
add new ipa_log_manager module, move log_mgr there, also export
root_logger from log_mgr.
change all log_manager imports to ipa_log_manager and change
log_manager.root_logger to root_logger.
add missing import for parse_log_level()
We no longer need to enforce that no 389-ds instances exist on an IPA
server. Checking that the ports exist should be enough.
This used to be one mechanism we used to check to see if IPA was already
installed. We have a better mechanism now.
https://fedorahosted.org/freeipa/ticket/1735
https://fedorahosted.org/freeipa/ticket/1794
If the master does not yet support the total update list feature we still
run the memberof fixup task and not fail to replicate due to the new
attribute not being settable.
Jointly-developed-with: Simo Sorce <ssorce@redhat.com>
Jointly-developed-with: Nathank Kinder <nkinder@redhat.com>
At one point in time we couldn't depend on the 389-ds having
the managed entries plugin so this code was added to support
both versions. It is no longer needed.
https://fedorahosted.org/freeipa/ticket/1242
Repoint cn=Managed Entries,cn=plugins,cn=config in common_setup
Create: cn=Managed Entries,cn=etc,$SUFFIX
Create: cn=Definitions,cn=Managed Entries,cn=etc,$SUFFIX
Create: cn=Templates,cn=Managed Entries,cn=etc,$SUFFIX
Create method for dynamically migrating any and all custom Managed Entries
from the cn=config space into the new container.
Separate the connection creation during update so that a restart can
be performed to initialize changes before performing a delete.
Add wait_for_open_socket() method in installutils
https://fedorahosted.org/freeipa/ticket/1708
