configure is easiest option how to automatically generate POTFILES.in.
Attempts to add it to po/Makefile* have big potential to create cyclic
depedencies and cause other trouble.
Given how rare operation adding a source file is, I think it is sufficient
to document that configure needs to be run again after adding a source file
with translatable strings.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
The target was added to top-level Makefile.am as well so the maintainer
does not need to jump between directories when doing Zanata pull/push
and strip-po.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
We now use standard framework generatedby "gettextize" utility.
It has two limitations which I do not consider sufficiently important
to invest into hand-made solution:
1. It can automatically gather strings only from files which have some
file extension like .c or .py. Right now we do not have any
translatable strings in Python files without extensions. Given that these
files will be removed from source tree and replaced with entry points
from setuptools I do not see a reason to invest into supporting this.
2. It does not automatically strip untranslated strings from po files.
This is a manual step in mainteiner's in workflow anyway so I will
add separate Makefile target for it later on.
This commit contains gettextize instrastructure + filled-in files
Makevars and POTFILES.in.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Setuptools will print only warnings. The option has to be used before
setuptools command specification, otherwise it will not apply to sub-commands.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This is a huge hack. rpms target will touch VERSION.m4 file. This change
is then detected by automake Makefiles which subsequently re-execute configure
and make.
We have to workaround fact that variables in new make targets
(executed after new configure) are different than original ones.
Also, we have to 'bake-in' precise snapshot version from Git to
VERSION.m4 inside of RPM tarball so the RPM does not depend on git
anymore.
All this magic slows build down a bit.
Do not enable IPA_VERSION_IS_GIT_SNAPSHOT if you want fastest possible builds.
The option IPA_VERSION_IS_GIT_SNAPSHOT is now enabled by default as it
was before we started the build system refactoring effort.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Default format used by Autotools limits length of paths to
99 characters. This is not enough for tarballs with Git snapshots.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
At the time of this writting
https://fedoraproject.org/wiki/Packaging:Guidelines#Manpages
says this:
When installing man pages, note that they should be installed uncompressed
as the build system will compress them as needed. The compression method
may change, so it is important to reference the pages in the %files section
with a pattern that takes this into account:
%{_mandir}/man1/foo.1*
Removing the compression also allows to remove several install-data-hook
targets from Makefile.am files.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
At the same time, I've renamed tmpfilesd config file to static name
"ipa.conf" instead of using package-specific name. It had no purpose
and just complicated build and packaging.
Variable substitution into configuration has to be done in Makefile
and not in Autoconf as documented in:
Autoconf v2.69 manual chapter 4.8.2 Installation Directory Variables:
... Most of these variables have values that rely on prefix or
exec_prefix. ... Similarly, you should not rely on AC_CONFIG_FILES
to replace bindir and friends in your shell scripts and other files;
instead, let make manage their replacement.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The name from configure.ac is used when generating tarball.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This makes easier to use --prefix with make install.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This version builds only one version of Python packages. If you want to
build for Python 2 & 3 call configure twice using different --with-python
or specify PYTHON variable when calling make.
dist-hook is using SOURCES.txt file from egg-info.
According to Petr Viktorin this should be enough for our purposes
and avoids need to create plugins for setuptools.
Currently VPATH builds do not work for various reasons.
This should be fixed later on.
Most credit goes to these guys:
Christian Heimes <cheimes@redhat.com>
Petr Viktorin <pviktori@redhat.com>
Kevin Brown <kevin@kevin-brown.com>
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The neither build nor dist targets work completely. This is temporary
breakage enabling further work.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Version information is now in VERSION.m4 instead of VERSION.
Makefile target version-update was minimized and configure can be run
before make. Makefile temporarily contains hardcoded version which has
to match the one specified in VERSION.m4.
This is preparatory step which will allow us to replace hand-made
Makefile with one generated by Automake.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The configure script checks for libcurl, but it is never actually used
anywhere.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
The original approach with __path__ implemented
by 8f98fa1bd5 broke Pylint:
We decided to resort back to symlinks as it is easiest solution
which does not break pylint in weird ways.
This commit introduces configure --with-ipaplatform option.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
It turns out that default error handling prints very useful messages
which are way better than hand-made error handling without any hints.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Explicit check for symbols is unncecessary because libini_config >= 1.2.0
contains all the symbols we need.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Use package config instead of checking headers.
Package config is faster because it does not invoke compiler
and guarantees proper linking flags because these are provided
by package maintainer instead of hardcoded into build system.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Use package config instead of checking headers.
Package config is faster because it does not invoke compiler
and guarantees proper linking flags because these are provided
by package maintainer instead of hardcoded into build system.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Use package config instead of checking headers.
Package config is faster because it does not invoke compiler
and guarantees proper linking flags because these are provided
by package maintainer instead of hardcoded into build system.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Use package config instead of checking headers.
Package config is faster because it does not invoke compiler
and guarantees proper linking flags because these are provided
by package maintainer instead of hardcoded into build system.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
FreeIPA moved to Zanata a while ago. References to Transifex were just
leftovers.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Translations are need for client as well. This move is done to remove
dependency between client and install subdirectories.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
At the same time, I removed unnecessary checks for mkdir etc. and added
missing check for gzip.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This broke ONLY_CLIENT option in SPEC file. It will be fixed later on.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This is autoconf way of doing things. It should allow us to enable
subdir-objects automake option and stay compatible with future versions
of automake.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Top-level Makefile is still not managed by Automake (e.g. hand-made).
This is preparatory work. Other configure.ac files will be gradually
merged into the top-level one. After that we will be able to throw-away
the hand-made top-level Makefile and use Automake for everything.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
