Replace all uses of virtual profiles with `dogtag-ipa-ca-renew-agent-reuse`
and remove profile from the IPA CA certificate tracking request.
This prevents virtual profiles from making their way into CSRs and in turn
being rejected by certain CAs. This affected the IPA CA CSR with Microsoft
CS in particular.
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Add a switch which makes `dogtag-ipa-ca-renew-agent-submit` reuse the
existing certificate rather than request a new one from the CA while
maintaining LDAP replication of the certificate.
Make this available as a new `dogtag-ipa-ca-renew-agent-reuse` certmonger
CA.
This allows redoing the LDAP replication and reexecuting pre- and post-save
commands of a tracking request without reissuing the certificate.
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Use Dogtag's `caCACert` CA certificate profile rather than the
`ipaCACertRenewal` virtual profile for lightweight CA certificates.
The `ipaCACertRenewal` virtual profile adds special handling of externally
signed CA certificates and LDAP replication of issued certificates on top
of `caCACert`, neither of which is relevant for lightweight CA
certificates.
Remove all of the special casing of lightweight CA certificates from
dogtag-ipa-ca-renew-agent-submit.
Make sure existing lightweight CA certmonger tracking requests are updated
on server upgrade.
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Do not bypass the renewal master check when a non-virtual profile is used
in dogtag-ipa-ca-renew-agent-submit.
This fixes dogtag-ipa-ca-renew-agent not respecting the CA renewal master
setting for certificates tracked with a real profile. (Note that there
currently aren't any such certificates tracked by us.)
Request the RA certificate using dogtag-submit rather than
dogtag-ipa-ca-renew-agent-submit as the CA renewal master setting is not
available so early in the install process.
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Refresh the ca_host property of the Dogtag's RestClient class when
it's requested as a context manager.
This solves the problem which would occur on DL0 when installing
CA which needs to perform a set of steps against itself accessing
8443 port. This port should however only be available locally so
trying to connect to remote master would fail. We need to make
sure the right CA host is accessed.
https://pagure.io/freeipa/issue/6878
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Previous versions of FreeIPA add password to the ra.p12 file
contained in the password-protected tarball. This was forgotten
about in the recent changes and fixed now.
https://pagure.io/freeipa/issue/6878
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Previously system users needed by FreeIPA server services was created during
ipa-server-install. This led to problem when DBus policy was configured during
package installation but the user specified in the policy didn't exist yet
(and potentionally similar ones). Now the users will be created in package %pre
section so all users freeipa-server package needs exist before any installation
or configuration begins.
Another possibility would be using systemd-sysusers(8) for this purpose but
given that systemd is not available during container build the traditional
approach is superior.
Also dirsrv and pkiuser users are no longer created by FreeIPA instead it
depends on 389ds and dogtag to create those users.
https://pagure.io/freeipa/issue/6743
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Dogtag is currently unable to generate a PIN it could use for
an NSS database creation in FIPS. Generate it for them so that
we don't fail.
https://pagure.io/freeipa/issue/6824
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Time estimates have been updated to be more accurate. Only
tasks that are estimated to take longer than 10 seconds have
the estimate displayed.
https://pagure.io/freeipa/issue/6596
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Currently, it was only possible to request an NSS certificate
via certmonger. Merged start_tracking methods and refactored them
to allow for OpenSSL certificates tracking.
https://fedorahosted.org/freeipa/ticket/5695
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Replaced NSSConnection with Python's httplib.HTTPSConnection.
This class is OpenSSL-based.
A client certificate with a private key is required to authenticate
against the certificate server. We facilitate the RA_AGENT_PEM which
already exists.
https://fedorahosted.org/freeipa/ticket/5695
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The ra_db argument to CAInstance init is a constant so it can
be removed. This constant corresponds to the default CertDB directory
and since CertDB now passes passwords to its inner NSSDatabase instance
we do need to care about having our own run_certutil() method.
https://fedorahosted.org/freeipa/ticket/5695
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
When ipa-server-install configures PKI, it provides a configuration file
with the parameter pki_ajp_host set to ::1. This parameter is used to configure
Tomcat redirection in /etc/pki/pki-tomcat/server.xml:
<Connector port="8009"
protocol="AJP/1.3"
redirectPort="8443"
address="::1" />
ie all requests to port 8009 are redirected to port 8443 on address ::1.
If the /etc/hosts config file does not define ::1 for localhost, then AJP
redirection fails and replica install is not able to request a certificate
for the replica.
Since PKI has been fixed (see PKI ticket 2570) to configure by default the AJP
redirection with "localhost", FreeIPA does not need any more to override
this setting.
The code now depends on pki 10.3.5-11 which provides the fix in the template
and the upgrade.
https://fedorahosted.org/freeipa/ticket/6575
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
This is in preparation for separating out the user under which the
ipa api framework runs as.
This commit also removes certs.NSS_DIR to avoid confusion and replaces
it where appropriate with the correct NSS DB directory, either the old
HTTPD_ALIAS_DIR ot the RA DB IPA_RADB_DIR. In some cases its use is
removed altogether as it was simply not necessary.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Currently only the "subject base" of the IPA CA subject DN can be
customised, via the installer's --subject-base option. The RDN
"CN=Certificate Authority" is appended to form the subject DN, and
this composition is widely assumed.
Some administrators need more control over the CA subject DN,
especially to satisfy expectations of external CAs when the IPA CA
is to be externally signed.
This patch adds full customisability of the CA subject DN.
Specifically:
- Add the --ca-subject option for specifying the full IPA CA subject
DN. Defaults to "CN=Certificate Authority, O=$SUBJECT_BASE".
- ipa-ca-install, when installing a CA in a previous CA-less
topology, updates DS certmap.conf with the new new CA subject DN.
- DsInstance.find_subject_base no longer looks in certmap.conf,
because the CA subject DN can be unrelated to the subject base.
Fixes: https://fedorahosted.org/freeipa/ticket/2614
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
During the rebase of commit 822e1bc82a on top
of commit 808b1436b4, the call to track the
RA agent certificate with certmonger was accidentally removed from
ipa-replica-install.
Put the call back so that the certificate is tracked after replica install.
https://fedorahosted.org/freeipa/ticket/6392
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
SHARE_DIR and PLUGIN_SHARE_DIR depend on ipaplatform.
Replace all uses of SHARE_DIR with paths.USR_SHARE_IPA_DIR and remove
both SHARE_DIR and PLUGIN_SHARE_DIR.
https://fedorahosted.org/freeipa/ticket/6474
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The Service class now accepts keytab path and service name part of Kerberos
principal as members. Kerberos principal is turned into a property computed
from service prefix, FQDN and realm. the handling of Kerberos principals and
keytabs in service installers was changed to use class members instead of
copy-pasted constants. This shall aid in the future refactoring of
principal/keytab handling code.
https://fedorahosted.org/freeipa/ticket/6392
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
pki-tomcat would have been restarted in install and replicainstall
for backward compatibility reasons. As Dogtag 9 is not supported
anymore, we can move this restart only for DL0 replica installation.
https://fedorahosted.org/freeipa/ticket/6392
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
In order to reduce coupling between httpinstance and other service installers,
the HTTP installer is now tasked with initialization of /etc/httpd/alias (RA
agent database) in the beginning of server/replica installation
Part of https://fedorahosted.org/freeipa/ticket/6429
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
