Test that:
1. With ACME enabled, SAN is required
2. With ACME disabled, SAN is not required
Also verify the ipa-acme-manage status command.
https://pagure.io/freeipa/issue/8498
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Traditionally in IPA 0 = success, 1 = error and then
specific error messages follow from that. Shift the
ipa-acme-manage return codes for "not installed" and
"not a CA" up by one.
https://pagure.io/freeipa/issue/8498
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
ACME requires an ipa-ca SAN to have a fixed URL to connect to.
If the Apache certificate is replaced by a 3rd party cert then
it must provide this SAN otherwise it will break ACME.
https://pagure.io/freeipa/issue/8498
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
New validation efforts in 389-ds-base require that the backend entry for
a database be created before the mapping tree entry. This enforces that
the mapping tree entry (the suffix) actually belongs to an existing backend.
For IPA we simply need to reverse the order of the backend vs mapping tree
creation in cainstance.py -> __create_ds_db()
Fixes: https://pagure.io/freeipa/issue/8558
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Nightly test failure was seen for test_ipahealthcheck_ds_encryption
The test was failing since @pytest.fixture was not specified before
the function modify_tls
Ref: https://pagure.io/freeipa/issue/8560
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Collect the let's encrypt client log for any potential
debug purposes.
https://pagure.io/freeipa/issue/8524
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Test if ACME service is enabled on replica if eabled on
server. This is to check the centralize enable/disable
from single host.
ipatests: Test if ACME is enabled on replica when converted from CA-less to CA-full
Deployment where one server is deployed as CA-less and acme is enabled, when converted
to CA full, should have ACME enabled by default.
ipatests: Test ACME with CA-less replica when converted to CA-full
Deployment have one ca-less replica and ACME is not enabled.
After converting ca-less replica to ca-full, ACME can be
enabled or disabled.
related:
https://pagure.io/freeipa/issue/8524
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
It's handy in general and good for testing to be able to
detect the current ACME status without having to revert
to using curl.
https://pagure.io/freeipa/issue/8524
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
The initial ACME support required that each server individually
enable/disable the service. PKI 10.10.0 stores this state in LDAP
so global enable/disable is available and the IPA code relies on
this.
Parse the VERSION file shipped with PKI to determine the version.
https://pagure.io/freeipa/issue/8524
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
This allows non-plugin components to import the RestClient
classes.
Removed code that only imported pki if in_server was True. This
was legacy code from when the plugins were also loaded in the
client.
Left the ra_plugin stanza for now. This is part of the old
abstraction that allowed for different CA plugins.
https://pagure.io/freeipa/issue/8524
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
This is to be able to import ACME schema provided by dogtag.
https://pagure.io/freeipa/issue/8524
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
This testcase modifies the update value set on RI Plugin
to -1 as a result checks that RIPluginCheck reports warning message
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This testcase checks that EncryptionCheck reports ERROR status when DS tls version is
modified to TLS1.0
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This testcase checks that the BackendsCheck reports
the CRITICAL status when dse.ldif present in the
DS instance directory is renamed/moved.
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
MIT Kerberos implements FAST negotiation as specified in RFC 6806
section 11. The implementation relies on the caller to provide a hint
whether FAST armoring must be used.
FAST armor can only be used when both client and KDC have a shared
secret. When KDC is from a trusted domain, there is no way to have a
shared secret between a generic Kerberos client and that KDC.
[MS-KILE] section 3.2.5.4 'Using FAST When the Realm Supports FAST'
allows KILE clients (Kerberos clients) to have local settings that
direct it to enforce use of FAST. This is equal to the current
implementation of 'kinit' utility in MIT Kerberos requiring to use FAST
if armor cache (option '-T') is provided.
[MS-KILE] section 3.3.5.7.4 defines a way for a computer from a
different realm to use compound identity TGS-REQ to create FAST TGS-REQ
explicitly armored with the computer's TGT. However, this method is not
available to IPA framework as we don't have access to the IPA server's
host key. In addition, 'kinit' utility does not support this method.
Active Directory has a policy to force use of FAST when client
advertizes its use. Since we cannot know in advance whether a principal
to obtain initial credentials for belongs to our realm or to a trusted
one due to enterprise principal canonicalization, we have to try to
kinit. Right now we fail unconditionally if FAST couldn't be used and
libkrb5 communication with a KDC from the user realm (e.g. from a
trusted forest) causes enforcement of a FAST.
In the latter case, as we cannot use FAST anyway, try to kinit again
without advertizing FAST. This works even in the situations when FAST
enforcement is enabled on Active Directory side: if client doesn't
advertize FAST capability, it is not required. Additionally, FAST cannot
be used for any practical need for a trusted domain's users yet.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When applying update files to 389 the listeners are disabled.
There is a large try/except around this so that if a failure
happens then the configuration should be automatically
restored.
We've seen multiple cases where this doesn't occur. Best guess
is that users are killing or ^C breaking out of the script.
What happens in that case is that when the next upgrade is run
the configuration is backed up again overwriting the original
values. This leaves dirsrv with no listener on 389.
Add a new state, upgrade-in-progress, so that the backup of the
config information can be skipped when the upgrader is executed
again after a failure.
The idea behind using a new state value is that if additional
attributes are ever backed up we don't need to remember to update
the list of possible saved values to check to decide if the
upgrade is in progress.
https://pagure.io/freeipa/issue/7534
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
[MS-ADTS] 6.1.6.9.3.2 requires msDS-TrustForestTrustInfo attribute of
trusted domain information in Active Directory to conform certain rules.
One side-effect of those rules is that list of UPN suffixes reported
through the netr_DsRGetForestTrustInformation function is dynamically
filtered to deduplicate subordinate suffixes.
It means that if list of UPN suffixes contains the following top level
names (TLNs):
fabrikam.com
sub.fabrikam.com
then netr_DsRGetForestTrustInformation would only return 'fabrikam.com'
as the TLN, fully filtering 'sub.fabrikam.com'.
IPA KDB driver used exact comparison of the UPN suffixes so any
subordinate had to be specified exactly.
Modify logic so that if exact check does not succeed, we validate a
realm to test being a subordinate of the known UPN suffixes. The
subordinate check is done by making sure UPN suffix is at the end of the
test realm and is immediately preceded with a dot.
Because the function to check suffixes potentially called for every
Kerberos principal, precalculate and cache length for each UPN suffix at
the time we retrieve the list of them.
Fixes: https://pagure.io/freeipa/issue/8554
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
ipa_sam was modifying the buffer returned by ipa_gethostfqdn().
Subsequent calls to ipa_gethostfqdn() returned the corrupt data,
causing other operations to fail.
Update ipa_sam to copy the string and modify the copy. Also
document this characteristic of ipa_gethostfqdn() and explain that
callers must not modify the returned data.
Part of: https://pagure.io/freeipa/issue/8501
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
ipa_gethostfqdn() now returns a pointer to a statically allocated buffer
or NULL in case of an error. The caller no longer has to supply a
correctly allocated buffer.
Rename IPA_HOST_HOST to_LEN IPA_HOST_FQDN_LEN and use IPA_HOST_FQDN_LEN
wherever code copies a hostname supplied from ipa_gethostfqdn().
Clarify that MAXHOSTNAMELEN and MAXHOSTFQDNLEN are different things.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
ipa_kdb and ipa-join now use ipa_gethostfqdn() instead of uname()'s nodename.
The code for hostname in ipa-join is simplified. Now the hostname is
auto-detected and verified in main(). All sub functions can now use the
hostname without additional checks. This removes a bunch of strdup(),
NULL checks, and free() calls.
Fixes: https://pagure.io/freeipa/issue/8501
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
FreeIPA's Python and C code used different approaches to get the FQDN of
the host. Some places assumed that gethostname() returns a FQDN. Other
code paths used glibc's resolver to resolve the current node name to a
FQDN.
Python code now uses the ipalib.constants.FQDN where a fully qualified
domain name is expected. The variable is initialized only once and avoids
potential DNS lookups.
C code uses a new helper function ipa_gethostfqdn() in util package. The
function implements similar logic as gethostfqdn() except it uses more
modern getaddrinfo(). The result is cached as well.
Fixes: https://pagure.io/freeipa/issue/8501
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Enable checking:
maxrepeat - reject passwrods which contain more than N consecutive
characters.
maxsequence - rejected passwords which contain character sequences
(abcde).
dictcheck - check passwords using cracklib
usercheck - check whether the password contains the user name.
The class checking provided by libpwpolicy is not used because this
overlaps with the existing IPA checking. This includes the options
dcredit, ucredit, lcredit, ocredit, minclass and maxclassrepeat.
The pwquality min length is fixed at 6 so if there is a conflict between
the system policy and pwquality log that length is enforced at 6.
https://pagure.io/freeipa/issue/6964https://pagure.io/freeipa/issue/5948https://pagure.io/freeipa/issue/2445https://pagure.io/freeipa/issue/298
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
certmonger was later restarted to remove the custom CA entries
and the startup delay sometimes caused uninstallation to fail.
certmonger is stopped in cainstance.py::uninstall() so it will
still be stopped post-install.
https://pagure.io/freeipa/issue/8533
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
cainstance and krainstance now reuse the main LDAP connection
api.Backend.ldap2 in all helper functions. Some functions used to create
and tear down their own LDAP connection. This was a remnant of the old
CA LDAP instance in FreeIPA 3.x.
Related: https://pagure.io/freeipa/issue/8521
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The ra_certprofile API is slow. It takes ~200ms to migrate and enable a
profile even when the profile already available. The migration step
slows down the installer and upgrader by about 12 to 15 seconds.
Skip all profiles that have been imported by Dogtag already.
Related: https://pagure.io/freeipa/issue/8522
Related: https://pagure.io/freeipa/issue/8521
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test test_installation.py::TestInstallMaster::test_selinux_avcs
is failing when no AVCs are detected because it is calling
journalctl --full --grep=AVC--since=yesterday
and the command exits with return code 1.
Call the command with raiseonerr=False to support this case.
Fixes: https://pagure.io/freeipa/issue/8541
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Run freeipa-healthcheck on a FreeIPA clusters with a
hidden replica to make sure a hidden replica is considered
fully healthy.
Fixes: https://pagure.io/freeipa/issue/8536
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Kaleemullah Siddiqui <ksiddiqu@redhat.com>
Whn openssh-server > 8.2 is installed, ipa rpmspec moves its
configuration directives to /etc/ssh/sshd_config.d/04-ipa.conf
but doesn't check that the 04-ipa.conf is included from
/etc/ssh/sshd_config.
The fixes ensures that the snippet is always included, either
through the line Include /etc/ssh/sshd_config.d/*.conf or
directly with Include /etc/ssh/sshd_config.d/04-ipa.conf
Fixes: https://pagure.io/freeipa/issue/8535
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The following tests can be used to detect regressions with 389-ds:
- test_integration/test_replica_promotion.py::TestHiddenReplicaPromotion
- test_integration/test_dns_locations.py
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
DNS data management now uses NSS's getaddrinfo() instead of direct DNS
queries to resolve the ipa-ca record. This fixes missing ipa-ca records
when the current hostname is not resolvable in DNS but has correct
records in /etc/hosts.
Reduce timeout to 15 seconds and tighten timeout loop.
The changeset can speed up installation by almost 60 seconds.
ipa-server-install without built-in DNS calls into DNS data management
twice with a timeout of 30 seconds for each call.
Fixes: https://pagure.io/freeipa/issue/8529
Related: https://pagure.io/freeipa/issue/8521
Related: https://pagure.io/freeipa/issue/8501
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Use get_kdcinfo before and after kinit if krb5_trace in kinit_as_user.
This will help determine how SSSD was selecting which KRB5KDC to use.
Fixes: https://pagure.io/freeipa/issue/8510
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Use get_kdcinfo before and after kinit if krb5_trace in create_active_user.
This will help determine how SSSD was selecting which KRB5KDC to use.
Fixes: https://pagure.io/freeipa/issue/8510
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
