ipa-certupdate obtains host credentials to operate. If this
fails with a ccache error this can be confusing if the user
executing it already has admin credentails.
Include the principal being retrieved and the keytab being
used.
This basically intercepts the exception to log additional
information and lets the exception be handled at a higher
level.
https://pagure.io/freeipa/issue/8257
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Only the first key was being displayed for any orphaned map.
https://pagure.io/freeipa/issue/7814
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
If dynamic DNS updates are selected, sssd will use GSS-TSIG
by default for nsupdate.
When ipa-client-install notices that plain nsupdate is required,
switch sssd to use no authentication for dynamic updates too.
Fixes: https://pagure.io/freeipa/issue/8402
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-client-install invokes nsupdate with GSS-TSIG at client
enrollment time. If that fails, no retry is done.
Change that behavior to try again without GSS-TSIG.
Fixes: https://pagure.io/freeipa/issue/8402
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
No need to flush buffers on the nsupdate file as it will get
removed at the end of the function.
Related: https://pagure.io/freeipa/issue/8402
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The command usage and man-page options may not match.
In ipa-client-automount, fix to match usage and man-page.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The ipa-client-samba man-page describes the -d option, but the -d option cannot actually be used.
Fix ipa-client-samba to enable the -d option.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-client-install is checking if the sudo command is available
by calling 'sudo -V'. The call is currently using subprocess.popen
which redirects the output to the default stdout.
Use ipautil.run instead of subprocess.popen as this does not
capture stdout (the command output is just logged in the debug file).
Fixes: https://pagure.io/freeipa/issue/8767
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
pylint 2.7.0 now emits inconsistent-return-statements if one of
try/except statement is not returning explicitly while the other do.
Fixes: https://pagure.io/freeipa/issue/8720
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This file was missed in the first pass to remove support for
csrgen.
This was never feature complete and currently has issues and
we lack the resources to maintain it.
Drop it for now. It can be revived from git history in the
future if we see the need.
https://pagure.io/freeipa/issue/8669
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Fixes: https://pagure.io/freeipa/issue/8530
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Refactoring ipa-rmkeytab with commit
f3f9672d52 led to new error code 7 when
MIT Kerberos fails to iterate through the keys. It appears now in places
where in past error code 3 was returned.
Related: https://pagure.io/freeipa/issue/8658
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This was never feature complete and currently has issues and
we lack the resources to maintain it.
Drop it for now. It can be revived from git history in the
future if we see the need.
https://pagure.io/freeipa/issue/8669
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
In order to simplify the build process between upstream FreeIPA
and downstream builds (such as CentOS Stream) we are changing
some file references from FreeIPA to IPA (and Identity Management).
https://pagure.io/freeipa/issue/8669
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The CA tracking request is modified (it calls renew but it doesn't
actually do a renewal) as part of ipa-certupdate and it dropped
the profile. ipa-healthcheck discovered this condition.
https://pagure.io/freeipa/issue/8644
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Previously, dns_lookup_kdc was only set to True if DNS
discovery worked or if the KDC was not specified on the
command-line.
Setting dns_lookup_kdc to False would result in a hardcoded
configuration which is less reliable in the long run.
For instance, adding a trust to an Active Directory forest
after clients are enrolled would result in clients not being
able to authenticate AD users. Recycling FreeIPA servers
could prove problematic if the original hostnames are not
reused too.
Change summary:
Always set dns_lookup_kdc to True on client enrollment.
With this change, DNS SRV search will always be performed
before looking into /etc/krb5.conf realm entries.
Fixes: https://pagure.io/freeipa/issue/6523
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The ProxyCommand is non-executable if the user does not have
a valid shell (like /sbin/nologin) so skip it in that case.
https://pagure.io/freeipa/issue/7676
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This command doesn't require any permissions that a host doesn't
already have and it simplifies overall credential handling.
It also corrects the case where the server API cache is out of
date and there are no credentials available to refresh it which
can lead to a confusing error message.
Also switch to MEMORY-based ccache rather than file to avoid
having to clean up the filesystem.
https://pagure.io/freeipa/issue/8531
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
SMTP server may ask or require client's certificate for verification.
To support this the underlying Python's functionality is used [0].
Added 3 new options(corresponds to `load_cert_chain`):
- smtp_client_cert - the path to a single file in PEM format containing the
certificate.
- smtp_client_key - the path to a file containing the private key in.
- smtp_client_key_pass - the password for decrypting the private key.
[0]: https://docs.python.org/3/library/ssl.html#ssl.SSLContext.load_cert_chain
Fixes: https://pagure.io/freeipa/issue/8580
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
https://pagure.io/freeipa/issue/8579
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
If an administrator requests `smtp_security=starttls`, but SMTP
server disables STARTTLS, then EPN downgrade security to `none`,
which means plain text. Administrator doesn't expect such behavior.
Fixes: https://pagure.io/freeipa/issue/8578
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
FreeIPA's Python and C code used different approaches to get the FQDN of
the host. Some places assumed that gethostname() returns a FQDN. Other
code paths used glibc's resolver to resolve the current node name to a
FQDN.
Python code now uses the ipalib.constants.FQDN where a fully qualified
domain name is expected. The variable is initialized only once and avoids
potential DNS lookups.
C code uses a new helper function ipa_gethostfqdn() in util package. The
function implements similar logic as gethostfqdn() except it uses more
modern getaddrinfo(). The result is cached as well.
Fixes: https://pagure.io/freeipa/issue/8501
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
It's unlikely that a third chrony synchronization attempt is going to
succeed after the the first two attempts have failed. Perform more
retries with smaller timeout.
This speed up installer by 11 seconds on systems without fully
configured chronyd or no chronyd (e.g. containers).
Related: https://pagure.io/freeipa/issue/8521
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
`dnspython` 2.0.0 has many changes and several deprecations like:
```
> dns.resolver.resolve() has been added, allowing control of whether
search lists are used. dns.resolver.query() is retained for backwards
compatibility, but deprecated. The default for search list behavior can
be set at in the resolver object with the use_search_by_default
parameter. The default is False.
> dns.resolver.resolve_address() has been added, allowing easy
address-to-name lookups.
```
The new class `DNSResolver`:
- provides the compatibility layer
- defaults the previous behavior (the search list configured in the
system's resolver configuration is used for relative names)
- defaults lifetime to 15sec (determines the number of seconds
to spend trying to get an answer to the question)
Fixes: https://pagure.io/freeipa/issue/8383
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
New warnings were found by new pylint (2.5.3).
Fixes: https://pagure.io/freeipa/issue/8468
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Enhance input validation:
* make sure --from-nbdays and --to-nbdays are integer
* make sure --from-nbdays < --to-nbdays
Fixes: https://pagure.io/freeipa/issue/8444
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Enhance error message when SMTP is down.
Fixes: https://pagure.io/freeipa/issue/8445
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
freeipa-container images come with authselect pre-configured. There is
no need to configure, migrate, or restore authselect. The --mkhomedir
option is not supported, too.
Related: https://pagure.io/freeipa/issue/8401
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Use the is_ipa_configure() and is_ipa_client_configured() utilities
instead which are much more robust.
https://pagure.io/freeipa/issue/8384
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
This is common to both client and server. Start with whether the
client or server is configured.
https://pagure.io/freeipa/issue/8384
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
When asking the quesiton "is my IPA client configured?" right now
we look at whether the installation backed up any files and
/etc/ipa/default.conf exists.
Instead set a new state, installation, to True as soon as the
client installation finishes.
Unlike the server there is no upgrade process for clients so this
isn't going to be all that useful for quite some time unless that
changes because upgrading an existing install won't set this
to True.
https://pagure.io/freeipa/issue/8384
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
ipa-join defaults to /etc/krb5.keytab. Use ``-k paths.KRB5_KEYTAB`` to
write the keytab to /data share in containers.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
When a deployment gets promoted from CA-less to CA-ful other
replicas still have enable_ra=False in default.conf, and do not have
the ra-agent key and certificate. Enhance ipa-certupdate to detect
when the deployment has become CA-ful; retrieve the ra-agent
credential and update default.conf.
The rationale for adding this behaviour to ipa-certupdate is that it
is already necessary to use this command to update local trust
stores with the new CA certificate(s). So by using ipa-certupdate
we avoid introducing additional steps for administrators.
It is necessary to choose a CA master to use as the ca_host. We use
the first server returned by LDAP. A better heuristic might be to
choose a master in the same location but this is just left as a
comment unless or until the need is proven.
Finally, defer the httpd service restart until after the possible
update of default.conf so that the IPA API executes with the new
configuration.
This change also addresses the case of a CA server being removed
from the topology, i.e. ipa-certupdate detects when non-CA replicas
are pointing at the removed server, and chooses a new ca_host.
HOW TO TEST:
1. Install a CA-less server (first server).
2. Install a CA-less replica.
3. Run 'ipa-ca-install' on first server, promoting deployment from
CA-less to CA-ful.
4. Run 'ipa-certupdate' on second server.
5. Exceute 'ipa cert-show 5' on second server. Should succeed,
because ra-agent credential was retrieved and default.conf
updated at step #4.
Fixes: https://pagure.io/freeipa/issue/7188
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ipa-certupdate throws an exception when executed on a non-CA server
in a CA-ful deployment with lightweight sub-CAs (LWCAs). Check that
we are on a CA server before attempting to create Certmonger
tracking requests for LWCAs.
HOW TO TEST
1. Install first server (with CA)
2. Install replica without CA
3. Create sub-CA (`ipa ca-add`)
4. Run `ipa-certupdate` on replica. Observe that no stack trace is
produced.
Fixes: https://pagure.io/freeipa/issue/8399
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
sshd 8.2+ now supports the "Include" keyword in sshd_config and
ships by default /etc/ssh/sshd_config with
"Include /etc/ssh/sshd_config.d/*"
As fedora 32 provides a config file in that directory (05-redhat.conf) with
ChallengeResponseAuthentication no
that is conflicting with IPA client config, ipa-client-install now needs
to make its config changes in a drop-in file read before 05-redhat.conf
(the files are read in lexicographic order and the first setting wins).
There is no need to handle upgrades from sshd < 8.2: if openssh-server
detects a customisation in /etc/ssh/sshd_config, it will not update
the file but create /etc/ssh/sshd_config.rpmnew and ask the admin
to manually handle the config upgrade.
Fixes: https://pagure.io/freeipa/issue/8304
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This was returning givenname as a list and not as a single
string which messed up the templating.
https://pagure.io/freeipa/issue/3687
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Provide a knob so the mail queue doesn't get completely flooded
with new e-mails.
Default to no wait, value in milliseconds.
https://pagure.io/freeipa/issue/3687
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
To make testing easier for administrators the --mail-test option
can be used to send live e-mail from ipa-epn. It sends mail
to the smtp_admin user processing the template with dummy data.
https://pagure.io/freeipa/issue/3687
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Tested security mode with none, starttls and ssl security.
Fixes: https://pagure.io/freeipa/issue/3687
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Add options for character set (default utf8) and message
subtype (default plain). This will allow for more control
for users to do either HTML mail or use ascii for the character
set so the attachment is not base64-encoded to make it easier
for all mail clients.
Collect first and last name as well for each user in order to
provide more options for the template engine.
Make the From address configurable, defaulting to noreply@ipa_domain
Make Subject configurable too.
Don't rely on the MTA to set Message-Id: set it using the email
module.
Fixes: https://pagure.io/freeipa/issue/3687
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
EPN stands for Expiring Password Notification. It is a standalone
tool designed to build a list of users whose password would expire
in the near future, and either display the list in a machine-readable
format, or send email notifications to these users.
EPN provides command-line options to display the list of affected users.
This provides data introspection and helps understand how many emails
would be sent for a given day, or a given date range.
The command-line options can also be used by a monitoring system to alert
whenever a number of emails over the SMTP quota would be sent.
EPN is meant to be launched once a day from an IPA client (preferred)
or replica from a systemd timer.
EPN does not keep state. The list of affected users is built at runtime
but never kept.
TLS/STARTTLS SMTP code is untested and unlikely to work as-is.
Parts of code contributed by Rob Crittenden.
Ideas and feedback contributed by Christian Heimes and Michal Polovka.
Fixes: https://pagure.io/freeipa/issue/3687
Signed-off-by: François Cami <fcami@redhat.com>
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Call sssdconfig.save_domain(domain) after each configuration
change during ipa-client-automount --uninstall.
Previously, sssdconfig.save_domain(domain) was called only
outside of the domain detection loop which changed the domain
configuration. This introduced issues as this method's behavior
is only consistent when configuration items are removed in a
certain order: https://pagure.io/SSSD/sssd/issue/4149
Plus, it is more correct to save the configuration from within
the loop if ever we support multiple domains.
Fixes: https://pagure.io/freeipa/issue/8190
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This will allow for CA certificates to be dropped from the list
of certificates. It also allows for the trust flags to be
updated when an existing cert is dropped and re-added.
https://pagure.io/freeipa/issue/8124
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Trusted domain object in LDAP uses ipaNTTrustedDomainSID attribute to
store SID of the trusted domain while IPA domain itself uses
ipaNTSecurityIdentifier. When mapping the values for printing out a
summary table, use the right mapping according to the object.
Fixes: https://pagure.io/freeipa/issue/8149
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The plugin had two bugs:
For one it did not work under Python 3 because urlencode() returns a string
but HTTPSHandler expects bytes as data argument.
The primary key field name is not available in client plugins. Just pass
the token name and let server code convert the name to DN.
Fixes: https://pagure.io/freeipa/issue/7804
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Commands like ipa group-add-member-manager now show permission
errors on failed operations.
Fixes: https://pagure.io/freeipa/issue/8122
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
