New Pylint (2.4.3) catches several new 'true problems'. At the same
time, it warns about things that are massively and reasonably
employed in FreeIPA.
list of fixed:
- no-else-continue
- redeclared-assigned-name
- no-else-break
- unnecessary-comprehension
- using-constant-test (false positive)
list of ignored (responsibility of contributors and reviewers):
- import-outside-toplevel
Fixes: https://pagure.io/freeipa/issue/8102
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Commit e3f3584 introduced an additional prompt in ipa-server-install
"Do you want to configure chrony with NTP server or pool address?".
The test is building a string passed to stdin in interactive mode
but this string has not been updated with the additional answer for
this new question.
This commit answers 'no' to the question and allows to proceed with
the ipa server installation.
Fixes: https://pagure.io/freeipa/issue/7969
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
The test test_http_intermediate_ca was expecting success when
it should expect a failure. Scenario:
- install IPA ca-less with certs signed by rootCA
- call ipa-server-certinstall with a cert signed by a subCA
to replace http cert.
In this case, the command should refust changing the cert
(otherwise the clients won't be able any more to use
ipa * commands as the subca is not installed in /etc/ipa/nssdb
or in /etc/ipa/ca.crt).
The commit fixes the test expectation and marks the test as
xfail (see ticket 7759).
The test test_ds_intermediate_ca was expecting success when
it should expect a failure. Same scenario as above, but for
the ldap server cert.
The commit fixes the test expectation and removes the xfail
(ticket 6959 was closed as invalid).
Note:
The behavior differs for ldap and http cert because LDAP server
is using a NSSDB and http server is using openssl, hence
ipa-server-certinstall follows 2 different code paths when
changing the server cert.
Related to https://pagure.io/freeipa/issue/7759
Related to https://pagure.io/freeipa/issue/6959
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test TestServerInstall::test_ca_2_certs has a
wrong expectation. Scenario:
install a CA-less master with
ipa-server-install --ca-cert-file root.pem
where root.pem contains the CA that signed the http and ldap
certificates + an additional (unneeded) CA cert.
The test was expecting a failure, but this scenario is not
problematic as long as the unneeded CA cert is not added.
Related to https://pagure.io/freeipa/issue/6289 which has been
closed as won't fix
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
The test is putting server.p12 / replica.p12 in the test_dir directory,
and the error message is printing the file name with its full path.
Related to https://pagure.io/freeipa/issue/5378
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
pytest 3.7.0 doesn't like ipatests.pytest_plugins package. The string
"pytest_plugins" is used as marker to load plugins. By populare vote and
to avoid future conflicts, we decided to rename the directory to pytest_ipa.
Fixes: https://pagure.io/freeipa/issue/7663
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Allow callers to pass abitrary extra arguments to the installer.
This is useful when using a CALess installation in order to
speed up tests that require a full install but do not require
a full PKI.
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test helper create_external_ca is useful to create an external root
CA and sign ipa.csr for external CA testing. I also moved the file into
ipatests top package to make the import shorter and to avoid an import
warning.
Usage:
ipa-server-install --external-ca ...
python3 -m ipatests.create_external_ca
ipa-server-install --external-cert-file=/tmp/rootca.pem \
--external-cert-file=/tmp/ipaca.pem
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
This is related to change in certutil which does a cwd
to the location of the NSS database. certutil is used as part
of loading a PKCS#12 file to do validation.
https://pagure.io/freeipa/issue/7489
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexey Slaykovsky <alexey@slaykovsky.com>
Add absolute_import from __future__ so that pylint
does not fail and to achieve python3 behavior in
python2.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
test_ipap11helper no longer changes directory for the entire test suite.
The fix revealed a bug in another test suite. test_secrets now uses a
proper temporary directory.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
After commit bbe615e12c278f9cddaeb38e80b970bf14d9b32d, if the uninstall
process fails (in the test cleanup) the error is not hidden anymore.
That brought light to errors in the cleanup process on
TestReplicaInstall test, like this:
```
RUN ['ipa-server-install', '--uninstall', '-U']
ipapython.admintool: ERROR Server removal aborted:
Replication topology in suffix 'domain' is disconnected:
Topology does not allow server master.ipa.test to replicate with servers:
replica0.ipa.test.
ipapython.admintool: ERROR The ipa-server-install command failed
```
This commit changes the order of how a replica should be removed from
the topology.
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
While testing on RHEL we are getting IOError instead of OSError.
Add also IOError to except clause.
This is mostly for compatibility reasons however should not cause
any issue as IOError is alias for OSError on Python3.
https://pagure.io/freeipa/issue/7439
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
After commits 8960141 and 97942a7 we do not need to run
ipa-certupdate command anymore when switching to ca-full.
This patch removes the above mentioned commands in order to
properly test the scenario.
https://pagure.io/freeipa/issue/7309
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Several run() calls used hard-coded paths rather than pre-defined paths
from ipaplatform.paths. The patch fixes all places that I was able to
find with a simple search.
The fix simplifies Darix's port of freeIPA on openSuSE.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Before this change, if the uninstall process fails, the test would not fail, due
to the raiseonerr=False.
It's necessary to remove the uninstall call in CALessBase because in
TestIntegration there is another uninstall call. So, without the
raiseonerr=False, it would make the uninstall process fail, since the master is
already uninstalled.
https://pagure.io/freeipa/issue/7357
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Till now both create_caless_pki.py and create_external_ca.py were
stored in test_integration folder. However when trying to import
e.g. "from create_external_ca import ExternalCA" from tasks.py
where all other integration test`s support functions lives we get
"AttributeError: module 'pytest' has no attribute 'config' as pytest
was not completely initialized at the moment of the import.
https://pagure.io/freeipa/issue/7302
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
* Replace raise nose.SkipTest with raise unittest.SkipTest
* Replace nose.tools.assert_equal(a, b) with assert a == b
* Replace nose.tools.raises with pytest.raises
* Convert @raises decorator to pytest.raises() but just for relevant
lines.
* Remove nose dependency
I left the nose_compat pytest plugin in place. It can be removed in
another request in case it is no longer used.
https://pagure.io/freeipa/issue/7301
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
In "test_invalid_ds_cn" test case an old invalid http.p12 cert
is used as a leftover after previous "test_invalid_http_cn" test.
Get new valid http.p12 cert using create_pkcs12().
Also use server-badname cert instead of cert for replica.
This explicitly ensures a non-matching hostname/SAN rather than
implicitly by using a certificate for the replica.
https://pagure.io/freeipa/issue/7254
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fixes an error where we were getting domain_level None and after
switching to Py3 we hit TypeError because of comparing None and int.
https://pagure.io/freeipa/issue/7254
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This fix adds additional prompt which was missing previously
in test_interactive_missing_ds_pkcs_password and
test_interactive_missing_http_pkcs_password under CA-less integration
testsuite.
Fixes: https://pagure.io/freeipa/issue/7182
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Reviewed-By: Michal Reznik <mreznik@redhat.com>
Bytes would cause the logger to throw up while interpolating the
string.
Reviewed-By: Michal Reznik <mreznik@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
CA-less tests debug logging uses representation of a variable
containing the certificate object, which does not help very much.
Use the actual DER representation of the certificate on such places.
Reviewed-By: Michal Reznik <mreznik@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When running test_caless suite in py3 we need to open CA cert in
binary mode so we can provide bytes later for python-cryptography.
https://pagure.io/freeipa/issue/7131
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
We don't need the strip_header() function, to load an unknown
x509 certificate, load_unknown_x509_certificate() should be used.
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Change makepki.sh for new makepki.py which should be more
readable, maintainable and extendable than the old script.
In this test we use it as a module and import create_pki().
The new makepki adds SKI and AKI extensions for correct
cert validation.
Other minor changes needed as we do not use NSS to store our
certificates on the test controller.
https://pagure.io/freeipa/issue/7030
Signed-off-by: Michal Reznik <mreznik@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Remove all object-specific loggers, with the exception of `Plugin.log`,
which is now deprecated. Replace affected logger calls with module-level
logger calls.
Deprecate object-specific loggers in `ipa_log_manager.get_logger`.
Reviewed-By: Martin Basti <mbasti@redhat.com>
Previous attempt to improve error messages during certificate
validation would only work in English locale so we're keeping
the whole NSS messages for all cases.
https://pagure.io/freeipa/issue/6945
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
When the certificate validation was replaced, some error messages
were omitted (like "Peer's certificate expired."). Bring these back.
https://pagure.io/freeipa/issue/6945
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
