TLS 1.3 is causing some trouble with client cert authentication.
Conditional client cert authentication requires post-handshake
authentication extension on TLS 1.3. The new feature is not fully
implemented yet.
TLS 1.0 and 1.1 are no longer state of the art and now disabled by
default.
TLS 1.2 works everywhere and supports PFS.
Related: https://pagure.io/freeipa/issue/7667
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Drop the SSLProtocol directive for Fedora and RHEL systems. mod_ssl
will use crypto policies for the set of protocols.
For Debian systems configure a similar set of protocols for what
was previously configured, but do it in a different way. Rather than
iterating the allowed protocols just include the ones not allowed.
Fixes: https://pagure.io/freeipa/issue/7667
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The p11-kit configuration injects p11-kit-proxy into all NSS databases.
Amongst other p11-kit loads SoftHSM2 PKCS#11 provider. This interferes
with 389-DS, certmonger, Dogtag and other services. For example certmonger
tries to open OpenDNSSEC's SoftHSM2 token, although it doesn't use it at
all. It also breaks Dogtag HSM support testing with SoftHSM2.
IPA server does neither need nor use SoftHSM2 proxied by p11-kit.
Related: https://pagure.io/freeipa/issue/7810
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Dogtag PKI typically takes around 10 seconds to start and respond to
requests. Dogtag uses a simple systemd service, which means systemd is
unable to detect when Dogtag is ready. Commands like ``systemctl start``
and ``systemctl restart`` don't block and wait until the CA is up. There
have been various workarounds in Dogtag and IPA.
Systemd has an ExecStartPost hook to run programs after the main service
is started. The post hook blocks systemctl start and restart until all
post hooks report ready, too. The new ipa-pki-wait-running script polls
on port 8080 and waits until the CA subsystem returns ``running``.
Related: https://pagure.io/freeipa/issue/7916
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
IPA used to write a custom /etc/resolv.conf. On Fedora and RHEL,
NetworkManager is typically maintaining resolv.conf. On reboot or
restart of the service, NM overwrites the custom settings.
On systems with NM enabled, the DNS server installer now drops a config
file into NM's global config directory and delegates resolv.conf to NM.
On systems without NM, fall back to create /etc/resolv.conf directly.
Fixes: https://pagure.io/freeipa/issue/7900
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
systemd daemon must be reloaded after a config file is added, changed,
or removed. Provide a common API endpoint in ipaplatform.tasks.
Related: https://pagure.io/freeipa/issue/7860
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Kernel keyrings are not namespaced yet. Keyrings can leak into other
containers. Therefore keyrings should not be used in containerized
environment.
Don't configure Kerberos to use KEYRING ccache backen when a container
environment is detected by systemd-detect-virt --container.
Fixes: https://pagure.io/freeipa/issue/7807
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
NFS unit names were renamed.
Compatibility was maintained with older unit names
through symlinks. When these symlinks are removed
only new unit names work, so changing to using non-
symlink unit names is required.
Fixes: https://pagure.io/freeipa/issue/7783
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Since authselect 1.0.2, invoking an authselect command sequence
like this:
['authselect', 'sssd', '', '--force']
does not work: authselect barfs on the empty string arg and
errors out. We must only pass a features arg if we actually have
some text to go in it.
This broke uninstallation.
In all cases, features are now passed as separate arguments instead of one
argument separated by space.
Fixes: https://pagure.io/freeipa/issue/7776
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pylint 2.2.0 has a new checker for unnecessary pass statements. There is
no need to have a pass statement in functions or classes with a doc
string.
Fixes: https://pagure.io/freeipa/issue/7772
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Some incorrect errors are possible if a client installation
fails and a configuration rollback is required.
These include:
1. Unconfigured automount client failed: CalledProcessError(Command
['/usr/sbin/ipa-client-automount', '--uninstall', '--debug']
returned non-zero exit status 1: '')
Caused by check_client_configuration() not returning the correct
return value (2).
2. WARNING: Unable to revert to the pre-installation state ('authconfig'
tool has been deprecated in favor of 'authselect'). The default sssd
profile will be used instead.
The authconfig arguments would have been: authconfig --disableldap
--disablekrb5 --disablesssdauth --disablemkhomedir
If installation fails before SSSD is configured there is no state
to roll back to. Detect this condition.
3. An error occurred while removing SSSD's cache.Please remove the
cache manually by executing sssctl cache-remove -o.
Again, if SSSD is not configured yet then there is no cache to
remove. Also correct the missing space after the period.
https://pagure.io/freeipa/issue/7729
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Replace six.moves and six.StringIO/BytesIO imports with cannonical
Python 3 packages.
Note: six.moves.input behaves differently than builtin input function.
Therefore I left six.moves.input for now.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Python 2 had old style and new style classes. Python 3 has only new
style classes. There is no point to subclass from object any more.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When ipa client is uninstalled, the content of sysrestore.state
is read to restore the previous authselect profile and features.
The code should properly handle the case where sysrestore.state
contains the header for the authselect section, but the key=value
for profile and features are missing.
Fixes https://pagure.io/freeipa/issue/7657
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When ipa client was installed with the --hostname= option, it stores
[network]
hostname = (current hostname)
in /var/lib/ipa-client/sysrestore/sysrestore.state and changes the hostname
from (current hostname) to the value provided in --hostname.
During uninstall, the previous hostname is restored but the entry does
not get removed from sysrestore.state. As the uninstaller checks if all
entries from sysrestore.state have been restored, it warns that some
state has not been restored.
The fix calls statestore.restore_state() instead of statestore.get_state()
as this method also clears the entry.
https://pagure.io/freeipa/issue/7620
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Ensure that ipa.p11-kit is always world-readable.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
authselect needs to be configured with the 'with-sudo' feature (except
when ipa-client-install is called with the option --no-sudo).
https://pagure.io/freeipa/issue/7562
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In Fedora 29, the fedora-domainname.service has been renamed to
nis-domainname.service like on RHEL. The ipaplatform service module for
Fedora now only renames the service, when it detects the presence of
fedora-domainname.service.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1588192
Fixes: https://pagure.io/freeipa/issue/7582
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The site and module configs are split on Debian, server setup needs
to match that.
Fixes: https://pagure.io/freeipa/issue/7554
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The code currently parses the output of "authselect current" in order
to extract the current profile and options. Example:
$ authselect current
Profile ID: sssd
Enabled features:
- with-mkhomedir
It is easier to use the output of "authselect current --raw". Example:
$ authselect current --raw
sssd with-mkhomedir
Related to
https://pagure.io/freeipa/issue/7377
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The authconfig tool is deprecated and replaced by authselect. Migrate
FreeIPA in order to use the new tool as described in the design page
https://www.freeipa.org/page/V4/Authselect_migration
Fixes:
https://pagure.io/freeipa/issue/7377
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add absolute_import from __future__ so that pylint
does not fail and to achieve python3 behavior in
python2.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ctypes.util.find_library() is costly and slows down startup of ipa CLI.
ipaplatform.redhat.tasks now defers loading of librpm until its needed.
CFFI has been replaced with ctypes, too.
See: https://pagure.io/freeipa/issue/6851
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instead of a package conflict, freeIPA now uses an Apache config file to
enforce the correct wsgi module. The workaround only applies to Fedora
since it is the only platform that permits parallel installation of
Python 2 and Python 3 mod_wsgi modules. RHEL 7 has only Python 2 and
Debian doesn't permit installation of both variants.
See: https://pagure.io/freeipa/issue/7161
Fixes: https://pagure.io/freeipa/issue/7394
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Latest Travis CI image lacks IPv6 address on localhost. Add some
diagnostics and skip IPv6 tests in ipa-server-install when TRAVIS is
detected.
The hack will be removed as soon as it is no longer required to pass
automated testing.
https://pagure.io/freeipa/issue/7323
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Felipe Volpone <fbarreto@redhat.com>
This causes Firefox to report our CA certificate as not-trustworthy.
We were previously doing this correctly, however it slipped as an
error due to certificate refactoring.
https://pagure.io/freeipa/issue/7210
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Previously IPA would set the LimitNOFILE value to 8192 to increase
the number of concurrent clients. 389-ds-base does this by default
as of 1.3.7.0.
Remove the IPA-specific tuning and rely on the out-of-the-box
389-ds-base tuning.
Bump the required version of 389-ds-base to 1.3.7.0.
Any other tuning added by 389-ds-base will result in a
dirsrv.systemd.rpmsave file which admins will need to merge
in manually, like typical .rpmsave config changes.
https://pagure.io/freeipa/issue/6994
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
In cases when IPA is installed in two steps (external CA), it's
necessary to check (in the second step) if Dir. Server is
running before continue with the installation. If it's not,
start Directory Server.
https://pagure.io/freeipa/issue/6611
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
- Add check for IPv6 stack to upgrade process
- Change IPv6 checker to also check that localhost resolves to ::1
Part of fixes https://pagure.io/freeipa/issue/7083
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
b5732efd introduced a regression because it tries to write EKU
that's actually in the CA cert instead of using the LDAP information.
However, when no EKU is available,
IPACertificate.extended_key_usage_bytes still returned at least
EKU_PLACEHOLDER OID to keep the behavior the same as in previous
versions. This caused the EKU_PLACEHOLDER to be written in the
ipa.p11-kit file which made Firefox report FreeIPA Web UI as
improperly configured.
https://pagure.io/freeipa/issue/7119
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
After commit cac3475, ipa-backup is broken due to circular
dependencies. This fixes it, removing circular dependency
of ipalib. The ipalib.constants.IPAAPI_USER is now passed
as parameter to the function that use it.
https://pagure.io/freeipa/issue/7108
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Since ipaapi user is now created during RPM install and not in runtime,
we may switch back to shipping tmpfiles.d configuration directly in RPMs
and not create it in runtime, which is a preferred way to handle drop-in
configuration anyway.
This also means that the drop-in config will be shipped in /usr/lib
instead of /etc according to Fedora packaging guidelines.
This partially reverts commit 38c66896de.
https://pagure.io/freeipa/issue/7053
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
This commit enables ipa-client-install to be installable in
Python 3 and makes it run in Python 3 by default.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Felipe Volpone <fbarreto@redhat.com>
Replace all `ipa_log_manager.log_mgr.get_logger` calls to create
module-level loggers with `logging.getLogger` calls and deprecate
`ipa_log_manager.log_mgr.get_logger`.
Reviewed-By: Martin Basti <mbasti@redhat.com>
Previously system users needed by FreeIPA server services was created during
ipa-server-install. This led to problem when DBus policy was configured during
package installation but the user specified in the policy didn't exist yet
(and potentionally similar ones). Now the users will be created in package %pre
section so all users freeipa-server package needs exist before any installation
or configuration begins.
Another possibility would be using systemd-sysusers(8) for this purpose but
given that systemd is not available during container build the traditional
approach is superior.
Also dirsrv and pkiuser users are no longer created by FreeIPA instead it
depends on 389ds and dogtag to create those users.
https://pagure.io/freeipa/issue/6743
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Run `systemctl daemon-reload` after
`/etc/systemd/system/httpd.service.d/ipa.conf` is created or deleted,
otherwise systemd will not merge the file into httpd.service and therefore
required environment variables will not be set for httpd.
This fixes authentication failures ("No valid Negotiate header in server
response") due to missing `GSS_USE_PROXY=yes` in httpd environment.
https://pagure.io/freeipa/issue/6773
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Add new pylint AST checker plugin which implements a check for imports
forbidden in IPA. Which imports are forbidden is configurable in pylintrc.
Provide default forbidden import configuration and disable the check for
existing forbidden imports in our code base.
Reviewed-By: Martin Basti <mbasti@redhat.com>
Add checks to install and replica install to verify IPv6 stack
is enabled. IPv6 is required by some IPA parts (AD, conncheck, ...).
https://pagure.io/freeipa/issue/6608
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This kdestroy runs as root and wipes root's own ccachs ...
this is totally inappropriate.
Use a file ccache that ends up in the private tmp, so that if the
service is restarted the file is automatically removed.
https://fedorahosted.org/freeipa/ticket/6673
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add the apache user the ipawebui group.
Make the ccaches directory owned by the ipawebui group and make
mod_auth_gssapi write the ccache files as r/w by the apache user and
the ipawebui group.
Fix tmpfiles creation ownership and permissions to allow the user to
access ccaches files.
The webui framework now works as a separate user than apache, so the certs
used to access the dogtag instance need to be usable by this new user as well.
Both apache and the webui user are in the ipawebui group, so use that.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
We do not want to generate runtime directories just because the packages
are installed, but only if the server is actually setup and run. Also this
will be needed later because we will create a user at install time and some
tmpfiles will need to be owned by this user.
As we are changing this code also rationalize the directory structure and
move it from the http rundir to the ipa specific rundir.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Use the new API for bind 9.11. Removed deprecated "serial_autoincrement"
and updated the rest of configuration to conform to the new format.
This only fixes new IPA installations. For existing installations,
named.conf will be transformed when the new version of bind-dyndb-ldap
is installed.
https://fedorahosted.org/freeipa/ticket/6565
Reviewed-By: Martin Basti <mbasti@redhat.com>
NIS configuration error should be hidden from user
while running ipa-client-install
Fixes https://fedorahosted.org/freeipa/ticket/5244
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
