Enabling ephemeral KRA requests will reduce the amount of LDAP
write operations and improve overall performance.
Re-order some imports and shorten some lines to make pep8 happy.
Fixes: https://pagure.io/freeipa/issue/6703
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
During a distro upgrade, e.g. F-26 to F-27, networking may not
be available which will cause the upgrade to fail. Despite this
the IPA service can be subsequently restarted running new code
with old data.
This patch relies on the existing version-check cdoe to determine
when/if an upgrade is required and will do so during an ipactl
start or restart.
The upgrade is now run implicitly in the spec file and will
cause the server to be stopped after the package is installed
if the upgrade fails.
Fixes: https://pagure.io/freeipa/issue/6968
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Currently we do not report what Subject DN or subject base will be
used for the CA installation. This leads to situations where the
administrator wants a different Subject DN later. Display these
data as part of the "summary" prior to the final go/no-go prompt in
ipa-server-install and ipa-ca-install.
The go/no-go prompt in ipa-ca-install is new. It is suppressed for
unattended installations.
Fixes: https://pagure.io/freeipa/issue/7246
Reviewed-By: Christian Heimes <cheimes@redhat.com>
When ipa-replica-install is called in a CA-less environment, the certs,
keys and pins need to be provided with --{http|dirsrv|pkinit}-cert-file and
--{http|dirsrv|pkinit}-pin. If the pin is not provided in the CLI options,
and in interactive mode, the installer prompts for the PIN.
The issue happens when the keys are not protected by any PIN, the installer
does not accept an empty string and keeps on asking for a PIN.
The fix makes sure that the installer accepts an empty PIN. A similar fix
was done for ipa-server-install in
https://pagure.io/freeipa/c/4ee426a68ec60370eee6f5aec917ecce444840c7
Fixes:
https://pagure.io/freeipa/issue/7274
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Replace custom file_exists() and dir_exists() functions with proper
functions from Python's stdlib.
The change also gets rid of pylint's invalid bad-python3-import error,
https://github.com/PyCQA/pylint/issues/1565
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
If LDAP or HTTP Server Cert are not issued by ipa ca, they are not tracked.
In this case, it is not necessary to add them to the tracking requests list.
https://pagure.io/freeipa/issue/7151
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-server-upgrade needs to configure certmonger with the right options
in order to track PKI, HTTP and LDAP certs (for instance the RA agent cert
location has changed from older releases).
The upgrade code looks for existing tracking requests with the expected
options by using criteria (location of the NSSDB, nickname, CA helper...)
If a tracking request is not found, it means that it is either using wrong
options or not configured. In this case, the upgrade stop tracking
all the certs, reconfigures the helpers, starts tracking the certs so that
the config is up-to-date.
The issue is that the criteria is using the keyword 'ca' instead of
'ca-name' and this leads to upgrade believing that the config needs to be
updated in all the cases.
https://pagure.io/freeipa/issue/7151
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Allow the MS/AD-CS target certificate template to be specified by
name or OID, via the new option --external-ca-profile.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
In cases when IPA is installed in two steps (external CA), it's
necessary to check (in the second step) if Dir. Server is
running before continue with the installation. If it's not,
start Directory Server.
https://pagure.io/freeipa/issue/6611
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
ipa-server-upgrade fails with Server-Cert not found, when trying to
track httpd/ldap server certificates. There are 2 issues in the upgrade:
- the certificates should be tracked only if they were issued by IPA CA
(it is possible to have CA configured but 3rd part certs)
- the certificate nickname can be different from Server-Cert
The fix provides methods to find the server crt nickname for http and ldap,
and a method to check if the server certs are issued by IPA and need to be
tracked by certmonger.
https://pagure.io/freeipa/issue/7141
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
When promoting a client to a replica we have to change sssd.conf,
deleting _srv_ part from 'ipa_server' property and setting
'ipa_server_mode' to true.
Previously, the wrong domain could be updated since the ipa_domain
variable was not being used properly.
https://pagure.io/freeipa/issue/7127
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Since ipaapi user is now created during RPM install and not in runtime,
we may switch back to shipping tmpfiles.d configuration directly in RPMs
and not create it in runtime, which is a preferred way to handle drop-in
configuration anyway.
This also means that the drop-in config will be shipped in /usr/lib
instead of /etc according to Fedora packaging guidelines.
This partially reverts commit 38c66896de.
https://pagure.io/freeipa/issue/7053
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Add `includedir /etc/krb5.conf.d` to /etc/krb5.conf only if
/etc/krb5.conf.d exists.
Do not rely on /etc/krb5.conf.d to enable the certauth plugin.
This fixes install on platforms which do not have /etc/krb5.conf.d.
https://pagure.io/freeipa/issue/6589
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
We cannot reliably determine when an IP Address is network or broadcast.
We allowed to use non-local IP addresses due container use cases, we
don't know subnets of used IP addresses.
https://pagure.io/freeipa/issue/4317
Reviewed-By: David Kupka <dkupka@redhat.com>
Enabling PKINIT often fails during server upgrade when requesting the KDC
certificate.
Now that PKINIT can be enabled post-install using ipa-pkinit-manage, avoid
the upgrade failure by not enabling PKINIT by default.
https://pagure.io/freeipa/issue/7000
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Wait until the local HTTP service entry is replicated to the remote master
before requesting the server certificate.
This prevents a replication conflict between the service entry added
locally and service entry added remotely when requesting the certificate.
https://pagure.io/freeipa/issue/6867
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Set `pkinit_pool` in `kdc.conf` to a CA certificate bundle of all CAs known
to IPA.
Make sure `cacert.pem` is exported in all installation code paths.
Use the KDC certificate itself as a PKINIT anchor in `login_password`.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Set `pkinit_anchors` in `krb5.conf` to a CA certificate bundle of CAs
trusted to issue KDC certificates rather than `/etc/ipa/ca.crt`.
Set `pkinit_pool` in `krb5.conf` to a CA certificate bundle of all CAs
known to IPA.
Make sure both bundles are exported in all installation code paths.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Replace trust flag strings with `TrustFlags` objects. The `TrustFlags`
class encapsulates `certstore` key policy and has an additional flag
indicating the presence of a private key.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Replace all uses of virtual profiles with `dogtag-ipa-ca-renew-agent-reuse`
and remove profile from the IPA CA certificate tracking request.
This prevents virtual profiles from making their way into CSRs and in turn
being rejected by certain CAs. This affected the IPA CA CSR with Microsoft
CS in particular.
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Use Dogtag's `caCACert` CA certificate profile rather than the
`ipaCACertRenewal` virtual profile for lightweight CA certificates.
The `ipaCACertRenewal` virtual profile adds special handling of externally
signed CA certificates and LDAP replication of issued certificates on top
of `caCACert`, neither of which is relevant for lightweight CA
certificates.
Remove all of the special casing of lightweight CA certificates from
dogtag-ipa-ca-renew-agent-submit.
Make sure existing lightweight CA certmonger tracking requests are updated
on server upgrade.
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Fix certmonger tracking requests on every run of ipa-server-upgrade rather
than only when the tracking configuration has changed and the requests have
not yet been updated.
This allows fixing broken tracking requests just by re-running
ipa-server-upgrade.
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Turn on NSSOCSP directive during install/replica install/upgrade.
That check whether the certificate which is used for login is
revoked or not using OSCP.
Marks the server cert in httpd NSS DB as trusted peer ('P,,')
to avoid chicken and egg problem when it is needed to contact
the OCSP responder when httpd is starting.
https://pagure.io/freeipa/issue/6370
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
During an upgrade, http.suffix is used to identify ldap entry when
configuring kdc proxy. When the suffix is missing, the script crashed
when enabling KDC proxy, because it used invalid DN.
Fixes https://pagure.io/freeipa/issue/6920
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
During upgrade keytab is moved to a new location using "move" operation.
This commit replaces move operation with "copy" and "remove" that
ensures a proper selinux context.
https://pagure.io/freeipa/issue/6924
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
ipa-server-install with external CA fails to issue pkinit certs.
This happens because the installer calls
krb = krbinstance.KrbInstance(fstore)
then
krb.enable_ssl()
and in this code path self.config_pkinit is set to None, leading to a wrong
code path.
The fix initializes the required fields of the krbinstance before calling
krb.enable_ssl.
https://pagure.io/freeipa/issue/6921
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Abhijeet Kasurde <akasurde@redhat.com>
When we're installing server with an external CA, the installation
would have failed in the second step where it's passed the required
CA cert file because it would have tried to perform the Kerberos
installation for the second time.
https://pagure.io/freeipa/issue/6757
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The exception handling of client install inside replica installation
was rather promiscuous, hungrily eating any possible exception thrown
at it. Scoped down the try-except block and reduced its promiscuity.
This change should improve the future development experience debugging
this part of the code.
https://pagure.io/freeipa/issue/6183
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
