When there were no updated attrs when modifying a nonexistent DNS record,
the error was not handled and caused an internal server error later (old_entry
was used uninitialized).
https://fedorahosted.org/freeipa/ticket/3055
Forward and reverse resolution of the newly created replica is already
checked via get_host_name (which calls verify_fqdn).
Add the same check for the existing master.
Additionally, if DNS is installed on the remote host, check forward
and reverse resolution of both replicas using that DNS only
(ignoring /etc/hosts). These checks give only warnings and, in interactive
installs, a "Continue?" prompt.
https://fedorahosted.org/freeipa/ticket/2845
The sssd.conf file is no longer left behind in case sssd was not
configured before the installation. However, the patch goes behind
the scope of this ticked and improves the handling of sssd.conf
during the ipa-client-install --uninstall in general.
The current behaviour (well documented in source code) is as follows:
- In general, the IPA domain is simply removed from the sssd.conf
file, instead of sssd.conf being rewritten from the backup. This
preserves any domains added after installation.
- If sssd.conf existed before the installation, it is restored to
sssd.conf.bkp. However, any IPA domains from pre-installation
sssd.conf should have been merged during the installation.
- If sssd.conf did not exist before the installation, and no other
domains than IPA domain exist in it, the patch makes sure that
sssd.conf is moved to sssd.conf.deleted so user experiences no
crash during any next installation due to its existence.
https://fedorahosted.org/freeipa/ticket/2740
When a new reverse zone is to be generated based on an IP address without
a network prefix length, we need to use some default value. While netaddr
library default ones (32b for IPv4 and 128b for IPv6) are not very sensible
we should use the defaults already applied in installers. That is 24b for
IPv6 and 64 for IPv6.
Test case has been added to cover the new default.
https://fedorahosted.org/freeipa/ticket/2461
There was an error in number validation check. If boundary value was an empty string, validation of a number always failed. This patch fixes the problem by not performing the check in these cases.
https://fedorahosted.org/freeipa/ticket/3066
Since we only can perform verification when AD admin credentials are available,
report that trust should be verified from the AD side in other cases,
including unsuccessful verification.
Once trust is added, status of it is never stored anywhere.
https://fedorahosted.org/freeipa/ticket/2763
We've been stopping both DS instances (main and PKI) when upgrading.
This can happen while the CA is running. In some cases stopping the PKI
DS also killed the CA.
Only stop the specific instance for upgrades.
Also, wait for open ports after the upgrade is complete. The wait was
skipped previously. This can prevent bugs if scripts that need a DS are
run after the upgrade.
https://fedorahosted.org/freeipa/ticket/3083
Put the changes from Ade's dogtag 10 patch into namespaced constants in
dogtag.py, which are then referenced in the code.
Make ipaserver.install.CAInstance use the service name specified in the
configuration. Uninstallation, where config is removed before CA uninstall,
also uses the (previously) configured value.
This and Ade's patch address https://fedorahosted.org/freeipa/ticket/2846
Dogtag 10 uses a new installer, new directory layout and new default
ports. This patch changes the ipa install code to integrate these changes.
https://fedorahosted.org/freeipa/ticket/2846
ipa-client-install crashed when IPA server anonymous access was
disabled and base DN was thus generated via realm_to_suffix
function which, however, returns a DN object and not string.
DN was converted to string, ipa-client-install no longer crashes
in this scenario.
https://fedorahosted.org/freeipa/ticket/3088
If you have a replication topology like A <-> B <-> C and you try
to delete server B that will leave A and C orphaned. It may also
prevent re-installation of a new master on B because the cn=masters
entry for it probably still exists on at least one of the other masters.
Check on each master that it connects to to ensure that it isn't the
last link, and fail if it is. If any of the masters are not up then
warn that this could be a bad thing but let the user continue if
they want.
Add a new option to the del command, --cleanup, which runs the
replica_cleanup() routine to completely clean up references to a master.
https://fedorahosted.org/freeipa/ticket/2797
This adds two new commands to ipa-replica-manage: list-ruv & clean-ruv
list-ruv can be use to list the update vectors the master has
configugured
clean-ruv can be used to fire off the CLEANRUV task to remove a
replication vector. It should be used with caution.
https://fedorahosted.org/freeipa/ticket/2303
Many attributes in IPA (e.g. manager, memberuser, managedby, ...)
are used to store DNs of linked objects in IPA (users, hosts, sudo
commands, etc.). However, when the linked objects is deleted or
renamed, the attribute pointing to it stays with the objects and
thus may create a dangling link causing issues in client software
reading the data.
Directory Server has a plugin to enforce referential integrity (RI)
by checking DEL and MODRDN operations and updating affected links.
It was already used for manager and secretary attributes and
should be expanded for the missing attributes to avoid dangling
links.
As a prerequisite, all attributes checked for RI must have pres
and eq indexes to avoid performance issues. Thus, the following
indexes are added:
* manager (pres index only)
* secretary (pres index only)
* memberHost
* memberUser
* sourcehost
* memberservice
* managedby
* memberallowcmd
* memberdenycmd
* ipasudorunas
* ipasudorunasgroup
Referential Integrity plugin is updated to enforce RI for all these
attributes. Unit tests covering RI checks for all these attributes
were added as well.
Note: this update will only fix RI on one master as RI plugin does
not check replicated operations.
https://fedorahosted.org/freeipa/ticket/2866
When LDAP updater detected an update instruction in indexing tree, it run
an indexing task and waited until it ends. However, the task was run
regardless of the update instruction result. This lead to unnecessary
index tasks being defined and waited for which makes the whole LDAP
last longer.
Execute indexing task only when an index add/update instruction is
successful.
https://fedorahosted.org/freeipa/ticket/2866
Attribute types of attributes designed to hold DN values are not
supposed to hold own ORDERING or SUBSTR matching rules (which were
even not correct in this case).
Update these attributes to only define an EQUALITY rule just like
other DN attribute types in IPA.
https://fedorahosted.org/freeipa/ticket/2866
AttributeType updates are sensitive to case, whitespace or X-ORIGIN mismatch
just like ObjectClass attribute which is already being normalized before
an update value is compared with update instructions.
Expand safe schema updater routine to cover both ObjectClasses and
AttributeTypes updates.
https://fedorahosted.org/freeipa/ticket/2440
When ADD command is being executed and a single-value object attribute
is being set with both option and addattr IPA ends up in an internal
error.
Make better value sanitizing job in this case and let IPA throw
a user-friendly error. Unit test exercising this situation is added.
https://fedorahosted.org/freeipa/ticket/2429
Numbers of long type were incorrectly serialized to JSON as empty strings when using json_serialize function. It caused problem in serialization of metadata for Web UI. This patch is fixing it.
Discovered after "Cast DNS SOA serial maximum boundary to long"
Both selinuxusermap-add and selinuxusermap-mod commands now behave
consistently in not allowing user/host category or user/host members
and HBAC rule being set at the same time. Also adds a bunch of unit
tests that check this behaviour.
https://fedorahosted.org/freeipa/ticket/2983
Facets which performs AJAX call after update refresh (clear dirty state) after calling callback of dirty dialog. It might lead to multiple openings of dirty dialog.
Assuming that calling dirty dialog's callback can be evaluated as "dirty state is gone", we can call reset in the callback to prevent the issue. There will be an incorrect state in the facet for a moment. It will be fixed soon on execute of callback of the refresh AJAX call. It is not an issue because it will happen in background. User will be looking on different facet.
https://fedorahosted.org/freeipa/ticket/2667
When clients install, they use kinit to obtain a TGT, which uses DNS to find
the KDC to connect to. It might happen that the newly created principal
has not replicated to selected KDC yet, making kinit fail and aborting the
install.
The client sets a temporary krb5 config file while installing via $KRB5_CONFIG.
Modify this file so that the kerberos library only uses the specific server
we're installing under, and call kinit while it's still in place.
Clean up the configure_krb5_conf function to remove unused arguments. For
clarity, use keyword arguments when calling it.
https://fedorahosted.org/freeipa/ticket/2982
Format of ipasshpubkey in users and hosts changed from BYTES to STR. Web UI no longer gets the value as base64 encoded string in a object.
Label was changed to reflect that the key don't have to be plain base64 encoded blob.
https://fedorahosted.org/freeipa/ticket/2989
Public keys in the old format (raw RFC 4253 blob) are automatically
converted to OpenSSH-style public keys. OpenSSH-style public keys are now
stored in LDAP.
Changed sshpubkeyfp to be an output parameter, as that is what it actually
is.
Allow parameter normalizers to be used on values of any type, not just
unicode, so that public key blobs (which are str) can be normalized to
OpenSSH-style public keys.
ticket 2932, 2935
The restart_dirsrv script wasn't initializing the api so the
startup_timeout wasn't available.
The subsystemCert cert-pki-ca definition was missing so we didn't
know which certificate to update in CS.cfg.
Add some documentation and a pause between restarts for the
renew_ca_cert script so that when the CA subsystem certs are renewed
they don't all try to restart the CA at the same time.
https://fedorahosted.org/freeipa/ticket/3006
