test_integration/test_installation.py::TestInstallMaster 's
timeout is 10800 on all nightlies but it timeouts in gating with a
timeout of 3600. Use 7200 in gating so that it has some chance of
completing.
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
test_cert and test_SubCAkeyReplication are randomly failing.
The suspect for test_SubCAkeyReplication is an nss bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1985061
The reason for test_cert failures was not identified, the only
relevant line in the log contains:
2021-07-22T17:37:21.0873339Z tests: cert, result: 1, time: 30:08.98
2021-07-22T17:37:21.0874172Z Command exited with non-zero status 1
Disable these tests in gating until the NSS bug is fixed and
the related build is available in Fedora.
Related: https://pagure.io/freeipa/issue/8864
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
test_installation.TestInstallMaster, test_advise,
and test_integration.test_commands.TestIPACommand rely on DNS
forwarders and hit a known BIND bug:
https://gitlab.isc.org/isc-projects/bind9/-/issues/2728
quite often.
This is blocking gating nearly completely.
Disable these tests in gating until the bug is fixed and
the related build is available in Fedora.
Related: https://pagure.io/freeipa/issue/8864
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Use the new role-based mechanism, one that doesn't rely
on direct communication to the server, to determine whether
the server being removed by `ipa server-del` contains the
last KRA server.
https://pagure.io/freeipa/issue/8397
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
It previously used a vault connection to determine if any
KRA servers were installed. This would fail if the last KRA
was not available.
Use server roles instead to determine if the last KRA server
is to be removed.
https://pagure.io/freeipa/issue/8397
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
A kinit immediately following a password change can fail.
Setting KRB5_TRACE and retrieving kdcinfo will help to understand
the cause of failure.
Fixes: https://pagure.io/freeipa/issue/8929
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Change documentation:
https://download.samba.org/pub/samba/rc/samba-4.15.0rc1.WHATSNEW.txt
As of Samba 4.15rc1, smbclient does not accept "-k" anymore.
The "-k|--kerberos" option ("Try to authenticate with kerberos.")
has been replaced with "--use-kerberos=required|desired|off".
Fixes: https://pagure.io/freeipa/issue/8926
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The webui tests for ID range evaluate a potentially free id range
by looking for existing ranges and picking a range = max value
+ 1 million.
With the addition of subuid range this algorithm produces values
over the limit because the subuid range goes from
2,147,483,648 to 4,294,836,224 and the max base id is 4,294,967,295.
Ignore the subuid range when picking a potential range.
Fixes: https://pagure.io/freeipa/issue/8919
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The index definition for memberOf is inconsistent:
dn: cn=memberOf,cn=index,cn=userRoot,cn=ldbm database,cn=plugins,cn=config
cn: member
nsIndexType: eq
nsIndexType: sub
nsSystemIndex: false
objectClass: top
objectClass: nsIndex
The cn attribute should be memberOf, not member. Fix the definition.
Fixes: https://pagure.io/freeipa/issue/8920
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-server-trust-ad subpackage need to pull in sssd-winbind-idmap
Fixes: https://pagure.io/freeipa/issue/8923
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When a cert is revoked, a notification is displayed
and may obscure the buttons. Make sure to close the
notification before moving to the next step.
Fixes: https://pagure.io/freeipa/issue/8911
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
When adding a new host the principal cannot be determined because it
relies on either:
a) an entry to already exist
b) krbprincipalname be a component of the dn
As a result the full dn is being passed into ipapython.Kerberos
which can't parse it.
Look into the entry in validate_validate_auth_indicator() for
krbprincipalname in this case.
https://pagure.io/freeipa/issue/8206
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
KRA instance import depends on lib389 package, which is not always
installed and that results in failure. Furthermore, test_installation
utilizes krainstance import. This fix moves relevant parts from
krainstance to ipalib constants where those are subsequently imported
from.
Related: https://pagure.io/freeipa/issue/8795
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Test if when the system is completely healthy, informative message is
returned and not only empty output (list or json).
Related: https://pagure.io/freeipa/issue/8892
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test TestSelfExternalSelf::test_switch_back_to_self_signed
is checking the content of the journal using journalctl --since ...
but provides only the time, not the whole date with year-month-day.
As a consequence, if the test is executed around midnight it may
find nothing in the journal because it's looking for logs after 11:50PM,
which is a date in the future.
Fixes: https://pagure.io/freeipa/issue/8918
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
It required support in dogtag which was added in 10.5.0.
This is only easily configurable during installation because
it will set ca.signing.defaultSigningAlgorithm to the
selected algorithm in CS.cfg
The certificate profiles will generally by default set
default.params.signingAlg=- which means use the CA default.
So while an existing installation will technically allow
SHA384withRSA it will require profile changes and/or
changing the defaultSigningAlgorithm in CS.cfg and
restarting (completely untested). And that won't affect
already issued-certificates.
https://pagure.io/freeipa/issue/8906
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
- add "Subordinate ID Statistics" page
- add button for generating subid in "Subordinate ids" tab of user details page
- allow to navigate directly to owner details from subordinate id page
- adjust i18n strings
Ticket: https://pagure.io/freeipa/issue/8361
Signed-off-by: Serhii Tsymbaliuk <stsymbal@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Subordinate ids are now handled by a new plugin class and stored in
separate entries in the cn=subids,cn=accounts subtree.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
New LDAP object class "ipaUserSubordinate" with four new fields:
- ipasubuidnumber / ipasubuidcount
- ipasubgidnumber / ipasgbuidcount
New self-service permission to add subids.
New command user-auto-subid to auto-assign subid
The code hard-codes counts to 65536, sets subgid equal to subuid, and
does not allow removal of subids. There is also a hack that emulates a
DNA plugin with step interval 65536 for testing.
Work around problem with older SSSD clients that fail with unknown
idrange type "ipa-local-subid", see: https://github.com/SSSD/sssd/issues/5571
Related: https://pagure.io/freeipa/issue/8361
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
At the end of a server installation, the DNS records for
ipa-ca.$DOMAIN are created/updated with the IP addresses of the
new server.
The current code resolves the IP addresses of the new server
but doesn't check them. This can result in the addition of
a link-local address to ipa-ca record.
For each address, make sure that it's neither reserved nor a
link-local address.
Fixes: https://pagure.io/freeipa/issue/8810
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
augeas 1.12.1-0.1 adds support for the new chony configuration
settings.
Related: https://pagure.io/freeipa/issue/8676
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
The man page needs to clarify in which case the command needs
to be run.
Fixes: https://pagure.io/freeipa/issue/8913
Reviewed-By: Francois Cami <fcami@redhat.com>
The command
ipa stageuser-add --user-auth-type=xxx
is currently failing because the objectclass ipauserauthtypeclass
is missing from the created entry.
There is code adding the missing objectclass in the
pre_common_callback method of user_add, and this code should
be common to user_add and stageuser_add. In order to avoid code
duplication, it makes more sense to move the existing code to
pre_common_callback of baseuser_add, that is called by both
classes.
Fixes: https://pagure.io/freeipa/issue/8909
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The spec file requires python3-coverage although it is not
used in the project.
Fixes: https://pagure.io/freeipa/issue/8905
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Authentication indicators should not be added to internal IPA services,
since this can lead to a broken IPA setup. In case a client with
an auth indicator set in its host principal, promoting it to a replica
should fail.
Related: https://pagure.io/freeipa/issue/8206
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Authentication indicators should not be enforced against internal
IPA services, since not all users of those services are able to produce
Kerberos tickets with all the auth indicator options. This includes
host, ldap, HTTP and cifs in IPA server and cifs in IPA clients.
If a client that is being promoted to replica has an auth indicator
in its host principal then the promotion is aborted.
Fixes: https://pagure.io/freeipa/issue/8206
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
perf_counter_ns is only available in Python 3.7 and later.
Define a lambda for 3.6 and lower.
Fixes: https://pagure.io/freeipa/issue/8891
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a smoke test to make sure the server can be set in debug mode
without issue.
Related: https://pagure.io/freeipa/issue/8891
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Related: https://pagure.io/freeipa/issue/8891
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Some plugins, notably dns, modifies a returned entry in order
to compare it to the user-provided info (e.g. dnsrecord-del).
This modification was done on the cached entry directly rather
than a copy which caused unexpected results, mostly
EmptyResult because the cached entry was changed directly so
the next get_entry returned the same modified entry.
In addition, on a hit in the LDAP cache the entire cached entry
was returned regardless of what attributes were requested.
The automember condition add/remove calls only request the
inclusive/exclusive rule attributes and loop over the returned
values to look for duplicates. This was failing because the queried
entry contains attributes that the candidate entry does not contain.
The automember code is:
old_entry = ldap.get_entry(dn, [attr])
for regex in old_entry.keys():
if not isinstance(entry_attrs[regex], (list, tuple)):
old_entry, returned from the cache, contained objectclass, cn,
description, etc. which don't exist in the candidate entry so
entry_attrs[regex] threw a KeyError.
To return a copy of the entry and requested attributes on a
search HIT.
Also be more careful when storing the attributes in the cache entry.
The returned attributes may not match the requested. So store the
attributes we actually have.
This issue was exposed by Ansible which maintains a larger and
longer-lived cache because commands are executed in the server context
one after another, giving the cache a chance to build up.
Adjust the expected test results as well. In test_get_testuser()
the first request asks for all attributes (default) so ensure
that is successful since a user_add gets all attributes in
the post_callback. Next request a subset of the attributes which
is also a hit and confirm that only those requested were returned.
https://pagure.io/freeipa/issue/8897
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
test_commands.py testsuite is failing due to
'RunPytest timed out after 4800s'
Hence the timeout has been increased from 4800 to 5400
Ref: https://github.com/freeipa-pr-ci2/freeipa/pull/996
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Previously there were no tests for `ipalib.misc` module.
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Previously there were no tests for `ipalib.misc` module.
Fixes: https://pagure.io/freeipa/issue/8898
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The plugin `plugins` iterates over the keys of API instance,
__iter__ of which is a generator of class.__name__ from
(Command, Object, Method, Backend, Updater). So, the allowed type
is str, not bytes.
Fixes: https://pagure.io/freeipa/issue/8898
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If dynamic DNS updates are selected, sssd will use GSS-TSIG
by default for nsupdate.
When ipa-client-install notices that plain nsupdate is required,
switch sssd to use no authentication for dynamic updates too.
Fixes: https://pagure.io/freeipa/issue/8402
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-client-install invokes nsupdate with GSS-TSIG at client
enrollment time. If that fails, no retry is done.
Change that behavior to try again without GSS-TSIG.
Fixes: https://pagure.io/freeipa/issue/8402
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
No need to flush buffers on the nsupdate file as it will get
removed at the end of the function.
Related: https://pagure.io/freeipa/issue/8402
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Big numbers are automatically translated to scientific notation in JavaScript.
It causes an issue with some certificate serial numbers.
The fix normalizes the notation base on original value from serial_number_hex.
The implementation works only for browsers that support BigInt.
It would not work for old browsers like Internet Explorer.
Ticket: https://pagure.io/freeipa/issue/8754
Signed-off-by: Serhii Tsymbaliuk <stsymbal@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
As of 0.9 freeipa-healthcheck requires running `dirsrv` service
for `IPAHostKeytab` check. So, previous assumption about the
triggering the GSSAPI error no longer works. For example, this can
be achieved by deletion of host's keytab.
Fixes: https://pagure.io/freeipa/issue/8889
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
