healthcheck related tests are failing because of the below issue
"client @0x7f8ee47c4d48 : servfail cache hit (CD=0)"
and as a result healthcheck related packages are not downloaded on test
system.
Hence adding the --no-dnssec-validation option to install_master
and install_replica function
https://pagure.io/freeipa/issue/9151
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Allow npm to install and use latest grunt that is compatible with newer
OpenSSL.
This, in turn, requires ATK interfaces to be present for the chromium
installed by puppeteer.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Newer grunt will pull a PhantomJS that is compatible with newer OpenSSL
so the workaround is not needed anymore.
Additionally, OpenSSL 3.0 is more strict and does not tolerate
non-existing default configuration file.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Use fedora-toolbox:36 image as it is prepared to work with systemd and
sudo
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
subid range management does not allow to delete ranges
If subid range was allocated, it cannot be removed because there might
be file objects associated with it on one of IPA clients.
In Web UI a button to remove the range should not be shown.
Remove corresponding test from the Web UI test for subid as the button
to remove the subid range is not present anymore.
Fixes: https://pagure.io/freeipa/issue/9150
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
The test is calling getcert rekey -G DSA in order to rekey
a certificate with a DSA key, but DSA support has been disabled
in the default crypto policy, and certmonger does not support it
any more (see the BZ
https://bugzilla.redhat.com/show_bug.cgi?id=2066439)
Remove the test as it's not relevant anymore. The rekey
operation is tested anyway in other tests:
- test_certmonger_rekey_keysize
- test_rekey_keytype_RSA
- test_rekey_request_id
Fixes: https://pagure.io/freeipa/issue/9140
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Documentation generator can be run inside Python virtual environment.
This allows to isolate from the system-wide changes and add Sphinx
extensions that aren't packaged in a distribution.
The only exception right now is plantuml package. We rely on plantuml to
generate diagrams and since it is written in Java, it cannot be
installed directly into the Python venv through 'pip' tool.
Fixes: https://pagure.io/freeipa/issue/9148
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The file epn.conf has been updated when fixing issue 9145
and the test test_epn.py::TestEPN::test_EPN_config_file
is comparing its sha256sum with the checksum of the
shipped file from the package ipa-client-epn.
The expected checksum needs to be updated.
Fixes: https://pagure.io/freeipa/issue/9146
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The tests
TestNonPosixAutoPrivateGroup::test_idoverride_with_auto_private_group
and
TestPosixAutoPrivateGroup::test_gidnumber_not_corresponding_existing_group
are expected to fail until SSSD fixes issues 5988 and 5989.
They currently define an xfail_context with a condition based on
sssd version but that condition is wrong (as of today, no version
of sssd provides the fix).
Remove the wrong condition so that the test is always expected to fail.
Fixes: https://pagure.io/freeipa/issue/9141
Reviewed-By: Anuja More <amore@redhat.com>
In many cases it is impossible to investigate test failures of
environments where a trust to Active Directory is establishe without
Samba logs.
Collect Samba logs by default and make sure Samba is configured with
higher log levels if we are going to configure IPA to setup trust to
Active Directory.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
topologysegment name can be different depending on suffix.
This patch determines and supply the name of topologysgement
as per the suffix
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is no guarantee for the topologysegement name, it could be
master-to-replica or replica-to-master. If it is master-to-replica
then --right should be used with the command else --left.
Fixes: https://pagure.io/freeipa/issue/9137
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Continuation of the commit 2eee5931d7:
Use AD-SUPPORT subpolicy when testing trust to Active Directory in FIPS
mode. This is required in FIPS mode due to AD not supporting Kerberos
AES-bases encryption types using FIPS-compliant PBKDF2 and KDF, as
defined in RFC 8009.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
This test checks that when
'pki.server.healthcheck.clones.connectivity_and_data' check is run
'Source 'pki.server.healthcheck.clones.connectivity_and_data' not found'
is not displayed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2041995
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test is calling run_command with a list of arguments:
run_command(['rm', '-f', paths.CERTMONGER_REQUESTS_DIR + '/*'])
but this format does not support shell expansion.
Replace with a str parameter:
run_command('rm -fv' + paths.CERTMONGER_REQUESTS_DIR + '/*')
to make sure all the files in the directory are actually removed.
Fixes: https://pagure.io/freeipa/issue/8506
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
test_ipahealthcheck_expiring is moving the date in the future
in order to check that certmonger properly warns about expiring
certificates, then uninstalls the master.
The uninstallation randomly fails with a DBus error communicating
with certmonger because of a contention between certmonger being
waken up by the call to stop tracking certs and the certmonger
helpers trying to renew the certs.
The test is stopping PKI server, then moves the date in the future.
At this point, certmonger is still running (we are testing that
getcert list properly warns about near expiration). This means that
chances are high that certmonger has enough time to launch the CA helper
for renewal, that takes the lock. But since PKI is down, the helper
remains running for a while and does not release the lock. Then
certmonger is stopped, the tracking files are removed, certmonger is
restarted.
To avoid the contention, manually remove the tracking before
calling uninstall and remove the renewal lock file.
Fixes: https://pagure.io/freeipa/issue/9123
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This makes automount configurable only using sssd and not LDAP.
The reason is that authselect 1.3 no longer supports
user-nsswitch.conf which is where we made direct changes to the
nss configuration on Fedora/RHEL.
The equivalent option was removed from ipa-client-install in
https://pagure.io/freeipa/issue/7671
Fixes: https://pagure.io/freeipa/issue/9084
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When an entry is loaded the incoming values are converted
into python datatypes automatically based on the _SYNTAX_MAPPING
value in ipaldap.
When using delattr to remove a mapped value it will fail because
the datatypes do not match up. For example date types are
datetime.datetime structions and won't match a generalized time
string.
So try to map the value to delete using _SYNTAX_MAPPING before
trying to remove the value. Fall back to trying to remove the
raw value if the mapping fails.
This won't work for some mapping types, DNs for example. Providing
only the RDN value for a DN-type, manager for example, lacks the
context to know how to construct the DN (RDN and contaner).
Fixes: https://pagure.io/freeipa/issue/9004
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When minlife > maxlife specified on commandline, it says:
"ipa: ERROR: invalid 'maxlife': Maximum password life must be
greater than minimum."
But when minlife == maxlife specfied, It works.
This test check that error message says what exactly it does
related: https://pagure.io/freeipa/issue/9038
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
SPAKE is based on the crypto primitives which are not FIPS compliant
yet. This means that in FIPS mode use of 'hardened' authentication
indicator is not possible. Skip corresponding tests in FIPS mode.
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
paramiko cannot be used in FIPS mode. We have few tests that import
generic methods from test_otp (add_token/del_token) and those tests fail
in FIPS mode due to unconditional 'import paramiko'.
Instead, move 'import paramiko' to the ssh_2f() helper which is not used
in FIPS mode (the whole SSH 2FA test is skipped then).
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The subCA keys are loaded out-of-band after creation into the
CA so they may have been replicated but not loaded. Give more
time for them to appear in the remote CA.
Use a loop for the checking instead of a raw sleep because most
of the time this is very fast (< 15 seconds) but sometimes it
requires just a bit more. Allow up to 60 seconds.
To avoid output difference, strip the token name out of certutil
output. We don't care about the token a certificate is stored
in, the internal or the FIPS token. We just care that they exist
on both servers and that the keys match.
Apparently in some cases the token name is displayed and not in
others so lets normalize the output to make comparisons more
consistent.
Fixes: https://pagure.io/freeipa/issue/9096
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Cleanup up no longer used Pylint's disables where possible.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
As of Python3 `currentThread`, `thread.getName` are aliases for
`threading.current_thread()` and `threading.Thread.name`
respectively.
In Python3.10:
> bpo-43723: The following threading methods are now deprecated and
should be replaced:
currentThread => threading.current_thread()
activeCount => threading.active_count()
Condition.notifyAll => threading.Condition.notify_all()
Event.isSet => threading.Event.is_set()
Thread.setName => threading.Thread.name
thread.getName => threading.Thread.name
Thread.isDaemon => threading.Thread.daemon
Thread.setDaemon => threading.Thread.daemon
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> New checker consider-using-dict-items. Emitted when iterating over
dictionary keys and then indexing the same dictionary with the key
within loop body.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The klass property is referenced to class attribute.
Today's Pylint doesn't support this.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The type of value to be compared is class attribute.
Today's Pylint doesn't support this.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> Emitted when iterating over the dictionary items (key-item pairs) and
accessing the value by index lookup. The value can be accessed directly
instead.
Note: in Python3 removing from dict during an iteration is not
possible even. For example,
```
cat a.py
d = {"a": 1}
for k, v in d.items():
if v is not None:
del d[k]
python3 a.py
Traceback (most recent call last):
File "/usr/src/RPM/BUILD/freeipa/a.py", line 3, in <module>
for k, v in d.items():
RuntimeError: dictionary changed size during iteration
```
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There is no actual usage of deprecated classes for Python3.
Pylint complains about such for Python2. Since Python2 is no
longer supported these imports were removed.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`__home` has been added in 8ca44bcbfa,
later `tests.util` was refactored in
fd43b39145, but `__home` wasn't cleaned
up.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9.0 new checker:
> Emitted when accessing only the first or last element of str.split().
The first and last element can be accessed by using str.split(sep,
maxsplit=1)[0] or str.rsplit(sep, maxsplit=1)[-1] instead.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Use AD-SUPPORT subpolicy when testing trust to Active Directory in FIPS
mode. This is required in FIPS mode due to AD not supporting Kerberos
AES-bases encryption types using FIPS-compliant PBKDF2 and KDF, as
defined in RFC 8009.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The test
test_integration/test_installation.py::TestInstallWithoutNamed
was missing in some nightly definitions.
Add the job definition for:
- nightly_latest_selinux.yaml
- nightly_latest_testing.yaml
- nightly_latest_testing_selinux.yaml
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The example text included a trailing dot which isn't actually
allowed in a system hostname (just DNS). Remove the suggestion
to include it and strip off any trailing dot so that the install
can proceed.
Related: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The refactor change 9094dfc had a slight error where the
user-input provided value in input wasn't being validated. Only
the command-line or the current FQDN was being verified so
if the FQDN was bad any value input by the user was being skipped.
Fixes: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Added tests using posix AD trust and non posix AD trust.
For option --auto-private-groups=[hybrid/true/false]
Related : https://pagure.io/freeipa/issue/8807
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
On RHEL tests are randomly failing because of this check
and the test doesn't need to check this.
Related : https://pagure.io/freeipa/issue/9108
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is some contention between certmonger starting during the
uninstallation process in order to stop the tracking and activity
going on within certmonger helpers.
As near as I can tell certmonger is not running, then IPA is
stopped in order to uninstall, then certmonger is started to stop
the tracking. certmonger checks cert status on startup but since
IPA isn't running it can't get a host ticket. During this time any
request over DBus may time out, causing a test to fail when we're
just trying to clean up.
https://pagure.io/freeipa/issue/8506
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This test checks that ipa-ccache-sweep.timer is enabled by default
during the ipa installation.
related: https://pagure.io/freeipa/issue/9107
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The new images include 389-ds-base 2.0.14-1
which contains the fixes for the following tickets:
389-ds-base #5079 Freeipa nightly test failure with winsync agreement
389-ds-base #5031 ipa-restore broken in selinux enforcing mode
Fixes: https://pagure.io/freeipa/issue/9069
Fixes: https://pagure.io/freeipa/issue/9051
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
OpenLDAP 2.6+ finally deprecated -h and -p options in all its command
line tools. They are not allowed anymore and cause ldap* tools to stop
hard with 'unknown option' error.
Fix this by always using -H url option instead. Deriving default value
for -H url from the configuration file still works, it is only -h and -p
that were deprecated.
See also: https://bugs.openldap.org/show_bug.cgi?id=8618
Fixes: https://pagure.io/freeipa/issue/9106
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test TestIpaClientAutomountFileRestore expects a
specific order for the automount sources to query
in /etc/nsswitch.conf.
With authselect update 1.3.0, the databases are sorted in
order of likelihood and the following line in seen:
automount: files sss
instead of
automount: sss files
Since the test doesn't care about the order but rather about
the list of sources, ignore the order.
Fixes: https://pagure.io/freeipa/issue/9067
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
FullLoader class for YAML loader was introduced in version 5.1 which
also deprecated default loader. SafeLoader, however, stays consistent
across the versions and brings added security.
This fix is necessary as PyYAML > 5.1 is not available in downstream.
Related: https://pagure.io/freeipa/issue/9009
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a test to test_config_plugin, that calls ipa config-mod
with the same value as already present in LDAP.
The call must return EmptyModlist.
Related: https://pagure.io/freeipa/issue/9063
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Added web-ui tests to verify where operations
using subordinate ids are working as expected.
Related : https://pagure.io/freeipa/issue/8361
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Following test cases would be checked:
- when called with --principal (it should then prompt for a password)
- when called with --principal / --password
- when called without principal and password but with a kerberos TGT,
kinit admin done before calling ipa-replica-conncheck
- when called without principal and password, and without any kerberos
TGT (it should default to principal=admin and prompt for a password)
related: https://pagure.io/freeipa/issue/9047
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When empty cert request is submitted to certmonger, it goes to
segfault. This fix test that if something like this happens,
certmonger should gracefuly handle it
and some PEP8 fixes
related: https://pagure.io/certmonger/issue/191
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
The test sets 389-ds nsslapd-idletimeout to 60s, then does a
kinit with an otp token (which makes ipa-otpd create a LDAP
connection), then sleeps for 60s. The expectation is that
ns-slapd will detect that the LDAP conn from ipa-otpd is idle
and close the connection.
According to 389ds doc, the idle timeout is enforced when the
connection table is walked. By doing a ldapsearch, the test
"wakes up" ns-slapd and forces the detection of ipa-otpd
idle connection.
Fixes: https://pagure.io/freeipa/issue/9044
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Fixture `expire_certs` moves date back after renewing the certs.
This is causing the ipa-replica to fail. This fix first uninstalls
the server then moves back the date.
Fixes: https://pagure.io/freeipa/issue/9052
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Signed-off-by: Timo Aaltonen <tjaalton@debian.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pkeys are not used anywhere in the method thus can be removed.
Related: https://pagure.io/freeipa/issue/9036
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
In scenario:
1. make sure that reverse zone doesn't have the desired PTR record
2. open host page of the host with matchnig the A record, e.g.: https://server.pvoborni.test/ipa/ui/#/e/host/details/test2.pvoborni.test
3. click on the "Host name" link, it will bring us to it's DNS record page. E.g., https://server.pvoborni.test/ipa/ui/#/e/dnsrecord/details/pvoborni.test&test2
! notice the missing '.' in the URL after zone name (pvoborni.test)
4. click on the A record , dialog will show up, saying "record not found"
5. click on the "create DNS record"
PTR record created by Web UI doesn't have trailing '.' (is not fully
qualified record) even if the DNS zone is.
This patch is fixing the link to the DNS Record page so that the
page then correctly gets the DNS Zone name and thus creates a correct
fully qualified PTR record.
https://bugzilla.redhat.com/show_bug.cgi?id=2009114https://pagure.io/freeipa/issue/9036
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test definition is missing the instruction to update
the packages.
Fixes: https://pagure.io/freeipa/issue/9035
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Moving 'latest' to Fedora 35 and 'previous' to Fedora 34.
Update Rawhide template.
Based on https://github.com/freeipa/freeipa-pr-ci/pull/445.
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The test failure is a known issue, happening on f33+. Mark as xfail
until 8700 is fixed.
Related: https://pagure.io/freeipa/issue/8700
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Because the sidgen plugin is a postop plugin, it is not
always triggered before the result of an ADD is returned
and the objectclasses of the user may / may not contain
ipantuserattrs.
Fix the get_user_result method to work in all the cases.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The API schema is not checked for changes until after a TTL
is expired. A one-hour TTL was hardcoded which makes development
tedious because the only way to force a schema update is to
remember to remove files between invocations.
This adds a new environment variable, schema_ttl, to configure
the TTL returned by the server to schema() calls. This can be
set low to ensure a frequent refresh during development.
If the client is in compat mode, that is if client is working
against a server that doesn't support the schema() command,
then use the client's schema_ttl instead so that the user still
has control.
Re-check validity before writing the cache. This saves us both
a disk write and the possibility of updating the expiration
with a ttl of 0. This can happen if the fingerprint is still
valid (not expired, no language change) the schema check is
skipped so we have no server-provided ttl.
https://pagure.io/freeipa/issue/8492
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Fixture issue_and_expire_cert() kinit after moving the date to
expire certs. This fix is to rely on kinit from fixture.
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The SID is not expected to be returned by ipa user-add.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Now that SID are always generated, the creation of a new
local idrange is refused if baserid is missing.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The integration tests that check backup-reinstall-restore
scenario need to clear sssd cache before checking the uid
of the admin user. For instance:
backup: saves the original admin uid
reinstall: creates a new admin uid, potentially cached by SSSD
restore: restores the original admin uid
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
From now on, new users/groups automatically get a SID.
Update the expect test outputs.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The interactive server installation now prompts for netbios
name confirmation.
Add expected prompt and send response to the installer.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The standard installer now configures all the items needed
for SID generation. Add a new test with the following scenario:
- install IPA server
- create an active user
- ensure the user's entry has an attribute ipantsecurityidentifier
- ensure that the kerberos ticket for the user contains PAC data
by using the utility ipa-print-pac
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Test Steps:
1. Setup a freeipa server and a replica
2. Stop ipa-custodia service on replica
3. Create a LWCA on the replica
4. Verify LWCA is recognized on the server
5. Run `ipa ca-show <LWCA>`
BZ Link: https://bugzilla.redhat.com/show_bug.cgi?id=1958788
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
New PR-CI template based on compose `Fedora-Rawhide-20211021.n.0`,
future Fedora 36.
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Previously, `test_master_install_ca1` and `test_master_install_ca2`
attempt to create tempdirs on local host and later write some
content into the returned paths on remote host. This fails if
a remote host is a local one.
The existent `create_temp_file` function has been extended to
support `suffix` option of `mktemp`.
Fixes: https://pagure.io/freeipa/issue/9013
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Default YAML loader has been deprecated in PyYAML-6.0, specify loader explicitly.
Fixes: https://pagure.io/freeipa/issue/9009
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
I don't know why this wasn't always multi-value but if one wanted
to set multiple options they needed to call add-option multiple
times. The LDAP attribute is already multi-value.
This shouldn't cause API issues as it understood the attribute as
multi-value just didn't expose it. Client output on the CLI will
look a bit different:
Added option "('one', 'two')" to Sudo Rule "test"
or
Added option "(u'one', u'Two')" to Sudo Rule "test"
instead of with this change:
Added option "one,two" to Sudo Rule "test"
Removing an option works in a similar way.
The value is normalized on the client side in order to ensure that
the option value is always a tuple.
https://pagure.io/freeipa/issue/2278
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The above test is installing 2 Let's Encrypt certificates:
the root ISRG Root X1 and a subca. The subca expired Oct 6 and needs to
be replaced with a valid one, otherwise ipa-cacert-manage install
refuses to install it.
Fixes: https://pagure.io/freeipa/issue/9006
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Get size of the log file immediately before main test action to avoid
capturing messages written to log during environment preparation.
Fixes https://pagure.io/freeipa/issue/8987
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test test_undo_refresh_reset_update_cancel is sometimes
failing because a notification obscures the selinuxmap record.
After saving the modification on the record, close any notification
to make sure the test succeeds.
Fixes: https://pagure.io/freeipa/issue/8846
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
The test TestIpaHealthCheckWithExternalCA::test_ipahealthcheck_ipaopensslchainvalidation
needs to be adapted with the new error message returned by
openssl verify when the provided certificate file does not exist.
The message changed with openssl3.
Fixes: https://pagure.io/freeipa/issue/8999
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
With the new version sos-4.2-1, sos report -v prints the
debug messages into sos.log only. In order to see the debug
messages in the console, -vv is needed.
For more info refer to sos report commit
1d0729a9dc
Since the test is looking for messages in stdout, use -vv to
make sure the expected messages are printed in the console.
Fixes: https://pagure.io/freeipa/issue/9000
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Tracker is the best for testing plugins dealing with LDAP.
The tests in test_schema_plugin are not used LDAP at all.
Fixes: https://pagure.io/freeipa/issue/8954
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Prevent regressions in the LDAP cache layer that caused newly
issued certificates to overwrite existing ones.
https://pagure.io/freeipa/issue/8986
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
