If LDAP or HTTP Server Cert are not issued by ipa ca, they are not tracked.
In this case, it is not necessary to add them to the tracking requests list.
https://pagure.io/freeipa/issue/7151
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-server-upgrade needs to configure certmonger with the right options
in order to track PKI, HTTP and LDAP certs (for instance the RA agent cert
location has changed from older releases).
The upgrade code looks for existing tracking requests with the expected
options by using criteria (location of the NSSDB, nickname, CA helper...)
If a tracking request is not found, it means that it is either using wrong
options or not configured. In this case, the upgrade stop tracking
all the certs, reconfigures the helpers, starts tracking the certs so that
the config is up-to-date.
The issue is that the criteria is using the keyword 'ca' instead of
'ca-name' and this leads to upgrade believing that the config needs to be
updated in all the cases.
https://pagure.io/freeipa/issue/7151
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The message about an error during replica setup was causing the
users to think the installation gone wrong even though this was
an expected behavior when ipa-replica-install was ran without
--no-pkinit flag and CA somehow is not reachable which defines
that there is something wrong in a topology but does not lead
to failure of the replica's installation. So now installation
will not print error messages to stdout but rather will give a
recomendation to user and write the old error message to log
as a warning so it still will be easy to find if needed.
https://pagure.io/freeipa/issue/7179
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
This is causing python2 tests print ugly warnings about the
deprecation of the `message` attribute in python2.6.
https://pagure.io/freeipa/issue/7131
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
If the # of group memberships exceeded the search size limit
then SizeLimitExceeded was raised. Being in too many groups
should not cause a *_show to fail.
https://pagure.io/freeipa/issue/7112
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
For an externally-signed CA, if an earlier run of ipa-cacert-manage
was interrupted, the CA name in the IPA CA tracking request may have
been left as "dogtag-ipa-ca-renew-agent-reuse" (it gets reverted to
"dogtag-ipa-ca-renew-agent" at the end of the CSR generation
procedure). `ipa-cacert-manage renew` currently only looks for a
tracking request with the "dogtag-ipa-ca-renew-agent" CA, so in this
scenario the program fails with message "CA certificate is not
tracked by certmonger".
To handle this scenario, if the IPA CA tracking request is not
found, try once again but with the "dogtag-ipa-ca-renew-agent-renew"
CA name.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Update ipa-cacert-manage to support the MS V2 certificate template
extension.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Allow the MS/AD-CS target certificate template to be specified by
name or OID, via the new option --external-ca-profile.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Firefox extension which served for configuring Kerberos auth in Firefox
until version which banned self-signed extensions was removed in commit
6c53765ac1.
Given that configure.jar, even older Firefox config tool, was removed
sometime before that, there is no use for signtool tool. It is good
because it is removed from Fedora 27 anyway. So removing last unused
function which calls it.
The removal of FF extension was not exactly clean so removing also
browserconfig.html which only purpose was to use the extension. Therefore
also related JS files are removed. This removal requires unauthorized.html
to be updated so that it doesn't point to non-existing page. And given that
it now points only to single config page, we can change link in UI login page
to this page (ssbrowser.html). While at it, improving buttons in ssbrowser.html.
Btw, commit 6c53765ac1 removed also generation of
krb.js. It had one perk - with that info ssbrowser.html could display real
Kerberos domain instead of only 'example.com'. I don't have time to revert this
change so removing traces of krb.js as well.
https://pagure.io/freeipa/issue/7135
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
In cases when IPA is installed in two steps (external CA), it's
necessary to check (in the second step) if Dir. Server is
running before continue with the installation. If it's not,
start Directory Server.
https://pagure.io/freeipa/issue/6611
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
- Add check for IPv6 stack to upgrade process
- Change IPv6 checker to also check that localhost resolves to ::1
Part of fixes https://pagure.io/freeipa/issue/7083
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
ipa-server-upgrade fails with Server-Cert not found, when trying to
track httpd/ldap server certificates. There are 2 issues in the upgrade:
- the certificates should be tracked only if they were issued by IPA CA
(it is possible to have CA configured but 3rd part certs)
- the certificate nickname can be different from Server-Cert
The fix provides methods to find the server crt nickname for http and ldap,
and a method to check if the server certs are issued by IPA and need to be
tracked by certmonger.
https://pagure.io/freeipa/issue/7141
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
The goal is to avoid using HTTP where possible and use TLS everywhere.
This provides not only privacy protection but also integrity protection.
We should consider any network except localhost as untrusted.
Switch from using urllib.request to dogtag.https_request.
https://pagure.io/freeipa/issue/7027
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
requests.packages contains but a weird backward compatibility fix
for its presumed urllib3 submodule but pylint does not approve.
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Refactor convertHashName() method to accept hash names prefixed with
HMAC- or any other prefix. Extending the method should be easier in
future.
Add tests proposed by Rob Crittenden to make sure we don't regress
with expected behavior of convertHashName().
Fixes https://pagure.io/freeipa/issue/7146
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When configuring a winsync replication agreement, the tool performs a search
on AD for defaultNamingContext. The entry contains the value as a bytes, it
needs to be decoded otherwise subsequent calls to
DN(WIN_USER_CONTAINER, self.ad_suffix) will fail.
https://pagure.io/freeipa/issue/7131
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This was causing issues when adding/removing a CA in the
CA plugin.
https://pagure.io/freeipa/issue/7131
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This is import to avoid problems when migrating from olders
versions of IPA and using idoverrideuser-* commands.
https://pagure.io/freeipa/issue/7074
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ldif.LDIFRecordList handles all attribute names as utf-8 strings
and all attribute values as bytes. If we take the attribute value
and try to search for it in the entry (= dictionary), if it contains
the attribute name as a key (which is a string), their hashes match.
However, even if hashes match, Python needs to make sure those two
are the same in case of a hash collision, so it tries to compare them.
This causes BytesWarning exception when running in strict mode
because `bytes` and `str` instances cannot be compared. KeyError
would be thrown in a non-strict mode.
Also, when later passing the attr to replace_value(), we need for it
to be `str` otherwise the modifications handler fails because it
tries to sort the attributes it's modifying but that's a bit less
poetic issue than the first one.
https://pagure.io/freeipa/issue/7129
Reviewed-By: Michal Reznik <mreznik@redhat.com>
If we issue pkinit-status after an upgrade from a pre-4.5 ipa
version, it would have failed with KeyError since the
pkinit_server_server of IPA config was never initialized.
https://pagure.io/freeipa/issue/7144
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When promoting a client to a replica we have to change sssd.conf,
deleting _srv_ part from 'ipa_server' property and setting
'ipa_server_mode' to true.
Previously, the wrong domain could be updated since the ipa_domain
variable was not being used properly.
https://pagure.io/freeipa/issue/7127
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
xmlserver.Command does not have to be called so don't.
Fixes pylint: not-callable error.
https://pagure.io/freeipa/issue/6874
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pylint is somehow confused about us importing custodia in
ipaserver.secrets.* modules, disable the check for these.
https://pagure.io/freeipa/issue/6874
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
unsupported-assignment-operation is useful at times, make it only
local, not global.
https://pagure.io/freeipa/issue/6874
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
sudocmd.get_dn() was trying to assign in an item of a tuple
which is not possible.
https://pagure.io/freeipa/issue/6874
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The consider-iterating-dictionary check disable never worked before
(notice the missing comma in pylintrc). Fix the rest of the dict
iteration.
https://pagure.io/freeipa/issue/6874
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Disable unbalanced-tuple-unpacking for RuntimeException thrown
by samba since this one should always contain two members.
https://pagure.io/freeipa/issue/6874
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
assess_dcerpc_exception was used in multiple places with a pre-step
which was rather common. Move this to one spot.
This also fixes pylint warning about unbalanced unpacking.
https://pagure.io/freeipa/issue/6874
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
commit bddb90f38a added the support for
multivalued server attributes (for pkinit_server_server), but this
introduced an API change where the setter and getter of ServerAttribute
are expecting list of values.
When a SingleValuedServerAttribute is used, we need to convert one elem
into a list containing this elem and vice-versa, so that the ipa config-mod
and ipa config_show APIs are not modified.
https://pagure.io/freeipa/issue/7120
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
For some unknown reason, when I wrote the ipa-otptoken-import script
I used bad input data which had the PBKDF2 parameters in the wrong
XML namespace. I have corrected this input data to match RFC 6030.
https://pagure.io/freeipa/issue/7035
Signed-off-by: Nathaniel McCallum <npmccallum@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
After commit cac3475, ipa-backup is broken due to circular
dependencies. This fixes it, removing circular dependency
of ipalib. The ipalib.constants.IPAAPI_USER is now passed
as parameter to the function that use it.
https://pagure.io/freeipa/issue/7108
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Since ipaapi user is now created during RPM install and not in runtime,
we may switch back to shipping tmpfiles.d configuration directly in RPMs
and not create it in runtime, which is a preferred way to handle drop-in
configuration anyway.
This also means that the drop-in config will be shipped in /usr/lib
instead of /etc according to Fedora packaging guidelines.
This partially reverts commit 38c66896de.
https://pagure.io/freeipa/issue/7053
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Timeout 120 seconds is quite long and it makes uninstallation too long
for. Given that this is non critical operation and may be executed
manually later, waiting 120 seconds is too much. Usually waiting longer
will not help at all to resolve missing record.
30 seconds is long enough 🕯
https://pagure.io/freeipa/issue/6176
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Fix certificate renewal scripts that use IPACertificate object:
- renew_ca_cert adds the C flag to the trust flags and needs to
be adapted to IPACertificate object
- ipa-cacert-manage: fix python3 encoding issue
https://pagure.io/freeipa/issue/7106
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
ipa-server-upgrade fails when running the ipaload_cacrt plugin. The plugin
finds all CA certificates in /etc/httpd/alias and uploads them in LDAP
below cn=certificates,cn=ipa,cn=etc,$BASEDN.
The issue happens because there is already an entry in LDAP for IPA CA, but
with a different DN. The nickname in /etc/httpd/alias can differ from
$DOMAIN IPA CA.
To avoid the issue:
1/ during upgrade, run a new plugin that removes duplicates and restarts ldap
(to make sure that uniqueness attr plugin is working after the new plugin)
2/ modify upload_cacert plugin so that it is using $DOMAIN IPA CA instead of
cn=$nickname,cn=ipa,cn=etc,$BASEDN when uploading IPA CA.
https://pagure.io/freeipa/issue/7125
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
cert-show returns a base64 encoded certificate yet the assumption
here was for a PEM bytes instance.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Felipe Volpone <fbarreto@redhat.com>
The schema RPC response can include a bytes value for the
'topic_topic' field (when the server is running in Python 2).
In this case, a Python 3 client fails to initialise the API
when a schema fetch is required, because it cannot serialise
the bytes values in the schema object to JSON.
Ensure the 'topic_topic' value is unicode.
Part of: https://pagure.io/freeipa/issue/4985
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
When uninstalling, if server does not have all roles, exception
is thrown as the role is not found. `member_principal` variable
has to be string here, otherwise we're using str on bytes.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Recent certificate refactoring left the system in a state where
the certificates are somewhere converted to DER format, somewhere
directly sent to ipaldap as IPACertificate objects. The latter
is the desirable way, make sure it's the one commonly used.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
