Remove NTP server role from config.py.
Remove uneccesary variables and replaced untrack_file with restore_file.
Update typo in manpages and messages printed while installing.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Removing ntpd configuration files and entry from LDAP.
Add parameter and rename method for restoring forced time
services. Addressing some requests for change too.
Remove unused path for chrony-helper.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This will change behaviour that FreeIPA server will be no more
ntpd server and time service is no longer part of FreeIPA topology.
As dependency for ntpd was completely removed, and there is only
dependency for chrony, FreeIPA will configure every host to
became chronyd service's clients.
FreeIPA have not supported --ntp-server option now it must to
support client configuration of chrony.
Configuration of chrony is moved to client-install therefore
NTP related options are now passed to the ipa-client-install
script method sync_time which now handles configuration of chrony.
Server installation has to configure chrony before handling
certificates so there is call to configure chrony outside of
using server's statestore and filestore.
Removed behavior that there is always --no-ntp option set.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Completely remove ipaserver/install/ntpinstance.py
This is no longer needed as chrony client configuration
is now handled in ipa-client-install.
Part of ipclient/install/client.py related to ntp configuration
has been refactored a bit to not lookup for srv records
and/or run chrony if not necessary.
Addresses: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The installer now checks that port 8080 is available and not in use by
any other application.
The port checker has been rewritten to use bind() rather than just
checking if a server responds on localhost. It's much more reliable and
detects more problems.
Original patch by m3gat0nn4ge.
Co-authored-by: Mega Tonnage <m3gat0nn4ge@gmail.com>
Fixes: https://pagure.io/freeipa/issue/7415
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a note in cainstance.configure_instance that "admin_password" is
the password to be used for the PKI admin account, NOT the IPA admin
password. In fact, it is set to the Directory Manager password.
This comment would have saved me some time during recent
investigation of a replica installation issue.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Commit aee0d2180c adds an upgrade step
that adds system crypto policy include to named.conf. This step
omitted the named.conf existence check; upgrade fails when it does
not exist. Add the existence check.
Also update the test to add the IPA-related part of the named.conf
config, because the "existence check" actually does more than just
check that the file exists - it also check that it contains the IPA
bind-dyndb-ldap configuration section.
Part of: https://pagure.io/freeipa/issue/4853
Reviewed-By: Christian Heimes <cheimes@redhat.com>
With the recent encryption of the HTTPD keys, it's also necessary
to count with this scenario during upgrade and create the password
for the HTTPD private key along the cert/key pair.
This commit also moves the HTTPD_PASSWD_FILE_FMT from ipalib.constants
to ipaplatform.paths as it proved to be too hard to be used that way.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Christian Heimes <cheimes@redhat.com>
For redundancy and security against catastrophic failure of a CA
master, there must be more than one CA master in a topology.
Replica installation is a good time to warn about this situation.
Print a warning at the end of ipa-replica-install, if there is only
one CA replica in the topology.
Fixes: https://pagure.io/freeipa/issue/7459
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Use temporary empty DIR-based ccache collection to prevent upgrade
failures in case KCM: or KEYRING: ccache type is used by default in
krb5.conf and is not available. We don't need any user credentials
during upgrade procedure but kadmin.local would attempt to resolve
default ccache and if that's not available, kadmin.local will fail.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1558818
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This commit adds configuration for HTTPD to encrypt/decrypt its
key which we currently store in clear on the disc.
A password-reading script is added for mod_ssl. This script is
extensible for the future use of directory server with the
expectation that key encryption/decription will be handled
similarly by its configuration.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-{server,kra}-install logs have been showing warnings about
deprecation of some Dogtag configuration options. Follow
the warnings' advice and rename these options to their newer
form.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
ipa user-find --whoami is used by ipa otptoken-add to populate
ipaTokenOwner and managedBy attributes. These attributes, in turn are
checked by the self-service ACI which allows to create OTP tokens
assigned to the creator.
With 389-ds-base 1.4.0.6-2.fc28 in Fedora 28 beta there is a bug in
searches with scope 'one' that result in ipa user-find --whoami
returning 0 results.
Because ipa user-find --whoami does not work, non-admin user cannot
create a token. This is a regression that can be fixed by using LDAP
Whoami command.
LDAP Whoami command returns a string 'dn: <DN of the bind>', so we have
to strip first four characters to get actual DN.
Fixes: https://pagure.io/freeipa/issue/7456
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
With e6c707b168 we changed httpd
configuration to use abstracted out variables in the template.
However, during upgrade we haven't resolved these variables so an
upgrade from pre-e6c707b168067ebb3705c21efc377acd29b23fff install will
fail.
Add all missing variables to the upgrade code.
Fixes https://pagure.io/freeipa/issue/7454
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
When non-admin user issues a command that utilizes
api.Object.config.show_servroles_attributes(), some server roles might
return errors.EmptyResult, indicating that a role is not visible to this
identity.
Most of the callers to api.Object.config.show_servroles_attributes() do
not process errors.EmptyResult so it goes up to an API caller. In case
of Web UI it breaks retrieval of the initial configuration due to ipa
config-show failing completely rather than avoiding to show available
server roles.
Fixes: https://pagure.io/freeipa/issue/7452
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
During ipa-replica-install, http installation first creates a service
principal for http/hostname (locally on the soon-to-be-replica), then
waits for this entry to be replicated on the master picked for the
install.
In a later step, the installer requests a certificate for HTTPd. The local
certmonger first tries the master defined in xmlrpc_uri (which is
pointing to the soon-to-be-replica), but fails because the service is not
up yet. Then certmonger tries to find a master by using the DNS and looking
for a ldap service. This step can pick a different master, where the
principal entry has not always be replicated yet.
As the certificate request adds the principal if it does not exist, we can
end by re-creating the principal and have a replication conflict.
The replication conflict later causes kerberos issues, preventing
from installing a new replica.
The proposed fix forces xmlrpc_uri to point to the same master as the one
picked for the installation, in order to make sure that the master already
contains the principal entry.
https://pagure.io/freeipa/issue/7041
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Configure the status request timeout, i.e. the connect/data timeout
on the HTTP request to get the status of Dogtag.
This configuration is needed in "multiple IP address" scenarios
where this server's hostname has multiple IP addresses but the HTTP
server is only listening on one of them. Without a timeout, if a
"wrong" IP address is tried first, it will take a long time to
timeout, exceeding the overall timeout hence the request will not be
re-tried. Setting a shorter timeout allows the request to be
re-tried.
Note that HSMs cause different behaviour so this value might not be
suitable for when we implement HSM support. It is known that a
value of 5s is too short in HSM environment.
This fix requires pki-core >= 10.6.0, which is already required by
the spec file.
Fixes: https://pagure.io/freeipa/issue/7425
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
DogtagInstance.backup_config uses shutil.copy to create a backup of the
config file. The function does not retain owner and group, so it creates a
backup as user and group root:root.
Closes: https://pagure.io/freeipa/issue/7426
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexey Slaykovsky <alexey@slaykovsky.com>
Installer now prints runtime of each step / part to install log.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
While trying to add idrange with untrusted domain name error
message is misleading.
Changing the error message to:
invalid 'ID Range setup':Specified trusted domain
name could not be found.
Resolves: https://pagure.io/freeipa/issue/5078
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
When ipa-restore is called, it needs to delete the file
nss.conf, otherwise httpd server will try to initialize
the NSS engine and access NSSCertificateDatabase.
This is a regression introduced with the switch from NSS
to SSL.
https://pagure.io/freeipa/issue/7440
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
ipa-server-install creates the kerberos container by calling
kdb5_util create -s -r $REALM -x ipa-setup-override-restrictions
but does not react on failure of this command. The installer fails later
when trying to create a ldap principal, and it is difficult to diagnose the
root cause.
The fix raises a RuntimeException when kdb5_util fails, to make sure
that the installer exits immediately with a proper error message.
Note: no test added because there is no easy reproducer. One would need to
stop dirsrv just before calling kdb5_util to simulate a failure.
https://pagure.io/freeipa/issue/7438
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
The previous default token key size would fail in FIPS mode for the sha384
and sha512 algorithms. With the updated key size, the default will work in
all cases.
https://pagure.io/freeipa/issue/7168
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The fix_trust_flags upgrade procedure pertains to the old Apache
mod_nss setup. With the move to mod_ssl, it now raises an
exception, so remove it.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
When ipa host-add --random is unable to add a reverse record (for instance
because the server does not manage any reverse zone), the command
adds the host but exits (return code=1) with an error without actually
outputing the random password generated.
With this fix, the behavior is modified. The commands succeeds (return code=0)
but prints a warning.
This commit also adds a unit test.
https://pagure.io/freeipa/issue/7374
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The disable system trust feature is no longer used.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
CertDB no longer makes any assumptions about the default db type of a NSS
DB. Instead it let's certutil decide when dbtype is set to 'auto'. This
makes it much easier to support F27 and F28 from a single code base.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
- Refactor CertDB to look up values from its NSSDatabase.
- Add run_modutil() helpers to support sql format. modutil does not
auto-detect the NSSDB format.
- Add migration helpers to CertDB.
- Add explicit DB format to NSSCertificateDatabase stanza
- Restore SELinux context when migrating NSSDB.
- Add some debugging and sanity checks to httpinstance.
The actual database format is still dbm. Certmonger on Fedora 27 does
neither auto-detect DB format nor support SQL out of the box.
https://pagure.io/freeipa/issue/7354
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Add storage='NSSDB' to various places. It makes it a bit easier to track
down NSSDB usage.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The import_ca_certs_{file,nssdb} methods were actually exporting
CA certificates from LDAP to different formats. The new names should
better reflect what these methods are actually doing.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fixes ipa-server-upgrade when upgrading from a pre-mod_ssl
version where the appropriate "Include" statement needs to
be added to ssl.conf settings so that WebUI functions properly.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Part of the mod_nss -> mod_ssl move. This patch allows loading
necessary certificates for Apache to function from PKCS#12 files.
This should fix CA-less and domain level 0 installations.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fix the upload_cacrt.py plugin to use the DS NSS database to
upload the CA certificate from (which is the original behavior).
This is possibly required for the upgrade path from some very
old IPA versions that did not use the certificates storage in
LDAP.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This is because if backed up it may contain IPA-specific entries
like an import of ipa-rewrite.conf that on uninstall won't exist
and this will keep Apache from restarting.
We already have a backup of nss.conf from pre-install. Stick with
that.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
