ipa-server-install with external CA fails to issue pkinit certs.
This happens because the installer calls
krb = krbinstance.KrbInstance(fstore)
then
krb.enable_ssl()
and in this code path self.config_pkinit is set to None, leading to a wrong
code path.
The fix initializes the required fields of the krbinstance before calling
krb.enable_ssl.
https://pagure.io/freeipa/issue/6921
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Abhijeet Kasurde <akasurde@redhat.com>
Refresh the ca_host property of the Dogtag's RestClient class when
it's requested as a context manager.
This solves the problem which would occur on DL0 when installing
CA which needs to perform a set of steps against itself accessing
8443 port. This port should however only be available locally so
trying to connect to remote master would fail. We need to make
sure the right CA host is accessed.
https://pagure.io/freeipa/issue/6878
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Http request performed in finalize_kerberos_acquisition doesn't use
CA certificate/certificate store with full certificate chain of IPA server.
So it might happen that in case that IPA is installed with externally signed
CA certificate, the call can fail because of certificate validation
and e.g. prevent session acquisition.
If it will fail for sure is not known - the use case was not discovered,
but it is faster and safer to fix preemptively.
https://pagure.io/freeipa/issue/6876
Reviewed-By: Martin Basti <mbasti@redhat.com>
There is some code duplication regarding setting ipaConfigString values
when:
* LDAP-enabling a service entry
* advertising enabled KDCProxy in LDAP
We can delegate the common work to a single re-usable function and thus
expose it to future use-cases (like PKINIT advertising).
https://pagure.io/freeipa/issue/6830
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
The server-side plugin for IPA Vault relied on the fact that the default
oid for encryption algorithm is 3DES in CBC mode (DES-EDE3-CBC). Dogtag
10.4 has changed the default from 3DES to AES. Pass the correct
algorithm OID to KeyClient.archive_encrypted_data().
Closes: https://pagure.io/freeipa/issue/6899
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
- Update get_attr_filter in LDAPSearch to handle nsaccountlock by setting the default value for
nsaccountlock to false as well as update the filter to check for the default value
- Remove pytest xfail for test_find_enabled_user
https://pagure.io/freeipa/issue/6896
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The compat plugin was causing deadlocks with the topology plugin. Move
its setup at the end of the installation and remove the
cn=topology,cn=ipa,cn=etc subtree from its scope.
https://pagure.io/freeipa/issue/6821
Reviewed-By: Martin Basti <mbasti@redhat.com>
During upgrade, the plugin update_tdo_gidnumber is launched in order to
add a gidnumber to the Trusted Domain Object.
This plugin should not be run when ad trust is not installed, otherwise an
error message is displayed.
https://pagure.io/freeipa/issue/6881
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Previous versions of FreeIPA add password to the ra.p12 file
contained in the password-protected tarball. This was forgotten
about in the recent changes and fixed now.
https://pagure.io/freeipa/issue/6878
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
When we're installing server with an external CA, the installation
would have failed in the second step where it's passed the required
CA cert file because it would have tried to perform the Kerberos
installation for the second time.
https://pagure.io/freeipa/issue/6757
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Rather than post-processing the results of each internal search,
post-process the combined result.
This avoids expensive per-certificate searches when cert-find is executed
with the --all option on certificates which won't even be included in the
combined result.
https://pagure.io/freeipa/issue/6808
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
CertDB would have always created a directory on initialization. This
behavior changes here by replacing the truncate argument with create
which will only create the database when really required.
https://pagure.io/freeipa/issue/6853
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
The exception handling of client install inside replica installation
was rather promiscuous, hungrily eating any possible exception thrown
at it. Scoped down the try-except block and reduced its promiscuity.
This change should improve the future development experience debugging
this part of the code.
https://pagure.io/freeipa/issue/6183
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
When installing client from inside replica installation on DL1,
it's possible that the client installation would fail and recommend
using --force-join option which is not available in replica installer.
Add the option there.
https://pagure.io/freeipa/issue/6183
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Don't check for no-pkinit option in case pkinit cert file was
provided. Setting no-pkinit is prohibited in this case, so without
this fix we have an impossible option-check if we want to provide
an own pkinit certificate and private key.
https://pagure.io/freeipa/issue/6807
Reviewed-By: Martin Basti <mbasti@redhat.com>
Slots in HSM are not assigned statically, we have to chose proper
slot from token label.
Softhsm i2.2.0 changed this behavior and now slots can change over
time (it is allowed by pkcs11 standard).
Changelog:
* created method get_slot() that returns slot number from
used label
* replaces usage of slot in __init__ method of P11_Helper
with label
* slot is dynamically detected from token label before
session is opened
* pkcs11-util --init-token now uses '--free' instead '--slot'
which uses first free slot (we don't care about slot numbers
anymore)
https://pagure.io/freeipa/issue/6692
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Previously system users needed by FreeIPA server services was created during
ipa-server-install. This led to problem when DBus policy was configured during
package installation but the user specified in the policy didn't exist yet
(and potentionally similar ones). Now the users will be created in package %pre
section so all users freeipa-server package needs exist before any installation
or configuration begins.
Another possibility would be using systemd-sysusers(8) for this purpose but
given that systemd is not available during container build the traditional
approach is superior.
Also dirsrv and pkiuser users are no longer created by FreeIPA instead it
depends on 389ds and dogtag to create those users.
https://pagure.io/freeipa/issue/6743
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Since introduction of privilege separation in IPA framework none of the
operations that require direct access to the framework's credentials can
be done. All authentication has to be performed with GSSAPI.
As result, we cannot obtain TGT for HTTP/.. principal with kinit
anymore, so it is better to re-route all types of trust to oddjobd
helper and get rid of casing out two-way trust.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1438366
Reviewed-By: Martin Basti <mbasti@redhat.com>
Samba error code reporting changes from version to version but we also
did not provide proper input into DCE RPC error processing method we
have.
Unify error processing and add few more fallback entries.
With Samba 4.7 we'll have to change it again because error code
processing for Samba Python modules will change with introduction of
samba.ntstatus and samba.werror modules.
Note that this commit also changes a message returned for error code
-1073741772 (NT_STATUS_OBJECT_NOT_FOUND) because it is more general one.
Fixes https://pagure.io/freeipa/issue/6859
Reviewed-By: Martin Basti <mbasti@redhat.com>
The certmonger renew agent and restart scripts use host keytab for
authentication. When they are executed during a certmonger request before
the host keytab is set up, the authentication will fail.
Make sure all certmonger requests in the installer are done after the host
keytab is set up.
https://pagure.io/freeipa/issue/6757
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
A different code path is used for DS and httpd certificate requests in
replica promotion. This is rather unnecessary and makes the certificate
request code not easy to follow.
Consolidate the non-promotion and promotion code paths into one.
https://pagure.io/freeipa/issue/6757
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
httpd is restarted by certmonger in the restart_httpd script after the
httpd certificate is saved if it was previously running. The restart will
fail because httpd is not properly configured at this point.
Stop httpd at the beginning of httpd install to avoid the restart.
https://pagure.io/freeipa/issue/6757
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
DS is restarted by certmonger in the restart_dirsrv script after the DS
certificate is saved. This breaks the ldap2 backend and makes any operation
fail with NetworkError until it is reconnected.
Reconnect ldap2 after the DS certificate request is finished to fix the
issue. Make sure restart_dirsrv waits for the ldapi socket so that the
reconnect does not fail.
https://pagure.io/freeipa/issue/6757
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
The trusted domain entries created in earlier versions are missing gidnumber.
During upgrade, a new plugin will read the gidnumber of the fallback group
cn=Default SMB Group and add this value to trusted domain entries which do
not have a gidNumber.
https://pagure.io/freeipa/issue/6827
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When idrange-add is called with --dom-name=, the CLI exits with
ipa: ERROR: an internal error has occurred
This happens because the code checks if the option is provided but does not
check if the value is None.
We need to handle empty dom-name as if the option was not specified.
https://pagure.io/freeipa/issue/6404
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The NSS database at /etc/httpd/alias is not properly initialized and backed
up in CA-less replica promotion. This might cause the install to fail after
previous install and uninstall.
Make sure the NSS database is initialized and backed up even in CA-less
replica promotion to fix the issue.
https://pagure.io/freeipa/issue/4639
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
During CA-less installation, we initialize the HTTPD alias
database from a pkcs12 file. This means there's going to
be different nicknames to the added certificates. Store
the CA certificate nickname in HTTPInstance__setup_ssl()
to be able to correctly export it later.
https://pagure.io/freeipa/issue/6806
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
To create a wheel bundle with ipaserver and its dependencies:
make wheel_bundle IPA_SERVER_WHEELS=1
To include additional dependencies:
make wheel_bundle IPA_EXTRA_WHEELS=ipatests[webui]
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
ipaserver did not have extra_requires to state additional dependencies.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The pyhbac module is part of SSSD. It's not available as stand-alone
PyPI package. It would take a lot of effort to package it because the
code is deeply tight into SSSD.
Let's follow the example of other SSSD Python packages and make the
import of pyhbac conditionally. It's only necessary for caacl and
hbactest plugins.
I renamed convert_to_ipa_rule() to _convert_to_ipa_rule() because it
does not check for presence of pyhbac package itself. The check is
performed earlier in execute(). The prefix indicates that it is an
internal function and developers have to think twice before using it
in another place.
This makes it much easier to install ipaserver with instrumented build
of Python with a different ABI or in isolated virtual envs to profile
and debug the server.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
- Allows an admin to easily force a user to expire their password forcing the user to change it immediately or at a specified time in the future
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
There was a redundant check for CA-less install certificate files
for replicas but the same check is done for all installers before
that.
https://pagure.io/freeipa/issue/6801
Reviewed-By: Martin Basti <mbasti@redhat.com>
Without this patch, if either of dirsrv_cert_files, http_cert_files
or pkinit_cert_files is set along with no-pkinit, the user is first
requested to add the remaining options and when they do that,
they are told that they are using 'no-pkinit' along with
'pkinit-cert-file'.
https://pagure.io/freeipa/issue/6801
Reviewed-By: Martin Basti <mbasti@redhat.com>
Since krbinstance code can now handle all operations of the
`enabled_anonymous_principal` function from upgrade we can remove
extraneous function altogether.
https://pagure.io/freeipa/issue/6799
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The anonymous principal will now be checked for presence and created on
both server and replica install. This fixes errors caused during replica
installation against older master that do not have anonymous principal
present.
https://pagure.io/freeipa/issue/6799
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
