AES-128-CBC was recently enabled as default wrapping algorithm for transport of secrets.
This change was done in favor of FIPS as crypto-policies disabled 3DES in RHEL9, but
setting AES as default ended-up breaking backwards compatibility with older RHEL systems.
This commit is tuning some defaults so that interoperability with older RHEL systems
works again. The new logic reflects:
- when an old client is calling a new server, it doesn't send any value for wrapping_algo
and the old value is used (3DES), so that the client can decrypt using 3DES.
- when a new client is calling a new server, it sends wrapping_algo = AES128_CBC
- when a new client is calling an old server, it doesn't send any value and the default is
to use 3DES.
Finally, as this logic is able to handle overlapping wrapping algorithm between server and
client, the Option "--wrapping-algo" is hidden from "ipa vault-archive --help" and "ipa
vault-retrieve --help" commands.
Fixes: https://pagure.io/freeipa/issue/9259
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The API and VERSION files need to be updated
to hold the changes made in the 'idnssoaserial'
parameter.
Fixes: https://pagure.io/freeipa/issue/9249
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Add support for bind grace limiting per
https://datatracker.ietf.org/doc/html/draft-behera-ldap-password-policy-06
389-ds provides for alternative naming than the draft, using those
instead: passwordGraceUserTime for pwdGraceUserTime and
passwordGraceLimit for pwdGraceLoginLimit.
passwordGraceLimit is a policy variable that an administrator
sets to determine the maximum number of LDAP binds allowed when
a password is marked as expired. This is suported for both the
global and per-group password policies.
passwordGraceUserTime is a count per-user of the number of binds.
When the passwordGraceUserTime exceeds the passwordGraceLimit then
all subsequent binds will be denied and an administrator will need
to reset the user password.
If passwordGraceLimit is less than 0 then grace limiting is disabled
and unlimited binds are allowed.
Grace login limitations only apply to entries with the objectclass
posixAccount or simplesecurityobject in order to limit this to
IPA users and system accounts.
Some basic support for the LDAP ppolicy control is enabled such that
if the ppolicy control is in the bind request then the number of
remaining grace binds will be returned with the request.
The passwordGraceUserTime attribute is reset to 0 upon a password
reset.
user-status has been extended to display the number of grace binds
which is stored centrally and not per-server.
Note that passwordGraceUserTime is an operational attribute.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The vault plugin has used TripleDES (des-ede3-cbc) as default wrapping
algorithm since the plugin was introduced. Allow use of AES-128-CBC as
alternative wrapping algorithm for transport of secrets.
Fixes: https://pagure.io/freeipa/issue/6524
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add new options to ipa config-mod, allowing to enable
SID generation on upgraded servers:
ipa config-mod --enable-sid --add-sids --netbios-name NAME
The new option uses Dbus to launch an oddjob command,
org.freeipa.server.config-enable-sid
that runs the installation steps related to SID generation.
--add-sids is optional and triggers the sid generation task that
populates SID for existing users / groups.
--netbios-name is optional and allows to specify the NetBIOS Name.
When not provided, the NetBIOS name is generated based on the leading
component of the DNS domain name.
This command can be run multiple times.
Fixes: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
I don't know why this wasn't always multi-value but if one wanted
to set multiple options they needed to call add-option multiple
times. The LDAP attribute is already multi-value.
This shouldn't cause API issues as it understood the attribute as
multi-value just didn't expose it. Client output on the CLI will
look a bit different:
Added option "('one', 'two')" to Sudo Rule "test"
or
Added option "(u'one', u'Two')" to Sudo Rule "test"
instead of with this change:
Added option "one,two" to Sudo Rule "test"
Removing an option works in a similar way.
The value is normalized on the client side in order to ensure that
the option value is always a tuple.
https://pagure.io/freeipa/issue/2278
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
New LDAP object class "ipaUserSubordinate" with four new fields:
- ipasubuidnumber / ipasubuidcount
- ipasubgidnumber / ipasgbuidcount
New self-service permission to add subids.
New command user-auto-subid to auto-assign subid
The code hard-codes counts to 65536, sets subgid equal to subuid, and
does not allow removal of subids. There is also a hack that emulates a
DNA plugin with step interval 65536 for testing.
Work around problem with older SSSD clients that fail with unknown
idrange type "ipa-local-subid", see: https://github.com/SSSD/sssd/issues/5571
Related: https://pagure.io/freeipa/issue/8361
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This can be used to narrow the candidate list of
certificates when deleting objects like hosts and
service.
Related: https://pagure.io/freeipa/issue/7835
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Add a new option --auto-private-groups to the command
ipa idrange-add / ipa idrange-mod.
The option can take true/false/hybrid values.
Fixes: https://pagure.io/freeipa/issue/8807
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Second part of adding support to manage IPA as a user from a trusted
Active Directory forest.
Treat user ID overrides as members of groups and roles.
For example, adding an Active Directory user ID override as a member of
'admins' group would make it equivalent to built-in FreeIPA 'admin'
user.
We already support self-service operations by Active Directory users if
their user ID override does exist. When Active Directory user
authenticates with GSSAPI against the FreeIPA LDAP server, its Kerberos
principal is automatically mapped to the user's ID override in the
Default Trust View. LDAP server's access control plugin uses membership
information of the corresponding LDAP entry to decide how access can be
allowed.
With the change, users from trusted Active Directory forests can
manage FreeIPA resources if the groups are part of appropriate roles or
their ID overrides are members of the roles themselves.
Fixes: https://pagure.io/freeipa/issue/7255
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Make it possible to create a managed permission with
ipapermbindruletype="self". The ACI will have bind rule
'(userdn = "ldap:///self")'.
Example
-------
Allow users to modify their own fasTimezone and fasIRCNick attributes:
```
managed_permissions = {
"System: Self-Modify FAS user attributes": {
"ipapermright": {"write"},
"ipapermtargetfilter": ["(objectclass=fasuser)"],
"ipapermbindruletype": "self",
"ipapermdefaultattr": ["fasTimezone", "fasIRCNick"],
}
}
```
See: https://github.com/fedora-infra/freeipa-fas/pull/107
Fixes: https://pagure.io/freeipa/issue/8348
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
RN: host groups can now be renamed with IPA CLI:
RN: 'ipa hostgroup-mod group-name --rename new-name'.
RN: Protected hostgroups ('ipaservers') cannot be renamed.
Fixes: https://pagure.io/freeipa/issue/6783
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When ipa-adtrust-install is run, the tool detects masters that are
not enabled as trust agents and propose to configure them. With the
current code, the Schema Compat plugin is not enabled on these new
trust agents and a manual restart of LDAP server + SSSD is required.
With this commit, ipa-adtrust-install now calls remote code on the new
agents through JSON RPC api, in order to configure the missing parts.
On the remote agent, the command is using DBus and oddjob to launch
a new command,
/usr/libexec/ipa/oddjob/org.freeipa.server.trust-enable-agent [--enable-compat]
This command configures the Schema Compat plugin if --enable-compat is
provided, then restarts LDAP server and SSSD.
If the remote agent is an older version and does not support remote
enablement, or if the remote server is not responding, the tool
ipa-adtrust-install prints a WARNING explaining the steps that need
to be manually executed in order to complete the installation, and
exits successfully (keeping the current behavior).
Fixes: https://pagure.io/freeipa/issue/7600
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
A group membership manager is a user or a group that can add members to
a group or remove members from a group or host group.
Fixes: https://pagure.io/freeipa/issue/8114
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
As new authentication indicators implemented, we also modified server
API to support those new values. Also, "krbprincipalauthind" attribute
is modified to use a pre-defined set of values instead of arbitrary
strings.
Resolves: https://pagure.io/freeipa/issue/8001
Signed-off-by: Changmin Teng <cteng@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
SMB service has a number of predefined properties that must be set at a
creation time. Thus, we provide a special command that handles all the
needed changes. In addition, since SMB principal name is predefined, it
is generated automatically based on the machine hostname.
Since we generate the service's object primary key, its argument/option
should be removed from the list of the command's arguments and options.
We also remove those options that make no sense in the context of SMB
service.
Most controversial would probably be a lack of the authentication
indicator that could be associated with the service. However, this is
intended: SMB service on the domain member is used by both humans and
other SMB services in the domain. Thus, it is not possible to require a
specific authentication indicator to be present: automated acquisition
of the credentials by a domain controller or other domain member machine
accounts is based on a single factor creds and cannot be changed.
Access to SMB service should be regulated on the SMB protocol level,
with access controls in share ACLs.
Fixes: https://pagure.io/freeipa/issue/3999
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
rpm sorts pre1 release after dev releases. To have dev releases override
pre releases in upstream, the patch level must be bumped after every pre
release.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
On Linux systems the length limit for hostnames is hardcoded
at 64 in MAXHOSTNAMELEN
Solaris, for example, allows 255 characters, and DNS allows the
total length to be up to 255 (with each label < 64).
Add a knob to allow configuring the maximum hostname length (FQDN)
The same validators are used between hosts and DNS to apply
the knob only when dealing with a FQDN as a hostname.
The maxlen option is included so installers can limit the length
of allowed hostnames when the --hostname option is used.
https://pagure.io/freeipa/issue/2018
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Refactor com.redhat.idm.trust-fetch.domains oddjob helper to allow
passing administrative credentials and a domain controller to talk to.
This approach allows to avoid rediscovering a domain controller in case
a user actually specified the domain controller when establishing trust.
It also allows to pass through admin credentials if user decides to do
so. The latter will be used later to allow updating trust topology in a
similar oddjob helper.
Resolves: https://pagure.io/freeipa/issue/7895
Reviewed-By: Christian Heimes <cheimes@redhat.com>
If groups or hostgroups have been removed after automember rules have been
created using them, then automember-rebuild, automember-add, host-add and
more commands could fail.
A new command has been added to the ipa tool:
ipa automember-find-orphans --type={hostgroup,group} [--remove]
This command retuns the list of orphan automember rules in the same way as
automember-find. With the --remove option the orphan rules are also removed.
The IPA API version has been increased and a test case has been added.
Using ideas from a patch by: Rob Crittenden <rcritten@redhat.com>
See: https://pagure.io/freeipa/issue/6476
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Fast linting only needs modified files with pylint and diff with
pycodestyle. It's good enough to detect most code errors very fast. It
typically takes less than 10 seconds. A complete full pylint run uses
all CPU cores for several minutes. PEP 8 violations are typically
reported after 30 minutes to several hours on Travis CI.
Fast lintings uses git diff and git merge-base to find all modified
files in a branch or working tree. There is no easy way to find the
branch source. On Travis the information is provided by Travis. For
local development it's a new variable IPA_GIT_BRANCH in VERSION.m4.
Fast testing execute all unit tests that do not depend on ipalib.api.
In total it takes about 30-40 seconds (!) to execute linting, PEP 8 checks
and unittests for both Python 2 and 3.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Up until now, Bytes parameter was used for certificate parameters
throughout the framework. However, the Bytes parameter does nothing
special for certificates, like validation, so this had to be done
for each of the parameters which were supposed to represent a
certificate.
This commit introduces a special Certificate parameter which takes
care of certificate validation so this does not have to be done
separately. It also makes sure that the certificates represented by
this parameter are always converted to DER format so that we can work
with them in a unified manner throughout the framework.
This commit also makes it possible to pass bytes directly during
instantiation of the Certificate parameter and they are still
represented correctly after their conversion in the _convert_scalar()
method.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
There are two ways for maintaining user principal names (UPNs) in Active
Directory:
- associate UPN suffixes with the forest root and then allow for each
user account to choose UPN suffix for logon
- directly modify userPrincipalName attribute in LDAP
Both approaches lead to the same result: AD DC accepts user@UPN-Suffix
as a proper principal in AS-REQ and TGS-REQ.
The latter (directly modify userPrincipalName) case has a consequence
that this UPN suffix is not visible via netr_DsRGetForestTrustInformation
DCE RPC call. As result, FreeIPA KDC will not know that a particular UPN
suffix does belong to a trusted Active Directory forest. As result, SSSD
will not be able to authenticate and validate this user from a trusted
Active Directory forest.
This is especially true for one-word UPNs which otherwise wouldn't work
properly on Kerberos level for both FreeIPA and Active Directory.
Administrators are responsible for amending the list of UPNs associated
with the forest in this case. With this commit, an option is added to
'ipa trust-mod' that allows specifying arbitrary UPN suffixes to a
trusted forest root.
As with all '-mod' commands, the change replaces existing UPNs when
applied, so administrators are responsible to specify all of them:
ipa trust-mod ad.test --upn-suffixes={existing.upn,another_upn,new}
Fixes: https://pagure.io/freeipa/issue/7015
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
This command is a more streamlined reporting tool for PKINIT feature
status in the FreeIPA topology. It prints out whether PKINIT is enabled
or disabled on individual masters in a topology. If a`--server` is
specified, it reports status for an individual server. If `--status` is
specified, it searches for all servers that have PKINIT enabled or
disabled.
https://pagure.io/freeipa/issue/6937
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Ever since from v4.5, FreeIPA expects at least some kind of
anonymous PKINIT to work. The pkinit-anonymous command was supposed
to enable/disable anonymous pkinit by locking/unlocking the
anonymous principal. We can't allow this for FreeIPA to work
so we are removing the command as it was never supported anyway.
https://pagure.io/freeipa/issue/6936
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
- Allows an admin to easily force a user to expire their password forcing the user to change it immediately or at a specified time in the future
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The recent changes allow the sudorule objects to be renamed.
https://pagure.io/freeipa/issue/2466
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
The recent changes allow HBAC rule objects to be renamed.
https://pagure.io/freeipa/issue/6784
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
`idview-add` and `idview-mod` can now set and validate the attribute.
The required objectclass is added on-demand after modification
https://pagure.io/freeipa/issue/6372
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
optional attribute was added to config object along with validator that
check for valid domain names and also checks whether the specified
domains exist in FreeIPA or in trusted forests and, in case of trusted
domains, are not disabled.
Part of http://www.freeipa.org/page/V4/AD_User_Short_Nameshttps://pagure.io/freeipa/issue/6372
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Include the full certificate chain in the output of cert-request, cert-show
and cert-find if --chain or --all is specified.
If output file is specified in the CLI together with --chain, the full
certificate chain is written to the file.
https://pagure.io/freeipa/issue/6547
Reviewed-By: David Kupka <dkupka@redhat.com>
Whoami command allows to query details about currently
authenticated identity. The command returns following information:
* object class name
* function to call to get actual details about the object
* arguments to pass to the function
There are five types of objects that could bind to IPA using their
credentials. `ipa whoami` call expects one of the following:
* users
* staged users
* hosts
* Kerberos services
* ID user override from the default trust view
The latter category of objects is automatically mapped by SASL GSSAPI
mapping rule in 389-ds for users from trusted Active Directory forests.
The command is expected to be used by Web UI to define proper view for
the authenticated identity. It is not visible in the command line
interface is `ipa` command.
Below is an example of how communication looks like for a host
principal:
# kinit -k
# ipa console
(Custom IPA interactive Python console)
>>> api.Command.whoami()
{u'command': u'host_show/1', u'object': u'host', u'arguments': (u'ipa.example.com',)}
>>>
Fixes https://pagure.io/freeipa/issue/6643
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
