The LDAP cache log is rather chatty and a bit overwhelming when
looking for error messages. Disable it by default but allow it
to be enabled when a new config option, ldap_cache_debug, is
enabled.
Fixes: https://pagure.io/freeipa/issue/9180
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
These pre-existed in ipaserver/install/replication.py.
The constants were only originally used in ldapupdate.py
but have subsequently been switched to the replication.py
versions so they are not used anywhere in the code.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This commit sets AES-128-CBC as default wrapping algorithm as
TripleDES (des-ede3-cbc) is not supported anymore in C9S.
Fixes: https://pagure.io/freeipa/issue/6524
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The vault plugin has used TripleDES (des-ede3-cbc) as default wrapping
algorithm since the plugin was introduced. Allow use of AES-128-CBC as
alternative wrapping algorithm for transport of secrets.
Fixes: https://pagure.io/freeipa/issue/6524
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The API schema is not checked for changes until after a TTL
is expired. A one-hour TTL was hardcoded which makes development
tedious because the only way to force a schema update is to
remember to remove files between invocations.
This adds a new environment variable, schema_ttl, to configure
the TTL returned by the server to schema() calls. This can be
set low to ensure a frequent refresh during development.
If the client is in compat mode, that is if client is working
against a server that doesn't support the schema() command,
then use the client's schema_ttl instead so that the user still
has control.
Re-check validity before writing the cache. This saves us both
a disk write and the possibility of updating the expiration
with a ttl of 0. This can happen if the fingerprint is still
valid (not expired, no language change) the schema check is
skipped so we have no server-provided ttl.
https://pagure.io/freeipa/issue/8492
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The interactive server installation now prompts for netbios
name confirmation.
Add expected prompt and send response to the installer.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
KRA instance import depends on lib389 package, which is not always
installed and that results in failure. Furthermore, test_installation
utilizes krainstance import. This fix moves relevant parts from
krainstance to ipalib constants where those are subsequently imported
from.
Related: https://pagure.io/freeipa/issue/8795
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Subordinate ids are now handled by a new plugin class and stored in
separate entries in the cn=subids,cn=accounts subtree.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
New LDAP object class "ipaUserSubordinate" with four new fields:
- ipasubuidnumber / ipasubuidcount
- ipasubgidnumber / ipasgbuidcount
New self-service permission to add subids.
New command user-auto-subid to auto-assign subid
The code hard-codes counts to 65536, sets subgid equal to subuid, and
does not allow removal of subids. There is also a hack that emulates a
DNA plugin with step interval 65536 for testing.
Work around problem with older SSSD clients that fail with unknown
idrange type "ipa-local-subid", see: https://github.com/SSSD/sssd/issues/5571
Related: https://pagure.io/freeipa/issue/8361
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Insert a class before LDAPClient to cache the return value
of get_entry() and certain exceptions (NotFound and
EmptyResult). The cache uses an OrderedDict for the cases
where a large cache might result an LRU model can be used.
The cache be enabled (default) or disabled using
ldap_cache=True/False.
This cache is per-request so is not expected to grow
particularly large except in the case of a large batch
command.
The key to the cache entry is the dn of the object
being requested.
Any write to or referencing a cached dn is evicted from
the cache.
The set of attributes is somewhat taken into consideration.
"*" does not always match everything being asked for by
a plugin so unless the requested set of attributes is a
direct subset of what is cached it will be re-fetched. Err
on the side of safety.
Despite this rather conserative approach to caching 29%
of queries are saved with ipatests/xmlrpc_tests/*
https://pagure.io/freeipa/issue/8798
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
ipa_gethostfqdn() now returns a pointer to a statically allocated buffer
or NULL in case of an error. The caller no longer has to supply a
correctly allocated buffer.
Rename IPA_HOST_HOST to_LEN IPA_HOST_FQDN_LEN and use IPA_HOST_FQDN_LEN
wherever code copies a hostname supplied from ipa_gethostfqdn().
Clarify that MAXHOSTNAMELEN and MAXHOSTFQDNLEN are different things.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
FreeIPA's Python and C code used different approaches to get the FQDN of
the host. Some places assumed that gethostname() returns a FQDN. Other
code paths used glibc's resolver to resolve the current node name to a
FQDN.
Python code now uses the ipalib.constants.FQDN where a fully qualified
domain name is expected. The variable is initialized only once and avoids
potential DNS lookups.
C code uses a new helper function ipa_gethostfqdn() in util package. The
function implements similar logic as gethostfqdn() except it uses more
modern getaddrinfo(). The result is cached as well.
Fixes: https://pagure.io/freeipa/issue/8501
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
New classes for user and group names provide a convenient way to access
the uid and primary gid of a user / gid of a group. The classes also
provide chown() and chgrp() methods to simplify common operations.
The wrappers are subclasses of builtin str type and behave like ordinary
strings with additional features. The pwd and grp structs are retrieved
once and then cached.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Commit 49cf5ec64b fixed a bug that
prevented migration from externally-signed to self-signed IPA CA.
But it introduced a subtle new issue: certmonger-initiated renewal
renews an externally-signed IPA CA as a self-signed CA.
To resolve this issue, introduce the `--force-self-signed' flag for
the dogtag-ipa-ca-renew-agent script. Add another certmonger CA
definition that calls this script with the `--force-self-signed'
flag. Update dogtag-ipa-ca-renew-agent to only issue a self-signed
CA certificate if the existing certificate is self-signed or if
`--force-self-signed' was given. Update `ipa-cacert-manage renew'
to supply `--force-self-signed' when appropriate.
As a result of these changes, certmonger-initiated renewal of an
externally-signed IPA CA certificate will not issue a self-signed
certificate.
Fixes: https://pagure.io/freeipa/issue/8176
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Client connections no longer override TLS version range and ciphers by
default. Instead clients use the default settings from the system's
crypto policy.
Minimum TLS version is now TLS 1.2. The default crypto policy on
RHEL 8 sets TLS 1.2 as minimum version, while Fedora 31 sets TLS 1.0 as
minimum version. The minimum version is configured with OpenSSL 1.1.1
APIs. Python 3.6 lacks the setters to override the system policy.
The effective minimum version is always TLS 1.2, because FreeIPA
reconfigures Apache HTTPd on Fedora.
Fixes: https://pagure.io/freeipa/issue/8125
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
urllib3 now supports post-handshake authentication with TLS 1.3. Enable
TLS 1.3 support for Apache HTTPd.
The update depends on bug fixes for TLS 1.3 PHA support in urllib3 and
Apache HTTPd. New builds are available in freeipa-master COPR and in
F30/F31.
Overwrite crypto-policy on Fedora only. Fedora 31 and earlier have TLS
1.0 and 1.1 still enabled by default.
Fixes: https://pagure.io/freeipa/issue/8125
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
The variable is intended to control the timeout for replication
events. If someone had significantly reduced it via configuration
then it could have caused certmogner requests to fail due to timeouts.
Add replication_wait_timeout, certmonger_wait_timeout and
http_timeout to the default.conf man page.
Related: https://pagure.io/freeipa/issue/7971
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Currently, RA agent certificate is issued using caServerCert profile.
This has unfortunate side effect of asserting id-pk-serverAuth EKU which
is not really needed for RA agent. If IPA CA certificate adds SAN DNS
constraints into issued certificates, presence of id-pk-serverAuth EKU
forces NSS (and other crypto libraries) to validate CN value with
regards to SAN DNS constraints, due to historical use of CN bearing DNS
name.
Since RA agent certificate has 'CN=IPA RA', it is guaranteed to fail
the check.
Default IPA CA configuration does *not* add SAN DNS constraints into RA
agent certificate. However, it is better to be prepared to such
behavior.
Related: https://bugzilla.redhat.com/1670239
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Profile-based renewal means we should always explicitly specify the
profile in tracking requests that use the dogtag-ipa-ca-renew-agent
renewal helper. This includes the IPA RA agent certificate. Update
CAInstance.configure_agent_renewal() to add the profile to the
tracking request. This also covers the upgrade scenario (because
the same method gets invoked).
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
TLS 1.3 is causing some trouble with client cert authentication.
Conditional client cert authentication requires post-handshake
authentication extension on TLS 1.3. The new feature is not fully
implemented yet.
TLS 1.0 and 1.1 are no longer state of the art and now disabled by
default.
TLS 1.2 works everywhere and supports PFS.
Related: https://pagure.io/freeipa/issue/7667
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
On Linux systems the length limit for hostnames is hardcoded
at 64 in MAXHOSTNAMELEN
Solaris, for example, allows 255 characters, and DNS allows the
total length to be up to 255 (with each label < 64).
Add a knob to allow configuring the maximum hostname length (FQDN)
The same validators are used between hosts and DNS to apply
the knob only when dealing with a FQDN as a hostname.
The maxlen option is included so installers can limit the length
of allowed hostnames when the --hostname option is used.
https://pagure.io/freeipa/issue/2018
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This reverts commit 3509545897.
We cannot force increase in minimum SASL security factor until our
consumers are ready to deal with it. Unfortunately, realmd uses
anonymous connection for discovery and validation of IPA LDAP server.
The way it is done is fragile (it doesn't take into account an
advertised IPA version, only checks that 'IPA' string exists in the info
field) but since bumping of minimum SSF prevents reading IPA info field
using anonymous connection, client enrollment fails.
We should get back to bumping minimum SSF after realmd and other
potential consumers are fixed.
Reviewed-By: François Cami <fcami@redhat.com>
man(5) default.conf says that startup_timeout has a default value of 120
seconds. Even 120 seconds are not effective unless systemd is also
reconfigured to have a larger DefaultTimeoutStartSec.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
SSF_MINX 56 level ensures data integrity and confidentiality for SASL
GSSAPI and SASL GSS SPNEGO connections.
Although at least AES128 is enforced pretty much everywhere, 56 is required
for backwards compatibility with systems that announce wrong SSF.
Related: https://pagure.io/freeipa/issue/7140
Related: https://pagure.io/freeipa/issue/4580
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
The HOME directory may not be available in containers. It's also the
wrong variable on some platforms. Use os.path.expanduser() instead of
HOME.
Fixes: https://pagure.io/freeipa/issue/7837
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
With increasing the minimal domain level to 1 ipa-replica-install will
refuse to install if the domain has domain level 0.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Update regular expression validator to prevent user and group creation.
Fixes: https://pagure.io/freeipa/issue/7572
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instead of multiple timeout values all over the code base, all
replication waits now use a common timeout value from api.env of 5
minutes. Waiting for HTTP/replica principal takes 90 to 120 seconds, so
5 minutes seem like a sufficient value for slow setups.
Fixes: https://pagure.io/freeipa/issue/7595
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
mod_ssl's limiting of client cert verification depth was causing
the replica installs to fail when master had been installed with
external CA since the SSLCACertificateFile was pointing to a file
with more than one certificate. This is caused by the default
SSLVerifyDepth value of 1. We set it to 5 as that should be
just about enough even for possible sub-CAs.
https://pagure.io/freeipa/issue/7530
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
With the recent encryption of the HTTPD keys, it's also necessary
to count with this scenario during upgrade and create the password
for the HTTPD private key along the cert/key pair.
This commit also moves the HTTPD_PASSWD_FILE_FMT from ipalib.constants
to ipaplatform.paths as it proved to be too hard to be used that way.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This commit adds configuration for HTTPD to encrypt/decrypt its
key which we currently store in clear on the disc.
A password-reading script is added for mod_ssl. This script is
extensible for the future use of directory server with the
expectation that key encryption/decription will be handled
similarly by its configuration.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Describing the parameter kinit_lifetime that allows to limit the lifetime of ticket obtained by users authenticating to the WebGUI using login/password. Removing session_auth_duration and session_duration_type since these parameters are not relevant anymore.
Resolves: https://pagure.io/freeipa/issue/7333
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When running on memory-constrained systems, the `ipa-server-install`
program often fails during the "Configuring certificate server
(pki-tomcatd)" stage in FreeIPA 4.5 and 4.6.
The memory-intensive dogtag service causes swapping on low-memory
systems right after start-up, and especially new certificate
operations requested via certmonger can exceed the dbus client default
25 second timeout.
This patch changes dbus client timeouts for some such operations to
120 seconds (from the default 25 seconds, IIRC).
See more discussion in FreeIPA PR #1078 [1] and FreeIPA container
issue #157 [2]. Upstream ticket at [3].
[1]: https://github.com/freeipa/freeipa/pull/1078
[2]: https://github.com/freeipa/freeipa-container/issues/157
[3]: https://pagure.io/freeipa/issue/7213
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Derive the default value of `xmlrpc_uri` and `ldap_uri` from `server`.
Derive the default value of `basedn` from `domain`.
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Domain, realm, basedn, xmlrpc_uri, ldap_uri do not have any reasonable default.
This patch removes hardcoded default so the so the code which depends
on these values blows up early and does not do crazy stuff
with default values instead of real ones.
This should help to uncover issues caused by improper ipalib
initialization.
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This is done by setting the kinit_lifetime option in default.conf
to a value that can be passed in with the -l option syntax of kinit.
https://pagure.io/freeipa/issue/7001
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Pavel Vomacka <pvomacka@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
CA sometimes "forgot to answer" so we have to add timeout for http
connection and ask again rather than wait for infinity.
https://pagure.io/freeipa/issue/6766
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Slots in HSM are not assigned statically, we have to chose proper
slot from token label.
Softhsm i2.2.0 changed this behavior and now slots can change over
time (it is allowed by pkcs11 standard).
Changelog:
* created method get_slot() that returns slot number from
used label
* replaces usage of slot in __init__ method of P11_Helper
with label
* slot is dynamically detected from token label before
session is opened
* pkcs11-util --init-token now uses '--free' instead '--slot'
which uses first free slot (we don't care about slot numbers
anymore)
https://pagure.io/freeipa/issue/6692
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Cache the KRA transport certificate on disk (in ~/.cache/ipa) as well as
in memory.
https://fedorahosted.org/freeipa/ticket/6652
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
NSSConnection was causing a lot of trouble in the past and there is
a lot of logic around it just to make it not fail. What's more,
when using NSS to create an SSL connection in FIPS mode, NSS
always requires database password which makes the `ipa` command
totally unusable.
NSSConnection is therefore replaced with Python's
httplib.HTTPSConnection which is OpenSSL based.
The HTTPSConnection is set up to handle authentication with client
certificate for connections to Dogtag server as RA agent. It allows
to handle client cert/private key in separate files and also
encrypted private key files.
https://fedorahosted.org/freeipa/ticket/5695
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
It was possible to set tls_version_min/max to 'ssl2' or 'ssl3',
even though newer versions of NSS will fail to set this as a valid
TLS version. This patch explicitly checks for deprecated TLS versions
prior to creating a TLS connection.
Also, we don't allow tls_version_min/max to be set to a random
string anymore.
https://fedorahosted.org/freeipa/ticket/6607
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Add the apache user the ipawebui group.
Make the ccaches directory owned by the ipawebui group and make
mod_auth_gssapi write the ccache files as r/w by the apache user and
the ipawebui group.
Fix tmpfiles creation ownership and permissions to allow the user to
access ccaches files.
The webui framework now works as a separate user than apache, so the certs
used to access the dogtag instance need to be usable by this new user as well.
Both apache and the webui user are in the ipawebui group, so use that.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
