1. Test to prune the expired certificate by manual run
2. Test to prune expired certificate by cron job
3. Test to prune expired certificate with retention unit option
4. Test to prune expired certificate with search size limit option
5. Test to check config-show command shows set param
6. Test prune command shows proper status after disabling the pruning
related: https://pagure.io/freeipa/issue/9294
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Added test for aduser with GSSAPI authentication.
Related : https://pagure.io/freeipa/issue/9316
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Renewal causes two certs to have the same nickname. Dogtag is
patched to allow for N certs with the same nickname, and this test
is to verify that CADogtagCertsConfigCheck still passes.
Related: https://github.com/dogtagpki/pki/pull/4285
Signed-off-by: Chris Kelley <ckelley@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This test is located outside of the TestACMEPrune because
it enables RSNv3 while the server installed by TestACME doesn't.
It still needs a wrapper to enforce a version of PKI that
supports pruning because that is checked first in the tool.
Re-ordering that wouldn't be a good user experience.
https://pagure.io/freeipa/issue/9322
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Fix 1: timeout field was being checked twice and did not return fail code on error
Fix 2: Tool did not return error code on single file check unsuccessful run
Signed-off-by: David Pascual <davherna@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Configures PKI to remove expired certificates and non-resolved
requests on a schedule.
This is geared towards ACME which can generate a lot of certificates
over a short period of time but is general purpose. It lives in
ipa-acme-manage because that is the primary reason for including it.
Random Serial Numbers v3 must be enabled for this to work.
Enabling pruning enables the job scheduler within CS and sets the
job user as the IPA RA user which has full rights to certificates
and requests.
Disabling pruning does not disable the job scheduler because the
tool is stateless. Having the scheduler enabled should not be a
problem.
A restart of PKI is required to apply any changes. This tool forks
out to pki-server which does direct writes to CS.cfg. It might
be easier to use our own tooling for this but this makes the
integration tighter so we pick up any improvements in PKI.
The "cron" setting is quite limited, taking only integer values
and *. It does not accept ranges, either - or /.
No error checking is done in PKI when setting a value, only when
attempting to use it, so some rudimentary validation is done.
Fixes: https://pagure.io/freeipa/issue/9294
Signed-off-by: Rob Crittenden rcritten@redhat.com
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Avoid reading platform specific `/etc/resolv.conf` in `TestDNSResolver`
unit tests. Systems (e.g. sandboxes) may not have `/etc/resolv.conf`
or this file may not contain any configured name servers.
`TestDNSResolver` unit tests check only customized `nameservers`
property and should not depend on existence of `/etc/resolv.conf`.
Resolver accepts `configure` option.
https://dnspython.readthedocs.io/en/latest/resolver-class.html :
> configure, a bool. If True (the default), the resolver instance is
configured in the normal fashion for the operating system the resolver
is running on. (I.e. by reading a /etc/resolv.conf file on POSIX
systems and from the registry on Windows systems.)
Fixes: https://pagure.io/freeipa/issue/9319
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
freeipa-healthcheck changed some messages related to ipa-ca
DNS record validation in IPADNSSystemRecordsCheck. Include support
for it and retain backwards compatibility.
Fixes: https://pagure.io/freeipa/issue/9291
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
freeipa-healthcheck 0.12 includes a SUCCESS message if the
ipa-ca records are as expected so a user will know they
were checked. For that version and beyond test that it
is included.
Related: https://pagure.io/freeipa/issue/9291
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
freeipa-healthcheck prechecks existance of `fips-mode-setup` and
reports if it's missing:
> "fips": "missing /bin/fips-mode-setup"
Fixes: https://pagure.io/freeipa/issue/9315
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
PKI can issue ACME certs only when the key type is rsa.
With version 2.0.0, certbot defaults to ecdsa key type,
and this causes test failures.
For now, force rsa when requesting an ACME certificate.
This change can be reverted when PKI fixes the issue
on their side (https://github.com/dogtagpki/pki/issues/4273)
Related: https://pagure.io/freeipa/issue/9298
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Mark the test test_smb.py::TestSMB::test_smb_service_s4u2self as xfail.
Related: https://pagure.io/freeipa/issue/9124
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
https://pylint.pycqa.org/en/latest/user_guide/messages/error/unhashable-member.html:
> Emitted when a dict key or set member is not hashable (i.e. doesn't
define __hash__ method).
https://docs.python.org/3/library/stdtypes.html#dict.update:
> Update the dictionary with the key/value pairs from other, overwriting
existing keys. Return None.
update() accepts either another dictionary object or an iterable of
key/value pairs (as tuples or other iterables of length two). If keyword
arguments are specified, the dictionary is then updated with those
key/value pairs: d.update(red=1, blue=2).
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
https://pylint.pycqa.org/en/latest/user_guide/messages/convention/unnecessary-lambda-assignment.html:
> Used when a lambda expression is assigned to variable rather than
defining a standard function with the "def" keyword.
https://peps.python.org/pep-0008/#programming-recommendations:
> Always use a def statement instead of an assignment statement that
binds a lambda expression directly to an identifier:
def f(x): return 2*x
f = lambda x: 2*x
The first form means that the name of the resulting function object is
specifically ‘f’ instead of the generic ‘<lambda>’. This is more useful
for tracebacks and string representations in general. The use of the
assignment statement eliminates the sole benefit a lambda expression can
offer over an explicit def statement (i.e. that it can be embedded
inside a larger expression)
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
> Emitted when a local variable is accessed before its assignment took
place. Assignments in try blocks are assumed not to have occurred when
evaluating associated except/finally blocks. Assignments in except
blocks are assumed not to have occurred when evaluating statements
outside the block, except when the associated try block contains a
return statement.
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
`pipes` module is deprecated as of Python 3.11.
https://docs.python.org/3/library/pipes.html#module-pipes:
> Deprecated since version 3.11, will be removed in version 3.13: The
pipes module is deprecated (see PEP 594 for details).
IPA code used only `quote` function from `pipes` that in turn is
the alias for `shlex.quote` since Python 3.3:
9bce311ea4
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Most of `cyclic-import` issues reported by Pylint are false-positive
and they are already handled in the code, but several ones are the
actual errors.
Fixes: https://pagure.io/freeipa/issue/9232
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
PEP 632 deprecates the distutils module. Replace
- distutils.spawn.find_executable with shutil.which
- distutils.log with logging
Related: https://pagure.io/freeipa/issue/9278
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The newer version of pylint has fixed false positives and
does not need anymore these suppressions:
- global-variable-not-assigned
- invalid-sequence-index
- no-name-in-module
- not-callable
- unsupported-assignment-operation
Related: https://pagure.io/freeipa/issue/9278
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The test is failing on fedora 36+, update and simplify the
xfail condition.
Related: https://pagure.io/freeipa/issue/9135
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
The test ipatests/test_integration/test_fips.py is faking
FIPS mode and calls "openssl md5" to ensure the algo is
not available in the fake FIPS mode.
The error message has been updated with openssl-3.0.5-5.
In the past the command used to return:
$ openssl md5 /dev/null
Error setting digest
140640350118336:error:060800C8:digital envelope routines:EVP_DigestInit_ex:disabled for FIPS:crypto/evp/digest.c:147:
And now it returns:
$ openssl md5 /dev/null
Error setting digest
00C224822E7F0000:error:0308010C:digital envelope routines:inner_evp_generic_fetch:unsupported:crypto/evp/evp_fetch.c:349:Global default library context, Algorithm (MD5 : 97), Properties ()
00C224822E7F0000:error:03000086:digital envelope routines:evp_md_init_internal:initialization error:crypto/evp/digest.c:252:
To be compatible with all versions, only check the common part:
Error setting digest
Mark the test as xfail since installation is currently not working.
Related: https://pagure.io/freeipa/issue/9002
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
With the new fedora36 vagrant image, the test is also failing.
Mark xfail for all fedora versions.
Related: https://pagure.io/freeipa/issue/9264
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Scott Poore <spoore@redhat.com>
The memory requirements are defined in the vagrant templates in
https://github.com/freeipa/freeipa-pr-ci/tree/master/templates/vagrantfiles
They have been updated and the corresponding values must be
kept consistent in the topologies for PRCI.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
The test wants to check the error related to an
exception obtained inside a "with pytest.raises" instruction.
The object is an ExceptionInfo and offers a match method
to check the content of the string representation.
Use this match() method instead of str(excinfo) which now
returns
'<ExceptionInfo NoSuchElementException() tblen=10>'
Fixes: https://pagure.io/freeipa/issue/9282
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
The IPA location system relies on DNS record priorities in order to give
higher precedence to servers from the same location. For Kerberos, this
is done by redirecting generic SRV records (e.g.
_kerberos._udp.[domain].) to location-aware records (e.g.
_kerberos._udp.[location]._locations.[domain].) using CNAMEs.
This commit applies the same logic for URI records. URI location-aware
record were created, but there were no redirection from generic URI
records. It was causing them to be ignored in practice.
Kerberos URI and TXT records have the same name: "_kerberos". However,
CNAME records cannot coexist with any other record type. To avoid this
conflict, the generic TXT realm record was replaced by location-aware
records, even if the content of these records is the same for all
locations.
Fixes: https://pagure.io/freeipa/issue/9257
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The tests calling sssctl domain-status were marked xfail
because of SSSD issue #6331. Now that the issue is fixed
and freeipa bumped sssd required version, remove the xfail
annotation.
Related: https://pagure.io/freeipa/issue/9234
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On fedora 37+ the dnssec tests were broken. The tests
launched for each pull request were disabled or marked
as xfail.
With the bump of bind version, they should now succeed
and can be re-enabled.
Related: https://pagure.io/freeipa/issue/9216
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The ``ipa-client-install`` command now supports PKINIT for client
enrollment. Existing X.509 client certificates can be used to
authenticate a host.
Also restart KRB5 KDC during ``ipa-certupdate`` so KDC picks up new CA
certificates for PKINIT.
*Requirements*
- The KDC must trust the CA chain of the client certificate.
- The client must be able to verify the KDC's PKINIT cert.
- The host entry must exist. This limitation may be removed in the
future.
- A certmap rule must match the host certificate and map it to a single
host entry.
*Example*
```
ipa-client-install \
--pkinit-identity=FILE:/path/to/cert.pem,/path/to/key.pem \
--pkinit-anchor=/path/to/kdc-ca-bundle.pem
```
Fixes: https://pagure.io/freeipa/issue/9271
Fixes: https://pagure.io/freeipa/issue/9269
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Test user and pwpolicy entity for grace login limit setting.
Related: https://pagure.io/freeipa/issue/9211
Signed-off-by: Erik Belko <ebelko@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Check if there is no infinite loop caused by this
combination of user and password
Related: https://pagure.io/freeipa/issue/9226
Signed-off-by: Erik Belko <ebelko@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
There is a crash occurring that causes Keycloak to be unable to
communicate with ipa-tuura on the bridge server (replica0). This is
much more prevalent in Fedora 37 so we need to xfail that test case
until the crash is resolved.
Related: https://pagure.io/freeipa/issue/9264
Signed-off-by: Scott Poore <spoore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Adding test case to test_sso.py to cover login to IPA client as Keycloak
user without relying on external IdP.
create_bridge.py:
- getkeytab in setup_scim_server to allow bridge to use IPA API.
- fix unintstall to remove plugin by version instead of main
test_sso.py:
- add keycloak_add_user function
- add test_ipa_login_with_sso_user
tasks.py:
- add set_user_password to only set password for ipa users
Fixes: https://pagure.io/freeipa/issue/9250
Signed-off-by: Scott Poore <spoore@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The webui test test_subid_range_deletion_not_allowed is
adding a new subid for the admin user but a previous
test already took care of that step.
Remove the call adding the subid.
2nd issue: a given record has to be selected in
order to check that there is no "delete" button.
Fixes: https://pagure.io/freeipa/issue/9214
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Test scenario:
configure sssd with ldap_group_name = info for the trusted domain,
so that the group name is read from the "info" attribute
of the AD group entry.
With this setting, it is possible to have a group and a user
that appear on IdM side with the same name.
Ensure that the conflict does not break IdM and that the id,
getent group and getent passwd commands work on an IdM client.
Related : https://pagure.io/freeipa/issue/9127
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Previously the message was:
"\n\nIn Directory Server, we offer one hash suitable for this "
"(PBKDF2_SHA256) and one hash\nfor \"legacy\" support (SSHA512)."
"\n\nYour configuration does not use these for password storage "
"or the root password storage\nscheme.\n"
but now the message is:
\n\nIn Directory Server, we offer one hash suitable for this "
"(PBKDF2-SHA512) and one hash\nfor \"legacy\" support (SSHA512)."
"\n\nYour configuration does not use these for password storage "
"or the root password storage\nscheme.\n"
PBKDF2_SHA256 has been replaced with PBKDF2-SHA512
Pagure: https://pagure.io/freeipa/issue/9238
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
OpenLDAP has made it explicit to use default CA store as provided by
OpenSSL in 2016:
branches 2.5 and later:
commit 4962dd6083ae0fe722eb23a618ad39e47611429b
Author: Howard Guo <hguo@suse.com>
Date: Thu Nov 10 15:39:03 2016 +0100
branch 2.4:
commit e3affc71e05b33bfac43833c7b95fd7b7c3188f8
Author: Howard Guo <hguo@suse.com>
Date: Thu Nov 10 15:39:03 2016 +0100
This means starting with OpenLDAP 2.4.45 we can drop the explicit CA
configuration in ldap.conf.
There are several use cases where an explicit IPA CA should be specified
in the configuration. These mostly concern situations where a higher
security level must be maintained. For these configurations an
administrator would need to add an explicit CA configuration to
ldap.conf if we wouldn't add it during the ipa-client-install setup.
RN: FreeIPA client installer does not add explicit TLS CA configuration
RN: to OpenLDAP's ldap.conf anymore. Since OpenLDAP 2.4.45, explicit CA
RN: configuration is not required as OpenLDAP uses the default CA store
RN: provided by OpenSSL and IPA CA is installed in the default store
RN: by the installer already.
Fixes: https://pagure.io/freeipa/issue/9258
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
While python-ldap is strict dependency of IPA in downstreams, it
is optional for IPA packages published on PyPI.
Openldap 2.6 no longer ships ldap_r-2, that makes
ipapython.dn_ctypes not working against such environments.
Thanks @abbra!
Fixes: https://pagure.io/freeipa/issue/9255
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In fedora 37+, the signing of DNS zones is failing.
Mark xfail the gating tests impacted by this issue, to avoid
breaking the CI gating when we move to f37.
Related: https://pagure.io/freeipa/issue/9216
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
In fedora 37+, sssctl domain-status is failing.
Mark xfail the gating tests impacted by this issue, to avoid
breaking the CI gating when we move to f37.
Related: https://pagure.io/freeipa/issue/9234
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Fedora 37 beta is now available, move the testing pipelines to
- fedora 37 for the _latest definitions
- fedora 36 for the _previous definition
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The tests must be updated to not expect the
deprecation warning messages for the 'idnssoaserial'
parameter. Those should (successfully) fail when
'dnszone_add' and 'dnszone_mod' commands are
executed with the SOA serial parameter provided.
Also, due to this SOA serial deprecation, an
expected-to-fail test should be defined when a
DNS zone is added (dnszone_add) and the SOA serial
is passed as a parameter.
Fixes: https://pagure.io/freeipa/issue/9249
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Scenario: call ipa otptoken-sync with
- an invalid password
- an invalid first token (containing non-digits)
- an invalid sequence of tokens
The test expects a return code = 1.
Related: https://pagure.io/freeipa/issue/9248
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Signed-off-by: Scott Poore <spoore@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add test code for new bridge server (ipa-tuura) and Keycloak plugin.
Add uninstall functions for create_keycloak.py so that the tests can
be run repeatedly.
Fixes: https://pagure.io/freeipa/issue/9227
Signed-off-by: Scott Poore <spoore@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
It was defined as an unsigned value (2**32) because it
originally was. During the review an additional setting of
disabled (-1) was added so the value needed to be signed.
The upper bound needs to be 2**31 which is provided by
the xmlrpc client MAXINT import.
Fixes: https://pagure.io/freeipa/issue/9243
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The test_selinuxusermap.py::test_selinuxusermap::test_misc is failing
because the 'delete_record' function (located in the same file) is passing
incorrect parameters: it should take the 'pkeys' instead of the full
data.
The changes will take the right 'pkeys' parameters in the 'test_misc()'
function.
Fixes: https://pagure.io/freeipa/issue/9161
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The module installs and configures a Keycloak server and
not just the Quarkus Java framework. So, renaming to better
reflect what the module is used for.
Fixes: https://pagure.io/freeipa/issue/9225
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This will retain previous behavior of unlimited LDAP BIND
post-expiration.
Fixes: https://pagure.io/freeipa/issue/9212
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
IPA DNS zone and forwardzone commands allow to use nameservers with ports
as "SERVER_IP port PORT_NUMBER". bind is supporting this syntax, but the
Resolver in dnspython that is used to verify the list of forwarders
(nameservers) is only allowing to have IP addresses in this list. With
dnspython version 2.20 there is a new validator in dns.resolver.BaseResolver
that ensures this.
Refs:
- https://bind9.readthedocs.io/en/v9_18_4/reference.html#zone-statement-grammar
- https://github.com/rthalley/dnspython/blob/master/dns/resolver.py#L1094
ipapython/dnsutil.DNSResolver derives from dns.resolver.Resolver. The setter
for nameservers has been overloaded in the DNSResolver class to split out
the port numbers into the nameserver_ports dict { SERVER_IP: PORT_NUMBER }.
After the setter for nameservers succeeded, nameserver_ports is set.
nameserver_ports is used in the resolve() method of dns.resolver.Resolver.
Additional tests have been added to verify that nameservers and also
nameserver_ports are properly set and also valid.
Fixes: https://pagure.io/freeipa/issue/9158
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Because the sidgen plugin is a postop plugin, it is not
always triggered before the result of an ADD is returned
and the objectclasses of the user may / may not contain
ipantuserattrs.
Fix the expected object classes.
Related: https://pagure.io/freeipa/issue/9062
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test TestInstallDNSSECFirst is failing because of one of its
dependencies (the most likely suspect is the update of openssl-pkcs11).
Disable the test from azure gating until the issue is solved.
Related: https://pagure.io/freeipa/issue/9216
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The test test_integration/test_subids.py::TestSubordinateId
needs a master and a client but the yaml definition for rawhide
and sssd is currently using master_1repl. Replace with
master_1repl_1client to fulfill the requirement.
Fixes: https://pagure.io/freeipa/issue/9217
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
New Tests include
TestRSNPKIConfig
TestRSNVault
The new tests are just extending existing classes to be run
with random serial numbers enabled
The tests also include a new method to check params set in CS.cfg for both CA and
KRA, and another test to check Random Serial Number version while
running `ipa ca-find`
Added nightly definitions
Related Ticket: https://pagure.io/freeipa/issue/2016
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This testcase checks that subid added by user admin
cannot be deleted.
Related: https://pagure.io/freeipa/issue/9150
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
In the yamllint target of makefile, prci_checker result was being masked by echo statement.
Aditionally, prci_checker script has been added to the list of Python sources to be Pylinted.
Addressing comments of recently merged PR:
https://github.com/freeipa/freeipa/pull/6301#discussion_r923163970https://github.com/freeipa/freeipa/pull/6301#issuecomment-1187037261
Signed-off-by: David Pascual <davherna@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
This testcase checks that when ipa-client-install command
is run with --subid option, /etc/nsswitch.conf file is updated
with the below entry
subid: nss
Related: https://pagure.io/freeipa/issue/9159
Since the newly added testsuite required client
system, hence modified the below yaml files to change the topology
from *master_1repl to *master_1repl_1client in the below files
gating.yaml
nightly_latest.yaml
nightly_latest_selinux.yaml
nightly_latest_testing.yaml
nightly_previous.yaml
nightly_rawhide.yaml
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Originally the code treated 0 as disabled. This was
changed during the review process to -1 but one remnant
was missed effetively allowing gracelimit 0 to also mean
disabled.
Add explicit tests for testing with gracelimit = 0 and
gracelimit = -1.
Also remove some extranous "str(self.master.domain.basedn)"
lines from some of the tests.
Fixes: https://pagure.io/freeipa/issue/9206
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Test if FIPS is enabled and the check exists.
Related: https://pagure.io/freeipa/issue/8951
Signed-off-by: Erik Belko <ebelko@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
With some recent changes the Azure Agent has decreased performance.
For example, `InstallDNSSECFirst_1_to_5` (5 subjobs) job took ~33min
and now it takes ~40min. In the same time there are jobs having only
1 or 2 subjobs and they should be used more.
Fixes: https://pagure.io/freeipa/issue/9207
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This daemon run clamav which is resource aggressive.
No point to run Windows virus scanner on Ubuntu in Linux-only
environment.
Fixes: https://pagure.io/freeipa/issue/9207
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
With some recent changes on Azure Agent the default DBus call
timeout is not good enough. For example, in case of
`InstallDNSSECFirst_1_to_5` job hostnamectl received reply in ~20sec,
but later it increased to ~30sec (more subjobs - more time to reply).
It's good to raise this timeout to be more protected against minimum
performance times.
https://www.freedesktop.org/software/systemd/man/sd_bus_set_method_call_timeout.html#Description
Fixes: https://pagure.io/freeipa/issue/9207
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This script allows developers to check if prci definition jobs have the correct format,
which is defined in prci_jobs_spec.yaml
Useful when adding new jobs to the definitions.
Signed-off-by: David Pascual <davherna@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
An ACI with rights of read, write, search and/or compare without
attributes to apply the rights to is effectively a no-op. Allow
the ACI to be created but include a warning. Ignore the add
and delete rights. While they make no sense in the context of
the other rights we should still warn that they are a no-op
with no attributes.
Use the existing make_aci() object method to create the
message and update the add/mod callers to capture and add the
message to the result if one is provided.
When updating an existing ACI the effective attributes will
not be included so fall back to the attributes in the resulting
permission.
Prior to checking for rights and attributes convert any deprecated
names for older clients into the newer values needed by make_aci
This is exercised by existing xmlrpc permission tests that
create such permissions without attributes.
https://pagure.io/freeipa/issue/9188
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Pagination size must be required, the current validators are triggered after
form is submitted, thus the only way for check if data is not empty is by making
the field required.
Fixes: https://pagure.io/freeipa/issue/9192
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The nightly test test_external_idp requires a topology
with 2 replicas. Fix the definition in nightly_latest_sssd.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Defined the tests that will be executed for SSSD's COPR nightly.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Currently the cert_dir attribute is only present if IPA installation was
done. If IPA was not installed the attribute does not exist.
In order that the uninstall code finds the attribute a class attribute
is added.
Pagure Issue: https://pagure.io/freeipa/issue/9179
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Some of the test data are not expected to cause a rewrite in
the upgrade code. Those that do will set the rewrite flag.
In that case there is a new server.xml to be read. This is
handled with mock_open(). The contents can be retrieved via
mocked_file().write.call_args but the repr() of it is:
call(b'<Server port="1234" shutdown="SHUTDOWN">\n ...')
In at least Python 3.10 one can use write.call_args.args to get
just the raw data. This does not work with Python 3.6.8 and
returns the string 'args' instead results in a TypeError.
TypeError: a bytes-like object is required, not 'str'
Instead drop the args and use the data directly.
For the case of x = mocked_file().write.call_args:
x[0] is a tuple with the first element being the data
x[0][0] is the raw data
So use x[0][0] to get at the data instead of x.args[0]
Fixes: https://pagure.io/freeipa/issue/9190
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Test if healthcheck uses cert subject base from IPA and not from
REALM. This prevents false-positive errors when the subject base is
customized.
Related: https://github.com/freeipa/freeipa-healthcheck/issues/253
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Update the expected summary for the command
ipa user-del --preserve
The command now displays: Preserved user: user1
instead of Deleted user: user1
Related: https://pagure.io/freeipa/issue/9187
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
New box contains the fixed mock configuration needed when
`enable_testing_repo` is True.
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Increase the default timeout for expect function when testing
interactive mode to mitigate an issue when the tests are failing
on the slow systems.
Fixes: https://pagure.io/freeipa/issue/9183
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Test if ipa-healthcheck complains about pki.server.healthcheck errors
when CA is not configured on the replica.
Related: https://github.com/freeipa/freeipa-healthcheck/issues/201
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Change xfail for test_replica_promotion.py/TestHiddenReplicaPromotion/test_ipahealthcheck_hidden_replica
to respect platform and pki version as the related issue is fixed.
Implement tasks/get_platform_version which returns a platform version
number(s) of a provided host in a form of a tuple.
Related: https://pagure.io/freeipa/issue/8582
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
PKI 10.10 unconditionally added an upgrade script for the AJP
connector which replaced the AJP secret regardless of tomcat
version. It replaced requiredSecret with secret. IPA expects
the attribute by version so this could make the secrets out of
date and/or have connectors with both secrets and different
values.
PKI commit e70373ab131aba810f318c1d917896392b49ff4b has since
been reverted but there may be servers with both secrets still.
On next IPA upgrade clean them up.
Also allow re-writing ipa-pki-proxy.conf in case the secret
changes to ensure they remain in sync.
Fixes: https://pagure.io/freeipa/issue/9176
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Now that IPA API properly maps LDAP boolean attributes to the
python bool type, they are displayed as True/False instead
of TRUE/FALSE in the ipa *-show outputs.
Update the expected output for DNS Active Zone.
Related: https://pagure.io/freeipa/issue/9171
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This testscase checks that when permission of
ipaserver-upgrade.log
file is changed healtcheck tool reports the correct warning message.
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Pre ipa-healthcheck 0.11, failures detected by DogtagCertsConnectivityCheck
were reported as:
"msg": "Request for certificate failed, <error>"
but the output is now the following:
"msg": "Request for certificate failed: {error}"
"error": <error>
Update the expected output to be compatible with both versions.
Fixes: https://pagure.io/freeipa/issue/9175
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In IPA framework we don't properly convert to Python bool type and just
return a string (TRUE or FALSE). This can be seen with many boolean
attributes, like
Bool('idnsallowdynupdate?',
cli_name='dynamic_update',
label=_('Dynamic update'),
doc=_('Allow dynamic updates.'),
attribute=True,
default=False,
autofill=True
),
in 'ipa dnszone-show':
> > > api.Command.dnszone_show('ipa.test')['result']['idnsallowdynupdate']
['TRUE']
This is because we don't have the reverse (from LDAP to Python) mapping
for the LDAP boolean OID 1.3.6.1.4.1.1466.115.121.1.7.
When Web UI asks for the entry, it gets back JSON output that contains
this 'TRUE' value:
"idnsallowdynupdate": [
"TRUE"
],
Add proper mapping from LDAP to Python bool type. With this, a simple
'checkbox' type can be used in Web UI instead of a complex radio-box
setup.
Note that when IPA API is asked to return raw values, 'TRUE' and 'FALSE'
still returned. These are the actual LDAP boolean attribute values. Care
needs to be done in tests:
- if output is from a command with --raw option, 'TRUE' or 'FALSE'
should be expected
- if output if from a normal (non-raw) command, True or False would be
returned
Fixes: https://pagure.io/freeipa/issue/9171
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Extend existing tests and enabled random serial numbers
during installation. A subset of tests was identified that
exercise the code sufficiently to ensure proper operation.
Update the xml-rpc test to allow the new RSN version number
attribute.
Update some certificate tests where a specifc serial number
is expected.
Fixes: https://pagure.io/freeipa/issue/2016
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Transmitting a big integer like a random serial number over
either xmlrpc or JSON is problematic because they only support
32-bit integers at best. A random serial number can be as big
as 128 bits (theoretically 160 but dogtag limits it).
Treat as a string instead. Internally the value can be treated
as an Integer to conversions to/from hex as needed but for
transmission purposes handle it as a string.
Fixes: https://pagure.io/freeipa/issue/2016
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Remove a duplicated policy change which sets the gracelimit
to 3.
We don't typically run tests individually but as a whole. If
we ever need to call this one test directly we can ignore
failures.
Fixes: https://pagure.io/freeipa/issue/9167
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The graceperiod plugin was only being enabled on new
installations. Enable also on upgrade.
Loading a new plugin requires a restart. Do so if a
new one is configured.
Fixes: https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Include functions to manage IdM service using ipactl, in particular
starting, stopping and restarting the service.
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Test for RFE: Improve error message with more detail for
ipa-replica-install command. If the replication agreement already
exists, check if the error message contains
a particular command needed to delete it.
Related: https://pagure.io/freeipa/issue/9162
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ipa subid-match should show UID of the owner instead of DN.
Related: https://pagure.io/freeipa/issue/8977
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Add support for bind grace limiting per
https://datatracker.ietf.org/doc/html/draft-behera-ldap-password-policy-06
389-ds provides for alternative naming than the draft, using those
instead: passwordGraceUserTime for pwdGraceUserTime and
passwordGraceLimit for pwdGraceLoginLimit.
passwordGraceLimit is a policy variable that an administrator
sets to determine the maximum number of LDAP binds allowed when
a password is marked as expired. This is suported for both the
global and per-group password policies.
passwordGraceUserTime is a count per-user of the number of binds.
When the passwordGraceUserTime exceeds the passwordGraceLimit then
all subsequent binds will be denied and an administrator will need
to reset the user password.
If passwordGraceLimit is less than 0 then grace limiting is disabled
and unlimited binds are allowed.
Grace login limitations only apply to entries with the objectclass
posixAccount or simplesecurityobject in order to limit this to
IPA users and system accounts.
Some basic support for the LDAP ppolicy control is enabled such that
if the ppolicy control is in the bind request then the number of
remaining grace binds will be returned with the request.
The passwordGraceUserTime attribute is reset to 0 upon a password
reset.
user-status has been extended to display the number of grace binds
which is stored centrally and not per-server.
Note that passwordGraceUserTime is an operational attribute.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Vagrant templates for `pki-`, `389ds-` and `testing-` are no longer
needed after feature added by https://github.com/freeipa/freeipa-pr-ci/pull/463.
This updates the test definitions to use PR-CI's custom arguments with
standard `ci-master-f36` vagrant box.
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Check and skip dnssec-enable-related issues in 9.18+ where dnssec-enable
option was removed completely.
Fixes: https://pagure.io/freeipa/issue/9157
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Add a new test for ipa-client-install --subid
Add a new test for ipa-server-install --subid
Related: https://pagure.io/freeipa/issue/9159
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Moving 'latest' to Fedora 36 and 'previous' to Fedora 35.
Update Rawhide template.
The following templates are updated:
- gating
- nightly_latest
- nightlñy_latest_selinux
- nightly_previous
- nightly_rawhide
- temp_commit
These are not updated as they will receive a new update after
"custom COPR" feature in PR-CI is merged:
- nightly_latest_389ds
- nightly_latest_pki
- nightly_latest_testing
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
The test test_ipahealthcheck.py::TestIpaHealthCheckWithoutDNS
is installing the server without DNS but calls the installer
with --no-dnssec-validation option.
Remove the --no-dnssec-validation option as it is incompatible
with a non-DNS setup.
Fixes: https://pagure.io/freeipa/issue/9152
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
healthcheck related tests are failing because of the below issue
"client @0x7f8ee47c4d48 : servfail cache hit (CD=0)"
and as a result healthcheck related packages are not downloaded on test
system.
Hence adding the --no-dnssec-validation option to install_master
and install_replica function
https://pagure.io/freeipa/issue/9151
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Allow npm to install and use latest grunt that is compatible with newer
OpenSSL.
This, in turn, requires ATK interfaces to be present for the chromium
installed by puppeteer.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Newer grunt will pull a PhantomJS that is compatible with newer OpenSSL
so the workaround is not needed anymore.
Additionally, OpenSSL 3.0 is more strict and does not tolerate
non-existing default configuration file.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Use fedora-toolbox:36 image as it is prepared to work with systemd and
sudo
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
subid range management does not allow to delete ranges
If subid range was allocated, it cannot be removed because there might
be file objects associated with it on one of IPA clients.
In Web UI a button to remove the range should not be shown.
Remove corresponding test from the Web UI test for subid as the button
to remove the subid range is not present anymore.
Fixes: https://pagure.io/freeipa/issue/9150
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
The test is calling getcert rekey -G DSA in order to rekey
a certificate with a DSA key, but DSA support has been disabled
in the default crypto policy, and certmonger does not support it
any more (see the BZ
https://bugzilla.redhat.com/show_bug.cgi?id=2066439)
Remove the test as it's not relevant anymore. The rekey
operation is tested anyway in other tests:
- test_certmonger_rekey_keysize
- test_rekey_keytype_RSA
- test_rekey_request_id
Fixes: https://pagure.io/freeipa/issue/9140
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Documentation generator can be run inside Python virtual environment.
This allows to isolate from the system-wide changes and add Sphinx
extensions that aren't packaged in a distribution.
The only exception right now is plantuml package. We rely on plantuml to
generate diagrams and since it is written in Java, it cannot be
installed directly into the Python venv through 'pip' tool.
Fixes: https://pagure.io/freeipa/issue/9148
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The file epn.conf has been updated when fixing issue 9145
and the test test_epn.py::TestEPN::test_EPN_config_file
is comparing its sha256sum with the checksum of the
shipped file from the package ipa-client-epn.
The expected checksum needs to be updated.
Fixes: https://pagure.io/freeipa/issue/9146
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The tests
TestNonPosixAutoPrivateGroup::test_idoverride_with_auto_private_group
and
TestPosixAutoPrivateGroup::test_gidnumber_not_corresponding_existing_group
are expected to fail until SSSD fixes issues 5988 and 5989.
They currently define an xfail_context with a condition based on
sssd version but that condition is wrong (as of today, no version
of sssd provides the fix).
Remove the wrong condition so that the test is always expected to fail.
Fixes: https://pagure.io/freeipa/issue/9141
Reviewed-By: Anuja More <amore@redhat.com>
In many cases it is impossible to investigate test failures of
environments where a trust to Active Directory is establishe without
Samba logs.
Collect Samba logs by default and make sure Samba is configured with
higher log levels if we are going to configure IPA to setup trust to
Active Directory.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
topologysegment name can be different depending on suffix.
This patch determines and supply the name of topologysgement
as per the suffix
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is no guarantee for the topologysegement name, it could be
master-to-replica or replica-to-master. If it is master-to-replica
then --right should be used with the command else --left.
Fixes: https://pagure.io/freeipa/issue/9137
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Continuation of the commit 2eee5931d7:
Use AD-SUPPORT subpolicy when testing trust to Active Directory in FIPS
mode. This is required in FIPS mode due to AD not supporting Kerberos
AES-bases encryption types using FIPS-compliant PBKDF2 and KDF, as
defined in RFC 8009.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
This test checks that when
'pki.server.healthcheck.clones.connectivity_and_data' check is run
'Source 'pki.server.healthcheck.clones.connectivity_and_data' not found'
is not displayed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2041995
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test is calling run_command with a list of arguments:
run_command(['rm', '-f', paths.CERTMONGER_REQUESTS_DIR + '/*'])
but this format does not support shell expansion.
Replace with a str parameter:
run_command('rm -fv' + paths.CERTMONGER_REQUESTS_DIR + '/*')
to make sure all the files in the directory are actually removed.
Fixes: https://pagure.io/freeipa/issue/8506
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
test_ipahealthcheck_expiring is moving the date in the future
in order to check that certmonger properly warns about expiring
certificates, then uninstalls the master.
The uninstallation randomly fails with a DBus error communicating
with certmonger because of a contention between certmonger being
waken up by the call to stop tracking certs and the certmonger
helpers trying to renew the certs.
The test is stopping PKI server, then moves the date in the future.
At this point, certmonger is still running (we are testing that
getcert list properly warns about near expiration). This means that
chances are high that certmonger has enough time to launch the CA helper
for renewal, that takes the lock. But since PKI is down, the helper
remains running for a while and does not release the lock. Then
certmonger is stopped, the tracking files are removed, certmonger is
restarted.
To avoid the contention, manually remove the tracking before
calling uninstall and remove the renewal lock file.
Fixes: https://pagure.io/freeipa/issue/9123
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This makes automount configurable only using sssd and not LDAP.
The reason is that authselect 1.3 no longer supports
user-nsswitch.conf which is where we made direct changes to the
nss configuration on Fedora/RHEL.
The equivalent option was removed from ipa-client-install in
https://pagure.io/freeipa/issue/7671
Fixes: https://pagure.io/freeipa/issue/9084
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When an entry is loaded the incoming values are converted
into python datatypes automatically based on the _SYNTAX_MAPPING
value in ipaldap.
When using delattr to remove a mapped value it will fail because
the datatypes do not match up. For example date types are
datetime.datetime structions and won't match a generalized time
string.
So try to map the value to delete using _SYNTAX_MAPPING before
trying to remove the value. Fall back to trying to remove the
raw value if the mapping fails.
This won't work for some mapping types, DNs for example. Providing
only the RDN value for a DN-type, manager for example, lacks the
context to know how to construct the DN (RDN and contaner).
Fixes: https://pagure.io/freeipa/issue/9004
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When minlife > maxlife specified on commandline, it says:
"ipa: ERROR: invalid 'maxlife': Maximum password life must be
greater than minimum."
But when minlife == maxlife specfied, It works.
This test check that error message says what exactly it does
related: https://pagure.io/freeipa/issue/9038
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
SPAKE is based on the crypto primitives which are not FIPS compliant
yet. This means that in FIPS mode use of 'hardened' authentication
indicator is not possible. Skip corresponding tests in FIPS mode.
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
paramiko cannot be used in FIPS mode. We have few tests that import
generic methods from test_otp (add_token/del_token) and those tests fail
in FIPS mode due to unconditional 'import paramiko'.
Instead, move 'import paramiko' to the ssh_2f() helper which is not used
in FIPS mode (the whole SSH 2FA test is skipped then).
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The subCA keys are loaded out-of-band after creation into the
CA so they may have been replicated but not loaded. Give more
time for them to appear in the remote CA.
Use a loop for the checking instead of a raw sleep because most
of the time this is very fast (< 15 seconds) but sometimes it
requires just a bit more. Allow up to 60 seconds.
To avoid output difference, strip the token name out of certutil
output. We don't care about the token a certificate is stored
in, the internal or the FIPS token. We just care that they exist
on both servers and that the keys match.
Apparently in some cases the token name is displayed and not in
others so lets normalize the output to make comparisons more
consistent.
Fixes: https://pagure.io/freeipa/issue/9096
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Cleanup up no longer used Pylint's disables where possible.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
As of Python3 `currentThread`, `thread.getName` are aliases for
`threading.current_thread()` and `threading.Thread.name`
respectively.
In Python3.10:
> bpo-43723: The following threading methods are now deprecated and
should be replaced:
currentThread => threading.current_thread()
activeCount => threading.active_count()
Condition.notifyAll => threading.Condition.notify_all()
Event.isSet => threading.Event.is_set()
Thread.setName => threading.Thread.name
thread.getName => threading.Thread.name
Thread.isDaemon => threading.Thread.daemon
Thread.setDaemon => threading.Thread.daemon
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> New checker consider-using-dict-items. Emitted when iterating over
dictionary keys and then indexing the same dictionary with the key
within loop body.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The klass property is referenced to class attribute.
Today's Pylint doesn't support this.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The type of value to be compared is class attribute.
Today's Pylint doesn't support this.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9 introduced new check:
> Emitted when iterating over the dictionary items (key-item pairs) and
accessing the value by index lookup. The value can be accessed directly
instead.
Note: in Python3 removing from dict during an iteration is not
possible even. For example,
```
cat a.py
d = {"a": 1}
for k, v in d.items():
if v is not None:
del d[k]
python3 a.py
Traceback (most recent call last):
File "/usr/src/RPM/BUILD/freeipa/a.py", line 3, in <module>
for k, v in d.items():
RuntimeError: dictionary changed size during iteration
```
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There is no actual usage of deprecated classes for Python3.
Pylint complains about such for Python2. Since Python2 is no
longer supported these imports were removed.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`__home` has been added in 8ca44bcbfa,
later `tests.util` was refactored in
fd43b39145, but `__home` wasn't cleaned
up.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9.0 new checker:
> Emitted when accessing only the first or last element of str.split().
The first and last element can be accessed by using str.split(sep,
maxsplit=1)[0] or str.rsplit(sep, maxsplit=1)[-1] instead.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Use AD-SUPPORT subpolicy when testing trust to Active Directory in FIPS
mode. This is required in FIPS mode due to AD not supporting Kerberos
AES-bases encryption types using FIPS-compliant PBKDF2 and KDF, as
defined in RFC 8009.
Fixes: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The test
test_integration/test_installation.py::TestInstallWithoutNamed
was missing in some nightly definitions.
Add the job definition for:
- nightly_latest_selinux.yaml
- nightly_latest_testing.yaml
- nightly_latest_testing_selinux.yaml
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The example text included a trailing dot which isn't actually
allowed in a system hostname (just DNS). Remove the suggestion
to include it and strip off any trailing dot so that the install
can proceed.
Related: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The refactor change 9094dfc had a slight error where the
user-input provided value in input wasn't being validated. Only
the command-line or the current FQDN was being verified so
if the FQDN was bad any value input by the user was being skipped.
Fixes: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Added tests using posix AD trust and non posix AD trust.
For option --auto-private-groups=[hybrid/true/false]
Related : https://pagure.io/freeipa/issue/8807
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
On RHEL tests are randomly failing because of this check
and the test doesn't need to check this.
Related : https://pagure.io/freeipa/issue/9108
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is some contention between certmonger starting during the
uninstallation process in order to stop the tracking and activity
going on within certmonger helpers.
As near as I can tell certmonger is not running, then IPA is
stopped in order to uninstall, then certmonger is started to stop
the tracking. certmonger checks cert status on startup but since
IPA isn't running it can't get a host ticket. During this time any
request over DBus may time out, causing a test to fail when we're
just trying to clean up.
https://pagure.io/freeipa/issue/8506
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This test checks that ipa-ccache-sweep.timer is enabled by default
during the ipa installation.
related: https://pagure.io/freeipa/issue/9107
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The new images include 389-ds-base 2.0.14-1
which contains the fixes for the following tickets:
389-ds-base #5079 Freeipa nightly test failure with winsync agreement
389-ds-base #5031 ipa-restore broken in selinux enforcing mode
Fixes: https://pagure.io/freeipa/issue/9069
Fixes: https://pagure.io/freeipa/issue/9051
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
OpenLDAP 2.6+ finally deprecated -h and -p options in all its command
line tools. They are not allowed anymore and cause ldap* tools to stop
hard with 'unknown option' error.
Fix this by always using -H url option instead. Deriving default value
for -H url from the configuration file still works, it is only -h and -p
that were deprecated.
See also: https://bugs.openldap.org/show_bug.cgi?id=8618
Fixes: https://pagure.io/freeipa/issue/9106
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test TestIpaClientAutomountFileRestore expects a
specific order for the automount sources to query
in /etc/nsswitch.conf.
With authselect update 1.3.0, the databases are sorted in
order of likelihood and the following line in seen:
automount: files sss
instead of
automount: sss files
Since the test doesn't care about the order but rather about
the list of sources, ignore the order.
Fixes: https://pagure.io/freeipa/issue/9067
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
FullLoader class for YAML loader was introduced in version 5.1 which
also deprecated default loader. SafeLoader, however, stays consistent
across the versions and brings added security.
This fix is necessary as PyYAML > 5.1 is not available in downstream.
Related: https://pagure.io/freeipa/issue/9009
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a test to test_config_plugin, that calls ipa config-mod
with the same value as already present in LDAP.
The call must return EmptyModlist.
Related: https://pagure.io/freeipa/issue/9063
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Added web-ui tests to verify where operations
using subordinate ids are working as expected.
Related : https://pagure.io/freeipa/issue/8361
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Following test cases would be checked:
- when called with --principal (it should then prompt for a password)
- when called with --principal / --password
- when called without principal and password but with a kerberos TGT,
kinit admin done before calling ipa-replica-conncheck
- when called without principal and password, and without any kerberos
TGT (it should default to principal=admin and prompt for a password)
related: https://pagure.io/freeipa/issue/9047
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When empty cert request is submitted to certmonger, it goes to
segfault. This fix test that if something like this happens,
certmonger should gracefuly handle it
and some PEP8 fixes
related: https://pagure.io/certmonger/issue/191
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
The test sets 389-ds nsslapd-idletimeout to 60s, then does a
kinit with an otp token (which makes ipa-otpd create a LDAP
connection), then sleeps for 60s. The expectation is that
ns-slapd will detect that the LDAP conn from ipa-otpd is idle
and close the connection.
According to 389ds doc, the idle timeout is enforced when the
connection table is walked. By doing a ldapsearch, the test
"wakes up" ns-slapd and forces the detection of ipa-otpd
idle connection.
Fixes: https://pagure.io/freeipa/issue/9044
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Fixture `expire_certs` moves date back after renewing the certs.
This is causing the ipa-replica to fail. This fix first uninstalls
the server then moves back the date.
Fixes: https://pagure.io/freeipa/issue/9052
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Signed-off-by: Timo Aaltonen <tjaalton@debian.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pkeys are not used anywhere in the method thus can be removed.
Related: https://pagure.io/freeipa/issue/9036
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
In scenario:
1. make sure that reverse zone doesn't have the desired PTR record
2. open host page of the host with matchnig the A record, e.g.: https://server.pvoborni.test/ipa/ui/#/e/host/details/test2.pvoborni.test
3. click on the "Host name" link, it will bring us to it's DNS record page. E.g., https://server.pvoborni.test/ipa/ui/#/e/dnsrecord/details/pvoborni.test&test2
! notice the missing '.' in the URL after zone name (pvoborni.test)
4. click on the A record , dialog will show up, saying "record not found"
5. click on the "create DNS record"
PTR record created by Web UI doesn't have trailing '.' (is not fully
qualified record) even if the DNS zone is.
This patch is fixing the link to the DNS Record page so that the
page then correctly gets the DNS Zone name and thus creates a correct
fully qualified PTR record.
https://bugzilla.redhat.com/show_bug.cgi?id=2009114https://pagure.io/freeipa/issue/9036
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test definition is missing the instruction to update
the packages.
Fixes: https://pagure.io/freeipa/issue/9035
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Moving 'latest' to Fedora 35 and 'previous' to Fedora 34.
Update Rawhide template.
Based on https://github.com/freeipa/freeipa-pr-ci/pull/445.
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The test failure is a known issue, happening on f33+. Mark as xfail
until 8700 is fixed.
Related: https://pagure.io/freeipa/issue/8700
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Because the sidgen plugin is a postop plugin, it is not
always triggered before the result of an ADD is returned
and the objectclasses of the user may / may not contain
ipantuserattrs.
Fix the get_user_result method to work in all the cases.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The API schema is not checked for changes until after a TTL
is expired. A one-hour TTL was hardcoded which makes development
tedious because the only way to force a schema update is to
remember to remove files between invocations.
This adds a new environment variable, schema_ttl, to configure
the TTL returned by the server to schema() calls. This can be
set low to ensure a frequent refresh during development.
If the client is in compat mode, that is if client is working
against a server that doesn't support the schema() command,
then use the client's schema_ttl instead so that the user still
has control.
Re-check validity before writing the cache. This saves us both
a disk write and the possibility of updating the expiration
with a ttl of 0. This can happen if the fingerprint is still
valid (not expired, no language change) the schema check is
skipped so we have no server-provided ttl.
https://pagure.io/freeipa/issue/8492
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Fixture issue_and_expire_cert() kinit after moving the date to
expire certs. This fix is to rely on kinit from fixture.
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The SID is not expected to be returned by ipa user-add.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Now that SID are always generated, the creation of a new
local idrange is refused if baserid is missing.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The integration tests that check backup-reinstall-restore
scenario need to clear sssd cache before checking the uid
of the admin user. For instance:
backup: saves the original admin uid
reinstall: creates a new admin uid, potentially cached by SSSD
restore: restores the original admin uid
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
From now on, new users/groups automatically get a SID.
Update the expect test outputs.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
