When the HTTP certificate gets untracked then tracked again, it
loses its pin file. Ensure we add the pin file when (re-)tracking
the HTTP certificate.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Drop the SSLProtocol directive for Fedora and RHEL systems. mod_ssl
will use crypto policies for the set of protocols.
For Debian systems configure a similar set of protocols for what
was previously configured, but do it in a different way. Rather than
iterating the allowed protocols just include the ones not allowed.
Fixes: https://pagure.io/freeipa/issue/7667
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When creating ipa-client-samba tool, few common routines from the server
installer code became useful for the client code as well.
Move them to ipapython.ipautil and update references as well.
Fixes: https://pagure.io/freeipa/issue/3999
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Debian has different paths and path suffix for font-awesome. Let's have
explicit paths for all our fonts.
Co-authored-by: Timo Aaltonen <tjaalton@debian.org>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Empty nss.conf avoids recreation of nss.conf in case `mod_nss` package is reinstalled. It is needed because by default (e.g. recreated) nss.conf has `Listen 8443` while this port is used by dogtag.
Fixes: https://pagure.io/freeipa/issue/7745
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The session directory /etc/httpd/alias/ could be created with the wrong
SELinux context. Therefore httpd was not able to write to this directory.
Fixes: https://pagure.io/freeipa/issue/7662
Related-to: 49b4a057f1 (Create missing
/etc/httpd/alias for ipasession.key)
Reviewed-By: Christian Heimes <cheimes@redhat.com>
During parallel replica installation, a request sometimes fails with
CA_REJECTED or CA_UNREACHABLE. The error occur when the master is
either busy or some information haven't been replicated yet. Even
a stuck request can be recovered, e.g. when permission and group
information have been replicated.
A new function request_and_retry_cert() automatically resubmits failing
requests until it times out.
Fixes: https://pagure.io/freeipa/issue/7623
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Service entries in cn=FQDN,cn=masters,cn=ipa,cn=etc are no longer
created as enabled. Instead they are flagged as configuredService. At
the very end of the installer, the service entries are switched from
configured to enabled service.
- SRV records are created at the very end of the installer.
- Dogtag installer only picks fully installed servers
- Certmonger ignores all configured but not yet enabled servers.
Fixes: https://pagure.io/freeipa/issue/7566
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
The directory /etc/httpd/alias contains public key material. It must be
world readable and executable, so any client can read public certs.
Note: executable for a directory means, that a process is allowed to
traverse into the directory.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In CIS hardened mode, the process umask is 027. This results in some
files not being world readable. Ensure that write_certificate_list()
calls in client installer, server installer, and upgrader create cert
bundles with permission bits 0644.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instead of multiple timeout values all over the code base, all
replication waits now use a common timeout value from api.env of 5
minutes. Waiting for HTTP/replica principal takes 90 to 120 seconds, so
5 minutes seem like a sufficient value for slow setups.
Fixes: https://pagure.io/freeipa/issue/7595
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Increase the WSGI daemon worker process count from 2 processes to 5
processes. This allows IPA RPC to handle more parallel requests. The
additional processes increase memory consumption by approximante 250 MB
in total.
Since memory is scarce on 32bit platforms, only 64bit platforms are
bumped to 5 workers.
Fixes: https://pagure.io/freeipa/issue/7587
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The site and module configs are split on Debian, server setup needs
to match that.
Fixes: https://pagure.io/freeipa/issue/7554
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
When IPA is installed with an externally signed CA, the master installer
does not publish the whole cert chain in /usr/share/ipa/html/ca.crt (but
/etc/ipa/ca.crt contains the full chain).
If a client is installed with a One-Time Password and without the
--ca-cert-file option, the client installer downloads the cert chain
from http://master.example.com/ipa/config/ca.crt, which is in fact
/usr/share/ipa/html/ca.crt. The client installation then fails.
Note that when the client is installed by providing admin/password,
installation succeeds because the cert chain is read from the LDAP server.
https://pagure.io/freeipa/issue/7526
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
mod_ssl's limiting of client cert verification depth was causing
the replica installs to fail when master had been installed with
external CA since the SSLCACertificateFile was pointing to a file
with more than one certificate. This is caused by the default
SSLVerifyDepth value of 1. We set it to 5 as that should be
just about enough even for possible sub-CAs.
https://pagure.io/freeipa/issue/7530
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The director /etc/httpd/alias was created by mod_nss. Since FreeIPA no
longer depends on mod_nss, the directory is no longer created on fresh
systems.
Note: At first I wanted to move the file to /var/lib/ipa/private/ or
/var/lib/httpd/. SELinux prevents write of httpd_t to ipa_var_lib_t. I'm
going to move the file after a new SELinux policy is available.
See: https://pagure.io/freeipa/issue/7529
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
With the recent encryption of the HTTPD keys, it's also necessary
to count with this scenario during upgrade and create the password
for the HTTPD private key along the cert/key pair.
This commit also moves the HTTPD_PASSWD_FILE_FMT from ipalib.constants
to ipaplatform.paths as it proved to be too hard to be used that way.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This commit adds configuration for HTTPD to encrypt/decrypt its
key which we currently store in clear on the disc.
A password-reading script is added for mod_ssl. This script is
extensible for the future use of directory server with the
expectation that key encryption/decription will be handled
similarly by its configuration.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
- Refactor CertDB to look up values from its NSSDatabase.
- Add run_modutil() helpers to support sql format. modutil does not
auto-detect the NSSDB format.
- Add migration helpers to CertDB.
- Add explicit DB format to NSSCertificateDatabase stanza
- Restore SELinux context when migrating NSSDB.
- Add some debugging and sanity checks to httpinstance.
The actual database format is still dbm. Certmonger on Fedora 27 does
neither auto-detect DB format nor support SQL out of the box.
https://pagure.io/freeipa/issue/7354
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Add storage='NSSDB' to various places. It makes it a bit easier to track
down NSSDB usage.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
We should backup mod_ssl configuration when migrating from nss
otherwise the uninstall would later leave the machine with
IPA-specific settings.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Adjust the HTTPInstance.__publish_ca_cert() method so that it only
exports the lowest intermediate CA certificate that signed the
HTTP certificate.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Verify the certificate issued during an installation belongs
to its private key.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Backup mod_nss configuration in case IPA is uninstalled once
and there's applications that require it. We too required it
in previous versions, after all.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The import_ca_certs_{file,nssdb} methods were actually exporting
CA certificates from LDAP to different formats. The new names should
better reflect what these methods are actually doing.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fixes ipa-server-upgrade when upgrading from a pre-mod_ssl
version where the appropriate "Include" statement needs to
be added to ssl.conf settings so that WebUI functions properly.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Part of the mod_nss -> mod_ssl move. This patch allows loading
necessary certificates for Apache to function from PKCS#12 files.
This should fix CA-less and domain level 0 installations.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This is because if backed up it may contain IPA-specific entries
like an import of ipa-rewrite.conf that on uninstall won't exist
and this will keep Apache from restarting.
We already have a backup of nss.conf from pre-install. Stick with
that.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The existing private/public keys are migrated to PEM files
via a PKCS#12 temporary file. This should work for both
IPA-generated and user-provided server certificates.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Change some built-in assumptions that Apache has an NSS certificate
database.
Configure mod_ssl instead of mod_nss. This is mostly just changing
the directives used with some slight syntactical differences.
Drop mod_nss-specific methods and functions.
There is some mention of upgrades here but this is mostly a
side-effect of removing things necessary for the initial install.
TODO:
- backup and restore
- use user-provided PKCS#12 file for the certificate and key
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instead of a package conflict, freeIPA now uses an Apache config file to
enforce the correct wsgi module. The workaround only applies to Fedora
since it is the only platform that permits parallel installation of
Python 2 and Python 3 mod_wsgi modules. RHEL 7 has only Python 2 and
Debian doesn't permit installation of both variants.
See: https://pagure.io/freeipa/issue/7161
Fixes: https://pagure.io/freeipa/issue/7394
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-server-upgrade fails with Server-Cert not found, when trying to
track httpd/ldap server certificates. There are 2 issues in the upgrade:
- the certificates should be tracked only if they were issued by IPA CA
(it is possible to have CA configured but 3rd part certs)
- the certificate nickname can be different from Server-Cert
The fix provides methods to find the server crt nickname for http and ldap,
and a method to check if the server certs are issued by IPA and need to be
tracked by certmonger.
https://pagure.io/freeipa/issue/7141
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
After commit cac3475, ipa-backup is broken due to circular
dependencies. This fixes it, removing circular dependency
of ipalib. The ipalib.constants.IPAAPI_USER is now passed
as parameter to the function that use it.
https://pagure.io/freeipa/issue/7108
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The OCSP check was previously turned on but it introduced several
issues. Therefore the check will be turned off by default.
For turning on should be used ipa advise command with correct recipe.
The solution is tracked here: https://pagure.io/freeipa/issue/6982
Fixes: https://pagure.io/freeipa/issue/6981
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Wait until the local HTTP service entry is replicated to the remote master
before requesting the server certificate.
This prevents a replication conflict between the service entry added
locally and service entry added remotely when requesting the certificate.
https://pagure.io/freeipa/issue/6867
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Make the trust flags argument mandatory in all functions in `certdb` and
`certs`.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Add named constants for common trust flag combinations.
Use the named constants instead of trust flags strings in the code.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Turn on NSSOCSP directive during install/replica install/upgrade.
That check whether the certificate which is used for login is
revoked or not using OSCP.
Marks the server cert in httpd NSS DB as trusted peer ('P,,')
to avoid chicken and egg problem when it is needed to contact
the OCSP responder when httpd is starting.
https://pagure.io/freeipa/issue/6370
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
anonymous kinit using keytab never worked so we may safely remove all
code that requests/uses it.
https://pagure.io/freeipa/issue/6830
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
There is some code duplication regarding setting ipaConfigString values
when:
* LDAP-enabling a service entry
* advertising enabled KDCProxy in LDAP
We can delegate the common work to a single re-usable function and thus
expose it to future use-cases (like PKINIT advertising).
https://pagure.io/freeipa/issue/6830
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
CertDB would have always created a directory on initialization. This
behavior changes here by replacing the truncate argument with create
which will only create the database when really required.
https://pagure.io/freeipa/issue/6853
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Previously system users needed by FreeIPA server services was created during
ipa-server-install. This led to problem when DBus policy was configured during
package installation but the user specified in the policy didn't exist yet
(and potentionally similar ones). Now the users will be created in package %pre
section so all users freeipa-server package needs exist before any installation
or configuration begins.
Another possibility would be using systemd-sysusers(8) for this purpose but
given that systemd is not available during container build the traditional
approach is superior.
Also dirsrv and pkiuser users are no longer created by FreeIPA instead it
depends on 389ds and dogtag to create those users.
https://pagure.io/freeipa/issue/6743
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
