This commit only moves the code from ipa-client-install to module
ipaclient/install/client.py and fixes PEP8.
https://fedorahosted.org/freeipa/ticket/6392
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The only useful file is /etc/ipa/kdcproxy/kdcproxy.conf so I've removed
the other copy of the file in /usr.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
These directories were not used at all.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
At the time of this writting
https://fedoraproject.org/wiki/Packaging:Guidelines#Manpages
says this:
When installing man pages, note that they should be installed uncompressed
as the build system will compress them as needed. The compression method
may change, so it is important to reference the pages in the %files section
with a pattern that takes this into account:
%{_mandir}/man1/foo.1*
Removing the compression also allows to remove several install-data-hook
targets from Makefile.am files.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Directory creating was moved from SPEC file to install-data-hook.
At the same time, it is using systemd-tmpfiles to create the directories
so we do not risk any inconsistency between SPEC file and tmpfilesd
configuration.
systemd-tmpfiles call is non-critical on purpose: The build would fail
when run under unprivileged user because systemd-tmpfiles tries to
change ownership. Luckily it creates all the files and just do not
change ownership so it works even under unprivileged user.
Interestingly, systemd-tmpfiles continues if user does not have
sufficient permissions to change ownership but fails if target username
does not exist at all. For this reason there is BuildRequires on httpd.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
At the same time, I've renamed tmpfilesd config file to static name
"ipa.conf" instead of using package-specific name. It had no purpose
and just complicated build and packaging.
Variable substitution into configuration has to be done in Makefile
and not in Autoconf as documented in:
Autoconf v2.69 manual chapter 4.8.2 Installation Directory Variables:
... Most of these variables have values that rely on prefix or
exec_prefix. ... Similarly, you should not rely on AC_CONFIG_FILES
to replace bindir and friends in your shell scripts and other files;
instead, let make manage their replacement.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
BASH completion is now installed by make install.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The name from configure.ac is used when generating tarball.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This version builds only one version of Python packages. If you want to
build for Python 2 & 3 call configure twice using different --with-python
or specify PYTHON variable when calling make.
dist-hook is using SOURCES.txt file from egg-info.
According to Petr Viktorin this should be enough for our purposes
and avoids need to create plugins for setuptools.
Currently VPATH builds do not work for various reasons.
This should be fixed later on.
Most credit goes to these guys:
Christian Heimes <cheimes@redhat.com>
Petr Viktorin <pviktori@redhat.com>
Kevin Brown <kevin@kevin-brown.com>
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The neither build nor dist targets work completely. This is temporary
breakage enabling further work.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Version information is now in VERSION.m4 instead of VERSION.
Makefile target version-update was minimized and configure can be run
before make. Makefile temporarily contains hardcoded version which has
to match the one specified in VERSION.m4.
This is preparatory step which will allow us to replace hand-made
Makefile with one generated by Automake.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
On pwpolicy module import, "klist -V" is run to determine if the installed
krb5 version supports account lockout (>= 1.8).
Remove the check, as we require a krb5 version which does support account
lockout (1.12).
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
The configure script checks for libcurl, but it is never actually used
anywhere.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Add import hook to makeapi and makeaci which makes them ignore import
errors in modules in our source tree and instead print a warning.
This makes it possible to build IPA without having to have most of our
runtime dependencies installed.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Instead of importing ipalib to get IPA version string, create setup.py from
a template and have the version string automatically filled in.
This makes it possible to build the ipaserver package without having to
have ipalib dependencies installed.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Lint is never executed from rpmbuild, so the BuildRequires for lint are
purely informational.
Include them only if %with_lint RPM macro is specified.
Update .travis.yml accordingly.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
The original approach with __path__ implemented
by 8f98fa1bd5 broke Pylint:
We decided to resort back to symlinks as it is easiest solution
which does not break pylint in weird ways.
This commit introduces configure --with-ipaplatform option.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This broke ONLY_CLIENT option in SPEC file. It will be fixed later on.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Top-level Makefile is still not managed by Automake (e.g. hand-made).
This is preparatory work. Other configure.ac files will be gradually
merged into the top-level one. After that we will be able to throw-away
the hand-made top-level Makefile and use Automake for everything.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Previously the value was sometimes lost. This was causing problems in
later stages of refactoring.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Require Dogtag 10.3.5-6, which is the first release that implements
revocation of lightweight CA signing certificates upon deletion.
Part of: https://fedorahosted.org/freeipa/ticket/6256
Reviewed-By: Martin Basti <mbasti@redhat.com>
The patch implements several test cases testing the enforcement
of CA ACLs on certificate requests with subject alternative names.
https://fedorahosted.org/freeipa/ticket/6366
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
If ipa-client-install is executed with --no-sssd, check if pam_krb5 is
available before proceeding with the install.
https://fedorahosted.org/freeipa/ticket/5557
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
There is no notable package size cost, as all the libraries and
packages are already in the freeipa-client package and
freeipa-admintools only contained a short shim calling this code.
Move /bin/ipa to freeipa-client, along with a man page and bash
completion.
Resolves: https://fedorahosted.org/freeipa/ticket/5934
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Allow upgrade process to include schema files from third-party plugins
installed in /usr/share/ipa/schema.d/*.schema.
The directory /usr/shar/eipa/schema.d is owned by the server-common
subpackage and therefore third-party plugins should depend on
freeipa-server-common (ipa-server-common) package in their package
dependencies.
Resolves: https://fedorahosted.org/freeipa/ticket/5864
Reviewed-By: Martin Basti <mbasti@redhat.com>
Fix for accidentally pushed commit c15ba1f9e8
During install we call sshd with no config file, sometimes leading to it
complaining about missing files or bad config options. Since we're just
looking for the return code to see if the options are correct, we can
discard these error messages.
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Remove the conflict, as bind-chroot caused issue only on systems with older
bind and bind-chroot - e.g. RHEL 6.
This reverts commit 3ab63fa6ba.
https://fedorahosted.org/freeipa/ticket/5696
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Also put jsl into dependencies.
The patch also split lint target into more smaller targets.
The purpose of this change is to add possibility to run only
fast jslint by using make jslint and don't waste time with pylint,
which can take a lot of time.
https://fedorahosted.org/freeipa/ticket/6161
Reviewed-By: Martin Basti <mbasti@redhat.com>
Prevents sshd from producing warning messages on package upgrade because
not all of the default host key files (/etc/ssh/ssh_host_dsa_key,
/etc/ssh/ssh_host_ecdsa_key, /etc/ssh/ssh_host_ed25519_key and
/etc/ssh/ssh_host_rsa_key) are present.
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Required features that were expected to be released in Dogtag 10.3.4
have instead been released for Fedora in 10.3.3-3. Retract the
minimum required version.
https://fedorahosted.org/freeipa/ticket/5956
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Bundle remote plugin interface definitions for servers which lack API
schema support. These server API versions are included:
* 2.49: IPA 3.1.0 on RHEL/CentOS 6.5+,
* 2.114: IPA 4.1.4 on Fedora 22,
* 2.156: IPA 4.2.0 on RHEL/CentOS 7.2 and IPA 4.2.4 on Fedora 23,
* 2.164: IPA 4.3.1 on Fedora 23.
For servers with other API versions, the closest lower API version is used.
https://fedorahosted.org/freeipa/ticket/4739
Reviewed-By: David Kupka <dkupka@redhat.com>
The conflicts should have constant version in it because it is related
to package split.
https://fedorahosted.org/freeipa/ticket/6004
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Dogtag has been updated to support a default OCSP URI when the
profile includes AuthInfoAccess with URI method but does not specify
the URI (instead of constructing one based on Dogtag's hostname and
port).
Add the pkispawn config to ensure that the OCSP URI is set before
issuing CA and system certificates, and add the config to existing
CA instances on upgrade.
Fixes: https://fedorahosted.org/freeipa/ticket/5956
Reviewed-By: Martin Basti <mbasti@redhat.com>
mod_auth_gssapi > 1.4.0 implements support for unique ccaches names.
Without it ccache name is derived from pricipal name.
It solves a race condition in two concurrent request of the same
principal. Where first request deletes the ccache and the second
tries to use it which then fails. It may lead e.g. to a failure of
two concurrent ipa-client-install.
With this feature there are two ccaches so there is no clash.
https://fedorahosted.org/freeipa/ticket/5653
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
ipapwd_extop allows to update the password on a specific entry, identified by its DN.
It can be usefull to support virtual DN in the extop so that update of a virtual entry
would land into the proper real entry.
If a pre-extop sets the TARGET_DN, ipapwd_extop sets ORIGINAL_DN with the value
of TARGET_DN, instead of using the original one (in the ber req)
There is a dependency on slapi-nis >= 0.56-0.1 (https://fedorahosted.org/freeipa/ticket/5955)
https://fedorahosted.org/freeipa/ticket/5946
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
